Lotus Notes connector: Error while crawling LOB contents

Hi all,
I am trying to configure Lotus Notes connector on SP search. We have successfully followed the Randy Rempel's blog on
test environment. No problem to search lotus notes content.
In production environment, we've followed the same procedure but we are facing the following problem. During the full crawl, the below error is thrown
Error while crawling LOB contents. ( Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException The shim execution failed unexpectedly - Exception has been thrown by
the target of an invocation..: System.ServiceModel.FaultException`1[System.ServiceModel.ExceptionDetail] An unexpected error occurred in the Lotus Notes protocol handler while processing the URL
We have forced Lotus Notes Connector to be more verbose, without success.
Any help will be appreciated
David

Reset the index and re-crawl. That usually claers it
If you are using NTLM authentication, then make sure that you specified the PassThrough authentication for crawling
Probably you need to debug the BDC code that underlies the external content types.
can you Check the permission that you have set for the lotus notes domino databases? Was the content access account added to the local administrator group?
If this helped you resolve your issue, please mark it Answered

Similar Messages

Error in crawl log "Error while crawling LOB contents. ( Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException The shim execution failed unexpectedly - The method or operation is not implemented..; SearchID "

Hi
I get the following error in my crawl logs
"Error while crawling LOB contents. ( Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException The shim execution failed unexpectedly - The method or operation is not implemented..; SearchID "
Because of this i suspect, the search results are not including those aspx pages marked as "Hide physical urls from search".
This error is not available in the another environment where the aspx pages are coming in the results.
Thanks
Joe

Hi Joe,
Greetings!
Reset the index and re-crawl. That usually clears it
If you are using NTLM authentication, then make sure that you specified the PassThrough authentication for crawling
Probably you need to debug the BDC code that underlies the external content types.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/41a86c43-151d-47cd-af73-967a4c940611/lotus-notes-connector-error-while-crawling-lob-contents?forum=sharepointsearch
Please remember to click 'Mark as Answer' on the answer if it helps you

Error while crawling LOB contents in SP 2013:'Could not find default endpoint element that references contract in the ServiceModel client configuration section

Hi,
I created custom BDC Model using Visual Studio. In ReadList method i am getting data using Web Service call. Using this External Content Type (BDC Model) i created one external list and it is populating with data.
I created one new content source in search service application using this BDC Model and when crawled this content source i am getting the below error.
Error while crawling LOB contents. ( Error caused by exception: Microsoft.BusinessData.Runtime.RuntimeException MethodInstance with Name 'ReadList' on Entity (External Content Type) with Name 'Entity1' in Namespace 'bcsex.BdcModel1' failed
unexpectedly. The failure occurred in method 'ReadList' defined in class 'bcsex.BdcModel1.EntityService1' with the message 'Could not find default endpoint element that references contract 'ServiceReference1.Service1Soap' in the ServiceModel client configuration
section.
I included the bindings and client end point configuration settings in web.config file located at
\\Inetpub\wwwroot\wss\VirtualDirectories\Port_Number, but still getting the same error.
Please help. Thanks a lot.

The Issue resolved by including the bindings and client end point configuration settings in
machine.config file located at C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Config\ and also restarted the server after config changes.

Error while crawling LOB contents

Hello
I am trying to get the crawl to work on SharePoint but the full crawls never stops and when I stop it the crawl log has below.
topicpages://
Error while crawling LOB contents. ( Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException The shim execution failed unexpectedly - Exception has been thrown by the target of an invocation..: System.Net.WebException The request
failed with HTTP status 404: Not Found. )
I have been searching the net continuously and made sure the folders have the correct permissions etc
The longest I let the search go is 100 hours
Using:
Sharepoint 2013 Foundation
Server 2008 R2
Has anyone seen this before or have any ideas what to try and get this going correctly?
Cheers
James

Also below is what comes up in Event log when I start a full crawl
'Log Name:      Application
Source:        Microsoft-SharePoint Products-SharePoint Server Search
Date:          24/06/2014 10:24:53 a.m.
Event ID:      1400
Task Category: Crawler:Gatherer Service
Level:         Warning
Keywords:
User:          <domain>\SP-Search
Computer:      <server>
Description:
Gatherer\CSS connector failed to connect to CSS net.tcp://<server>/5DA29F/ContentProcessingComponent1/ContentSubmissionServices/content
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-SharePoint Products-SharePoint Server Search" Guid="{C8263AFE-83A5-448C-878C-1E5F5D1C4252}" />
    <EventID>1400</EventID>
    <Version>15</Version>
    <Level>3</Level>
    <Task>3</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2014-06-23T22:24:53.874185700Z" />
    <EventRecordID>67690</EventRecordID>
    <Correlation />
    <Execution ProcessID="1636" ThreadID="3284" />
    <Channel>Application</Channel>
    <Computer>**<server>**</Computer>
    <Security UserID="S-1-5-21-3477241775-3255730575-1957110980-1562" />
</System>
<EventData>
    <Data Name="string0">net.tcp://<server>/5DA29F/ContentProcessingComponent1/ContentSubmissionServices/content</Data>
</EventData>
</Event>'

Error while crawling LOB contents SharePoint 2013

Error while crawling LOB contents SharePoint 2013
I have Configured the BDC Service application using SQL external content. The connection was successful and I am able to see the external content in the List "BDC Demo" . But when I search in the BDC Demo site it gives nothing.
So I checked in the crawl logs and identified that it shows " 1 " under error. to further drill down the issue , I went to click on "1" and see the error message : Error while crawling LOB contents SharePoint 2013 .
I have created an external DB named BCSDemo_DB for which I have granted my search Service account read& write permission.
I have added the same account under administrators for both secure store and BCS service applications.
I have done index reset , done a full crawl but the error still occurs.
Can someone please advise if I am missing something.
Regards

Hi Aravinda,
According to your description, my understanding is that you got an error when you crawled SQL database table in SharePoint 2013.
This error is caused by the fact that the default content access account does not have any rights to access the metadata store in the Business Data Connectivity Service Application.
Or it is caused by the default content access account has no rights on the SQL database.
For fixing it, you need to grant the default content access account permission on metadata store in the Business Data Connectivity Service Application and the SQL database. You can refer to the link below:
http://www.sharepointinspiration.com/Lists/Posts/Post.aspx?ID=5
After that, do a full crawl for the content source.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Sharepoint 2013 vs Exchange 2010 SP3 search (Error while crawling LOB contents)

Hi there:
We are trying to solve the problem: ERROR CRAWLING LOB CONTENTS when we wish to search Exchange 2010 SP3 public folder content on Sharepoint 2013 Foundation.
Quick briefing:
Followed this instructions:
http://technet.microsoft.com/en-us/library/jj591608(v=office.15).aspx
* Created CRAWL RULE
- Used Domain Admin for content access ---> IS THIS WRONG?
- Domain Admin can access public folder thru Outlook Web Access (checked)
- Included all items in this path
PRINTSCREEN 1
* Added a content source for Exchange Server public folders
- Logged to Outlook Web Access with domain admin, expanded Public folders and opened 1st subfolder in new window and copied the address
- Logged to Outlook Web Access with domain admin, expanded Public folders and opened 2nd subfolder in new window and copied the address
PRINTSCREEN2
* Did a FULL CRAWL
PROBLEM:
- Search results does not throw "correct data". Some items are not being found
CRAWL LOG is reporting: Error while crawling LOB contents
Detailed error message:
https://mail.domain.com/OWA/?ae=Folder&id=PSF.LgAAAAAaRHOQqmYRzZvIAKoAL8RaAwAnt2ed15IATLg8XoXLNj4EAAAAXsN8AAAB&t=IPF.Note
Error while crawling LOB contents.
Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException
The shim execution failed unexpectedly - Exception has been thrown by the target of an invocation..:
System.InvalidOperationException An internal server error occurred.
Try again later.; SearchID = 4E8542D3-48EF-404E-8025-8D9AAEFE777A )
We thought it's a throttling issue / found possible solution:
http://powersearching.wordpress.com/2013/07/23/exchange-public-folders-search-fail-error-while-crawling-lob-contents/
Tried it, still same Error messages, problem not resolved.
Any hints? Please advise.
With best regards
bostjanc

Hi Bostjan,
From the error message, the issue might be caused by throttling policy on Exchange side. And the article you posted provides the right solution, some modification to the solution and please try again.
For throttling policy part
1.Execute the command for Set-ThrottlingPolicy
Set-ThrottlingPolicy SharePoint -RCAMaxConcurrency Unlimited -EWSMaxConcurrency Unlimited -EWSMaxSubscriptions Unlimited -CPAMaxConcurrency Unlimited -EwsCutoffBalance Unlimited -EwsMaxBurst Unlimited -EwsRechargeRate Unlimited
2.Execute the command Get-ThrottlingPolicy SharePoint to double confirm the policy setting has been successfully executed
For registry key part
1. Start Registry Editor (regedit).
2. Navigate to the following registry subkey:
\\HKEY_LOCAL_MACHINE \SYSTEM\CurrentControlSet\Services\MSExchangeIS\ParametersSystem
3. Right-click ParametersSystem, point to New, and then click Key.
A new key is created in the console tree.
4. Rename the key MaxObjsPerMapiSession, and then press Enter.
5. Right-click MaxObjsPerMapiSession, point to New, and then click DWORD (32-bit) Value.
The new value is created in the result pane.
6. Rename the key to <Object_type>, where <Object_type> is the name of the registry object type that you're modifying. For example, to modify the number of messages that can be opened, use objtMessage. Press Enter.
7. Right-click the newly created key, and then click Modify.
8. In the Value data box, type the number of objects that you want to limit this entry to, and then click OK. For example, type 350 to increase the value for the object.
9. Restart the Microsoft Exchange Information Store service.
If it still doesn’t help, please check ULS log for related error message.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Error while crawling LOB contents (Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException)

Everytime when I perform a Full Crawl on the Central Administraion page, this error will appear and the crawl process will run into an infinite loop and nothing crawl success. I have tried delete and re-create the crawling content sources, start/stop
the search services but this error still appear.
Please help. Thanks a lot.
Error Message:
topicpages://
Error while crawling LOB contents.
( Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException
The shim execution failed unexpectedly - Exception has been thrown by the target of an invocation..:
System.Net.WebException The request failed with HTTP status 404: Not Found.;
SearchID = EFE3FAA4-12C3-40AD-B410-51D6189FC720 )

Tried scheduled an incremental every 10 minutes
Still getting error on crawling LOB contents. The incremental crawl ran into an infinite loop and nothing crawl success
Thanks for help.
Error Message:
topicpages://(servername)
Error while crawling LOB contents.
( Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException
The shim execution failed unexpectedly - Exception has been thrown by the target of an invocation..:
System.Net.WebException The request failed with HTTP status 404: Not Found.;
SearchID = B801BC11-8138-453F-AB4D-AA4BE4F5B57A )

Error while crawling LOB contents. ( Access denied by Business Data Connectivity. )

Hi,
When I execute Incremental or Full Crawl I get 17000 error and only 1 success.
The error is:
Error while crawling LOB contents. ( Access denied by Business Data Connectivity. )
I went to Central Admin > Security > Specify Web application Policy > Search for the service account for crawl and it's "svc_SPSearch"
I went to Central Admin > Application Management > Manage Service Application > BDC Service > I select all the affected external sources > then Set Object Permission in ribbon > Added "svc_SPSearch" with execute rights > then
kick incremental crawl...
After this I still get 17000 error, 1 success.. Still an error.
I am not sure how the crawler's trust to FAST infrastructure works.
Your response is appreciated. Thanks!
-Fran

I have the same issue.
I have Configured the BDC Service application using SQL external content. The connection was successful and I am able to see the external content in the List "BDC Demo" . But when I search in the BDC Demo site it gives nothing.
So I checked in the crawl logs and identified that it shows " 1 " under error. to further drill down the issue , I went to click on "1" and see the error message : Error while crawling LOB contents SharePoint 2013 .
I have created an external DB named BCSDemo_DB for which I have granted my search Service account read& write permission.
I have added the same account under administrators for both secure store and BCS service applications.
I have done index reset , done a full crawl but the error still occurs.
Can someone please advise if I am missing something.
Regards

Source system not Active error while installing BI content cube

Hi.,
When I try to install the BI content cube, In logs it is showing the error message as "Source client not Active". I activated the source system in modelling tab. Still the problem continues. In source system assignment of BI content the source client is also checked. Please give me a solution.

Hi Selva,
If you want to select only infocube, select "Only necessary objects" in grouping. If you want everything related to Info cube, then system will collect data source also and for that it will check if you are authorized in source system. Please check if the source system is connected to BI or you can do one thing activate the data source in source system and replicate it in BI.
Regards,
Kams

Sharepoint Lotus Notes Connector Not Starting

We are trying to install the Lotus Notes Connector on our SharePoint 2013 Farm. We are currently running a multi-tier farm.
We are running on Windows server 2012, SharePoint 2013 and Lotus Notes 8.0.2. As we provision the Lotus Notes connector with our Crawl account (which has local administration on all of the servers) it seems to create the application pool but then the service
goes from a “starting” to a “stopped” state within a minute.
From the ULS logs I can see this error occur
04/29/2014 10:33:17.00 OWSTIMER.EXE (0x2190) 0x0FBC SharePoint Server Search Connectors:Notes dj8t High Exception caught in Search Notes Provisioning. Notes web service instance NOT PROVISIONEDSystem.ComponentModel.Win32Exception (0x80004005): Access is
denied at System.Diagnostics.Process.GetProcessHandle(Int32 access, Boolean throwIfExited) at System.Diagnostics.Process.Kill() at Microsoft.Office.Server.Search.Administration.NotesWebServiceInstance.Provision() 11d88b9c-f791-90a7-3cae-b4dabbc1b734
04/29/2014 10:33:17.08 OWSTIMER.EXE (0x2190) 0x0FBC SharePoint Foundation Topology 8xqz Medium Updating SPPersistedObject NotesWebServiceInstance. Version: 1291875 Ensure: False, HashCode: 18663991, Id: 24190eed-b9c6-4749-aa44-c7432897c0a3, Stack: at Microsoft.Office.Server.Search.Administration.NotesWebServiceInstance.Provision()
at Microsoft.SharePoint.Administration.SPServiceInstanceJobDefinition.Execute(Guid targetInstanceId) at Microsoft.SharePoint.Administration.SPAdministrationServiceJobDefinition.ExecuteAdminJob(Guid targetInstanceId) at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition
jd, Guid targetInstanceId, Boolean isTimerService, Int32& result) at Microsoft.SharePoint.Administration.SPTimerJobInvoke.Invoke(TimerJobExecuteData& data, Int32& result) 11d88b9c-f791-90a7-3cae-b4dabbc1b734
Any feedback/assistance would be greatly appreciated.

Hi ,
According to your error message, it says that when provisioning NotesWebServiceInstance, access is denied at getting process handle.
For your issue, you can refer to the similar thread:
http://social.technet.microsoft.com/Forums/en-US/cd4bdf09-f17d-4885-9a81-7fedbbb0984d/sharepoint-2010-lotus-notes-connector-not-working-for-ln-v65?forum=sharepointadminprevious
http://www.ericharlan.com/Moss_SharePoint_2007_Blog/sharepoint-2010-lotus-notes-connector-service-a197.html
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support

Lotus Notes Connector: Resource is provisioned but the Create User task...

Hi,
I am getting some problems with the Lotus Notes Connector. The resource is provisioned but the Create User task is rejected. In the Lotus Notes server log, there is no problem and the account was created successfully.
Below is the response OIM has set to the task:
Respuesta: ERROR_UNID_SET
Descripción de Respuesta: User created successfully. Error while updating user unique attribute in the process form.
Notas:
As you can see below, there was no error when the adapter was executed:
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvisionsetPropertyEntered method
INFO [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::loadAttributeMapping: START
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision: :loadAttributeMapping : Attribute Mapping file : C:\oracle\oim9101\xellerate/XLIntegrations/LotusNotes/config/attributemapping_prov.properties
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvisiongetParsedPropertiesEntered method
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvisiongetParsedProperties---- END
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : CreateMailDb true
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : ShortName
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : SecurityType 1
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : MailSystem 0
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : Storeaddbook true
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : SynchInternetPwd true
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : InternetAddress
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : CertifierIDFile C:\Lotus\Domino\Data\cert.id
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : Registrationlog
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : MailOwnerAccess 0
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : MinPwdlen 8
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : Addbook true
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : RegistrationServer win2k3base/oimdev
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : OrgUnit during create -- oimdev
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : OrgUnit oimdev
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : MailQuotaWarning 40
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : Received null values for ExpirationDate:
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::getDefaultDate : Setting Default date
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : IdType 173
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : MailTemplateName
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : MailQuotaLimit 50
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : LastName : Gerente
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : IdFilePath : C:\Lotus\Domino\id
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : MailServer : win2k3base/oimdev
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : FirstName : Teste
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : Comment :
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : MiddleName :
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : Location :
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : MailDBPath : mail\
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : ForwardDomain : oimdev
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvisioncheckUserExistsEntered method
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::getUserName: Org Unit: oimdev
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::getUserName: Final UserName --- CN=Teste Gerente/OU=oimdev/oimdev
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvisioncheckUserExistsExiting method
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::getUserName: Org Unit: oimdev
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::getUserName: Final UserName --- CN=Teste Gerente/OU=oimdev/oimdev
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : User Name: CN=Teste Gerente/OU=oimdev/oimdev
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : Full Name: CN=Teste Gerente/O=oimdev
INFO [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : User Created Successfully
INFO [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::triggerAdminP : Invoking trigger AdminP
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::triggerAdminP : MailServer : win2k3base/oimdev
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::loadAdminpProperties : AdminP properties file : C:\oracle\oim9101\xellerate/XLIntegrations/LotusNotes/config/adminP.properties
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::triggerAdminP : AdminPCommand : tell adminp process all
I've retried the Create User task and got the Lotus Console messages below. There is no error:
10/20/2009 02:02:56 AM Admin Process: Checking for all requests to perform
10/20/2009 02:03:30 AM DIIOP Server: 192.168.200.6 connected
10/20/2009 02:03:36 AM Opened session for win2k3base/oimdev (Release 6.5.6)
10/20/2009 02:03:36 AM Closed session for win2k3base/oimdev Databases accessed: 2 Documents read: 0 Documents written: 0
10/20/2009 02:03:37 AM Certifying Teste Gerente/oimdev
10/20/2009 02:03:48 AM Opened session for win2k3base/oimdev (Release 6.5.6)
tell adminp process all >C:\DOCUME~1\ADMINI~1.WIN\LOCALS~1\Temp\rem22706.con
10/20/2009 02:03:49 AM Admin Process: Checking for all requests to perform
10/20/2009 02:03:49 AM Remote console command issued by win2k3base/oimdev: tell adminp process all
10/20/2009 02:03:49 AM Closed session for win2k3base/oimdev Databases accessed: 0 Documents read: 0 Documents written: 0
10/20/2009 02:03:49 AM DIIOP Server: 192.168.200.6 disconnected
Any suggestion?
Edited by: Renato.Guimaraes on 19/10/2009 21:04

Sunny,
I figured out the problem... Wrong configurations. See what I did:
a) Reviewed the explanation below about the paramater certifierOU of Lotus Notes ITRes, so I set it to empty.
certifierOU Specifies the OU of the certifier to be used when creating user accounts If you use a certifier on the target system, then you must specify the certifier OU value. If
you do not have a certifier on the target system, then leave this parameter field empty.
If there are multiple certifiers on the target system, then you must create one IT resource (of the Lotus Notes IT resource type) for each certifier. Refer to Oracle Identity Manager
Design Console Guide for information about creating IT resources. If you specify a value for the certifierOU parameter, then the user OU value that you specify on the process form is ignored during the creation of a DN for a new user account.
If you do not specify a value for the certifierOU parameter, then the user OU value that you specify on the process form is used in the DN. This feature ensures that only one OU value
is included in the DN.
If you specify a value for the certifierOU IT resource parameter, then user records for which the certifier OU value in the DN does not match the certifierOU parameter value are not
reconciled. This is because the user DN is used to match records in the target system and Oracle Identity Manager, and a difference in the certifier OU value would lead to a
mismatch in DN values. The following example illustrates this type of scenario:
Suppose a user account on Lotus Notes has the following DN:
CN=John Doe/OU=testcertou/O=test/C=US
If testcertou has not been assigned as the value of the certifierOU parameter for any of the IT resources created on this Oracle Identity Manager installation, then the records of this
user cannot be reconciled into Oracle Identity Manager.
Sample value: NY
b) The MailServer paramater was win2k3base/oimdev and I've changed it to CN=win2k3base/O=oimdev.
c) As the certifierOU is clear now, so I have to inform the Orgnation Unit field in the process form.
Thanks.
Edited by: Renato.Guimaraes on 24/10/2009 23:19
Edited by: Renato.Guimaraes on 24/10/2009 23:27

DSO Activation Error - While Installing BI Content

HI Friend,
    First, I deleted one sap source systems for BW1 ( My bw1 server BI is : BW1CLNT100 ), later ,I create the same sap source system, But active 0FIAP_O03 ods,
had error:
DataSource 80FIAP_O03 does not exist in source system BW1CLNT100 of version A
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object 0FIAP_O03
I go to BW1CLNT100 datasoucres ,I not finded 80FIAP_O03 datasoucre, But I goto bw prd BI datasoucre, I found   80FIAP_O03 datasoucre.
I think loss 80FIAP_O03 datasoucre for BW1CLNT100 source system, because I am't delete Roules on the 0FIAP_O03 infosoucre for delete sap soucre systems.
DSO Activation Error - While Installing BI Content
this problem no issue, So I create new thread.
Now, How could me create or load 80FIAP_O03 datasoucre for BW1CLNT100 source system?
Now, I Replicate Datascoure for BW1CLNT100 source system, Delete old datasocure....... I go home, I will try tomorrow .

Hello,
You should generate the export data source for 0FIAP_O03 again, if there is still a problem please goto
RSA1 > SOURCE SYSTEMS > and right click on the relevant source system, find the datamart application component and
right click on this to replicate the datasource.
Best Regards,
Des

Error while updating the content in workflow

Hi,
I'm getting an error while updating the content in workflow thru the checkout option. i.e. contributor checks in the content - reviewer rejects the content - then contributor checks out and modifies the content as per the reviewer's remarks and while checking in the following error occurs
Content Server Request Failed
Unable to check in content item 'HO000128' for workflow. Unable to execute service method 'checkInUpdateRevByID'. (System Error: Runtime error: java.lang.NullPointerException
at intradoc.server.DocServiceHandler.checkInRevByID(DocServiceHandler.java:248)
at intradoc.server.DocServiceHandler.checkInUpdateRevByID(DocServiceHandler.java:240)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:617)
at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:293)
at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:79)
at intradoc.server.Service.doCodeEx(Service.java:490)
at intradoc.server.Service.doCode(Service.java:472)
at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1360)
at intradoc.server.Service.doAction(Service.java:452)
at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1201)
at intradoc.server.Service.doActions(Service.java:447)
at intradoc.server.ServiceRequestImplementor.executeSubServiceCode(ServiceRequestImplementor.java:1071)
at intradoc.server.Service.executeSubServiceCode(Service.java:3497)
at intradoc.server.ServiceRequestImplementor.executeServiceEx(ServiceRequestImplementor.java:942)
at intradoc.server.Service.executeServiceEx(Service.java:3492)
at intradoc.server.Service.executeService(Service.java:3476)
at intradoc.server.DocServiceHandler.determineWorkflowCheckin(DocServiceHandler.java:3833)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:617)
at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:293)
at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:79)
at intradoc.server.Service.doCodeEx(Service.java:490)
at intradoc.server.Service.doCode(Service.java:472)
at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1360)
at intradoc.server.Service.doAction(Service.java:452)
at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1201)
at intradoc.server.Service.doActions(Service.java:447)
at intradoc.server.ServiceRequestImplementor.executeSubServiceCode(ServiceRequestImplementor.java:1071)
at intradoc.server.Service.executeSubServiceCode(Service.java:3497)
at intradoc.server.ServiceRequestImplementor.executeServiceEx(ServiceRequestImplementor.java:942)
at intradoc.server.Service.executeServiceEx(Service.java:3492)
at intradoc.server.Service.executeService(Service.java:3476)
at intradoc.server.Service.doSubService(Service.java:3465)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:617)
at intradoc.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:279)
at intradoc.common.ClassHelperUtils.executeMethod(ClassHelperUtils.java:264)
at intradoc.server.Service.doCodeEx(Service.java:507)
at intradoc.server.Service.doCode(Service.java:472)
at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1360)
at intradoc.server.Service.doAction(Service.java:452)
at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1201)
at intradoc.server.Service.doActions(Service.java:447)
at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1121)
at intradoc.server.Service.executeActions(Service.java:433)
at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:635)
at intradoc.server.Service.doRequest(Service.java:1707)
at intradoc.server.ServiceManager.processCommand(ServiceManager.java:359)
at intradoc.server.IdcServerThread.run(IdcServerThread.java:197))
Please help to resolve.
Thanks in advance
Prasad

I also get error while updating the content in workflow thru the checkout option as reviewer. i.e. contributor checks in the content - then reviewer either updates the metadata or checks out and modifies the content and while checking in the following error occurs
Content Server Request Failed
Unable to update the content item information for 'HO000128'.
The content ID must be specified.
Please help to resolve.
Thanks in advance
Prasad

Class not found error while accessing a Web Service

Hi All,
Im getting a Class not found error while doing method calls of a third party API.
The required jars(axis.jar) are set in the weblogic 8.1 classpath and I tried putting those jars(axis.jar) in my application lib folder also, but dint help. Please help me with a solution.
I'll paste the exception logs here by
java.lang.NoClassDefFoundError: org/apache/axis/AxisFault
at java.lang.ClassLoader.defineClass(Ljava/lang/String;[BIILjava/security/ProtectionDomain;)Ljava/lang/Class;(Unknown Source)
        at java.security.SecureClassLoader.defineClass(Ljava/lang/String;[BIILjava/security/CodeSource;)Ljava/lang/Class;(SecureClassLoader.java:123)
        at java.net.URLClassLoader.defineClass(Ljava/lang/String;Lsun/misc/Resource;)Ljava/lang/Class;(URLClassLoader.java:251)
        at java.net.URLClassLoader.access$100(Ljava/net/URLClassLoader;Ljava/lang/String;Lsun/misc/Resource;)Ljava/lang/Class;(URLClassLoader.java:55)
        at java.net.URLClassLoader$1.run()Ljava/lang/Object;(URLClassLoader.java:194)
        at jrockit.vm.AccessController.do_privileged_exc(Ljava/security/PrivilegedExceptionAction;Ljava/security/AccessControlContext;I)Ljava/lang/Object;(Unknown Source)
        at jrockit.vm.AccessController.doPrivileged(Ljava/security/PrivilegedExceptionAction;Ljava/security/AccessControlContext;)Ljava/lang/Object;(Unknown Source)
Thanks
Noufal

Hi,
Verify the 3rd party class files names are correctly written in your program. Sometimes wrong case might be the reason.
bye for now
sat

Operation not found error while calling AM methods from managed bean

Hi,
operation not found error while calling AM methods from managed bean.
written a method with two parameters in AM.
exposed the method in AM client interface
in the page bindings added the method in method action ..left empty in the value fields of the parameters.
calling the method from managed bean like below
String userNameVal = (String)userName.getValue();
String passwordVal = (String)password.getValue();
OperationBinding operationBinding =
ADFUtils.findOperation("verifyLogin");
operationBinding.getParamsMap().put("userName",userNameVal);
operationBinding.getParamsMap().put("password",passwordVal);
operationBinding.execute();
i am getting operation verifyLogin not found error.Please suggest me something to do.
Thanks
Satya

Hi vlsn,
Can you try with the below code
// in your backing bean
OperationBinding operation = bindings.getOperationBinding("verifyLogin");
//Put your both parameters here
operation.getParamsMap().put("parameter_name1", parameterValue1);
operation.getParamsMap().put("parameter_name2", parameterValue2);
operation.execute();
if (operation.getResult() != null) {
Boolean result = (Boolean) operation.getResult();
and share the result.
regards,
Rajan

Lotus Notes connector: Error while crawling LOB contents

Similar Messages

Maybe you are looking for