Lost serial number for microsoft office and can't reinstall on new hard drive

I recentlyt had to replace the hard drive on MacBook Pro and can't reinstall Microsoft Office because I don't have the required  serial #. I think it was originally installed when I bought the computeer at an Apple store. Any ideas about how to solve this problem?

Try contacting MS and see if they have the registration code since they had to activate it originally.
Do you have the receipt from your original purchase?  That will itemize what was installed beyond the packaged operating system material.  That will add proof of purchase.

Similar Messages

  • Adobe doesn't recognize my serial number for photoshop CS and can't download CS3

    Please help

    Check with Customer Care. They may allow you to activate the upgrade using the Challenge Code method.
    Apparently, Adobe has a challenge code system.  So, if you have the old serial number from the upgrade and you call customer support.  Customer support has a challenge code procedure where they give you a code that overrides the problem.  Unfortunately, it took me 5 calls to customer support before I found someone who knew how to do it.  The key term is "Challenge Code"
    800-833-6687
    Monday—Friday, 5am—7pm PT
    or
    866-772-3623
    Or try a chat session Contact Customer Care

  • I lost my serial number for photoshop elements11 and premiere elements 11 combo.  how can I obtain a serial number for this program?

    I lost my serial number for photoshop elements11 and premiere elements 11 combo.  how can I obtain a serial number for this program?

    If you registered the software you should be able to find the serial number thru your Adobe account online.
    To locate the serial number:
    http://helpx.adobe.com/x-productkb/global/find-serial-number.html

  • HT1267 I HAVE ONLY MY SERIAL NUMBER FOR IPHONE 4 AND NEED TO KNOW IMEI , I HAVE LOST THE PHONE

    I HAVE ONLY MY SERIAL NUMBER FOR IPHONE 4 AND NEED TO KNOW IMEI , I HAVE LOST THE PHONE

    Open iTunes on the computer you sync with, go to Preferences, on the Devices tab hover your mouse over your backup.  A pop-up will appear showing you your IMEI number.

  • How can I locate my serial number for the Student and Teacher Edition

    All I am trying to do right now is to obtain the serial number for my Student and Teacher (Academic) Edition <removed by moderator>, but I wanted to use my personal (home) e-mail address since this purchase is to be installed on my home computer.  The validation process seems to require my work e-mail address or a work id with embossed date (ours had no date and my id is at work).  The e-mail prompt indicates that all e-mail correspondence will go to the address I enter so if there is e-mail regarding this installation, on my home computer at my home e-mail address, any such e-mail instructions would then go to my work e-mail address.  So how do I obtain my serial number?

    I have removed your coupon/product code as this is a public forum.  I would recommend reviewing the I have a Student and Teacher edition product section of Find a serial number.

  • My iPhone 4 was stolen, how do i lock it permanently using a serial number for instance so nobody can use it or access my personal information, knowing that the thief knows my personal passcode.. Please help, Thanx

    My iPhone 4 was stolen, how do i lock it permanently using a serial number for instance so nobody can use it or access my personal information, knowing that the thief knows my personal passcode.. Please help, Thanx

    You cannot lock it by the serial number. Report it to your carrier and the police. You said that the thief knows your pass code. Does that mean that the thief was a personal friend who would be close enough to you to know what your code was? If that is the case, ask your friend to return your phone.

  • I got this error message when I want to activate the CS6. The error message is "We are unable to validate this serial number for CS6 Design and web Premium. Please contact "Customer Support ""

    I got this error message when I want to activate the CS6. The error message is "We are unable to validate this serial number for CS6 Design and web Premium. Please contact "Customer Support ""

    Hi islandschool,
    Please try the suggestion given in the link:- http://helpx.adobe.com/creative-suite/kb/unable-validate-serial-number-ccm.html
    Regards,
    Sarika

  • I have downloaded updates for microsoft office and now the internet wont work - any ideas?

    I have downloaded updates for microsoft office and now the internet wont work - any ideas?

    If you want to simply do a 'fresh' install (versus wiping out all of your data and doing a 'clean' install) simply boot to your Recovery partition (hold down the Command and R keys whilst booting) and when the Recovery screen appears, elect to freshly install OS X.
    Don't know that will solve your problem, though... did you do the 'automatic' update or download the update as a disk image (.dmg)? I wouldn't think that would be causing your problems...
    Clinton

  • I want to find out how to retrieve the serial number for my product. i can't find it in my email

    i want to find out how to retrieve the serial number for my product. i can't find it in my email

    Find your serial number quickly

  • I have serial number for Lightroom 5 and the 30 day trial need a place to activate

    I have serial number for Lightroom 5 and the 30 day trial need a place to activate

    This is where the problem is I already installed the Trial version but not the one I should have.   On their download site it shows
    how many days that are left  of the 30 days.   Wont let me do trial again will I have to finish my trial time?  you don't get any help from someone from Adobe it is a circle jerk of musical chairs. Thank You for your help God's blessing on you!
    JimHess <[email protected]> wrote:
    =============
    JimHess  created the discussion
    "I have serial number for Lightroom 5 and the 30 day trial need a place to activate"
    To view the discussion, visit: https://forums.adobe.com/message/6986791#6986791

  • Can I order a recovery disc for my HPG72 259WM and use it on the new hard drive?

    My hard drive crashed on my G72 259WM and I did not have a recovery disc.  If I order a recovery disc can I load that on my new hard drive to get my computer up and going?
    This question was solved.
    View Solution.

    Hi
    Yes you may order the Recovery disc and install it on your new Hard drive you have two option to order the disc either you could call HP Technical support and order the disc or you can click on the link given below to order the part.
    Order Recovery Discs for Windows 7, Vista, or XP
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you plea

    I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?

    You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
    Clean Install of Snow Leopard
    Be sure to make a backup first because the following procedure will erase
    the drive and everything on it.
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. After you finish Setup Assistant will complete the installation after which
             you will be running a fresh install of OS X.  You can now begin the update process
             by opening Software Update and installing all recommended updates to bring your
             installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • I have Windows 8.1.  I have had MageMaker 7.0.1 working fine on desktop for MANY years.  Had to get a new hard drive.  Now computer doesn't read the PM DVD. so I can't reinstall it.  Can anyone help?

    I have Windows 8.1.  I have had PageMaker 7.0.1 working fine on desktop for MANY years.  Had to get a new hard drive.  Now computer doesn't read the PM DVD. so I can't reinstall it.  Can anyone help?

    Sorry, but the chance of ever getting PM to work on Windows 8 is somewhere
    near zero.
    Buy a very old computer or move to a new application.

  • Can I restore a new hard drive from a previous time machine back-up?

    Hi there,
    My MacBook Pro 13 inch is 4 years old.
    The computer began to freeze/stop working, so I took it to an Apple care centre and they informed that my hard drive has crashed and has to be replaced.
    Luckily, I backed up my old hard drive a few days before with an external hard drive using Time Machine. My question is: can I restore this new hard drive with my old time machine backup that is on my external hard drive? If so, how do I do this?
    Thanks

    Of course! If you couldn't, Time Machine would be rather worthless, now wouldn't it?
    For instructions, see:
    How do I restore my entire system?

  • MBP 5.5 can't see my new Hard drive

    MBP 5.5 can't see my new Hard drive even though its running Mavericks off the new Hard Drive through a usb cradle

    I've seen suffienct posts on this site to not argue about the problems with SATA cables, however it sounds like what you're saying is that the SATA cable is bandwidth limited. The types of things I remember reading about are actual breaks in the cable, rendering it useless for all drives, or the insulation wearing off. In the latter, it's on units where the cable crosses over an optical drive and starts intermittently shorting out on the case. If this happens the user typically gets data corruption, but the drive is usually seen and visible.
    On the other hand, I do software development and we have to be able to boot numerous versions of MacOS. For reasons known only to God (and Apple, I hope) once in a while the NVRAM seems to get mixed up and ends up being unable to see the boot drive. Doing the resets always corrects the problem.
    I wouldn't dismiss your recommendation of replacing the cable, but the resets are free and easily done.
    Another freebee to try would be to hold down the "alt' key before powering on the unit, turn on the power, and then, while holding down the alt key, see if the drive shows up as a bootable drive. This will only work if there's an OS installed on the drive.
    In my opinion, it's always best to try the free things before going out and buying anything.

Maybe you are looking for

  • Hard drive problems - cant repair HDD

    Hi! Ealier today I left my MacBook Pro to download som things while I was going uot for a while. And when I came back and woke up the display it wouldent wake properly. just running the screensaver with the "I'm thinking"-rainbowdisk for a mouse icon

  • Run-Time Engine Installati​on ?

    I currently have LabVIEW Developer Suite 6.0 for both PC (Windows NT/2000) and the Mac OS . We are developping a number of executables that will be run on Windows NT 4.0 hosts . I have a few questions. 1.) Is there an installer for the run-time engin

  • Need Trigger that format a field based on two other fields

    Hello! I need to write a trigger, that reads on field and made some changes to it and saves the result in an other field in the same row. The trigger should work in insert and update cases. Does anybody can send me a frame, where i can fill my logic?

  • Hardware inventory Extension - to include Win32_Logicaldisk Class

    Hi,  We have an requirement to extend HW inventory class in SCCM 2012, Since it is grayed out I am unable to add the Win32_Logicaldisk Class. Is there a way I can go about adding this inventory class for HW Inventory from GUI This is performed from t

  • XML Tree structure

    Hi there, I am in a datastructures class and we're supposed to create classes to represent an XML hierarchy in java. There is a base class that is inherited by the different node types (Document, Element, Text). Unfortunately I am running into an iss