LSMW - Idoc method  - Urgent ??

Hi,
What is "Allow structure assignment to EDIDC40" ? on the object attributes maintenance screen (step 1) in the LSMW Idoc inbound processing.
we are using CRM 5.0 to test the BP creation with the help of IDOC methods.
any inputs or step by step IDOC BP creation guide/document will be highly appreciated and rewarded.
you can mail the IDOC step by step doc to [email protected]
Thanks
SK

Hello,
normally the control structure EDIDC40 is filled automatically by LSMW. In some special cases you may want to defined your own mapping rules. In these cases you can set the flag and will then see EDIDC40 in the step where you do the fieldmapping.
I would suggest not to set the flag unless you really urgently need to adopt rules
for the IDoc control structure.
Regards, Katja

Similar Messages

  • Issues in using LSMW IDOC method for Article Hierarchy

    Hi Experts,
    I am working on a scenario for uploading article hierarchy using LSMW idoc method.
    Details:
              Message type WMATGRP
              IDoc type WMATGRP01
    But as per my understanig, for processing, there should be a inbound Function module/Process code. But I am unable to find out any process code for this in tcode WE42/We60.
    Could you please help in this problem.
    Regards
    Krishan Kumar

    Hi Saeed,
    For example if you want t create bom through lsmw then we will *** two files one header and other item one.In the same way .In lsmw start by keeping the idoc method i will only propose at second step how many files it need. Just map the idoc and see. Post if need more help.
    Regards,
    Madhu.

  • Vendor Address is not updating in ADRC table by LSMW IDOC method

    Hi,
    I'm updating Vendor address data by LSMW IDoc method
    for this i'm using ADRMAS as msg type and ADRMAS02 as Idoc type.
    In partner profiles Process code given as BAPI for this.
    i maintained entry in TSADOBJ table LFA1 as OBJTYPE,1 as ADDR TYPE,0001 as context,LFA1 as TABLENAME,ADRNR as FIELDNAME, ADRC as TABLE PERS, ADDRNUMBER as FIELD PERS
    Idoc generating sucessfully.
    But data is not updating in database.
    i think the problem in TSADOBJ config.
    Please give exact configuration which can update vendor data.
    Thanks in advance

    be open minded. SAP gives several import methods to load vendors.  one of them is per IDOC.
    But the vendor master IDOC does not automatically create the adress master.
    And even more important, if you migrate data from one SAP system to another, the IDOC method is more straight forward than the batch input, because you can send the IDOCs from legacy system to new system, you will then have a 1:1 relation of the structure in LSMW and you can create vendor masters by knowing the new vendor number from an internal number range already in LSMW, long before you actually post the vendor. With batch input you can either post with numbers from external number range, or you just dont know the new number already in LSMW.
    And you dont need to download the data to Excel. And further, the LFA1 adress data has less information than the ADRC adress data.

  • Document type not defined in lsmw idoc method

    hello  iam posting Open AR Line Items for contract account using message type
    CTRACDOCUMENT_CREATE  using lsmw idoc method .iam getting error as Document type not defined but actually when iam creating document manually item is created with out any error that means it is defined and my functional consultant is also saying he defined document type.can some body explain me what is the  problem.
    Regards
    priya

    Check OMW9, here document type is defined for the transaction MIRO..
    Go to OMW9, click in the Document Type.
    Then double click on MIRO.
    Also check the sap notes which is referred in the similar thread Document type not defined f5814

  • Maintain Structure Relations - LSMW - IDOC method

    Hi,
    Trying to use LSMW Idoc method to upload BP masters.
    Have maintained the ports, partner types, message types etc. When I reach the "Maintain structure relationship" step, I have a very big tree structure under EDI_DC40 when am trying to maintain the structure relationship between the source and the target in LSMW idoc method.
    Do I need to maintain my relationship at all the levels of the tree structure under EDI_DC40 or can I choose the nodes that are relevant and maintain a relationship only for them?
    Is there a short cut or a way where I can maintain relationship for each node under the target strucute EDI_DC40.
    Appreciate your inputs.
    SK

    Hi SK,
    There is no need to maintain EDI_DC40.
    In 'Maintain Structure Relations' step, you just need to create Relationship for the structure you want the information be uploaded in the BP. Mapping of the fields in the structure to your upload file's values will be done in next step. Hope the above helps

  • Vk11 pricing conditions for LSMW  IDOC method...

    Hi Guru's,
    I am working on LSMW Idoc method. For Pricng conditions
    i am using Message type  'COND_A'  and basic type 'COND_A04'  .
    when we execute 14th step Idoc generation. I am Facing some problem like its displaying information message
           ' Partner type does not exist with the name ,'TYPE'.
      like this iam facing some problem.
    I already created partner profile in we20  clearly..
    This is the different requireent ,i never faced this problem earlier.
    Can any body help me in this regard.
    Regards
    Jayan Jalla,

    Hi,
    Activate the indbound settings in the LSMW by pressing the button
    'Activate Idoc Inbound Processing'.
    Regards,
    Shan

  • Application logs for log handling in lsmw idoc method

    Hi Abapers,
          Im using LSMW IDOC method for data transfer from legacy to sap system.Now the requirement is to handle application logs for log handling i.e i have to make use of custom report to handle logs,can any one tell me what all steps to be done for this or if any one can share a link related to application logs would be greatly appreciated.
    Thanks.
    Edited by: saeed.abap on Dec 27, 2011 5:13 PM

    Hi Saeed,
    Please check with this fms
    1) BAL_DSP_LOG_DISPLA
    2) APPL_LOG_READ_DB
    3) IDOC_GET_MESSAGE_ATTRIBUTE
    There is a wiki [Error Log Lsmw|http://wiki.sdn.sap.com/wiki/display/Snippets/ErrorLogProgramforBAPIandIDocMethodin+LSMW] available.
    Regards,
    Madhu.
    Edited by: madhurao123 on Dec 28, 2011 8:25 AM

  • LSMW IDOC method to upload material master

    hi,
    i want to upload the Material Master using LSMW Idoc Method.  I have not worked in LSMW IDOC MEthod previously
    can anyone help me.. please..
    ThankS IN ADVANCE
    GUHAPRIYAN

    hi Guhapriyan,
          In LSMW there are four method to migrate data.Idoc is one such method.You need to define three thing message type,
    Basic type,enhancement and a check box for enable structure for EDI.Once you complete this ,it ready to transfer.Before that you need to go through 12 basic steps.
    Hope this will help you.
    Regards,
    Albert

  • LSMW : Idoc method , Business Activities custom fields data upload

    Hi guys
    I am uploading Business activities using LSMW IDOC method and below message and idoc type
    Message type CRMXIF_ORDER_SAVE_M
    Basic idoc type : CRMXIF_ORDER_SAVE_M02
    Using EEWB I added few fields to business activities , along with the standard fields I want to upload the customer fields also .
    I tried to Extend the Basic idoc type CRMXIF_ORDER_SAVE_M02, but it was not allowing me to Extend ( since it is generated basic idoc type ) I tried the other Basic idoc types for Business activities , I got the same problem
    the basic idoc type contains only two Segments
    E101CRMXIF_CUSTOMER_H_X (parent)
    E101CRMXIF_CUSTOMER_H (child)
    with out my custom fields
    pls help how can i add my custom fields ( added by eewb) to the basic idoc type
    for uploading custom fields
    thanks in advance
    Warm regards
    Rajasekhar

    You are going to need to create an enhancement of the standard IDOC type in order to get your custom fields to show.  I can't remember the exact procedure, but you will need to create a Z-type based on the existing type in the system.  When you generate the z-type the fields will be filled in.
    Look at the following thread and it will give the basic steps
    How to delete Extention
    Good luck,
    Stephen

  • Re:Uploading of material master data using lsmw-idoc method

    Hi friends,
                While processing each idoc  one log on window is opening,and status of idoc is 51,eventhough i am passing material description to maktx of e1maktm,it is showing an 'No description is passed'.
    Colud you please tell me how to correct these errors,i am new to this lsmw-idoc method.
    Thanks in advance,
    Anusha.

    Thank you for reply.
    Actually I am uploading the data in flat file from file port to sap.
    In idoc inbound processing of lsmw i have created a file port and iam giving the logical system name of the same client.
    is this the correct procedure.
    Every time when i process each idoc one new logon window is opening and it is showing idoc status as 51.
    could you please tell me how to correct this one.

  • Create Purchase info record using LSMW idoc method

    Hello Friends,
    I am trying to update Purchase Info records using LSMW Standard program RM06IBI0.
    But it is not updating the condition price details and scale Quantity.
    For that the  form  suggessted LSMW IDOC method. with : Message Type         COND_A / COND_A02.
    But i dont know is the info record created earlier to this step or else we can create both using this method
    at a time ?  Does anybody please suggest.
    ( Actually Purchase Info record created using transaction  ME11 ).
    Regards,
    Phaneendra

    you first create the info record and subsequently you load the conditions.
    become familiar with the condition tables and its key first. Check How table A017 and A018 are maintained.
    Intresting is the field VAKEY which is actually the link to your info record.
    This is a combination of vendor, material, purchasing org, plant , and info record indicator.
    data:  begin of ZZVARKEYA,
            ZLIFNR like LFM1-LIFNR,
            ZMATNR like MARc-MATNR,
            ZEKORG like LFM1-EKORG,
            ZWERKS like MARC-WERKS,
            ZINFTYP like EINE-ESOKZ,
            end of zzvarkeyA.

  • Problem LSMW + IDOC method for message type : MATMAS

    hi friends,
      I am using LSMW + IDOC method Message : MATMAS , idoc type : MATMAS03 .Setting every thing are fine. Finally Material is not created with error "message have been issued number : <idoc number>".
    data : material, industry type, material type, description, Basic unit of mesure.
    Please  help me.
    Balaji.T.

    Hi,
    I have nothing found regarding your issue. But maybe a look at SAP note 638058 will give you a hint.
    Regards,
    Klaus

  • Multiple Source Structure in single flatfile using lsmw idoc method

    Hi Abapers,
                we have a requirement for Business partner Data mIgration into CRM system using LSMW idoc method,I got a flat file
    which has multiple source structures like(header structure,Tax structure,Mailstructure,Identification structure,bankdetails structure,card strcuture........etc of 12 structures) with identification for each structure. can any one help me how to handle this in lsmw or any link of this kind of scenario will be helpful for me .
    Thanks and Regards,

    Hi Saeed,
    For example if you want t create bom through lsmw then we will *** two files one header and other item one.In the same way .In lsmw start by keeping the idoc method i will only propose at second step how many files it need. Just map the idoc and see. Post if need more help.
    Regards,
    Madhu.

  • Import Product Price and Condition using LSMW IDoc method

    Hi Friends,
    I am working on the Product Import to CRM from flat file using LSMW IDoc method using the "CRMXIF_PRODUCT_MATERIAL_SAVE" message type.
    I am able to import the entire product with its required details except the Price and its conditions.
    Can anyone please let me know which structure or with message type to be used to import the Product Price and condition using the IDoc method.
    Please pass on your valuable comments.
    Thanking you,
    Naveen

    Hi Naveen.
    I am doing the same thing but only the product gets created and the details like short text, unit etc. do not get populated. The idoc gets processed successfuly. Can you share the fields that are required to be mapped or are mandatory.

  • Error while uploading the data Using LSMW - Idoc method

    Hi Experts,
       I am working on LSMW using Idoc method. Till 12th step (Display converted data) i wasn't got any problem. For the Idoc method, I have to specify details to Idoc inbound processing from the menu settings.
    In that screen I have to specify file port, partner type and partner no. I have created a file port ZFILE. Can u tell me what ahould I pass in that screen? Where should be the file i.e in the application server or presentation server? What should be the directory and function  module. Can u provide step by step?
    After that I have to specify partn.type. What should I select for that?
    After that I have to specify partner no. Whether it is inbound or outbound?
    I got No data found for the following detials.
    port - ZFILE
    in the inbound file tab, e:\ as physical directory; EDI_PATH_CREATE_USERNAME as function module.
    Partner type - US
    Parnter no.  - LSMW with the inbound parameters message type - MATMAS and Process code - MATM.
    Please tell me how can I upload properly? Please don't ignore as i am asking same question again becasue I have gone through related threads also. But i didn't find the exact requirement.
    proper documentation will be rewarded.
    Thanks in Advance.
    James.

    Hello,
    I could identify the error. It was due to incorrect UOM. Problem resolved.
    Thanks,
    Madhura

Maybe you are looking for

  • Lightroom book

    I have installed Lightroom v 5.6 (latest) on my desktop computer and on my Laptop.  I have made a book. I get up one exclamation mark at the pictures and the text "this photo is offline or cannot be found. It will be omitted when you print your book»

  • J2me error

    when i add (implements CommandListener) in my class the netbeans appear to me(class is not abstract and dose not override abstract method) import javax.microedition.midlet.*; import javax.microedition.lcdui.*; public class Midletstates extends MIDlet

  • Creation of an Application Configuration and corresponding Component Config

    I try to create an application configuration , by going  to the object tree at the left hand side and do right click on the application object and select Create/Change Configuration but i get the following error text  : Screen output without connecti

  • When hrflatfile reconciliation it giving below error

    Hi, My flat file users.txt  contains below details in stage C:\stage\External Files directory and mapped successfully. #GTC Trusted Source userid,firstname,lastname,manager,EmployeeType,Org,Role,department,location,position,Source,email ksamson,Karl,

  • Drop in associated/authenticated clients every hour

    Hi all. Anyone have any suggestions as to what might be causing this: It seems that the drops in clients occur every hour. And yes... we've got reports of unstable wireless connections, but no one reports drops every hour. So my question is: are ther