LR v2.7 delivering incomplete gallery.
I just finished a new gallery under Apple OS 10.6.3 using LR v2.7 (LR 3 is ordered) and I am getting an incomplete gallery. Out of 79 photos one is missing in the gallery. The gallery content shows both the thumbnail and the large file. There are 9 .html pages with 9 photos on each index page. When clicking on the missing photo in the gallery index page there is a Page Not found error. Does anyone have an idea? Here is the link to the gallery page: http://sahelicopter.com/sample_gallery/index_6.html
Here is the answer. LR was changing one upper case letter in one file and the web server was case sensitive. I had used an old photo file that had upper case letters and so LR changed one letter and therefore the file was not found. Case closed.
Similar Messages
-
Dreamweaver CS5 unable to properly display BridgeCS5 HTML gallery's second page and all others
HI!I would really appreciate your help in solving this.
Here is the link:http://www.roulasorour.com/drawing1.html
As you can see ,only the first page of the gallery displays properly .
But when you press on next you get the following message:
Error 404 - Not found
Your browser can't find the document corresponding to the URL you typed in.
BTW the whole bridge HTML gallery displays just perfectly well in the browser
Any help would be greatly appreciated!
MAc OSX vers. 10.7.2
Safari 5.1.2
many thanks!IT's ok I solved it:)
IT was pointing to teh wrong folder!an older incomplete gallery
tks anyway -
Incompletion log Field VBAP POSEX is not defind in incompltion procedure ZA
Hi Friends,
Need some help on this issue.
We have some orders created in production, and when ever we go to VA02-> enter-> it pops up with the below error message." Field VBAP POSEX is not defined in incompletion procedure ZA ".
I already checked the incompletion procuredue and the field VBAP-POSEX (Purchase order item) was not at all defiend.
It gives the incompletion log for only certain line items in the sales order and not for all. There are already few items delivered and we cannot reject the order to create a new one.
I reveiwed this note "1497255 - Incompletion for PO item number (vbap-posex)" but it states it is for specifically for intercompnay orders.
Our case is standard trade order. It woud be really great anyone has come across the same situation so that i can seek for help..
Thank you so much!!
Best Regards,
RamHi Lakshmipathi,
Firstly, thanks for the response.
Yes.. I did checked... the field VBAP-POSEX was not maintained at item level though.
The same item in other order does not have this problem and it is still open.
This is specific to only very few orders, namely 4 or 5 orders but not with others.
Moreover, these materils are widely used among other company codes or sales org but no issues what so ever.
This one appears to be a peculiar case. Thanks for your time and suggestions for looking it over.
Thank you..
Best Regards,
Ram -
SD Reports for checking open deliveries, incomplete sales orders?
Hi guys,
I am searching for the following reports/ or tables with SQVI in the sap for SD Module:
a) If there are Deliveries exist in the system for which invoicing have not been done. There are two types of cases:
Delivery created but PGI not done
PGI done but invoicing not done
b) Are incomplete Sales documents present? To look at the list of partially delivered sales orders in the system.
c) Sales orders against which there are over deliveries in the system?
d) Any exception reports related to the Credit management SD Module? What reports to look at to see if the companies credit management is working fine.
e) Any standard user exit to check for duplicate customers when creatring?
ThanksOpen Orders - VA05
Open Deliveries - VL06O
PGI done, but Billing Due - VF04
Billing Document not posted to Accounting - VFX3
Regards,
Rajesh Banka
Reward points if helpful -
Expected Price ED1 EDI2 Sales Order & Incompletion issues re: Delivery/Bill
Hi,
We are using ED1 and EDI2 conditions for expected price on the sales order to trigger incompletion. This works fine, and it's possible to use V.25 to release or manually adjust the pricing conditions to match.
However we have problems in the way it is working re: Header/Item - if say we have two lines, line10 EDI1/2 prices are ok, complete; line 20 EDI1/2 conditions also added but incorrect and therefore incomplete.
Now when user trys to create a Delivery - they can create a delivery for line 10 but the line 20 errors because it is incomplete. This at line level would be ok, if we could subsequently Bill this line, but doing this through VF01 errors because of message 'VF055 (VF)055 Pricing error in document'
The only way to clear it is to clear line 10 on the sales order, say V.25 which then allows Line 10 to also be Delivered and Billed.
The above is with incompletion status group 06 which should prevent Delivery & Billing. Alternatively we could use Incompletion status 02, which blocks Delivery but allows Billing.
However this is inconsistant with the EDI1/2 conditions - Delivery seems to be blocked at the Item Level, but Billing at Header Level.
Is there a solution? Ideally we want the either:-
i) Delivery to prevented if any line is incomplete for EDI1/2, or
ii) Billing to be prevented only if the line Billed on the Delivery is incomplete on the Sales Order, not any line.
Any advice appreciated.Hi,
I suggest you check copy control (delivery->billing) at item level in tr. VTFL.
Do you use standard routine in 'copying requirements' ? If needed you can also create custom routine that would not raise error for your scenario.
Regards,
Dominik Modrzejewski -
Is there a limit to number of images in Lightroom4 web gallery?
What is the total number of images that can be in a LR4 Web HTML Gallery? Is there a limit? I am using Mac OS LION.
I thought at sometime there was, I did a two day corporate event with around 1,000 attendees. Client wanted published on their internal web site and over the two days there was well over 1,000 images
With my perceived LR 3.4 limit (and I could be wrong about the limit) and the fact I only had a few hours to deliver I used a freebie software package XnView which worked out just fine in creating a web view. Never got around to testing with LR -
Photo gallery slide show - automatic start
I have created a web photo gallery in Adobe Bridge and successfully
opened it in my Dreamweaver site, but I want to the slide show to start automatically because it is on my
first page and I don't want people to have to click on the play button. Can someone tell me if this can be done and if so, how?
ThanksHi,
I will gladly help you with your problem but please give me a
link to your gallery wither as a private message or by email
([email protected]). The files here pasted are incorrect, look to
the SetSlideShowTimer() or the StartSlideShow() functions above
that are incomplete. Not mentioning that the CSS are really make
the difference.
It will take me more time to try to reconstruct your
structure, not having all the files you reference and probably not
being able to duplicate your problem because the deployment
failure.
Cristian -
Can't get photo gallery slide show to work
Hello,
If anyone could help, I'd appreciate it. This is for a
non-profit I work for. After getting the gallery to work, I can't
get the slide show to work.
from my gallery.html:
<title>Photo Gallery</title>
<link href="../css/screen.css" rel="stylesheet"
type="text/css" />
<script type="text/javascript"
src="includes/xpath.js"></script>
<script type="text/javascript"
src="includes/SpryData.js"></script>
<script type="text/javascript"
src="includes/SpryEffects.js"></script>
<script type="text/javascript">
var dsGallery = new Spry.Data.XMLDataSet ("photos.xml",
"gallery/photos/photo");
var dsData = new
Spry.Data.XMLDataSet("photos.xml","gallery");
</script>
<script src="gallery.js" type="text/javascript">
</script>
<script src="SpryMenuBar.js" type="text/javascript">
</script>
<style type="text/css">
#main (I'm not incl. details for these - to save space)
#thumbContainer
#controls
#header
</style>
</head>
<script type="text/javascript">
</script>
</head>
<body>
<div id="header" spry:region="dsData">
<p>{sitename}<br />
</div>
<div id="thumbContainer" spry:region="dsGallery">
<img src="thumbnails/{@thumbpath}"
spry:repeat="dsGallery" class="thumbs"
spry:setrow="dsGallery"/> </div>
<div id="main" spry:detailregion="dsGallery">
<img src="images/{@path}" class="images"/>
</div>
<div id="controls">
<ul id="transport">
<li><a href="#" onclick="StopSlideShow();
AdvanceToNextImage(true);"
title="Previous">Previous</a></li>
<li class="pausebtn"><a href="#" onclick="if
(gSlideShowOn) StopSlideShow(); else StartSlideShow();"
title="Play/Pause" id="playLabel">Play</a></li>
<li><a href="#" onclick="StopSlideShow();
AdvanceToNextImage();" title="Next">Next</a></li>
</ul>
</div>
<div id="thumbContainer" spry:region="dsPhotos
dsGallery">
<p class="ClearAll"></p>
</div>
</div>
<p class="clear"></p>
</div>
</body>
</html>
Here's the gallery.js file: (didn't include the global vars -
to save space)
dsGallery.addObserver(function(nType, notifier, data) {
if (nType == "onPreLoad")
StopSlideShow();
Spry.Data.Region.addObserver("thumbContainer",
function(nType, notifier, data) {
if (nType == "onPostUpdate")
ShowCurrentImage();
if (gAutoStartSlideShow)
StartSlideShow(true);
function SetMainImage(imgPath, width, height, tnID)
var img = document.getElementById("mainImage");
if (!img)
return;
CancelBehavior("mainImage");
Spry.Utils.SelectionManager.clearSelection("thumbnailSelection");
if (tnID)
Spry.Utils.SelectionManager.select("thumbnailSelection",
document.getElementById(tnID), "selectedThumbnail");
if (gImageLoader)
gImageLoader.onload = function() {};
gImageLoader = null;
gBehaviorsArray["mainImage"] = new Spry.Effect.Opacity(img,
Spry.Effect.getOpacity(img), 0, { duration: 400,
finish: function()
gBehaviorsArray["mainImage"] = new
Spry.Effect.Size(img.parentNode,
Spry.Effect.getDimensions(img.parentNode), { width: width, height:
height, units:"px"}, {duration: 400,
finish: function()
gImageLoader = new Image();
gImageLoader.onload = function()
img.src = gImageLoader.src;
gImageLoader = null;
gBehaviorsArray["mainImage"] = new Spry.Effect.Opacity(img,
0, 1, { duration: 400,
finish: function()
gBehaviorsArray["mainImage"] = null;
if (gSlideShowOn)
SetSlideShowTimer();
gBehaviorsArray["mainImage"].start();
gImageLoader.src = imgPath;
gBehaviorsArray["mainImage"].start();
gBehaviorsArray["mainImage"].start();
function CancelBehavior(id)
if (gBehaviorsArray[id])
gBehaviorsArray[id].cancel();
gBehaviorsArray[id] = null;
function SizeAndPosition(id, toX, toY, toWidth, toHeight,
callback)
CancelBehavior(id);
var effectCluster = new Spry.Effect.Cluster( { finish:
callback } );
var ele = Spry.Effect.getElement(id);
var moveEffect = new Spry.Effect.Move(ele,
Spry.Effect.getPosition(ele), { x: toX, y: toY, units: "px" }, {
duration: 400 });
var sizeEffect = new Spry.Effect.Size(ele,
Spry.Effect.getDimensions(ele), { width: toWidth, height: toHeight,
units: "px" }, { duration: 400 });
effectCluster.addParallelEffect(moveEffect);
effectCluster.addParallelEffect(sizeEffect);
gBehaviorsArray[id] = effectCluster;
gBehaviorsArray[id].start();
function GrowThumbnail(img, width, height)
Spry.Utils.addClassName(img, "inFocus");
img.style.zIndex = 150;
var id = img.getAttribute("id");
var twidth = Math.floor(width * .75);
var theight = Math.floor(height * .75);
var tx = (gThumbWidth - twidth) / 2;
var ty = (gThumbHeight - theight) / 2;
SizeAndPosition(id, tx, ty, twidth, theight,
function(b){gBehaviorsArray[id] = null;});
function ShrinkThumbnail(img)
Spry.Utils.addClassName(img, "inFocus");
img.style.zIndex = 1;
var id = img.getAttribute("id");
SizeAndPosition(id, 0, 0, gThumbWidth, gThumbHeight,
function(b){gBehaviorsArray[id] = null;
Spry.Utils.removeClassName(img, "inFocus");});
function ShowCurrentImage()
var curRow = dsGallery.getCurrentRow();
SetMainImage(dsGallery.getCurrentRow()["@base"] + "images/"
+ curRow["@path"], curRow["@width"], curRow["@height"], "tn" +
curRow["ds_RowID"]);
function AdvanceToNextImage(moveBackwards)
var rows = dsGallery.getData();
var curRow = dsGallery.getCurrentRow();
if (rows.length < 1)
return;
for (var i = 0; i < rows.length; i++)
if (rows
== curRow)
if (moveBackwards)
--i;
else
++i;
break;
curRow = rows;
dsGallery.setCurrentRow(curRow["ds_RowID"]);
ShowCurrentImage();
function SetSlideShowTimer()
function KillSlideShowTimer()
function StartSlideShow(skipTimer)
gSlideShowOn = true;
if (!skipTimer)
SetSlideShowTimer();
var playLabel = document.getElementById("playLabel");
if (playLabel)
playLabel.firstChild.data = "Pause";
function StopSlideShow()
gSlideShowOn = false;
KillSlideShowTimer();
var playLabel = document.getElementById("playLabel");
if (playLabel)
playLabel.firstChild.data = "Play";
function HandleThumbnailClick(id)
StopSlideShow();
dsGallery.setCurrentRow(id);
ShowCurrentImage();
Thank you.Hi,
I will gladly help you with your problem but please give me a
link to your gallery wither as a private message or by email
([email protected]). The files here pasted are incorrect, look to
the SetSlideShowTimer() or the StartSlideShow() functions above
that are incomplete. Not mentioning that the CSS are really make
the difference.
It will take me more time to try to reconstruct your
structure, not having all the files you reference and probably not
being able to duplicate your problem because the deployment
failure.
Cristian -
Message is incomplete. No Sender found
Hi everyone,
I made an Idoc outbound from SAP to JMS xml file delivery but now this error is appearing:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Receiver Identification
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">MESSAGE_INCOMPLETE</SAP:Code>
<SAP:P1>Sender</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Message is incomplete. No Sender found</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I'm receiving my Idoc into a BPM and transform it into an external definition file type and deliver it to the JMS receiver.
Any thoughts of what may be the cause?
ThanksHi,
Could you resolve this problem. I am facing the same problem. We are running SP19 on XI
I have a BPM. These are the steps.
1) BPM Receives the INVOIC idocs and collects them for 1 Minute
2) BPM transforms the idocs into file and RFC msg
3) BPM sends the file
4) BPM sends the RFC msg
in SXMB_MONI, The BPM is completed, but the 2 send steps from the BPM are in Error Status. The error message is as follows:
<SAP:Code area="RCVR_DETERMINATION">MESSAGE_INCOMPLETE</SAP:Code>
<SAP:P1>Sender</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Message is incomplete. No Sender found</SAP:Stack>
Any help to resolve this issue is appreciated.
Thanks
Vidya -
Incomplete Print and error massage
Dear sir
i just purchased one HP Deskjet 2545 all in one printer. I am a novice user.
i have already set up it wirelessly. I just turned the wifi-direct and wifi on my printer. Connected from my pc wifi with the passcode which printed automatically. then followed the steps with usb connected.I have given few single page print and its all ok. But when i have given print of a pdf file having 5 pages, it printed the last page correctly but it delivered an incomplete print of page 4 and it stopped. all the remaining 3 pages have not benn printed. I got a notification like "print error. an error occurred while printing". i tried the same print for thrice, and every time it finished with the same result. i observed, the incomplete print dont have few lines of the last paragraph and also the mergins are out of paper.
Then i have given print separately for 5 times by mentioning different page numbers each time and the it got printed. kindly solve this issue as i have to print at least 50 pages per day.
RegardsHello again.
Please click on the HP Print and Scan Doctor to troubleshoot your printing issues. If this does NOT resolve your issue, please feel free to write back.
Thanks again
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP -
Sender configuration incomplete - perhaps AS2ID missing...
Hello,
We have an PI 7.11 system. Our scenario is outbound IDOC to AS2 (converted to EDIFACT). It is from R/3 --> PI --> Third Party. We installed SeeBurger adapters.
R/3 is in our landscape, its component created without Party.
Receiver is a Third Party. So its component created with Party. In party we have defined Agency and Scheme Name as "Seeburger", "AS2ID", "XXX".
We also have done Receiver Agreement Header Mapping only for Receiver Communication Party and Receiver Communication Component.
When we try to send a message, getting below error at audit log.
Our Sender system is R/3, therefore we cant define a Party for it. What should be resolve this issue?
2012-03-08 15:37:49 Information Message successfully put into the queue.
2012-03-08 15:37:49 Information The message was successfully retrieved from the receive queue.
2012-03-08 15:37:49 Information The message status was set to DLNG.
2012-03-08 15:37:49 Information Delivering to channel: Receiver_Channel_AS2
2012-03-08 15:37:49 Information Message entered AF MP exit bean and will be passed to the JCA adapter now.
2012-03-08 15:37:49 Information SEEBURGER/AS2: Received order from system.
2012-03-08 15:37:49 Information Acknowledgement creation triggered for type: AckNotSupported
2012-03-08 15:37:49 Error Message could not be forwarded to the JCA adapter. Reason: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Failed to get configuration from DATABASE. Sender configuration incomplete - perhaps AS2ID missing.., SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Failed to get configuration from DATABASE. Sender configuration incomplete - perhaps AS2ID missing..
2012-03-08 15:37:49 Error Adapter Framework caught exception: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Failed to get configuration from DATABASE. Sender configuration incomplete - perhaps AS2ID missing.., SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Failed to get configuration from DATABASE. Sender configuration incomplete - perhaps AS2ID missing..
2012-03-08 15:37:49 Error Delivering the message to the application using connection AS2_http://seeburger.com/xi failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Failed to get configuration from DATABASE. Sender configuration incomplete - perhaps AS2ID missing.., SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Failed to get configuration from DATABASE. Sender configuration incomplete - perhaps AS2ID missing...
2012-03-08 15:37:49 Information The message status was set to WAIT.Hello,
Did you solve the problem? What was the solution?
I have the same issue.
I have one AS2 scenario with this error and 20 other scenarios working fine.
full cache refresh is done, but did not solve the problem. -
IPod Replacement Program, incomplete Address?
Hi,
I submitted a incomplete address to apple, therefore I think that might be why UPs could not successfully deliver the empty box to my house,
what do I do, call Apple's support? or is there any other way I can correct my home address?
The empty box arrived at my city and now it is sent back to the sender. (checked via UPs)You will need to Contact Apple about this.
You can use the email they sent you with regards to the replacement...
Or See Here...
Apple Contact USA
http://www.apple.com/contact/
Contacting Apple World Wide for Support and Service
http://support.apple.com/kb/HE57 -
Forieng Trade Data Incomplete?
Hi All,
We are exporting materials from country UAE to OMAN, while saving the invoice I am getteing the below messgae and system not generating the accounting document,
'Document XXXXXX saved (Foreign trade data incomplete)"
I am maintaining config in the below path for the country UAE to avoid the above issue, please correct if I am wrong
IMG - SD - foreign Trade/customs- control Foreign Trade - Foreign Trade data in MM & Sd documents.
Also suggest if I make necessary changes in the above path weather I can generate the accounting document for the Existing Invoice already saved
Regards,
C S javaliHi Javali,
Please also check the following information.
Upto sales order:
1. Did you maintained foreign trade data tabs in material with Comm./imp. code no.
Export/import group, PRODCOM no, Country of origin,Region of origin,data for legal control?
2. Did you maintained foreign trade data in the material master?
3. Have you done proper route determination?That should appear in the sales order.
If you have not maintained the data pls maintain in those tabs and that should be properly configured.
In delivery document:
Header: pls verify whether these details are populating or not. If all the data is filled properly then traffic light comes as green in foreign trade/ customs tab
1. Handling: Mode Of Trnsprt-Border
Domest Mode Of Transp.
2. Geograpy: Office of exit
Export customs off.
OfficeOfDestination
3. Organisation: Number of foreign trade data
Delivering country
FT basis doc. cat.
Reference document number
Item Level:
1. Comm./imp. code no in legal categorisation
2. origin/destination/business tab: Ctry of origin, Region of origin, Dispatch ctry, Export procedure, BusTransactType,
3. organization: Number of foreign trade data, Item,Delivering country, FT basis doc.cat.along with green traffic signal.
Thanks&Regards,
satheesh -
Hi Experts,
Please help. Basically PP consultant.
While doing delivery in VL01N I am facing following error.
Order cannot be delivered
Diagnosis
Possible reasons include:
The copy conditions specified in Specify copy control for deliveries do not allow the order to be delivered.
The order is blocked for delivery.
The order document is incomplete.
Procedure
Pay attention to any notes that may be recorded in the log.
You can display the copying requirements defined for this transaction in Customizing.
How to solve this.
Edited by: Raja S on Jan 13, 2009 7:13 AMHi Raja
Your assignment and all settings seems to be correct
There are a few checks
1.In CMR also pls check whether you have maintained delivering plant as 2222 in the shipping tab
2.In MMR have you maintained delivering plant as 2222 in sales org data 1 tab
3.In OVL2 have you assigned shipping pt as 2222 for the delivering plant 2222. shipping conditions 01 and loading group 0001
Are you seeing those entries?
Mainly in OVL2 are you seeing your entry
If all these are correct pls log off from SAP and relog after 1 minute and once again create the sales order
Make sure that you are putting the right customer and right material(by oversight there can be a mistake)
After inputting the material choose the line item and go to item details and check whether you are getting delivering plant as 2222 and shipping point as 2222 in the shipping tab automatically
It has to come automatically
If doesnt come automatically pls enter these manually and see any error comes and post that error msg
It has to come automatically ,not coming still throwing error means there is some program error only
_After seeing your error in the sales order
In t code OVL3 for your delivering plant, shipping pt,and storage conditions from MMR maintain the storage location as 0002 and then try
Regards
Raja
Edited by: ramanathan raja on Jan 13, 2009 5:37 PM -
Foreign trade data incomplete error
Friends,
While creating billing document I am getting error as "Foreign trade data incomplete"
Solution is to specify fields- mode of transport in delivery header. However I want to make default that means it should come automatically to deliver header. How it can be achieved. Ple help on above issue. I am working in ECC6.0 version Kindly give step by step menupath for all settings.
Thanks
Shivin this case foreign trade data should not be applicable/required
foreign trade data is always used if a good is sent from one country to another country, it is always cross border
i.e. Foreign trade data is used in Europe for preparing the Intrastat returns which is always cross border from one EU country to another EU country
i hope it helps and makes sense for you
http://help.sap.com/erp2005_ehp_02/helpdata/en/4c/420a3c470a11d1894a0000e8323352/frameset.htm
kr
hakan
Maybe you are looking for
-
Difference between MB51 and MB5B
Dear, When I run report MB51(Material document for material) for a material/plant and posting date system shows me 6 document posted however when I run report MB5B (Stock on posting date) for same material/plant and selection date for a year it show
-
I have attached with my message the report I try to print. It is a Labview 6 vi. I had no problem with Labview 5. But with Labview 6, the plots are shopped (all the rest of the report is correct). What is printed is not what I see. The graph is inten
-
Hi my old IMAC "blew up" and is too expensive to repair so I biught a ew one last week. I want to know if I can transfer the additional RAM to my new iMac.
-
Problem clonning dynamic pool, help needed
Hi, again I am having problems ... I manage to successfully import a winxp vm and convert it to template, I then went to the pool tab,created a new pool, added the template and configured the cloning to automatic, min 1, max 3 machines (I am still in
-
iPad was working fine yesterday - day 3 being in London - but is not picking up carrier today - what can be done?