LSMW testing - Development server to Production server

Dear Experts,
I have made a LSMW for ROH material in development server by changing External number ranger to Internal number ranges.
It is working fine & is generating internal number ranges.
What i wish to know is, what kind of testing (tables or transactions) will be required before using this LSMW in Production server?
Thanks!
Syed

Hi Syed,
Once you have tested LSMW in DEV, and found OK, transport it to PRD.
You can also take a test run for LSMW in PRD.
Also check some basic transactions of procurement on this material in PRD if possible
Hope this will help U
Regardsm
Amol

Similar Messages

  • SharePoint 2013 : Migration of customization from development server to production server

    Dear all,
    I have the following scenario and servers:
    1. Development Server; (Server where our developers would develop our dms and/or enhancement based on change request)
    2. Test Server; (Test server where our users will test the system (dms) and/or enhancement requested)
    3. Production Server (Our production server where only our end users will have access , developers wont have access to this env.)
    My question is how to migrate our changes from development server to test server and finally to production server?
    Is there a mechanism/ guide /best practice approach for this?
    Any help/guide would be greatly appreciated.
    Many Thanks & regards
    Vinay

    Hi Vinay, 
    Thanks for posting your issue, Moving stuff from environment to environment will depending on your stuff;
    Content, like list items and documents, can't be easily moved. They can be moved with 3rd party solutions, or custom code. You can do it with a C# solution or even using PowerShell.
    Stuff like lists, libraries, master pages, CSS, etc. should be packaged in a solution file, either sand box or farm solution. This solution file can contain all of the assets you require, and then it can be deployed into a new environment, which then provisions
    all the stuff you need (it could also load up test/sample data if needed)
    Another nice solution, if you're working with a brand new site, is to back it up and restore it into another environment. That helps get the bulk of the stuff copied over, and then you can use one of the above methods for continuing updates.
    Also, check out below mentioned URL to move content from on environment to another environment
    http://www.sbrickey.com/Tech/Blog/Post/SharePoint_environments_-_dev_test_and_prod
    I hope this is helpful to you, mark it as Helpful.
    If this works, Please mark it as Answered.
    Regards,
    Dharmendra Singh (MCPD-EA | MCTS)
    Blog : http://sharepoint-community.net/profile/DharmendraSingh

  • Transport from development server to production server in BW

    I need step by step procedure to transport contents from bw-development to bw-production server.
    please forward me if you have one .
    thanks
    ajit

    Hi Ajit
    Post this to BI form. I think that will be the right place for this query.
    BI Form
    BW transports
    Thanks
    Gaurav

  • How to export tables from development server to production server

    HI,
    Any body plz let me know how to export tables from development server to production server. what are the user names and password i need to ask my manager to do that. what are the requirements i need to ask him.
    Plz reply me ASAP.
    Thanks in advance.

    hi buddy
    first of all you should let us know the environment of production and development servers
    database versions
    and you need to have userid which has privilege to export tables of other schema. userid(owner) of the tables you want to export.
    Traditional way
    export tables in development server and then ftp to production and then import
    in the above case you should have similar database structure(tablespace etc) to avoid errors...
    if there are few tables only , you can use dblink instead of export and import...

  • Transporting requests from development server to production server

    Hi gurus,
    can anyone tell me how to transport requests from development server to production server.

    You can use SAPGUI now instead of calling tp at OS level.
    Serious: Totally wrong forum!

  • Transporting from DEV server to Production Server

    Dear Experts,
    Like in ABAP and other SAP modules we are having Transport Requests to transport from Dev server to Production server In XI how can we transport all the configuration done by me from Dev server to Production server.

    Hi,
    In XI we can transport in two ways :
    1) File Transport
    2) Using CMS which needs configuration to be done
    Using the File Transport you can easily the Export the Objects and Import the Objects in the Target system.
    Select the Object in the Design or Configuration ->right Click you will find Export option.
    When you select the It creates the .tpz file which can be imported in the Target System
    Using file transfer or CMS we transport xi objects.
    Transporting XI from DEV to QA
    Look into this blog for how to export / improt IR and ID objects,
    XI Software Logistics II: Overview
    XI Software Logistics 1: SLD Preparation
    Transporting IR,ID Objects using File System
    http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/a8/5e56006c17e748a68bb3843ed5aab8/frameset.htm
    Regards
    Ganga

  • DMS uploading from Development server to Production server[GO LIVE].

    Hi, All,
    I have configured DMS at client palce. Here they don't have quality server.
    What we configured will be tested in development it self. So in the unit test there is no errors at all and
    uploaded some documents in the development also.
    So i want to know how i could tranfer request and full DMS configuration to production server[Go Live].
    1.Wheather I could need Basiss Help.
    2.What are all precautions i could take before and after 'go live'
    3.What are all requirement needs to 'go live'.
    plz give procedure i details
    Rgds
    Ben

    hi,
    there no mandatory of quality server to test , if ur confident, u can directly transport to production
    For request transporattion its better to have basis person, if u know the procedure, u can also import from production server.
    Before that release all transport request in devp server.
    After transporting to prod server check wheather all customising setting imported or not, wherever necessary u create master data in production system it self(Class and characterstics, and number ranges).
    For going live u need to create all roles and autorization and need to assign to respective user ids.
    award points if useful
    regards
    sham

  • Sync from development server to production server

    Hi all,
    After testing the changes on my development server, say packages or tables, I either manually commit the change to the production server by re-typing in commands if the chages are not much, or expdp/impdp if there are a lot of changes.
    Is it possible to sync between the two servers instead of doing things like above ?
    ( I am using XE 10.2.0.1 on Suse 10.1 )
    Thanks for your advice,
    Vu

    Hi vuatsc,
    Imp/exp can transfer all schema or new objects only ... what about modified ones?
    Oracle Designer can do this but it is not free.
    You may save your work in scripts and apply them first at development server, then if all is o.k. - to prod server.
    K.Borissov

  • 2.DMS uploading from Development server to Production server[GO LIVE]

    Hi All
    Is it all document type [dms] which r created in development server, these will transefer from development to production server by [uploading]transport request.
    Or is It needs Basiss Help.
    Rgds
    Ben.

    hi,
    I think for moving customization request to production, u dont need help of basis, if u have authorization then u can transport the request.
    Before moving first identify which are the request number u want to transport and release them using t code SE10 in development server.
    Go to production server, execute STMS t code for importing the request from devp server.
    Once ur request moved to production successfully then all customization will be available in production system except number ranges and class and characterstics.
    If ur using classification system, then create class and characterstics in production system it self.
    award points if useful
    regards
    Sham

  • Migrating Endeca Application and Data from development to a production server

    We need to move an Endeca app (including data domain) to a production server from a development server
    I installed EID 3.1 in the prod server successfully and this is what I did after the install:
    1. Created a new application in Studio (name: JULY2014POC)
    2. Manage Pages - Import the .lar file
    3. Copy JULY2014POC.worddat file and JULY2014POC_indexes folder to new server, location: domains/endeca_server_domain/EndecaServer/data with all the servers down. Then restarted endeca server, ps server, and studio server.
    4. When I try to create an Endeca Server connection it gives me error (Connection definition format is valid but unable to connect.)
    5. This is my entry:
      "contextPath": "/endeca-server",
      "currentFunctions": [],
      "dataDomainName": "JULY2014POC",
      "name": "JULY2014POC",
      "port": 7001,
      "restrictedToRoles": ["Administrator"],
      "server": "10.2.192.171"
    6. When I run any endeca-cmd at OS level I get the following Warning (4 times):
    $./endeca-cmd.sh list-dd-profiles
    <Oct 29, 2014 4:51:33 PM EDT> <Warning> <oracle.wsm.resources.policyaccess> <WSM-06210> <An instance of the interface oracle.wsm.policymanager.IUsageTracker bean for the local repository at path "" was not available for configuring the oracle.wsm.policymanager.accessor.BeanAccessor repository accessor for context "ResourcePattern [pattern=DOMAIN/weblogic/endeca_server_domain, subjectType=MANAGED_DOMAIN, terms={PLATFORM=weblogic, SUBJECT_TYPE=MANAGED_DOMAIN, DOMAIN=endeca_server_domain}]".>
    default
    What am I doing wrong?  Can someone please help me?  thank you

    Hi Sergio,
    How the data import and export works is what you have to look into. Whenever you export your content it gets exported to a particular directory. If the same directory should be referenced by the code base as well which would be mentioned in the properties file for fetching the configurations.
    If they are not aligned they won't pick it up. Also you will have to create pages like endeca-server and make it the default page in your properties file.
    Hope u cross this hurdle soon.
    Thanks
    Karthik V

  • How to deploy Portal from Development server to Production server ?

    Hi all,
    I am new to OAS Portal. I have a question :
    I am developing the portal in development server, if I want to deploy it into production server, how can I do that ?
    Is there any docs on this ?
    Thank you very much,
    xtanto

    Assuming you are working with Portal 10.1.4, please see the following link for this documentation. It would also help in better planning for your deployment scenarios if you can briefly skim over the two chapters before the one in this link, specially to see what would be your options to lay it out on multiple environments.
    http://download.oracle.com/docs/cd/B14099_19/core.1012/b13995/testprod.htm
    thanks,
    AMN

  • Deploy Browsable Infopath form from Development server to Production server

    Hi All,
    I have designed and published an 'Infopath 2010' browser enabled form 
    as site content type to a sub site names SITENEW.
    Form security level is 'Domain' level.
    The form contains following types of data connections and one SPD worklfow attached to form library..
    1. Send multiple Emails of current/active view
    2. Submit data to form library
    3. Get Details from SharePoint lists.
    4. WEB sercice calling GetUserProfileByAccountname ( Same site collection).
    Form library, lists in point number 3 are located in same site i.e SITENEW
    I need proper steps to deploy this to production sub site.
    Is  saving the 'SITENEW' as site template and upload to production  good idea?
    How should I take care of data conncetions?. Please advise.
    Thanks to all
    Murali Krishna Dittakavi *********************** If my answer/post resolved your query could you mark the post as answered. If it is helpful then vote as Helpful. Thanks

    hi All,
    Can any one help me for the following issue.
    Issue:-
    i am able to see the promoted column name "Test2" , but not able to see the data(Value) of the "Test2" in production server "TestFormLib" Library when i did second time promoted in second time imported subsite cmp.
    I have a issue with info path form  promotion fields in production server.
    Scenario:-
    I have a site ,ex:- http://host/sitecollection/subsite1 in dev. machine, the subsite1 have
    a form library "TestFormLib".
    published infopath form wtih some promotional fields (ex:- Test1) to "TestFormLib" library.
    i am able to see all promoted 'Test1' field data  in the library.
    taken  back up form the dev upto sitecollection and restored in the production.
    created subsite1 in prodiction server and taken subsite1 cmp from dev , imported into production server and published form which have promoted columns to "TestFormLib" library.
    able to see the promoted (Test1) field data in "TestFormLib" library in production subsite1.
     re-activated info path form to "TestFormLib" library in dev machine with additional (Test2) field promotion.
    i am able to see the "Test2" promotion field data(Value) in dev machine "TestFormLib" library.
    then , taken cmp for "SubSite1"  from the dev. machine, imported into production server on "SubSite1" .
    re-activated the latest form which is promoted "Test2" field to production server.
    i am able to see the promoted column name "Test2" , but not able to see the data(Value) of the "Test2" in production
    server "TestFormLib" Library.
    Any Suggestions to solve the above issue and i dont want to recreate the library in production . Because the data has been deleted.
    Help please..
    Thanks & Regards,
    Raghava Reddy S

  • Vendor master Creation in Development Server and Production Server - ASAP

    < MODERATOR:  Message locked.  Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. >
    Hello everyone,
    I just want to know that how to transfer the vendor accounts or vendor master data from dev client to Prod client?
    Vendor accounts are already in the dev client, created mannually, any one please guide me how  to transfer these vendor accounts in the prod server, without the USE OF LSMW.
    Please Reply ASAP
    Thanks
    M

    Hi
    Your understanding is correct.
    Development -
    > Quality
    Move TRs from Development to Quality till the time it is working as expected by business / comitted to business....
    Development -
    > Production
    Once the results in Quality (post UAT) are satisfactory, move the TRs from development to Production....
    Good Luck !!!!
    Kumarpal Jain.

  • Problems migrating application from development server to production server

    Well, we succesfully migrated shared library, application settings and BRs, BUT we couldnt migrate permissions and more than half of total forms, possibly because of lack of permissions, could you please point me to the direction of some manual about migrating, or just share an advice.
    Thanks in advance!

    Version - 11.1.2.0.83
    We did migration by LCM using this http://www.oracle.com/webfolder/technetwork/tutorials/obe/hyp/PLN11.1.2_LCM/index.html guide, Importing Planning Applications from the File System into the Destination Environment part

  • How to transport requests from development  to production server

    hi gurus
    i am new to SDN
    can u pls give me detailed information how to transport requests from development server to production server?if possible give me screen shot documents
    regards
    surya

    Hi
    Transporting
    There are help pages that discuss creation of transports.
    In simple terms, you: create a transport package
    add objects to the package  export the package, plus optionally any related objects to a predefined folder/directory on the portal server into a file with an extension of .EPA copy the .EPA file to the import folder of your QA system and import it  test the contents on the QA system  copy the .EPA file to the import folder of your production system and import it  Create a transport package file
    Here is the step by step procedure to create a transport package:
    For Export
    1. Go to system administration, and click on transport?export.
    2. In the middle pane, select the folder you want to export and right click on the Transport Package. 3. Fill in the General Properties i.e the name of the package, id and description. 4. And say finish and open the object for editing.
    5. When the object has been opened then right click on the object you want to transport, and say "Add object to the Transport Package".
    6. Check the checkbox of the item u have added and see the properties if it has been added properly. 7. Now click on the save button.
    8. After the object is saved, click on the export button. 9. U will have an option to select where to store the .epa file which will be generated. U can overwrite an existing one by selecting the browse button, or store it with the generated name in the location it automatically generates. 10. Now Click on the Start Export button.
    11. once the export is completed, it shows a report on how much time is taken to generate the .epa file. 12. Here there is an option for downloading the .epa file. Click on the link and download the file. This file is ready to be uploaded into any other EP Server.
    For Import:
    Pre-requisites: You have to copy the .epa file created while export into the local drive. Optionally, you have to manually copy the .epa file generated in the export function into the Import directory of the server ie. chooseFollow the steps below for importing a certain file. 1. Go to System Administration in the portal, and click on Transport?Import. 2. For the source of the package, Click on the radio button Server for the .epa file you have copied lately. Else, click on the radio button on client if you are operating in the client and select the .epa file you have stored on the local drive. 3. Now select the file from the browse option and click on Upload.
    4. Now click on the import button. 5. Once the import process is finished, the report is shown. In the whole process, the par files are not included in the .epa files. For the par files to be included into the .epa files then we have to change the pcdStartup.properties file in the server. The property to be changed is Pcd.TransportApplication.Export.ExcludeObjectTypesAfterRuleProcessing: Keep this property's value as empty for enabling the par files to be uploaded into the .epa. You can check for this property in the portal in the following -System Administration-Support-Portal Content Directory-PCD Configuration.

Maybe you are looking for