LSMW IDOC method to upload material master

hi,
i want to upload the Material Master using LSMW Idoc Method.  I have not worked in LSMW IDOC MEthod previously
can anyone help me.. please..
ThankS IN ADVANCE
GUHAPRIYAN

hi Guhapriyan,
      In LSMW there are four method to migrate data.Idoc is one such method.You need to define three thing message type,
Basic type,enhancement and a check box for enable structure for EDI.Once you complete this ,it ready to transfer.Before that you need to go through 12 basic steps.
Hope this will help you.
Regards,
Albert

Similar Messages

  • Unicode error in LSMW IDOC method

    Hi Experts,
    Iam using IDOC method to create material master. I am uploading the material master views seperately. When I convert the file and process it in LSMW, system gives me the message, the converted file can not be processed. The reason system display for the same is the idoc table passes the value EDI_DC40U instead of EDI_DC40.
    But this is happening only for a single file and this is not a uni code file. I checked the port also. No where its flagged as uni code system.
    Please help me
    Regards
    Prathib

    Hi Sushanth
    To use IDOC method.
    You should create Partner profile.
    Pls create the same using WE20 transaction.
    After creating the same, you need to assign them in LSMW
    You can assign the same using  LSMW->SETTINGS->IDOC INBOUND PROCESSING
    Pls let me know, if you need further help on the same
    Regards
    Madhan Doraikannan

  • Maintain Structure Relations - LSMW - IDOC method

    Hi,
    Trying to use LSMW Idoc method to upload BP masters.
    Have maintained the ports, partner types, message types etc. When I reach the "Maintain structure relationship" step, I have a very big tree structure under EDI_DC40 when am trying to maintain the structure relationship between the source and the target in LSMW idoc method.
    Do I need to maintain my relationship at all the levels of the tree structure under EDI_DC40 or can I choose the nodes that are relevant and maintain a relationship only for them?
    Is there a short cut or a way where I can maintain relationship for each node under the target strucute EDI_DC40.
    Appreciate your inputs.
    SK

    Hi SK,
    There is no need to maintain EDI_DC40.
    In 'Maintain Structure Relations' step, you just need to create Relationship for the structure you want the information be uploaded in the BP. Mapping of the fields in the structure to your upload file's values will be done in next step. Hope the above helps

  • Re:Uploading of material master data using lsmw-idoc method

    Hi friends,
                While processing each idoc  one log on window is opening,and status of idoc is 51,eventhough i am passing material description to maktx of e1maktm,it is showing an 'No description is passed'.
    Colud you please tell me how to correct these errors,i am new to this lsmw-idoc method.
    Thanks in advance,
    Anusha.

    Thank you for reply.
    Actually I am uploading the data in flat file from file port to sap.
    In idoc inbound processing of lsmw i have created a file port and iam giving the logical system name of the same client.
    is this the correct procedure.
    Every time when i process each idoc one new logon window is opening and it is showing idoc status as 51.
    could you please tell me how to correct this one.

  • I want to upload material master (MM01) using LSMW with BAPI method

    I want to upload material master (MM01) using LSMW with BAPI method and also later on I may need to change the updated data.
    Which business object and Method I should use so that i can do both.
    Thanks
    kumar n

    Hi,
    The business object is BUS1001.
    Thanks,
    Murali

  • LSMW - RMDATIND Upload material master

    Hi All,
    I'm using LSMW direct input method (RMDATIND) to upload material master. However, I'm having issues on uploading material prices (eg: moving average price) where the format uploaded was incorrect.
    LSWM Data Source I've declared for VERPR (Moving Average Price) is character with 14 Length size. Values populated in upload file is eg: 132.93.
    The value been created in material master is-> 13  293,00.
    Can anyone advise on this issues? Is there any wrong to input value or data source declaration? Thanks.

    Hi Blue Sky,
    execute the whole process of LSMW in direct input  and go to SM35 to check and process the session manually,,
    -Regards
    Sid

  • Upload Material master with long text using LSMW

    Hello,
    i want ot upload material master data via MM01 using LSMW in following views: basic data 1 ,2,  purchasing, purchase order text, plant data 1,2.
    i have to upload long text in purchase order text with length more then 132 char. (approx 700 char long text). and i have text file in which long text is maintained in a single row. then how can i do it without formating text file or anyother possible solution.
    please help.

    ca u clarify how can i do it.
    suppos i have longtext   "Air cooled type air-conditioning unit complete with following components & distance between indoor & outdoor unit is  10 RMT.  A).Indoor evaporating unit comprising of cooling coils,insulated drain tray,20 micron HDPE washable filters,blower,motor,electical junction box etc. B).Outdoor condensing unit comprising of hermatic/semiharmetic compressor's.condenser coils,propeller/axial fans,motors,pressure switches/cutout etc.C).Charging of refrigerant gas & oil.D).Inter connecting refrigerating piping  of copper duly insulated with EXPANDED POLYETHYLENE tubing.E).Complete electical power wiring of AL.&Control wirng of copper required from indoor & outdoor units.Earthing of the complete system with 8 G G.I.wire.  F).Electrical panel will be completed with necessary starter,fuses,switches,timers,over-load relays,contactors,push button and indicating lamps,single phasing preventer etc..and also with remote control with cording. G).The panel should have 1 no.potential free contactor to connect with central fire detection system.The panel should have voltage scanner to ensure stabilized power input to the machine.H).Outdoor unit shall be mounted on MS angle base frame structure duly black painted with synthetic epoxy paint.I).The frame structure shall be mounted on MS plate & serrated rubber pads."
    then what i have to do changes in lsmw.?

  • LSMW : Idoc method , Business Activities custom fields data upload

    Hi guys
    I am uploading Business activities using LSMW IDOC method and below message and idoc type
    Message type CRMXIF_ORDER_SAVE_M
    Basic idoc type : CRMXIF_ORDER_SAVE_M02
    Using EEWB I added few fields to business activities , along with the standard fields I want to upload the customer fields also .
    I tried to Extend the Basic idoc type CRMXIF_ORDER_SAVE_M02, but it was not allowing me to Extend ( since it is generated basic idoc type ) I tried the other Basic idoc types for Business activities , I got the same problem
    the basic idoc type contains only two Segments
    E101CRMXIF_CUSTOMER_H_X (parent)
    E101CRMXIF_CUSTOMER_H (child)
    with out my custom fields
    pls help how can i add my custom fields ( added by eewb) to the basic idoc type
    for uploading custom fields
    thanks in advance
    Warm regards
    Rajasekhar

    You are going to need to create an enhancement of the standard IDOC type in order to get your custom fields to show.  I can't remember the exact procedure, but you will need to create a Z-type based on the existing type in the system.  When you generate the z-type the fields will be filled in.
    Look at the following thread and it will give the basic steps
    How to delete Extention
    Good luck,
    Stephen

  • I have uploaded Material Master thr LSMW but Materials are not saved.

    Hi
    i have uploaded  Material Master through LSMW but unfortunetly Matreials are not saved in system.

    Hi
    Check first with one record you are able to create the material Manually by using tcode MM01.
    Or Rerun the batch Input in Foreground mode so that you can see the error or whether Materila no is created
    I do not think so any test mode in Batch Input session.
    Check the Log in SM35 for your session if you have any error messages.
    Hope it helps
    Karthik

  • Problem in lsmw idoc method

    Hi all,
    iam uploading material master data(MATMAS) using Idoc method, iam getting the
    I doc status as 51(i.e document is not posted) when i checked the error it is giving the error as material number is not entered ........
    can any one help on this.
    regards,
    rams

    Check the converted data in LSMW. if material no. is not getting populated.. go to conversion program (LSMW--> go to-user menu -- display conversion program) and set a break point while populating IDoc data and check what's going wrong. and rectify the problem...

  • Unable to use SCAT to upload material master in ECC 6

    HI
    I am unable to use SCAT to upload material master in ECC 6,
    an error is triggering
    "Releases higher than 6.40 are not permitted
    Message no. TT005
    Diagnosis
    With Web Application Server Release 6.40, you cannot create new automated CATT test cases. However, you can create manual CATT test cases"
    canany body please help me to use SCAT
    Sreeram

    you have to read yourself:
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/1b/e81c3b84e65e7be10000000a11402f/frameset.htm
    I certainly do not use SCAT or SECATT to load master data, especially not material master.
    A material master has  dynamic screens, based on the material type the view selection will be different, based on entries made in MRP view fields become hidden or mandatory. Such things canot be done with a static recording.
    SAP provides batch input programs and BAPIs for material master load and additonally loading per IDOC in LSMW (which offers as well batch input and Bapi methods)

  • Issues in using LSMW IDOC method for Article Hierarchy

    Hi Experts,
    I am working on a scenario for uploading article hierarchy using LSMW idoc method.
    Details:
              Message type WMATGRP
              IDoc type WMATGRP01
    But as per my understanig, for processing, there should be a inbound Function module/Process code. But I am unable to find out any process code for this in tcode WE42/We60.
    Could you please help in this problem.
    Regards
    Krishan Kumar

    Hi Saeed,
    For example if you want t create bom through lsmw then we will *** two files one header and other item one.In the same way .In lsmw start by keeping the idoc method i will only propose at second step how many files it need. Just map the idoc and see. Post if need more help.
    Regards,
    Madhu.

  • Vendor Address is not updating in ADRC table by LSMW IDOC method

    Hi,
    I'm updating Vendor address data by LSMW IDoc method
    for this i'm using ADRMAS as msg type and ADRMAS02 as Idoc type.
    In partner profiles Process code given as BAPI for this.
    i maintained entry in TSADOBJ table LFA1 as OBJTYPE,1 as ADDR TYPE,0001 as context,LFA1 as TABLENAME,ADRNR as FIELDNAME, ADRC as TABLE PERS, ADDRNUMBER as FIELD PERS
    Idoc generating sucessfully.
    But data is not updating in database.
    i think the problem in TSADOBJ config.
    Please give exact configuration which can update vendor data.
    Thanks in advance

    be open minded. SAP gives several import methods to load vendors.  one of them is per IDOC.
    But the vendor master IDOC does not automatically create the adress master.
    And even more important, if you migrate data from one SAP system to another, the IDOC method is more straight forward than the batch input, because you can send the IDOCs from legacy system to new system, you will then have a 1:1 relation of the structure in LSMW and you can create vendor masters by knowing the new vendor number from an internal number range already in LSMW, long before you actually post the vendor. With batch input you can either post with numbers from external number range, or you just dont know the new number already in LSMW.
    And you dont need to download the data to Excel. And further, the LFA1 adress data has less information than the ADRC adress data.

  • Create Purchase info record using LSMW idoc method

    Hello Friends,
    I am trying to update Purchase Info records using LSMW Standard program RM06IBI0.
    But it is not updating the condition price details and scale Quantity.
    For that the  form  suggessted LSMW IDOC method. with : Message Type         COND_A / COND_A02.
    But i dont know is the info record created earlier to this step or else we can create both using this method
    at a time ?  Does anybody please suggest.
    ( Actually Purchase Info record created using transaction  ME11 ).
    Regards,
    Phaneendra

    you first create the info record and subsequently you load the conditions.
    become familiar with the condition tables and its key first. Check How table A017 and A018 are maintained.
    Intresting is the field VAKEY which is actually the link to your info record.
    This is a combination of vendor, material, purchasing org, plant , and info record indicator.
    data:  begin of ZZVARKEYA,
            ZLIFNR like LFM1-LIFNR,
            ZMATNR like MARc-MATNR,
            ZEKORG like LFM1-EKORG,
            ZWERKS like MARC-WERKS,
            ZINFTYP like EINE-ESOKZ,
            end of zzvarkeyA.

  • Problem LSMW + IDOC method for message type : MATMAS

    hi friends,
      I am using LSMW + IDOC method Message : MATMAS , idoc type : MATMAS03 .Setting every thing are fine. Finally Material is not created with error "message have been issued number : <idoc number>".
    data : material, industry type, material type, description, Basic unit of mesure.
    Please  help me.
    Balaji.T.

    Hi,
    I have nothing found regarding your issue. But maybe a look at SAP note 638058 will give you a hint.
    Regards,
    Klaus

Maybe you are looking for

  • Visual Studio 2015 CTP - Javascript support missing

    I had Visual Studio 2015 CTP 4 installed and now CTP6 - In both cases it was missing Javascript support. - Not showing syntax highlighting for .js file - Intellisense  not working for .js files Also when i go to tools/options/Text Editor - Javascript

  • HT3986 Installing Windows 7 on iMac using USB

    If I install windows 7 on my iMac using a USB eksternal hard drive, will I be able to use my USB after i´m done installing window 7????

  • SAP ABAP HR,  How to find out relationship in OM

    Hi Gurus, in ABAP HR , how to find out relationships in organisation assianment please clarify my Query.

  • Acrobat Pro 7.0.8 won't update

    I cannot update Acrobat Pro 7.0.8 in Mac OSX 10.5.8 on PowerMac7,3 (PowerPC G5 dual 2.0 Ghz) Finder and Get Info windows clearly show v.7.0.8 installed, as does Acrobat startup pane, but when I open updater AcroProUpd709_all.dmg and try to install, I

  • IOS 8.3 Airplay

    I just bought a new iPhone6 64 gb and updated it to iOS 8.3 I waas using a compact stereo Sony CMT-BT80WB via Airplay and never experienced a problem with iphone5 and iOS 8.2 after update the system doesn't see the stereo anymore, and Airplay doesn't