LSMW data Reading Error

HI,
In the LSMW process i am getting the below error while doing 9th step Reading data.
Unable to write to file 'E:\Z1XK01_ZXK01_ZXK01.lsmw.read'
Message no. /SAPDMC/LSMW804
Rgds
Mani

'E:\Z1XK01_ZXK01_ZXK01.lsmw.read'
what is E: ?
only a directory on your application server is allowed here (it must not be a directory from presentation server, which is your local PC(
go back into step 7 and correct the directory and file name for the read data

Similar Messages

Satellite A300D-135 - BIOS - System Configuration Data Read Error

After Booting a Satellite A300D-135 laptop the following error message appears:
<Several BIOS messages >
3070M Extended RAM Passed
512 KB L2 Cache
System BIOS shadowed
Video BIOS shadowed
ATAPI CD-ROM: TSSTcorp CDDVDW TS-L632H
Fixed Disk 0: TOSHIBA MK2546GSX
Mouse initialized
ERROR
System Configuration Data Read Error
Press <F1> to resume, <F2> to Setup
After pressing F1 the machine boots Windows just fine, but the error message is quite irritating while it comes with a loud BEEP
I've tried the following things so far (in this particular order):
- Loaded BIOS defaults
- Flashed the BIOS with latest BIOS (2.80) for this model type
- Reinstalled windows with HDD format
All of these haven't worked.
I've seen the same message appearing on several places on the internet (on different laptops with a Phoenix BIOS in common), but until now I haven't been able to find a working solution.
It might me a hardware issue, but all devices (vga, soiund, lan, wifi, usb, hdd) seem to work just fine in Windows, so this doesn't seem the issue). Another solution that is mentioned in some forums is replacing the cell battery. But because the laptop keeps time properly I don't think this is the case either.
Any ideas ?
Regards,
GJ

Hi buddy,
It seems that the power on self test has detected a hardware error... :(
I think such a problem like this you cant solve with loading the default settings in BIOS or with an update because its hardware based error.
In your case I would contact an authorized service provider. The guys can check your notebook because they have special diagnostic tools for Toshiba notebooks and access to all Toshiba databases I think.
You can find a list of them here:
http://eu.computers.toshiba-europe.com > Support & Downloads > Find an authorized service provider
Usually they work really fast and you will have a short repair time I think. In my case it did take only one week until I got my notebook back. :)

Pantone W530 Color Sensor help needed eccm25sensorData.dat read error

New Benzel installed to fix a bad track pad
On restart color sensor demanded re-calibration.
Error 22 message said ECCM25sensorData.dat file had a read error.
I can not locate file to install.
The Lenovo paid support solution was to suggest a full re install.!!
That is nuts, kind of like replacing a car engine because of a bad spark plug.
Anyone have a clue or work around?
And yes I tried unistalling and reinstalling the following: http://support.lenovo.com/us/en/downloads/ds015010
I get three buzz error when try initial calibration which then instructs to use the Sensor Replacement Utility which results in the error message.
Seem Windows 8 folks are having the same problem. What is up Lenovo??????????
http://forums.lenovo.com/t5/W-Series-ThinkPad-Laptops/windows-8-pantone-driver/m-p/1034813#U1034813
Windows 7 machine
Thanks!

Return Code = 12 for LSMW data read

Hi all,
I am executing an LSMW that will change 27 classifications for each materials. I have tested running a file with only 100 materials and all is good. Now I am testing a file with 40k materials (90MB file size) but when trying to "read data" from the imported file I get 'Error when uploading file 'J:\Unilever\Test Load LSMW files for 10-01-08\40k' 'Message no. /SAPDMC/LSMW_OBJ_070010'.
I am guessing there's a file size maximum which I have exceeded and that's why the LSMW is not capable of reading it but there in the past has been successfull executions of 25k - 50k materials...
Any help is appreciated, thanks!

There is also a limit on the length of the file name (with the directory structure). Please try reading the same file from the J drive (not under any subdirectory).
Hope this helps.
Lakshman

Raw Read Error Rate, Errors occurred while reading raw data from a disk

hi
when I turn my pavilion dv6 2170ee computer on screen shows below error.
system diognostics (F2) does not any work
and when my windows7 comming up this error was shown.
I install Hard Disk Sentinel software and this program shows below:
Failure Predicted - Attribute: 1 Raw Read Error Rate, Errors occurred while reading raw data from a disk. Indicate problem with the disk surface or the read/write heads.
There are 28 weak sectors found on the disk surface. They may be remapped any time in the later use of the disk.
26848 errors occured during data transfer. This may indicate problem of the device or with data/power cables. It is recommended to examine and replace the cables if possible.
Replace hard disk immediately.
how can I fix it?
may drive format (Fdisk) and renewing windows can fix it?
tanx and regards
Mohammad

Hello mohkhosh,
I see that you're getting an error indicating possible hard driver failure, that you have this message from 3 different sources. I will try to help you with this.
After reviewing everything you're looking at needing to replace the hard drive. I would suggest contacting support to see what they can do for you.
HP Technical Support, North America 1-800-474-6836. For all other regions click here.
Thank you for posting on the HP Forums.
I worked on behalf of HP.

SCOM 2012 R2 Reporting services installation error - data reader account

I have successfully installed SCOM 2012 R2 and SQL 2012 SP1 on the same server. I was trying to install the reporting server piece of SCOM.
When I get to the part that asks for a domain account, I get this error:
"Data Reader account provided is not same as that in the management server"
The account is not the same as the management server, and it does have read access to the data warehouse and reporting databases. Is there some other permission this account needs for reporting services?
Thanks.

Adding more info：
I usually create the following account for SQL:
AD accounts for the following to be used with SQL Services:
SQL Agent for SQL Server Agent
SQL Analysis Services for SQL Server Analysis
SQL Database Engine for SQL Server Database Engine
SQL Reporting Services for SQL Server Reporting Services
For SCOM I create the following accounts:
SCOM DR - Used to deploy reports
SCOM DWR - for writing data from the management server to the reporting DW
SCOM MSA - Performs default actions
SCOM SDK - Used for updating/reading information from the operations Manager Database - Needs to be local administrator on the SCOM server
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Data Sources error:[Macromedia][SQLServer JDBC Driver]No more data available to read.

I have just set up the developer edition coldfusion and a standard SQL Server. When trying to set up a datasource i recieve the following error: [Macromedia][SQLServer JDBC Driver]No more data available to read. I have no clue what this means. I have tried to find some documentation on this but with now luck. Can anyone help?
Here are some details:
SQL SERVER CONNECTION MANAGER:
Trying to connect to a localhost sql server
I have TCP/IP Enabled
Dynamic Ports is set to 0 under IP ALL
127.0.0.1 is enabled and the port is set to 1433
COLDFUSION ADMIN:
server: 127.0.0.1
port 1433
username/password set to null (using windows authentication)
Has anyone ran in to this issue?
Thanks for helping.

You can use domain credentials with CF. To do so you've got to create the datasource in Windows. Then, in ColdFusion you select ODBC mapping and point it to the Windows DS.
If I recall correctly, there's a switch in SQL 2005 that you've got to flip to allow SA rights to log in from the network. I could be way off base on that one though.
You may want to consider creating a new SQL account with its own password and assigning it to your target database (usually, I grant data reader and writer - your app may vary) and use those new credentials in your JDBC mapping in CF.

Error : No data read for fiscal year 2006 (error FDBL020)

Hello !
I have a problem in transaction FS10N, when i am trying do execute appear the error: No data read for fiscal year 2006 (error FDBL020), i tried applying the note 302263 (deleting the attributes of programs)but the attributes has been deleted. Anybody know a solution ?
Thank´s
Claudenir

hi,
i mean to check, whether there are items posted in that fiscal year.
Andreas

ORA-29400: data cartridge error/IMG-00703: unable to read image data error

Oracle Database 10g Enterprise Edition Release 10.2.0.2.0
ORA-29400: data cartridge error
IMG-00703: unable to read image data
ORA-06512: at "ORDSYS.ORDIMERRORCODES", line 75
ORA-06512: at "ORDSYS.ORDIMERRORCODES", line 65
ORA-06512: at "ORDSYS.ORDIMG_PKG", line 37
ORA-06512: at "ORDSYS.ORDIMAGE", line 927
is raised when the following trigger is processing certain JPGs (example). Other JPGs are handled as expected:
create or replace trigger photo_size_trg
before insert or update on photos
for each row
declare
photo_width integer;
begin
-- Check to see if the new photograph is different from the old one...      --
if dbms_lob.compare(:old.photo, :new.photo) != 0
then
    -- ...if so, check to see if it's wider than the desired 250 pixel        --
    -- maximum...                                                             --
    photo_width := to_number(ordImage.getMetadata(:new.photo)(1).extract('/ordImageAttributes/width/text()').getStringVal());
    if photo_width > 250
    then
      -- ...and if so, apply an image transform that will resize to the photo --
      -- to a maximum of 250 pixels wide, keeping the original aspect ratio. --
      -- There doesn't seem to be an elegant way of specifying a constraint   --
      -- in one dimension like this, so the height is specifed as a large     --
      -- enough value to cover all practical contingencies.                   --
      ordImage.process(:new.photo, 'maxScale=250 10000');
    end if;
end if;
end;Any thoughts/suggestions?

hi,
I am getting following error,kindly help me out to rectify this ..
thank you
ORA-29400: data cartridge error
ORA-00600: internal error code, arguments: [kokbCollTerminate], [13], [], [], [], [], [], []

3D data parsing error in Adobe Reader X 10.1.2

Hello,
I'm getting the annoying (and once fixed in version 9) 3D data parsing error with reader X 10.1.2 (on Windows 7 64bit), reading files that used to have no issues with previous versions (Italian locale). Anyone is having the same problem - or is able to give some suggestions? I've already tried to repair the installation, with no result. Any comment is greatly appreciated - this issue is causing major problems.
Best regards,
SV

Hello,
unfortunately it's a reserved document. I'll try to reproduce the issue with a different design and, if possible, I'll post a link to it.
Thank you!
Best regards,
SV

3D PDFs in Adobe Reader - "3D Data Parsing Error"

Hi,
I have just updated my adobe reader to 9.4.2 and I am regreting it already. I use 3D PDFs on a regular basis and the ones I have that worked perfectly fine in 9.4.1 now do not work. They come up with:
"A 3D Data Parsing Error has occured"
Does anyone know why this happens and particularly how to fix it, preferablly without going back to the older version of adobe reader.
Many thanks.

hey mark,
i've got the same problem after updating to 9.402 this message appears and i cannot open the 3d scene.
I found this (http://forums.adobe.com/message/2537356#2537356) thread and this link in it (http://communities.bentley.com/communities/everything_else_community/f/289/p/47047/106414. aspx#106414).
hope that these can help you.
regards frank

Read error when reading the master data of 0EMPLOYEE on demand, attribute 0

Hello All,
While loading data for HR data source 0HR_PA_OS_1 i am getting the below error message..
Error 1 in update.
Read error when reading the master data of 0EMPLOYEE on demand, attribute 0COMP_CODE
Please let me know how can it be resolved.
Regards
Rohit Parti

The problem occurs during data load from R/3. It was not occuring before. When I go to check the PSA contents I get a runtime error - GETWA_NOT_ASSIGNED.
Error analysis
    You attempted to access an unassigned field symbol
    (data segment 32821).
This error may occur if
    - You address a typed field symbol before it has been set with
      ASSIGN
    - You address a field symbol that pointed to the line of an
      internal table that was deleted
    - You address a field symbol that was previously reset using
      UNASSIGN or that pointed to a local field that no
      longer exists
    - You address a global function interface, although the
      respective function module is not active - that is, is
      not in the list of active calls. The list of active calls
      can be taken from this short dump.

Weblogic 11G error = BEA-000449 Closing socket as no data read from it

In My Weblogic 11G, i am getting Warning msg in my log file saying Closing socket as no data read from it
####<Nov 2, 2010 12:10:53 AM IST> <Warning> <Socket> <TradeServer> <TradeServer> <[ACTIVE] ExecuteThread: '8' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <1288636853607> <BEA-000449> <Closing socket as no data read from it on 95.66.7.15:58,089 during the configured idle timeout of 25 secs>
####<Nov 2, 2010 12:10:53 AM IST> <Warning> <Socket> <TradeServer> <TradeServer> <[ACTIVE] ExecuteThread: '8' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <1288636853607> <BEA-000449> <Closing socket as no data read from it on 95.66.7.15:58,088 during the configured idle timeout of 25 secs>
####<Nov 2, 2010 12:21:37 AM IST> <Info> <JDBC> <TradeServer> <TradeServer> <[ACTIVE] ExecuteThread: '23' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <1288637497701> <BEA-001128> <Connection for pool "IB_JDBC_Data_Source" closed.>
I have follow the following step
If you want to follow this solution. Go to Admin console -> Click on Domain->Configuration->Log Filters->create new Log filter.
I added this line in expression "(MESSAGE !='Closing socket as no data read from it during the configured idle timeout of 5 secs')"
Go to your server-(for each server you have to set it individually)->Logging->Advanced->Select this log filter for Standard Out or log file.
My Filter is "(MESSAGE !=Closing socket as no data read from it ')"
this is not working in weblogic 11G, any one have the solution to stop this msg.
Edited by: Amar_Shaw on Nov 3, 2010 1:40 PM

Hi Amar,
I think you have given the wrong string in the filter, you are getting "*Closing socket as no data read from it on 95.66.7.15:58,089 during the configured idle timeout of 25 secs*" and you have given in the filter "*Closing socket as no data read from it during the configured idle timeout of 5 secs*".
You can change it and see if that works for you.
Also the above option is just to suppress the issue which are getting which in this case is fine as its just a warning message, however you can even try to tune few of the follwoing parameters that too would help you to remove this warning message.
1. Set the parameter -Dweblogic.client.socket.ConnectTimeout=XXX, in the start-up script of the server which you are seeing this issue under JAVA_OPTIONS
Note: Where "XXX" is the value in ms.
Example:
-Dweblogic.client.socket.ConnectTimeout=500
2. Try tuning the duration time to a higher value from the below Console path
Server -> Protocols (tab) -> HTTP (sub-tab) -> Duration
Regards,
Ravish Mody
http://middlewaremagic.com/weblogic/
Middleware Magic | Come, Join Us and Experience The Magic…

LSMW Direct Input error

Hi gurus,
Help me out. When I reach the 'specify files' step of the LSMW, I encounter an error saying No logical path has been specified. This keeps popping out eventhough I have inputted the file's path. What's the problem?
Tnx in advance

Hi Obie,
In the "Specify files" step, you see following 3 nodes: Legacy Data, Read Data & Concerted data.
Double click on Converted data where you get a popup & you need to mention the logical path & Logical file name. Normally LSMW will be the logical path & specify the same path as presentation server path / File.
If you do not have a logical path - LSMW, create one with T. Code FILE.
Please check this also.
[Link|Re: LSMW 6.0 ECC and Logical Path and Logical File]
Hope it will work for you.
Regards.
R.Brahmankar

LSMW Customer Master Error

I am getting the following error in LSMW customer master master load in LSMW for only some of the records.
Field KNVV-WAERS. does not exist in the screen SAPMF02D 0310
Any one now the solution

Hi
Make sure you have mention the Currency in your screen or data.

LSMW data Reading Error

Similar Messages

Maybe you are looking for