LSI 1394 OHCI Compliant Host Controller driver for Windows 8.1

I have an HP Z600 with a LSI 1394 OHCI Compliant Host Controller and get an error. It is a "This device cannot start. (Code 10) STATUS_DEVICE_POWER_FAILURE error
When Windows 7 is installed, there is no error but with Windows 8.1 running there is this error.
There are no installed legacy drivers that I can use and I have tried many different permutations of driver installs.
Any thoughts?
Thank you in advance.
Sal

Hi:
You may also want to post your question on the HP Business Support Forum -- z Workstations section.
http://h30499.www3.hp.com/t5/Workstations-z-series​-xw-series/bd-p/bsc-272#.VIMqRDh0zGg
If you tried manually installing the W7/W8 driver (I have no clue which one of the several LSI drivers listed that you need), then that would have been the only suggestion I could have offered.

Similar Messages

  • LSI 1394 OHCI Compliant Host Controller

    I have a new HP and since I installed Windows 7 my firewire will not work and the diagnostic test says the following:
    PCI LocationPCI bus 1, device 5, function 0
    1394 Bus Reset Test
    Test Started 8/6/2009 1:25:06 PM
    Warning MessageBus 0, Internal return code 0, Error code 08/6/2009 1:25:06 PM
    Test FinishedInternal Error8/6/2009 1:25:07 PM
    It worked fine in Vista Home Premium
    Here are some other specs
    -Intel(R) Core(TM)2 Quad CPU Q6700 @ 2.66GHz
    -8 GB DDR2-SDRAM (PC2-6400 / 800 MHz)
    System Board
    ChipsetIntel G31/G33/P31/P35
    SouthbridgeIntel 82801IR (ICH9R)
    ManufacturerPEGATRON CORPORATION
    ProductBenicia
    HP Model No m9340f
    Everything else passes.  Device Manager is showing the Controller installed and working properly. I checked the driver and it appears to be the most current. However I have not checked the drivers for the Mother Board and Chipset as I don't want to create more severe problems by messing with those drivers.  Like I said, all other hardware is functioning without problem.  Anyone have any ideas?
    Thank you

    Try changing your firewire driver. There's 3 drivers bundled in windows 7, change the driver to the one that has (Legacy) at the end of the name.
    Hi,
    I already tried it and some other drivers to. Windows 7 Ultimate x64 manages to recognize my external drive, but after copying some bigger files the data transfer speed dops to zero and I can't abort the copying process. So it's more or less stuck until I unplug my drive.
    My FireWire interface consits of this PCI express card:
    http://www.logilink.org/showproduct/PC0036A.htm
    This is my external drive:
    http://www.lacie.com/de/products/product.htm?pid=11064
    I know that the FireWire of the drive works, because I also tested it on my old computer who has built in FireWire. When I tested the card with Vista x86 I had the same issues.
    What's wrong and how can I fix it?

  • 1394 OHCI compliant Host controller

    ok i have ordered 2 of these boards now. the first i just figured was the board  because no matter what i did i got the BSOD and had to heep restoreing for it to work.so i was sent another from best buy who i purchased this from. but now still the 1394 OHCI compliant Host controller will not install . i have tried updateing the software and whatever i can do but it just won't update.
     i also get this code in properties
    This device cannot start. (Code 10)
    msi x58 pro-e
    6 gb coisiar 1600 runiing at 1033 for now
    xfx xxx radeon 5870 video card
    windows 7 ultimate 64-bit
    hopefully this is enough info
     thank you .

    I would start to wonder if the reseller sent you back the same board. Two having the exact same issue are remote unless it was related to a bad batch of controllers. One would would think the forum would have had a bunch of threads about it. I take it the firewire device cable has been carefully inspected & the device has been tested in another machine?
    Quote
    this never worked, i have had this board now for over a year and have yet to have it installed.
    A year has passed? It doesn't appear like any magical cure is going to present itself, so RMA looks to be in order.

  • Satellite A210-16G Mass Storage Controller driver for Windows Vista 32-bit

    Hello, I need Toshiba Satellite A210-16G Mass Storage Controller driver for Windows Vista 32-bit. If you have setup file, please redirect me, if you have any other file, please explain me where to install it.

    If I were you I would take look to the Drivers Download site of the Toshiba mainpage, because there you can find everything you need.
    The mass storage controller can either be the HDD controller or the SD-card controller. I would download both of them.
    Heres a direct link to the Drivers page: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
    Greets

  • USB Serial Controller Driver for windows 7 64bit

    USB Serial Controller Driver for hp 15-g049au windows 7 64bit
    This question was solved.
    View Solution.

    Hi,
    Install the Chipset drivers on the following link and reboot.
    http://support.amd.com/en-us/download/chipset?os=Windows%208.1%20-%2032
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Multimedia audio controller driver for windows 7 on compaq presario r3000

    I installed Windows 7 on Laptop Compaq Presario R3000. Everything is fine, however, multi media controller driver was not installed. I would appreciate if you let me know where I can get it. I have Driver CD for Windows XP that came with my computer. Thanks.
    This question was solved.
    View Solution.

    You're very welcome.
    Looks to me like you have to manually install the XP audio driver as follows...
    Download and run this file.  If it installs the audio, great.  If not...close out of any error windows.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-18403-1&cc=us&dlc=en&lc=en&...
    Go to the device manager and click on the multimedia audio controller needing drivers.
    Click on the driver tab.  Click on Update Driver.  Select the Browse my computer for driver software and browse to:
    C:\SWSetup\sp27325\SMAXWDM\W2K_XP\smwdmNV8, and select the SoundMAX Integrated Digital Audio device from the list and see if the driver installs that way.
    Then reboot.

  • Cannot install NEC USB 3.0 Driver for Windows 7 - Now no USB 3.0

    I was trying to update the usb 3.0 driver on my G770 - connecting a USB 3.0 portable drive (or USB 3.0 flash) would slow down Windows and browsing from folder to folder would hang.
    I downloaded the latest driver from the site...
    NEC USB 3.0 Driver for Windows 7 (32-bit, 64-bit) - Lenovo G770 Notebook (IN5CAR01WW5.exe)
    and it asks for Renesas Electronics USB 3.0 Host Controller Driver disk during the installation.
    Renesas Electronics USB 3.0 Host Controller Driver for Windows XP exists but the driver for Windows 7 is NEC USB 3.0 Driver for Windows 7 (32-bit, 64-bit)
    What to do?
    error:

    Use the windows XP driver. They normally work fine.

  • Need SM Bus Controller Driver for A75-S231

    Unfortunately I am without my system and backup disks and I am in desperate need of a driver for the SM Bus Controller. Problem surfaced after re-install of XP Home.
    I called Toshiba tech support to identify the motherboard chipset shipped with my unit (specs listed at end of post) so as to locate and download the driver. Unbelievably, Tech is not equipped to identify the make or model of my motherboard or identify the chipset. Third Party software tells me I have a Toshiba EDW10 Motherboard and tech searched the internet and told me I have some VIA motherboard and good luck finding your driver.
    Please help, I didnt think that Toshiba of all people would be unable to identify their own systems but here I am 4 hours later bothering you good people and still hunting. Does anyone have the SM Bus controller driver for the A75-S231 or tell me what chipset was shipped with my unknown motherboard?
    My system specs are as follows:
    OS Name Microsoft Windows XP Home Edition
    Version 5.1.2600 Service Pack 2 Build 2600
    System Manufacturer TOSHIBA
    System Model Satellite A75
    System Type X86-based PC
    Processor x86 Family 15 Model 4 Stepping 1 GenuineIntel ~3333 Mhz
    Processor x86 Family 15 Model 4 Stepping 1 GenuineIntel ~3333 Mhz
    BIOS Version/Date TOSHIBA V1.30, 9/10/2004
    SMBIOS Version 2.31
    Hardware Abstraction Layer Version = "5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)"
    Total Physical Memory 512.00 MB
    SM Bus Controller Device ID (from Device Manager) PCI\VEN_1002&DEV_4353&SUBSYS_FF001179&REV_18\3&61A AA01&0&A0
    Motherboard Toshiba EDW10???
    Thanks fo your help.

    Hi
    As far as I know your unit must be an US notebook model and please try to check Toshiba US download page under http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp
    Please dont be mad on tech support but I dont see any reason why they should know every technical detail of your notebook. Toshiba has designed drivers for every hardware component that you can have anytime you want and install it 1000 times if you want. Toshiba guarantee that it will work properly and I dont see any problem there.
    Technical details you can get from Authorized service partners in your country.
    Good luck!

  • Help With Multimedia Audio Controller Driver For XP Pro

    Hello,
    Please help!!!
    I am trying to locate the Multimedia Audio Controller Driver for XP Pro for an MSI 645 ULTRA (A6547MS) Motherboard.  The audio device is integrated into the motherboard and Windows XP Pro is not recognizing the device.
    I have tried looking at MSI Support Website but am unable to identify which is the correct driver package to use.  
    I would also like to know if there are any related WinXP Supplement driver package needed for this motherboard.

    Did you do a clean installation of XP or you only use the upgrade function?
    I recommend you to do clean installation if you didn't.

  • Satellite P505D-S8934 mass storage controller driver for win7

    Dear Expert,
    Anyone know where can i download the Satellite P505D-S8934 mass storage controller driver for win7? please help.
    BR
    Gryloo

    Hi gryloo,
    You can download all drivers for your notebook on this page:
    http://www.csd.toshiba.com > Download
    As far as I know for Mass Storage Controller you have to install the card reader driver.
    Check this!!!

  • Writing USB-Serial Converter Device Driver for Windows CE 6.0

    Dear Developers,
          I have a Silicon Labs chip Cp2108. Its a Quad USB to Serial converter. It supports all the operating systems except Win CE. So I have the source code of the driver for Linux 2.6 / Linux 3.0. I have experience in Device drivers development
    in Linux.
      Question is How will I start coding driver for Windows CE 6.0. Can anyone point me to a best starting point on this topic. All I need to do is make this chip work with WIN CE 6.0. Can anyone point me to a Sample driver source code It will be great.
     Regards,
         Winston

    Dear Vinoth, 
            Thanks for the valuable reply. 
      I am confused a bit here. I need to make the external USB -UART bridge (CP2108) work on win CE 7.
       the driver in Path \WINCE600\PUBLIC\COMMON\OAK\DRIVERS\USB\CLASS\USBSER is using the built in USB controller
    hardware and making it as a Serial port right ? 
       How do you go about making the external USB -UART bridge work as a COM port ? 
     I have a document from SIlicon Labs which gives info about Device descriptors and interface commands . 
      Regards,
        Winston 

  • Unable to install lan realtek rtl8101 and network controller driver on windows server 2008

    Hi Guys,
    i am trying to install realtek rtl 8101 f amily driver and network controller driver on windows server 2008 but unable to install.
    Hp device Model.:- hp pavilion g4 1303au
    Model no.:- 5c03213jsh
    network controller Device ID: PCI\VEN_168C&DEV_0032&SUBSYS_1785103C&REV_01\4&211965BF&0&0020
    Name: PCI Device
    Device ID: PCI\VEN_10EC&DEV_5209&SUBSYS_3564103C&REV_01\4&34BC5A71&0&0030
    Name: SM Bus Controller
    Device ID: PCI\VEN_1022&DEV_780B&SUBSYS_3564103C&REV_13\3&2411E6FE&0&A0
    thanks,
    Amit Rai

    Hi:
    SMBus controller:
    Here is what I have done...I have zipped up and attached below under Attachments, the raw smbus controller driver files for you to unzip and manually install. 
    Download and unzip the file.
    Go to the device manager and click on the smbus controller needing drivers.  Click on the driver tab.  Click on Update Driver.
    Select the Browse my computer for driver software option and browse to the driver folder that you unzipped.
    Make sure the Include Subfolders box is checked and the driver should install.  Then reboot.
    Ethernet:  Download and install the 1st driver on the list.
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=7&Level=5&Conn=4&DownTy...
    Card reader (PCI dev.):  Download and install the first driver on the list.
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=15&PFid=25&Level=4&Conn=3&DownT...
    Wireless:  You will have to try the Vista driver for the Atheros wireless card...
    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&sp...
    Attachments:
    sp66185.zip ‏7 KB

  • Epson Expression 1600XL Scanner driver for Windows 8.1

    I have an older Epson Expression 1600XL A3 size scanner. There's no driver for Windows 8 and 8.1 Pro. When I turn the scanner on (on USB), Windows tells me that it is an unknown device. I tried to let the scanner software run in various compability
    modes and with administrator rights, but that does not Work. It tells me that "Epson scan cannot start" - probably because the content of the twain32 folder is wrong.
    I was advised by Epson to get a an Epson Scan Driver package for another scanner that does comply with Windows 8.1.
    The software Works, but it cannot find MY scanner on USB, - it looks only for the scanner the software is made for.
    I was then advised to go here and find help for making the Scanner software recognise the scanner.
    Any suggestions?

    You need to discuss this with the Epson Technical Support.  Based on information posted on the Epson Support website, the answer is probably "no":
    Scanner Driver
    05/31/13More Info
    Description: Although Epson does not offer a 64-bit driver for your product, there is a 3<sup>rd</sup>
    party solution available from a company called Hamrick. For additional
    information on Hamrick and their VueScan software, please visit
    hamrick.com. If you would prefer to purchase a new, 64-bit compatible scanner from Epson, please visit our
    Scanners page.
    Note: Hamrick's VueScan software does require purchase and is not supported by Epson.
    Compatible Systems: Windows 7 64-bit, Windows Vista 64-bit, Windows XP 64-bit
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • DESKJET 722C DRIVER FOR WINDOWS 7

    I RECENTLY UPGRADED TO AN HP PAVILION. MY PRINTER IS AN OLDIE BUT GOODIE 722C. I BOUGHT AN ADAPTER CABLE TO CONVERT THE 25 PIN CONNECTOR ON THE PRINTER CABLE TO A USB CONNECTOR. I TRIED HP'S WEB SITE TO GET A DRIVER AND HP SAYS THEY DON'T HAVE A DRIVER FOR WINDOWS 7. DOES ANYONE  HAVE A SUGGESTION ON HOW TO PROCEED FROM HERE BESIDES DEEP SIXING MY 722 AND BUYING A NEW PRINTER ?
    This question was solved.
    View Solution.

    Sorry, but the above will not work.  The Deskjet 722 is a host based printer and is not compatible with the Deskjet 6980 driver.  
    You can install the driver as follows:  connect the printer with the USB-parallel converter.  Click on Start, Devices and Printers, Add a Printer, Local Printer and select the proper port. When the list of printers appears click on Windows Update and wait a few minutes for the list to repopulate*.  Once the list repopulates select HP as the manufacturer (not Hewlett-Packard) and select the Deskjet 720c driver, Next.
    Do you have a 32 bit or 64 bit version of Windows 7?  If you have a 64 bit Windows 7 you will need a patch as the supplied driver crashes the spooler.  After installing the printer (but before printing anything, including a test page) install the patch available here.
    * Edit - If you get an error "Windows was unable to get a list..." when you click on the Windows Update button then see the workaround here.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HP Officejet 4255 driver for Windows 7, 32 bit. Not in pull up list or OS(can't update)

    HP Officejet 4255 driver for Windows 7, 32 bit.
    Driver is not in pull up list and not in OS(can't update OS basic). Almost all series are listed but 4200 series is missing. 
    After upgrade to Windows 7, it has become a problem. Some solution should be given.
    Can someone help?
    Regards,
    Raul

    Ok, I found in the Net the drive 7uw706ww.zip, which is Version 6.1.4.2, while the updated version is 6.1.10.5 (7UW708WW).
    I tried again the GPS, and it wasn't working.
    Anyway, before downgrading, I tried to reinstall the new driver, downloading and installing the .exe instead going through System Update.
    Result: now GPS is working (same place, same conditions, just 5 minutes later)!
    Don't know where the difference is...
    600, R52, T61p, X301

Maybe you are looking for