LR5 Export Plug-Ins

Can I set PS Elements 11 as an export plug-in in LR5?  Have tried using the LR5 Plug-In Manager which shows an error each time I try

Most people set up PSE as their external editor for editing directly from the LR Library:
Edit >> Preferences >> External Editing
Click choose and navigate to the PSE11 Editor application to set it up, then click OK.
You normally make the round trip from Lightroom as follows:
1) Ctrl+E in the Library to export selected image with develop settings (I choose PSD)
2) Edit in Elements; then Ctrl+S to replace (overwrite) Lightroom export copy
3) Ctrl+W to close in Elements and update Lightroom thumbnail.
Otherwise at the bottom of the export dialog you can use post processing to open in another application after the export is complete.

Similar Messages

  • Aperture 3 problem with export plug-ins in 32-bit mode

    I have a number of export plug-ins for Aperture, the ones I use most often being flickr export and BorderFX. I restarted my laptop in safe mode to get access to the 32-bit checkbox in the Aperture info screen, and now my Aperture defaults to 32-bit when it opens. That's all well and good. However, my plug-ins still do not work. If I select BorderFX, the usual box does not pop up. The export plug-ins are then grayed out, and when I go to quit Aperture, I get the following dialog box:
    "Aperture is currently exporting files. If you quit, the export task will be canceled."
    If I select flickr export, the screen pops up, but then hangs on flickr authentication.
    Any ideas?

    Bumping in a desperate attempt for some answers.

  • No exporting plug-ins were found

    My hard drive recently crashed and Apple reinstalled OSX 10.6. I brought everything back with Time machine. Now iPhoto 8.1 says there are no exporting plug-ins to export photos. I reinstalled iLife and I still have the problem. What do I do?

    first download and install the 9.0.3 iLife support update - http://www.apple.com/downloads/macosx/apple/application_updates/ilifesupport903. html
    If that does not fix it delete the iPhoto application and the iPhoto receipts ("your hard drive" ==> library ==> receipts ==>) and reinstall iPhoto form the original disks (the restore disks that came with your computer as a custom install of bundled software only or the iLife disks if you purchased an iLife upgrade)
    LN

  • No exporting plug-ins can be found  -  huh?

    I have NEVER seen this before.
    I have obviously lost the plug-ins needed to export my pictures.
    Can someone please help me get them back?
    Thanks,
    Dwaine

    Wow. You certain described the problem correctly in your first post. I've never heard of such a thing.
    You might wish to try repairing permissions or using DiskWarrior (if you have it).
    My next suggestion is to completely reload the iPhoto app from your iLife CD/DVD. To do that, you need to first remove everything that's on your HD. Most of it is easy (drag the app folder to the trash) but you'll need to do a search for the ".pkg" file. I'm not at my Mac right now but the correct name is probably iPhoto.pkg or something darned similar. That file tells the OS that the app is loaded and, if you forget to remove it, the OS won't let you reload.

  • Plug-ins in aperture

    it's possible to remove some pluins from aperture ?
    it' s possible that some plug ins prevent to export some version?

    See this document:  Aperture 3.4 and later: Some third-party plug-ins are no longer compatible
    Check with the manufacturer's of your plug-ins, if the plug-ins are compatible with Aperture 3.4.
    To uninstall, remove them from the folder
    /Library/Application Support/Aperture/Plug-Ins/
    They are either in the subfolder "Edit" or "Export", or both.
    They should not interfere with Exporting, unless they are used as export plug-ins or the installer changed more in the system than putting the plug-in into the folder.

  • Plug ins, where do they go

    for quite some time my downloaded plug ins showed up in LR 4, then one time, they were not there, they reappeard. Now they seem to be gone and not coming back.
    any thoughts appreciated  joanlvh

    See this webpage where plug-ins have to be installed: http://help.adobe.com/en_US/lightroom/using/WSB8C2DF2B-2ED0-4b97-BA18-5DBEDC69E7D9.html
    The webpage talks about Export plug-ins but the location is the same for all plug-ins.

  • I installed Nik:s suite of plug-ins for LR5 but for some reason not all of them were installed. In the end I uninstalled all of the Nik programs from my Mac but before I reinstalled them I opened LR5 again to check. Under "photo" and "edit in" the plug-in

    I installed Nik:s suite of plug-ins for LR5 but for some reason not all of them were installed. In the end I uninstalled all of the Nik programs from my Mac but before I reinstalled them I opened LR5 again to check. Under "photo" and "edit in" the plug-ins were still presented but no programs opened, of course. after reinstalling the plug-ins one of the programs appeared twice in the list but not the others. I´m going to reinstall them again and I´m wondering if there is anyway of erasing the links to the plug-ins under "photo" and "edit in" ???

    Wow that was really quick, thank you so much.  Im not sure at all which version it was because i said it was around 4 years ago he bought it.  I know it isn't under his username, since he's a PC person (ugh) so i know its probably registered to one of our actual names.  isn't there some way to look it up since we did register it, because I'm not even sure where the disks are from when we bought it (we've moved a lot and also have two storage lockers, i know i would have kept it with other disks) but my cd rom drive is actually broken on my computer as well ( i think it got stepped on and is now squished and won't eject or run disks.)
    So is there anyway they can look up that its registered to one of our names since we did register it when we bought and installed it, or do i really have to find the disk with some sort of proof of purchase (i know there would be no receipt after all this time)
    either way, ill do what you suggested to the best of my abilities and thank you so much for answering my questions, i can't even open the program as its incompatible and find out the info from that) so I'm in a bit of a pickle and your response was so thorough and it didn't seem to be posted long enough to even write a well researched response, thanks, all the best,
    sarucia

  • "An error occurred while attempting to load this plug-in."  I donloaded the Nik Collection, but when I try "export with preset" the only preset as an option is HDR Efex Pro 2.  The other plug ins appear in my applications folder, but I get the error messa

    I downloaded the Nik Collection, but when I try "export with preset" the only preset as an option is HDR Efex Pro 2.  The other plug ins appear in my applications folder, but I get the error message at the start of this post...I can us, say, Silver Efex stand alone, but I want to use as a plug in...can anyone help please..?

    Hi,
    Follow these instructions: Accessing the plug-ins from host applications - Nik Collection Help

  • PowerCore Plug-ins aren't represented in Exports?

    Maaaaaaannnnnnnnn! I was just beginning to forgive Audition CS5 for the feature-botomy it pulled on us. Is anyone else getting this problem? I use TC Electronics PowerCore plug-ins, which, similar to UAD plug-ins, are processed through an additional PCI-e card. I can enable the plug-ins in CS5.5, and even hear them while I am mixing. But when I try to export my mix, they aren't there. It sounds the same as if I had disabled all of my PowerCore plug-ins right before I exported. And it doesn't matter which of them I am using. It doesn't include any of them in the export. I have tried multiple workarounds... mixing down effects busses first, mixing down the master bus, doing an overall session export, pre-rendering tracks, etc. Doesn't work. It's all the same. A beautifully reverbed and compressed mix exports completely dry and punchless. And there doesn't seem to be anything I can do about it. Can anyone else verify that this is happening, and does it affect other third-party plug-in PCI cards? Any ideas for a fix? 

    I have a work-around. Pre-render does nothing to solve the final issue because I think Audition re-renders all effects in export (as it should for best sound quality). My work-around is not ideal, but it does allow me to at least use CS5.5 with my current setup (albeit very inconveniently):
    1) For least annoyance, go to preferences and uncheck the box in "Effects" that stipulates that Audition should process disabled effects. This way you can have all your effects preset, and disable all of them but one or two without processing the disabled effects.
    2) Make sure you have no more than two cells of your DSP processing accessed. Then bounce down the indivual busses or tracks that have the third-party plugins in them. Do this individually, monitoring your plug-in application to make sure that it is not being asked to process more than it has capacity for. Then listen to your bounce downs to make sure they are exactly the same as the original busses or tracks (sometimes this requires "exclusive soloing" to be checked in your preferences... especially if you have pre-fader sends to effects busses). Mute the old busses and tracks and disable their effects, but don't delete them in case you need to make changes later. Then enable the next one or two effects, and keep doing this process until all the third-party plugins are represented as .wav files in the mix.
    3) Do this only at the mixdown stage... the mixing process should be unaffected for the most part. This also allows you (conceivably) to use more than just four cells of processing on a given track.
    4) On the other hand, you could have twice as many DSP chips as you needed for mixing. For instance, I could buy another PCI-e card to be used for the Export process, and then pretend I only have one card while I am mixing (yeah, right!).
    Adobe could do the following to fix this problem:
    1) Allow for single-thread processing mode in mixdown.
    2) Allow for use of "Rendered" tracks during mixdown. This would be a native version of my workaround. Rather than going to the source for every export, the user could have the option of exporting the final with a combination of rendered tracks and unrendered tracks.
    Message was edited by: Cubed Root Sound

  • How to save down from InDesign Creative Cloud version to CS5? Have exported as .idml file but still get messages that plug-ins are missing although CS5 confirms it is fully updated.

    How to save down from InDesign Creative Cloud version to CS5? Have exported as .idml file but still get messages that plug-ins are missing although CS5 confirms it is fully updated.

    Yes. Thanks. I misled myself based on another post. Successfully did this by selecting "File," "Save a copy ..." then choosing "for CS4 or later (IDML)"
    It required some patience and several tries, but I think that was due to hardware (memory) being overloaded by CC Cloud version or something. It was a 50 MB, 500-page file and took 17 minutes to convert/save,
    Re-capping: from CCloud to CS5, don't use "Export" (to IDML); use "Save as" or "Save a copy" and select "for CS4 or later (IDML)".
    Advice much appreciated.

  • I get hangs using plug-ins (NIK), and can't export (hangs/crashes). Anyone experiencing this?

    Updated Aperture today (3.4.3) running 10.8.2. Now I get hangs using plug-ins (NIK), and can't export (hangs/crashes). Anyone experiencing this?

    Andrew,
    In general, I've found the Nik plug-ins to be the least problematic of all that I use. Unfortunately you haven't provided enough information so that help can be focused on your problem. So here are some of the standard steps to take.
    1. Make sure you are running Nik's latest versions. There were earlier ones that didn't work properly with ML.
    2. Which plug-ings are the problem?
    3. Have you tried the repair/rebuild option on your Aperture database? Often what appears to be problems with      a 3rd party item actually stem from some sort of fault in the database.
    4. If you're really stuck do the following steps: A. Delete the Nik plug-ings. B. Repair/rebuild the database. C.      Download Nik's latest versions. D. Reinstall. E. Test.
    This is a generic problem solving approach that fixes many things. Also, you should examine if it is a particularly type of file or set of photos or something specific in the images you are working on. A corrupt image, for example, can produce really weird things on occasion.
    Hopefully some of this is useful. If not, more detail is needed.
    Robert

  • Mass Export of Regions with Plug-ins

    Hey guys,
    I've been working on a project, and now what I need to do is export 100 or so regions on 1 track with the plug-ins.
    Since I've got about 15 tracks of roughly 100 or so regions, it gonna tack awhile to export them one by one.
    Does anybody know a way where I can export all the regions on a track into audio files, with the plug-ins enabled aswell?; I also need the names of the regions to stay the same aswell.
    If anybody can help me that would be great.
    Thanks

    Hmm, I'd probably, in a test project, move the regions to new tracks (one track per region) and then do the bounce in place function, which will get you the bounced audio files batch bounced.
    Then I'd probably trick Logic's file handling to load in the new audio files in place of the existing ones, by manually locating the missing files in the new location.
    It's a bit tedious though - out of interest, why do you need to do this, in place of a simple freeze or track bounce? Is this for exporting to someone else?

  • The "edit in" does not launch if I make any develop changes.  I am using LR 5.6 and all of my plug ins are properly installed, up to date and were working just fine.  Edit in does work if I reset the image or load an unmodified DNG.

    I am using LR5.6 on a Windows 7 machine with plenty of memory.  LR, CS5 and all of my plug ins have been working just fine.  Tonight I've found that if I make any kind of significant adjustments to an image, and the go to "Edit in.." that function does not launch.  I can use the Edit in command on an unmodified image, or if I reset the modified image.  I have the issue with all of my plug ins, including Photoshop, all of the Nik software, RadLab, and OnOne.  I believe that all of the plug ins are current.  I've been working with them yesterday and I had no issue.  I cannot recall anything that has changed since then, and I have not installed any software.  I'm at a loss!!  Please help!

    I have traced the problem to a corrupted profile.  When I captured the images in question, I also used Color Cherckr to create a profile for processing.  When I apply that profile to the adjustments I make, I can no longer "Edit In".  If I use another profile, even one that I created using Color Checkr at a different point in time, I don't have the issue.  Something seems to have corrupted the new profile.  I will re-create the profile and see if the issue is resolved.

  • Multiple plug-ins in one file (CodeCarbonPowerPC)?

    I'm trying to put 3 plug-ins in one file.
    Very simple on Windows (3 PiPL resource blocks with different entrypoints).
    And don't worked on PowerPC:
    CodeCarbonPowerPC(0,0,"") <-- what is last parameter (string)?
    Any example?
    Thanks,
    Ivan Kharin

    Apologies for the confusion, that's a "custom" PiPL.r created some time ago before I saw the PS7 SDK, Adobe called it something different. You'll have to refer to the official SDK for the precise name but in other respects it's identical of course. I've never used the third parameter, but my v6 documentation describes it as follows:
    Pstring fEntryName
    Pascal string used to lookup the address of the function
    to call within the fragment. In order for the Code
    Fragment Manager to find an entrypoint by name,
    that name must be an exported symbol of the code
    fragment. If NULL, the default entrypoint will be used.
    fEntryName allows a single code fragment to contain
    more than one plug-in.
    One day I mean to regularise my sources to match their official published selectors for Carbon CFM and Mach-O... The disparity is an artefact of the SDK's Iron Curtain period.

  • Loading Interruptions after Using Plug-Ins

    Hello!   I'm using LR3 (still) with plug-ins for PS and Nik Dfine.  Whenever I use either plug-in and return to LR,  a "loading" update occurs about every 15 seconds for about a second.  This is especially annoying during Brush operations.  It not only interrupts what you're doing, but if caught in the middle of a Brush stroke, that stroke is gone when "loading" ends; and if you were in Erase, the brush gets reset to Brush A/B.
    My system configuration:
    i5 2500K (not overclocked), 2.3 Ghz
    8 MB RAM
    Windows 7 64-bit LR3, CS4, Dfine also 64-bit
    All programs on SATA drive C (Samsung Spinpoint)
    Photo files on SATA drive F (Samsung Spinpoint)
    LR cache and catalog on 64 GB SSD drive G
    Cache 32 GB
    Drive space 75% free
    This seems to be the one issue my upgrade to a home-built hasn't solved.  Having just emptied my cache, I just performed a Dfine noise-reduction on a fresh raw file (Canon 7D), then opened up Brush in LR.  That alone was enough to see the issue. 
    Is there anything that can be done to improve performance with plug-ins?
    Thanks kindly, Chris

    Chris,
    This is a bug in LR3 and 4.
    It got squashed in LR5. Upgrade to 5, I just tested it to make sure.
    Thank you to the Lghtroom team.
    Rich

Maybe you are looking for