LP24--Replenishment for Storage Types with Random Space Management

Hey Everyone,
I'm new to the SAP Community Network so thanks in advance for all your input. I've seen numerous posts that have improved my understanding of SAP already.
My question is about LP24. I would like to know if there is a configuration that will prevent invalid replenishment requirements from being listed with other materials that require materials staging and conversion to transfer order.
Here is my problem. We have thousands of materials, with valid replenishment indicators set that are either out of stock or all stock is in the forward pick storage type already. However, I am required to click through all of the invalid requirements to assure that I pick up my valid requirements (materials with additional stock in an overstock storage type that can be replenished to a forward pick storage type). Is there any way to filter the invalid requirements out?
Thanks again for all your insight.
Marvin

Im facing similar situation.
Did you got any feedback here in the forum?

Similar Messages

WM Replenishment for storage type

Hi there,
I implemented the replenishment solution for a fixed bin and is working well.
But our bussiness needs to use the replenishment for several bins located on one storage type. In other words, we need a replenishmente not for a fixed bin.
I tried to find out the way but all the doucumentation that I got is useing the replenishment solution only for fixed bin.
Somebody could let me know if there is a solution for that or SAP can not manage it in other way?.
Best regards.
Claudio

You can try with Random Bin Management in the repleneishment process.We have implemented this solution.It worked fine with us.
You can find some info in the following link
[http://help.sap.com/erp2005_ehp_04/helpdata/EN/fd/90fbf4b3cd11d3b2ad0050045571f7/content.htm|http://help.sap.com/erp2005_ehp_04/helpdata/EN/fd/90fbf4b3cd11d3b2ad0050045571f7/content.htm]

In WM how to clear partially difference in an open storage type with one mi

Hi
I would like to know how in WM to clear partially differences in an open storage type with one mixed bin not totally counted?
thanks in advance
cadanj

Please do the inventory check for the whole bin.Count the each quant of the material. Difference can be cleared.Use following transactions.
1.LI01N-Create Inventory document.
2.LI11N-Enter inventory count.
3.LI20-Clear WM differences
4.LI21-Clera IM differences.
Let me know if u have any other question.
Regards,
PRashant

Sorting for storage type in LM12

LM12 - change sort display so that alpha storage types with bin info displayed before numeric storage type and bin info.
The standard LM12 shows sort order for storage type as numeric storage types first then alpha storage types.
But User is requesting that alpha storage types are displayed first along with relevant info in alpha order. Standard SAP displays numeric storage type first and then alpha storage types.
Plz can any one help us to give solution for above issue.

Hi VIk,
SAP help of the customizing node (sPRO > LE > WM > Strategies > Activate Storage type Search):
If you want the system to search through the entire warehouse number for stock pick, enter "***" (stands for strignent FIFO) as the storage type. The system then will search the entire warehouse for the oldest stock of the material. The entry "+ + +" means that the system branches to the user exit to the stringest FIFO process (MWMT0013).
Regards,
Csaba
Edited by: Csaba Szommer on Jul 27, 2009 8:54 AM

Data for storage type search is not defined (E FC1 ) in WM module

Hi friends,
I m working in Ware house management.I have created material document and using the matertial document number in LT06.
I am getting the following error while creating transfer order for material document in T-code LT06.
Data for storage type search is not defined (E FC1 )
Message no. L3007
Diagnosis
Information on the storage type search has not been defined.
Procedure
Contact your system administrator. Note down the values that are within parentheses in the error message.
Please advise me how to solve this error.
Thanks in advance.
Regards,
William

SAP does not know where to put the material.
You usually enable SAP by defining storage type indicators, that you maintain at the putaway and picking indicator fields in material master.
then you setup the storage type search based on this indicators.
SAP can then know in which storage type it shall search for a space to store your material.
As a first step check whether you missed to enter this indicator in your matrial master WM view

ID Point for Storage Type V.S. Value in Storage Type Search Table.

I am trying to perform a GR without PO (MVT 501) for material ABC into Plant 1000, Warehouse number 100, Storage Location 0100.
During creation of Transport Order, the Destinated Storage Type appeared
is 011 (ID point for st.ty.010). However, the desired Destinated Storage Type should be 015 (High Rack) instead of 011.
I have checked the following configuration:
1. At the SPRO->LE->WM->Master Data->Define Storage Type, the value set for Field: Assigned ID (Identification point) for storage type under the Stock Placement Control = 011 (ID point for st.ty.010).
2. At the Storage Type Search Strategy, 015 is put as the first Storage Type, followed by Storage Type 001 (high Rack Storage)
3. And I found out that using LX03 (Bin Status Report) that there is no
Storage Bin created for the combination of the following
Plant 1000, WN 100, SLOC 0100, Storage Type 015, Storage Section 001
Since we do not have any Storage Bin created for Storage Type 015, it will display 011 as the destinated storage type during TO creation.
My question
After I have manually created a Storage Bin 03-01-01 for storage type 015, during the TO Creation, system still suggests 011 as Destinated Storage Type instead of the 015 I put in the 1st column of the Storate Type Search.
I already have the Storage Bin created for Storage Type 015, why the system still fails to pick it but suggests 011 from Assigned ID (Identification point) for storage type.

Dear Karthik
You are right, I did activated Indicator: Activate Storage Unit Type Check for Stock Placement in SPRO->LE->WM->Master Data->Define Storage Type
The Indicator: Storage type with storage unit management was also ticked automatically by system when I selected Indicator: Activate Storaget Unit Type Check for Stock Placement.
Are you trying to say the ID Port defined in Storage Type will have higher priority over the Storage Type value I maintained in the Storage Type Search Table?
I have already maintained the Storage Bin and I still do not understand why system still go for ID port. As far as I know, system will suggest the Storage Type from ID Port ONLY if storage bin in this storage type as their destination are not maintained in first in the other setting.
Quoted from SAP HELP
Identification point for storage type
Identification point (storage type) of the current storage type.
All goods movements that do not have a specific storage bin in this storage type as their destination are first directed to the identification point.
Here the goods are identified and a transfer order is generated for the actual transfer of the goods into the storage type concerned.
Please help.
Edited by: Daimos on Nov 4, 2011 3:25 AM

SU Storage Type with Fixed Bin Putaway

Hi,
When I am activating SU for a new Storage type with Putaway strategy F then system gives the error as
" If you have st.pl.str. "Fixed bin", the area check must not be active" Message no. LT071
Does it mean Putaway strategy F is not to be used for SU managed storage Type?
or is there anyway to solve the above error?
Regards,
Vengat

I receive the same error (LT071) if I set T331-PRBER (storage section check active) whilst putaway strategy (T331-STEIN) is "F".
include: L0L12F01
form: T331_CHECK
comment for the error message:
..Strategie F mit Bereichsprüfung ist Blödsinn..
("Stratgey F with storage section check is foolishness")
Are you using T331-PRBER and T331-STEIN paralelly? If yes, why?
If I just activate SUM for a storage type with putaway strategy "F", there's no problem

Control data for storage type is missing Message no. L3006

Dear Mates
i am trying to create a transfer order from delivery. the moment i click on save in LT03 its giving me the error message as
Control data for storage type is missing
Message no. L3006
i have explored every thread regarding the same issue and also implemented some measures like
-> extending the material to particular warehouse and maintaining stock removal and stock placement strategies in it(i created new one from MM01 itself)
-> going to spro path SPRO->Logistics Execution->shipping->picking->Lean WM->Define storage type. and assigned storage type.
but still i am getting the same message in LT03
can you please help me out on this.

Please take a look at the following links and see if they will help at all.
Error on creating a TO - Control data for storage type is missing
"control data for storage type is missing"
Kind Regards,
Jason

"control data for storage type is missing"

Hi Guys
I am trying to create a goods receipt for an inbound delivery.
I created the inbound delivery VL31N - sucessfully
But when trying to create a putaway LT0F - error
control data for storage type is missing. msg no. L3006
Do i maiantain this control data for storage type in the Material master?
is there anything Im doing wrong?
Can someone help please.
Thanks in advance for the help.
Ahmad Yahya

Hi,
Check in SPRO > Logistics Execution > Warehouse Management > Master Data > Define storage type, here for your warehouse and storage type check stock placement and stcok removal control is configured.
Regards,
Prabu

Transfer Order : Data for storage type search is not defined (A   )

Dear Experts ,
While trying to use the Transfer Order and trying to determine the storage type this error appears :
Data for storage type search is not defined (A   )
Message no. L3007
Diagnosis
Information on the storage type search has not been defined.
How ever , I have already configured the search and here is the Storage Type search's data in OMLY
1. Warehouse number : W10
2. Operation : A "Stock Removal"
3. Indicator :   E
4. Stock Category : Blank
5. Special Stock Category : Blank
6. Storage Location Ref :10
7. Storage Type : 10E
Please Advice
Edited by: Sap Sap on Feb 24, 2011 10:54 AM

Hello,
The storage type in which you want to place the material or pick the material from has not been defined in the storage type search sequence.
You need to define the search sequence in customization so that storage type is determined automatically when the transfer order is created;
SPRO>>Logistics Execution>>Warehouse Management>>Strategies>>Activate Storage Type Search
In this go to determine search sequence and then
for warehouse number W10, operation as stock removal 'A' and in this maintained the relevant the storage type (10E) so that it is determined automatically.
I hope this helps.
BR,
Tushar

Storage bin for storage type

Hi ,
How to maintain storage bin for storage type in WM
Regards
RB

Hi
Check it in LS01N.
This will do
Regards,
Raman

Multiple bins in one section in storage type with 'C' open storage strategy

Experts,
I am doing random storage replenishment process for a Low rack location. The replenishment gets triggered from high rack to low rack.
The low rack storage type is defined as next empty bin as putaway strategy and the storage type contains multiple bins in each section.
There is process change and I want to place multiple SUs in one bin , I want to use the putaway strategy as 'C' open storage
and mixed storage allowed with SUT check and SU management active . It is working fine as expected in terms of triggering replenishment
and storing multiple SUs in 1 bin.My concern is that as a rule open storage should contain only one storage bin for section.But in my design , each section contains
multiple storage bins. Does is really hurt in any form? What are consequences? Please suggest.
Thanks in advance

Experts,
I am doing random storage replenishment process for a Low rack location. The replenishment gets triggered from high rack to low rack.
The low rack storage type is defined as next empty bin as putaway strategy and the storage type contains multiple bins in each section.
There is process change and I want to place multiple SUs in one bin , I want to use the putaway strategy as 'C' open storage
and mixed storage allowed with SUT check and SU management active . It is working fine as expected in terms of triggering replenishment
and storing multiple SUs in 1 bin.My concern is that as a rule open storage should contain only one storage bin for section.But in my design , each section contains
multiple storage bins. Does is really hurt in any form? What are consequences? Please suggest.
Thanks in advance
Hello,
You are right. Normally it does not hurt, but what you are doing with the new process change contradicts your original design. Can you explain why you had storage sections in the area in the original design? Did you segregate SKU's by product families/fast movers etc....and now you dont have that requirement anymore or your SKU management has changed?

Change in Transfer Order for Storage Type & bin

Hi,
I want to change destination bin change during TO Creation. Steps are given below.
a) SPRO : Storage type setting: Two options are t there in stock placement section
                 Storage bin cannot be changed during confirmation
1     Storage bin can be changed during confirmation
I set it to 1.
b) LT06 : TO Created.
c) LT12: TO Confirmation: TO lines are coming grayed out. We can not change Destination storage bin, storage type , and section.
Could you please advice me how to change TO Bins change during confirmation.
Clients requirement: System will pick bin automatically. Print will be taken for this. Once placement is done & some of material are not kept as per TO Bin number. its a different bin,. Now User want to change bin number during TO Confirmation.
Thanks ,
Gupta

Hi Gupta,
In WM customizing - master data - storage type - in the detail data of
the relevant destination storage type you set the flag
'Dst bin ch. during confirm.' from space to 1. Then the destination
storage bin "in general" can be changed at confirmation time.
Additionally you need to setup for the movement types that you are using
that you work with the new confirmation list, see detail of the movement
types, box screen control. (Try changing this setting to '1').
Please also read in the R/3 library - logistics - logistics execution -
warehouse management - warehouse movements - transfer orders - transfer
order confirmation - confirming transfer orders.
Here it is described when the destination bin can't be changed even
with the correct customizing settings.
If you set the indicator for Destination bin change during confirmation
for the desired storage type in Customizing for Warehouse Management
under Logistics Execution -> Warehouse Management -> Master Data ->
Define Storage Type, you will be able to change the destination bin when
confirming a transfer order if, for example, the destination bin
proposed by the system is damaged.
NO destination bin can be entered during confirmation for:
- dynamic coordinates
- return items
- Lean WM (if the destination bin is defined in the movement type)
- posting change TOs
- inventory based on putaway
- additions to existing stock in storage units
- transaction Confirm single item
Please check if your TO is related to one of these cases !!!
Regards,
Mauro

HL Physical Inventory: Control data for storage type is missing

Dear experts,
When performing an ad-hoc HL inventory in EWM, I'm facing following issue after I try to save the countet inventory document:
This is how my storage type where the inventory will be performed looks like:
What could be a reason for such a behaviour?
Thank you in advance
BR
Denis

Hi Denis, you need to have the parent object in the counted item list. That means it is necessary to count the HU with parent object as Storage Bin and then you can count HU content with the parent object as HU.
When I deleted the parent object I was able to simulate your error:
Brgds,
Petr

Any user exit for automatic storage type allocation in Warehouse Management

Hi All,
Please help me to solve this issue,
Currently our ware house process is like this
Goods coms form the production for the put away process storage type they are enering manuvally.
Now for the improvement purpose they want storage type should come dynamically, with out entering manuvally.
Could any body help to solve this (Dynamic storage type allocation) issue.
Regards,
Muralikrsihna Nandigama.

Hi All,
Please help me to solve this issue,
Currently our ware house process is like this
Goods coms form the production for the put away process storage type they are enering manuvally.
Now for the improvement purpose they want storage type should come dynamically, with out entering manuvally.
Could any body help to solve this (Dynamic storage type allocation) issue.
Regards,
Muralikrsihna Nandigama.

LP24--Replenishment for Storage Types with Random Space Management

Similar Messages

Maybe you are looking for