Lotus Notes and Network access slow

I'm new to this environment and when I arrived I notices that all switches are trunk to one 6509 core switch, which is fine. The 6513 switch is the server farm switch and also the aggregation switch. the issue is sometimes sme users Lotus Notes and Network access is really slow, uer need spend to 5 min to log in Lotus Notes. this problem is not always happen. lots of times whne i arrive users office, everytinh is fine. i check my network, i found the root of spanning tree is not 6509 core switch. is this the reason for network slow ?
please help me
thanks

You will need to ensure that spanning-tree is not
re-converging. You can do this by monitoring the logging on your switches and or syslogging. You could make the 6509 root bridge by giving it a
lower bridge value.
Spanning tree should converge and be stable, if it isn't then you need to make sure links are not coming up and down and that there are not deeper problems like loops etc. Make sure all your server links are switchport mode access and bpduguard. Things like that.
Check the links to the notes server for errors, ensure that they are the correct speed and duplex.
Use tools like ping to check round trip times to your notes server from the switch, then from an end
user.
Use a traffic sniffer like ethereal to ensure that the tcp conversations on port 1352 are timely)
A badly written view can cause big delays for your notes users.

Similar Messages

Access lotus notes and retrive emails

After lots of searching, I haven't been able to find an answer to this question. I'm try to retrive emails from lotus note and filter the mails by date. any help or suggestions will be great. thank you

You should be able to access Lotus Notes using IMAP, have you got that working?
What exactly do you mean "filter by date"? You only want to retrieve messages
before/after a certain date? Use Folder.search.

"Read" status of e-mail will not sync wirelessly between Lotus Notes and 8520??

HI,
This is my first post and I realize that this might not be the right area to post this question but my question did not seem to fit anywhere else.
I was recently issued a BB 8520 at my new company and we work in a Lotus Notes environment and I believe it is version 7.
This is not happening to anyone else that I know of in our company but when I read an e-mail in Lotus Notes from my desktop, wireless sync will not mark it read on my Blackberry. Also when I read an e-mail on my BB, it will not mark it read in Lotus Notes. However if I delete an e-mail in Lotus Notes, it will delete it from my BB via wireless sync. Finally, when my BB is attached to my desktop via USB, and I do a manual sync from Blackberry Desktop Manager, it will sync the "read" status of my e-mails between Lotus Notes and my BB.
So I guess my question is why are most sync functions working via wireless sync between my e-mail in Lotus Notes and my BB, but not the "read" status of an e-mail? And I know that it works for other users in our company so it's really bothering as it is a whipping to have check e-mails that are still marked as unread (in both Lotus Notes and my BB) when I have already read them.
Thank you and I would really appreciate any help or information that I could provide to our IT Admin at work to help him solve my problem.
Thank you,
Matt

Hi and welcome to the forums!
Looks like you posted in the right device forum and your post is very clear!
First open the main message queue, menu key options, email reconciliation, is wireless reconcile on?
Some "light reading" that may address the issue as well is attached below.
Let us know how it goes!
Thanks,
Bifocals
Unread marks synchronization is inconsistent between BlackBerry smartphone and IBM Lotus Notes
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Lotus notes and SSIS ODBC connection not working

I have created an ODBC source. I tried using this in SSIS workflow ODBC, when I test the connection, it crashes my Visual Studio 2010

Hi Kathy,
Thank you for posting in MSDN forum.
Based on your issue, could you please tell me if you connect the
Lotus notes and SSIS ODBC with ADO.NET like this following link.
https://social.msdn.microsoft.com/Forums/en-US/a6c32c6b-876a-4fd5-8faa-d6498a6755c7/updatedwhere-to-post-nonadonet-datagridview-tableadapter-odbcoledb-etc-questions?forum=adodotnetdataproviders
If possible, please share me more detailed steps about how to connect the
Lotus notes and SSIS ODBC in the VS2010.
In addition, could you please share me some crash error message in this VS2010 when test this connection?
To check if this issue is related to this VS IDE, I suggest you could try to connect
Lotus notes and SSIS ODBC on other machine and then check if you still get this issue.
(1) If you still get this crash issue, I assume that this issue is related to this connection
Lotus notes and SSIS ODBC.
(2) If you did not get same error message, I suggest you could try to restart your machine and then open this VS2010 as Admin on your local machine and then connect it check this issue again.
Please try to close the firewall software on some other progress from this Task Manager and then check this issue.
In addition, I suggest you could try to use this process monitor tool to check which process running when you test this connect.
https://technet.microsoft.com/en-us/library/bb896645.aspx?f=255&MSPPError=-2147217396
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Connection Lotus Notes and ERP 2005

Hello experts!
I have some simple questions:
- What is the procedure to connect Lotus Notes and ERP 2005 (Do we need RFC-connects or RFC/BAPI?)
- Has the SAP Business connector still any supports?

Hi,
There are couple Lotus integration products available from IBM (both pretty old but still will do the job):
<a href="http://www.thespot4sap.com/Articles/SAP_LN_Lotus_Notes_Introduction.asp">Pretty detailed blog</a>
<a href="http://www-128.ibm.com/developerworks/lotus/documentation/sapconnector/">IBM Documentation</a>
<a href="http://www.ibm.com/developerworks/lotus/library/lei-sap/">IBM Documentation on LEI</a>
They use RFC connectivity - check with IBM on support, from SAP perspective both should work.
SAP Business connector is being replaced with PI, but either are nothing to do with Lotus connectivity I think

Pushing BO inbox item to Lotus Notes and SAP Inbox.

Hi ,
Can we Push BO inbox item to Lotus Notes and SAP Inbox. if we do it then how to do it.
Thanks in Advance.
Regards,
Yagyashikha

Hi,
well you should ask your Lotus Notes administrator to setup an SMTP gateway on the LotusNotes side for you. I know that this is possible but I have not done it myself before. And since this is an SAP BusinessObjects forum I am not sure you will get an answer about this here.
Regards
Stratos
PS: I found the following link in the internet
[http://www-12.lotus.com/ldd/doc/domino_notes/Rnext/help6_admin.nsf/89d3962efd85426f85256b870069c0aa/f0e11c47fc62bc2e85256c1d00394ef9?OpenDocument]
Not sure if this applies to your version though.

Lotus Notes and SAP Business Workflow

Hi Experts!
If you have an experience or if you have SPECIFIC notes on Lotus Notes/SAP Workflow integration, please share some views on these following questions:
1. The SAP version we are using is ECC6. The client wants to upgrade their Lotus Notes client to V7.0.1 which caters Workflow integration. Do we need to have the Lotus Connector for this? (Workitem should be processed using the Lotus Notes client and there is a link where the apporover can process the workitem.)
2. What are the essential technical specifications for this this integration?
 a. Domino Server Platform
 b. Client Platform
 c. Domino Release
 d. Lotus Notes Client version
 e. Product/connector for the link.
3. What should I use for configuring the notification scenario?
 a. Extended Notifications
 b. RSWUWFML2
 c. SWN_SELSEN
Please provide answers on these.
Thank you very much. I'm generous in giving points.
Regards,
Reymar

Hi Akshay!
Am I right to affirm that according to what you've said, there is no Lotus Notes Connector needed for Lotus Notes and SAP Workflow integration?
I actually haven't tested yet the Extended Notification, but from your reply, I think you are confident enough to tell me that it is possible to have a link in the Lotus Notes mail and then this link could bring you to the Document and process it using,of course, the Extended Notification.
I'm very thankful. Have a nice day. And also, please share some notes on how too use the Extended Notification. (--,)
Best Regards,
Reymar

My company uses Lotus Notes and I need the internet brower path for Firefox so that I can enter than into Lotus Notes for it to make Firefox my borwer of choice.

My company uses Lotus Notes and I want to set Firefox as my browser in LN. It ask for internet browser path...where do I find that?

Blackboard tends to update their software once a year, before the start of the fall term, and most of the time they seem to be a year behind the current versions of Firefox. Another problem that crops up with Blackboard is that not all schools use the latest version of the Blackboard software, many schools since 2008 have been postponing updates for the software that they use due to the economy.
Quite honestly, until Mozilla comes up with a Long Term Support version ''(if they do that)'' this situation of company's like Blackboard falling behind the curve of Firefox updates is only going to get worse.
As far as Lotus Notes goes, I wonder if your school is behind on updating that software? IIRC, I have seem mention of updates for Lotus Notes to handle remote XUL problems in 4.0+ versions, brought about by security fixes in 4.0. 
https://developer.mozilla.org/en/using_remote_xul 
Or you could try this extension. 
https://addons.mozilla.org/en-US/firefox/addon/remote-xul-manager/
Bottom line - install Firefox Portable 3.6.22 to your hard drive to use at websites that can't handle the newer versions of Firefox. 
http://portableapps.com/apps/internet/firefox_portable/localization#legacy36 
And use Firefox 6.0.2 ''(and upcoming versions)'' at the more modern websites which are embracing the web technology being developed for the 2nd decade of this century.

Secure Search Lotus Notes and NTFS?

How can I do secure search with Lotus Notes and NTFS sources? When configuring Identity Management, I have to choose between Lotus and MSAD. And user names are different between both directories. Any chance to secure both sources with one query?

If user names are different on the two systems, you can't combine them in a single SES instance. You only log on once to SES, so the system wouldn't be able to tell which username to use for each system.
However, this can be done via the federation architecture. You need two SES instances, one connected to AD and one connected to the Lotus Notes native identity plugin.
You will then need to have an attribute in your AD which contains the Notes username. Let's call it LNNAME.
You would then create a federated source on the instance connected to AD, which collects results from the instance connected to the Notes plugin.
When you define your federated source, there is a field called "Search User Attribute". This is the name of the AD attribute which contains the Notes username - LNNAME in our example.
SES then authenticates the user against AD. It then runs federated queries against the Notes system, asserting that the logged in user is a valid Notes user with a certain username, which it gets from the LNNAME attribute.
Naturally this requires trust between the systems. The Notes system has to trust the AD to correctly authenticate and identify the user - even though the Notes password will never be given.

I use web mail from lotus notes and need Firefox to connect with my MacBook Pro. Since updating to version four I no longer have the ability to see or open attachements. What I am doing wrong?

I updated my MacBook Pro with version 4 yesterday. I access my company's lotus notes with this browser. I can access the web site, but cannot open attachments. The message I received is that I have removed the attachment. I haven't. The text that states the name of the attachment is there. I can click on it but it won't open and there is nothing in the attachment box in Web Mail.

Try the "light mode". Surprise :)

SCCM 2012 R2 - Distribution Point untrusted domain - Not acknowledging Network Access Account (FYI)

Hello!
Scenario
Built a single primary site server in one domain with multiple distribution points. All site servers are member of this one site.
The distribution points in the primary site servers' domain function as expected. The distribution point deployed to an untrusted domain does not. The primary site server can see all objects in the domain, publishes successfully, and CCM client on the
DP in the untrusted domain knows its part of the site, knows its AD site (according to locationservices.log). The DP role is installed properly, logs are populating, queries are being made for application lists and updates. nfortuantely authentication
errors indicate that this software can'tbe downloaded.
In essence the DP in the untrusted domain can't pull down content from the primary site server. The role uses BITS to download content from IIS on the primary site server, but the requests each throw a 401 error. Unauthorised. This should be an easy fix.
Create a Network Access Account in the primary site server's domain, assign it to the site (Software Distribution setting), wait for the DP to pick up the setting and watch it retrieve its content. The DP in the untrusted domain is configured as a Pull DP,
implying it has to use a Network Access Account to download content. It knows the content is available and makes every effort to download it.
Problem
The DP in the untrusted domain doesn't know a Network Access Account (NAA) has been defined for the site.
The account does exist, created in the primary site server's domain and assigned to the site. Its not a password issue. IIS has not been set for Anonymous access as this isn't needed - the NAA should provide the credentials it requires to pull down content.
A manual check using the URL of the package confirms the package is accessible from the DP when using the NAA's credentials. I've allowed enough time (i think) for the DP to acknowledge the NAA. For fun the DP role was removed, and the CCM agent removed. Both
were reinstalled. A fresh install didn't detect the NAA.
Solution
After some soul searching and a little frustration, it came down to this: A Pull DP always uses the Network Access Account. If the DP can't find a Network Access account it will fail to pull down content. This is undisputed. Found an article that states
the Pull DP always uses the CCM client configuration to do its dirty work. At that point the CCM client was checked. It had the classic problem of only displaying two Actions - Machine Policy Retrieval & Evaluation Cycle, User policy Retrieval & Evaluation
Cycle. Most components were installed but not enabled. This is fairly common. Looked at the console, found the device, added the Approval column. Turns out it wasn't auto-approved. Reason being that the client is in an untrusted domain and clients in untrusted
domains aren't approved automatically (by default).
In this case something as simple as an Approving the client fixed these issues.
The DataTransferService.log highlights the issue:
<![LOG[CDTSJob::JobError: DTS Job ID='{17E0B672-F699-434D-B063-87CC2ACF715C}' BITS Job ID='{38B81ADE-55B5-4BD7-A881-DBFF13943EDE}' ErrorCode=0x80190191]LOG]!><time="18:25:54.264+00" date="02-19-2015" component="DataTransferService"
context="" type="1" thread="3136" file="dtsjob.cpp:3501">
<![LOG[CDTSJob::JobError: DTS Job ID='{17E0B672-F699-434D-B063-87CC2ACF715C}' URL='http://PRIMARYSERVER.A.B.COM:80/SMS_DP_SMSPKG$/5af1680e-4a14-4dc5-8a60-bda7370e6d68'
ProtType=1]LOG]!><time="18:25:54.264+00" date="02-19-2015" component="DataTransferService" context="" type="1" thread="3136" file="dtsjob.cpp:3504">
<![LOG[Authentication required by the proxy, DTS Job ID='{17E0B672-F699-434D-B063-87CC2ACF715C}' BITS Job ID='{38B81ADE-55B5-4BD7-A881-DBFF13943EDE}'.]LOG]!><time="18:25:54.264+00" date="02-19-2015" component="DataTransferService"
context="" type="3" thread="3136" file="dtsjob.cpp:3513">
<![LOG[DTSJob {8814E9A1-3D26-4089-83CF-3C7D17BCEC6E} in state 'Cancelled'.]LOG]!><time="18:25:54.264+00" date="02-19-2015" component="DataTransferService" context="" type="1" thread="3688"
file="dtsjob.h:166">
<![LOG[DTS job {17E0B672-F699-434D-B063-87CC2ACF715C} BITS job
{38B81ADE-55B5-4BD7-A881-DBFF13943EDE} encountered Access Denied error during download. Will retry using Network Access Account.]LOG]!><time="18:25:54.264+00" date="02-19-2015" component="DataTransferService"
context="" type="2" thread="3136" file="dtsjob.cpp:3652">
<![LOG[DTSJob {8814E9A1-3D26-4089-83CF-3C7D17BCEC6E} cancelled by client.]LOG]!><time="18:25:54.280+00" date="02-19-2015" component="DataTransferService" context="" type="1" thread="3688"
file="dtsjob.cpp:3205">
<![LOG[No network access account info found.]LOG]!><time="18:25:54.327+00" date="02-19-2015" component="DataTransferService" context="" type="1"
thread="3136" file="netaccessaccount.cpp:288">
<![LOG[The network access account is not defined.]LOG]!><time="18:25:54.327+00" date="02-19-2015" component="DataTransferService" context=""
type="1" thread="3136" file="netaccessaccount.cpp:858">
<![LOG[DTSJob {17E0B672-F699-434D-B063-87CC2ACF715C} encountered error setting BITS job to use Network Access Account
(0x00000000).]LOG]!><time="18:25:54.327+00" date="02-19-2015" component="DataTransferService" context="" type="3" thread="3136" file="dtsjob.cpp:1885">
The IIS server logs u_ex150219.log captures the request:
2015-02-19 123.11.12.13 GET /SMS_DP_SMSPKG$/5af1680e-4a14-4dc5-8a60-bda7370e6d68/sccm /windows6.1-kb3021917-x64.cab 80 - 9.10.11.12 Microsoft+BITS/7.7 -
401 2 5 1509 2
2015-02-19 123.11.12.13 GET /SMS_DP_SMSPKG$/5af1680e-4a14-4dc5-8a60-bda7370e6d68/sccm /windows6.1-kb3021917-x64.cab 80 - 9.10.11.12 Microsoft+BITS/7.7 -
401 1 3221225581 1509 4
2015-02-19 123.11.12.13 GET /SMS_DP_SMSPKG$/5af1680e-4a14-4dc5-8a60-bda7370e6d68/sccm /windows6.1-kb3021917-x64.cab 80 - 9.10.11.12 Microsoft+BITS/7.7 -
401 1 3221225581 1509 3
2 x Domains: DomainA and DomainX
- Single domain forests
- No trusts between domains/forests
DomainA\PRIMARYSERVER
- Primary Site Server, MP, DP, IIS, all roles
DomainX\DP1
- Distribution Point, IIS, etc
- CCM client installed

Based on the above, you are using a PullDP. If so, have you installed the client agent on this system? The client agent is required on PullDPs in untrusted domains so that they can acquire the NAA.
Jason | http://blog.configmgrftw.com | @jasonsandys

Cisco ACS 4.2.1.15 for Windows and Network Access Profiles

We are attempting to configure ACS 4.2.1.15 on Windows Server 2008 Member Server. Initially I only have the need to authenticate Network Admins for device administration and authenticate Windows AD groups using PEAP authentication. The general problem that I am having is that if I configure a Cisco 1200 Access Point for PEAP and also setup The Access Point for Radius authentication pointed to the ACS server it always maps to the the first Network Access Profile and rather than it trying the second it will error sayiing some condition is not met depending on what changes I make. Can someone tell me what the criteria that is used to determine what NAP is used? According to the manual if all 4 criteria are not met then the Profile will not apply.
I am using one ACS group that is mapped to an AD group for Wireless Access and a Second ACS group mapped to an AD group that includes the Net Admins. This group mapping appers to be working as the user group name seems to mapped correctly in the logs. In short I have tried only configuring the Wireless NAP to only Allow EAP authentication using PEAP EAP-MSCHAPv2 and the Netadmins profile to include all protocols. Bascially what happens is if I have the Wireless NAP first it works fine for PEAP authentication on Wireless but if I try to administer the access point and provide credentials I get a message in the failed log that the authentication profile is not allowed in this Network Access Profile. Why does this not just go onto the next Network Access profile?
I am familiar with version 3.2 but it does not seem to work the same.
Any help would be appreciated on what I am missing.
Thanks

Hi Surenda,
Thanks for your reply. Nop, there is no WLC yet, but the WLC will be installed shortly.
Thanks,
Jean Paul

How to integrate Lotus Notes and upload Help Docs into SAP Portal

Hi Experts,
I got 2 questions with regards to content in portal...
1) I got nearly 30 to 40 help documents (PDF & WORD) which users may refer when accssing CRM & BW system in portal.
Currently they are stored in the Local Drive....i am trying to find a way to upload them portal...so the users can always have the docs the require
and
2) Can any one please update me in detail ...on how to integrate Lotus Notes into portal and configure Single Sign on currently my Portal and Lotus Notes user id's are different
Thanks in advance

Hi Geethika,
1. IF documents are on your local computer, Netweaver Portal has a KMC Addon (Knowledge Management and Collaboration). Within KM it is possible to run a Document Management Scenario. You can Create Folders within KM, give Access Rights to Users, Create an Iview to browse KM Folder then add that Iview to a Page or Role so users can access it.
For this, please chech the online documentation via http://help.sap.com/saphelp_nw04s/helpdata/en/20/b46d42ea0b3654e10000000a155106/content.htm
2. For Lotus Notes Integration, your Lotus Notes Server must be running on Windows Platform.
For the rest configuration please check the following:
Single Sign-On from SAP Enterprise Portal to Lotus Domino
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/94c4e390-0201-0010-09a3-d09e11b80671
I've the latest version of SAP Ticket Verifier, if you couldn't find it, I can send it to you.
regards

Urgent: Lotus Notes and TREX

Hi,
We are planning to use SAPs TREX to search for word documents and ppts embedded within Lotus Notes. However, we have a couple of queries regarding our requirement and would appreciate your help.
1) Is it possible to use the TREX server for indexing documents within Lotus Notes without an Enterprise Portal platform (For Ex., Is it possible to set TREX as the default search engine of Lotus Notes?)?
If the above is not feasible then please read requirement 2:
2) We are currently running Lotus Domino 6.5 and the portal platform is NW 04, SP15. I understand that there was a limitation of not being able to connect the portal with any Lotus Notes repository having version greater than 5.0.8. Does this restriction still exist?
Any help would be greatly appreciated and suitably rewarded.
Thanks & Regards,
Vibhu

Hello Vibhu,
regarding 1) in the notes client, the search button actually contains a dropdown. This dropdown list may also contain HTTP URLs (e.g. in the standard R6 client you find AIL, Altavista and some other search engines linked). You may think of adding the TREX URL also there
regarding 2) please use the KM repository manager by Conet for doing so. To do so, please take a look athe the portal Content portfolio here on SDN or direcly access the business packgage at:
https://www2.iviewstudio.com/sdn/detail_view/index.cfm?action=package_information&CatalogSet=Vendor%20Content&ItemID=17344&CFID=7410541&CFTOKEN=5471887
Regards
Michael

Java, Lotus Notes and WebSphere

Hello,
I'm using the Barcoded Forms component and I'm invoking its methods through the Java API.
I've successfully done so using the Rational Application Developer IDE, but I had to turn off the security on the WebSphere Application Server.
Now I want to run the same application on Lotus Notes, so I created a Java Agent.
When I run the Agent, it gives me the following exception at the line of creating a ServiceClientFactory object.
Kindly keep in mind that the security on WAS is off.
Exception in thread "AgentThread: JavaAgent" java.lang.ExceptionInInitializerError
at java.lang.J9VMInternals.initialize(J9VMInternals.java:216)
at com.adobe.idp.dsc.clientsdk.ServiceClientFactory.<clinit>(ServiceClientFactory.java:60)
at java.lang.J9VMInternals.initializeImpl(Native Method)
at java.lang.J9VMInternals.initialize(J9VMInternals.java:194)
at JavaAgent.NotesMain(JavaAgent.java:29)
at lotus.domino.AgentBase.runNotes(Unknown Source)
at lotus.domino.NotesThread.run(Unknown Source)
Caused by: java.security.AccessControlException: Access denied (java.lang.RuntimePermission shutdownHooks)
at java.security.AccessController.checkPermission(AccessController.java:108)
at java.lang.SecurityManager.checkPermission(SecurityManager.java:548)
at COM.ibm.JEmpower.applet.AppletSecurity.superDotCheckPermission(AppletSecurity.java:1440)
at COM.ibm.JEmpower.applet.AppletSecurity.checkRuntimePermission(AppletSecurity.java:1302)
at COM.ibm.JEmpower.applet.AppletSecurity.checkPermission(AppletSecurity.java:1516)
at COM.ibm.JEmpower.applet.AppletSecurity.checkPermission(AppletSecurity.java:1455)
at java.lang.Runtime.addShutdownHook(Runtime.java:204)
at java.util.logging.LogManager.<init>(LogManager.java:243)
at com.adobe.logging.AdobeLogManager.<init>(AdobeLogManager.java:31)
at com.adobe.logging.AdobeLogger$BootstrapLogManager.<init>(AdobeLogger.java:185)
at com.adobe.logging.AdobeLogger.<clinit>(AdobeLogger.java:180)
at java.lang.J9VMInternals.initializeImpl(Native Method)
at java.lang.J9VMInternals.initialize(J9VMInternals.java:194)
... 6 more
Any help would be appreciated, thank you.

Hi
I am facing the same problem. Were you able to solve this issue. Kindly let me know in that case, it would be really helpfull...

Lotus Notes and Network access slow

Similar Messages

Maybe you are looking for