LSMW- Material Master Performance issue
Hi All,
We are using the prgoram RMDATIND to upload material master through LSMW and having a problem of performance while using this technique.
Have 4Lak records to be uploaded in 10 hrs as it required to upload all views.
Pl advice except separate the records.Is that any option to run the file in parallal views?
Regards,
Asirvad
I think best option is to break the file up into many chunks that can be processed in parallel. If this is not an option then you need to consider what is on the selection screen of RMDATIND, for example "Create change documents". Is this required for your purposes as this takes a lot of time.
The other thing I would suggest is to talk to your basis team because there are settings and config they can put in place to aid this load.
Similar Messages
-
Hi gurus,
I want to upload material account assignment group in existing material master records. There are n no of material mater records.
It has to be uploaded based on the valuation class.
For each valuation class, a material acct assignment group is created. All materials are extended to 31 plants.
While I try to upload using tcode mm17, I cant upload material acct assignment group using the valuation class since in valuation tab,acct assignment group is not present.
Kindly help to sort out this issue.
Regards,
Vimalin MM17
Select sales org Data for Material - table MVKE
select valuation data for material - table MBEW
Execute.
Enter your selection (you can add further selections e.g. valuation class field by clicking the button choose selection fields on the bottom.
Execute.
now you see all records to be changed.
Click select fields. Pop-up is coming.
Choose Account assignment group field and continue.
Account assignment group field has appeared and you can now enter the new value .
Click the colomn header of the field to be changed.
Then click button change field values.
You can see immediatly the new values in the records below.
If you click save, then the new values are written to the database. -
LSMW Material Master - create several valution types within one Run
Hello @ll,
i created a LSMW for material master migration, and i would like to create up to 4 different accounting views (based on different valuation types) within one LSMW Run.
As there is the Field BWTAR on Structure BMM00, and the accounting fields on Structure BMMH1 i dont know if:
1. this is possible in general with LSMW and
2. if possible where i have to set the "transfer_record" commands...
Does anybody have experience on this?
BR,
Gregor H.I never used the standard batch input method, so I cant answer this part. But with IDOC as import method I do this right now and it works without any problem
The transfer record command is set in the section of processing time __END_OF_RECORD__
you can display this section when you are in field mapping and conversion rules. choose from menu Extras > Layout and activate all boxes. -
LSMW: Material Master Data migration
I will be migrating material master data using LSMW IDOC.
I also want to migrated associated material class data.
The question is:
How do I extract the material class data so that I can load them with LSMW IDOC CLFMAS after the materials are loaded?Hi,
You have 2 possibilities.
1. If it is 1:1 transfer for source SAP system to target SAP sytem ( without data modification ) you to establish the ALE interface and distriute by using the prg: RBDSECLF
2. If it is a transfer of CLF data between 2 SAP systems where you need to modify the data based on some rules after you extract the data from the source system, you could extrace the data from Legacy by BAPI: BAPI_OBJCL_GETDETAIL. Once you extract the data, you could process as per the reqmt, & load the data by LSMW either by DI or by IDoc method.
Hope this helps.
Best Regards, Murugesh -
I am trying to upload data via batch input in LSMW for material master.
I am getting error - Problem inserting or updating MLAN
The tax category fields are not appearing in converted data.
Kindly help.Hi
Welcome to SCN.
Post your questions in correct forum.Please post your question in Data Transfer forum for quick response.
Cheers,
Hakim -
Material Master duplication issue
hi,
We are EPC company where we procure different kind of Pipes , flanges other erection materials for e.g.
We have a large number of variations under these categories which is forcing us to create a new material master where tere is slight deviation .
e.g. we have a 30" MS PIPE . But it can have dis 32",34".36",thickness 2", 4",6" , iner lining may be of teflon, glass...
so there are large numbe rof combnation whic can happen. this end up in creating large numbe rof materials.
Is there any way to minimise numbe rof materials in this?
Also, we are facing issue of duplication of materials.
For e.g. different Sites may ask for same material . so same material may be created with different description for different sites. Is there any way to standardise material description template?
Thanks
Manojmanoj.ltrm wrote:
hi,
>
> We are EPC company where we procure different kind of Pipes , flanges other erection materials for e.g.
>
> We have a large number of variations under these categories which is forcing us to create a new material master where tere is slight deviation .
>
> e.g. we have a 30" MS PIPE . But it can have dis 32",34".36",thickness 2", 4",6" , iner lining may be of teflon, glass...
> so there are large numbe rof combnation whic can happen. this end up in creating large numbe rof materials.
>
> Is there any way to minimise numbe rof materials in this?
>
>
> Also, we are facing issue of duplication of materials.
>
> For e.g. different Sites may ask for same material . so same material may be created with different description for different sites. Is there any way to standardise material description template?
>
>
> Thanks
> Manoj
Hi Manoj,
The best way to deal with this scenario is to use "Configurable Materials".
You need to create (variant configuration with class type 100, 200, 300) where you can define the variations in the material having same application and features such as yours.
Go thru this thread..
http://help.sap.com/saphelp_46c/helpdata/en/9f/fb79385feddf6ae10000009b38f8cf/content.htm
Regards
Shiva -
Material Master Archiving Issue
Hi,
I have Issue with Material Master archiving. I got an error message" MARD:Reservation /Dependent requirement exist.
I have checked in MB24-Open reservations. All Reservations are closed. No stock existed. No Transfer requirements & No stock in transit.
I ran MBVR also.
How to solve thsi problem.
Regards,
Sridhar.Hi Sridhar,
You may refer to note [900537 |https://websmp210.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=900537]for details:
Error W4017 - Reservation/Dependent requirements exist:
This message indicates that some reservations exist for the material you
are trying to archive. You should be able to see the existing
reservations using table RESB. Firstly, you must archive the document
that caused the reservation to be created, for example Production Orders
then you must archive the reservations themselves. Afterwards, it should
be possible to archive the material.
Note 30781 may assist if you identify that these requirements stem from
purchase requisitions.
Hope it helps.
Thanks and regards,
Polly -
Material Master weight issue while packing
Hi Frnds
I have an issue with the incorrect weight calculation while packig the material in delivery.
The business process requires the product to be sold in packs (5/10/25/50/100). The product is placed in a tray that holds these products which is a pre-packing step. Therefore the weight of the tray is included in the material master.
But the wieght of the packs vary within themselves, the weight of a 10 pack tray will be diff then the weight of a 100 pack tray. Also it can be possible if a customer orders a 100 pack product the our shipping team may give him 2packs of 50 instead of one pack of 100. The weight variance is generally observed on lrge orders, when the acual weight is off XX lbs than the SAP calculated weight.
How do i take the weigh of the tray into consideration when delivering different packs???hi
u can go with pop1 instruction, where in u can specify whether the weight of the packaging material to be considererd or not can be specified.hope u can go with packaging instruction to solve ur issue.better consult with ur SD consultant. -
Hi all,
1)I am uploading materials by LSMW - Direct input method.
[5th step in LSMW(Maintain Field Mapping and Conversion Rules).]
I would like to know the field name for mapping for Tax classification field in Sales Org 1 view of Materail Master.
I need to upload this field with 1 as input.
How do this?.
2) What would be the input value for Check Box in Material Master for LSMW.
Thanks in Advance.Hi,
1.) You can map this value with the field TATY and TAXM.
2.) The check box which you are checing on the material master would be represented by 'X' in the LSMW mapping.
hopefully this is helpful for you.
Regards,
Lalit Kabra -
Dear All ,
I m display a material in MM03 , But an error thrown by system as below
"The material XXXXXXX does not exist or is not activated
Message no. M3305 "
Can ne one suggest what it means , either the material does not exists or it needs to be activated ?
All help will be appreciated .
sap11
Edited by: sap11 on Sep 3, 2009 3:29 PMHi,
It means that material is not created in the system or someone has defined the date to be used i.e active from to date in t.code MM13. And if u r getting this message for some particular view than it means view is not created for the material.So u have to create the view before displaying it.
Regards,
AM. -
Hi Experts
I have a requirement to block the newly created materials from using in procurement or production until a BOM and Routing
is created for the same.
I tried applying a delete block after creating the material and thought that the same can be removed after creating BOM and Routing. But I realized that SAP doesn't allow creating BOM for a material with deletion flag.
I am wondering if there is any way we can achieve this functionality. Appreciate any help.
Thanks
SrinivasHi,
You can block the material at Client level and at Plant level
At Client Level in MMR under Basic data screen X-Plant Material Status
At Plant level in MMR under purchasing screen Plant Specific material status
Regards
AKM -
PO text using lsmw MATERIAL MASTER
Hi , how to upload PO text trhough LSMW as its only loading 132 char, if i have 400 char how to load.
there is a structure in lsmw BMMH7, but what to pass in tdformat and tdline and TDSPRASISO
thanksHi Heilman ,
thanks for the reply, but is there any other way by which I can upload PO text as I have potext in one column and line. I am using LSMW , where it concatenates to 132 character, but i have to upload full say 400 char text.
thanks
bobby -
LSMW datamigration material master with multiple distribution channels
Hi,
We plan on using the LSMW to migrate our customer's material master to a ECC 6.0 system.
Currently we use the BMM00 and BMMH1 structures, but there I can specify only one distribution channel.
Does anyone know how to include multiple distribution channels in LSMW material master migration?
Thanks in advance for your support.
Edited by: Mohammed Qasim Malik on Jan 21, 2008 10:01 AMyou need an extra record in your source per distibution channel.
Alternative you can create the extra record with a small Abap code in LSMW in section __END_OF_RECORD__
There you habe in standard the code:
transfer_record.
just add after this statement a statement that gets the additional wanted distribution channel into the distribution channel field.
BMM00-VTWEG = 'xx'.
transfer_record. -
hi ,
does anyone have a template for material master, which can be used for LSMW data mapping?
Please forward it to [email protected]
ThanksThe std template can not be work for all bussiness. you have to create based on your requirements.
to creating template is not big deal. you just select the fields which you want to populate while createing material master and certain fields which are required entries.
Or just go to the structure of LSMW - Material master and select allthe fields.
Go to SE11
and enter the structure one by one and copy the fields to your template
BMM00, BMMH1, BMMH2
BMMH3
BMMH4
BMMH5
BMMH6
BMMH7
BMMH8 -
Issue in LSMW for material master using standard input program RMDATIND!!
Hello guys,
I have a issue in LSMW for material master.
I have a custom field in MARA table. which I want to add in my LSMW.
I added the field in BMMH1 structure. I'm passing the value to this field, But it is not populated in the table when I run it.
Is there anything else I need to do apart from addition of field in the structure BMMH1.
Thanks in advance for your help.
Regards,
Sumeet....see oss note 44410, it gives you a step by step overview.
https://service.sap.com/sap/support/notes/44410
Maybe you are looking for
-
External Hard drive on mac and pc??
Hello, Quick Question...sorry if this has already been discussed.. Set up my ipod as an external hard drive on my mac, but can't plug it into a pc without it asking me to format it....obviously I say no to this, but it won't let me open it without fo
-
\I have uninstalled ITunes,,and re installed it nwo prob a doz times,, If i do not get a MSVCR80.dll is missing ,, then it seems to install only to have I tunes say it was not installed correctly and error msg 7 windows error 126,,what do i do?
-
Table name passed in as a parameter
Is it possible to determine a tablename for a query dynamically? For instance: Select * From :parameter
-
Reorganization of Tables in Database
Did anyone reorganized the tables in database to reclaim the fragmented space within the Tablespace. If so please suggest how to identify which are all the tables have more fragmentation in order to reorganize it within the tablespace. Regards, Subra
-
Vista - gaming lag after creating a static ip
Using a W54G but my problem is with my wired computer Recently I have had friends not being able to find the server I create for a game we play called Rainbow Six Vegas. For what it's worth these same friends were connecting a week ago when it was un