LSMW Update BUS2000125 closed

Hello,
we have an LSMW project which update object BUS2000125 (Tasks) via FB
CRMXIF_ORDER_SAVE.
Update only on the following fields:
description
activity reason code
Everything woks fine when the status of the activity is open.
When the status is closed, only the update on the reason code works
fine. Update on description doesn't work, I can't find any error log,
the idoc status is green (53) and everything looks fine.
Is there an possibility to update the description of an closed activity
via LSMW?
Can you help me?
Regards,
Eric Monteiro

Hi Jurgen;
Gotcha.  I actually want to update a customized field. The first item is updated successfully, but the other items, it seems they cannot recognize
So I recording again using different ways, below is a sample for a contract with 13 items.  How can I convert these X to a item number.
Any suggestion on that?
Thank you very much.
Janey

Similar Messages

  • Can iCal update while closed?

    OK, here's my problem: When I enter an event on my iPhone or iPad or on me.com, it only shows up in iCal after I open iCal. In other words, if I associate an alert with an event on my phone, that alert will never go off on my Mac, unless I left iCal open or I happen to open it sometime before the event.
    Now, I just spent some time on chat with Apple and was told that this is normal behavior, that iCal only updates from me.com when it's open. But Address Book updates just fine when closed. And I'm 99% sure that the me.com support guy was wrong, that iCal updates like Address Book. Or DID.
    Has the behavior changed? Have I lost my mind and iCal never, ever updates when closed?
    I'm willing to accept that I'm completely wrong about this, but I wanted to throw it out to the community and see if anyone else a) remembers the experience the way I do and/or b) knows of any workarounds/apps that will allow me to receive iCal alerts on my Mac without needing to leave iCal open all the time.
    Thanks!

    Under the old system, which used SyncServices as does Address Book, updates could take place even while iCal wasn't actually running.
    With the new MobileMe calendar, because iCal isn't really syncing but is reading the calendar off the MobileMe server (much the same as webmail) updates can only take place while iCal is actually running. This means that if you add an event with an alarm on another device while iCal is not running, the event won't be added until iCal is opened and may well be missed.
    In order to be sure you would need to run iCal but hide it, so that it won't be visible and in your way but can still update.

  • After installing Flash player updates, Recently Closed Windows in History menu lost

    Hi Friends,
    This is just an annoying problem, not really serious, I guess. Whenever I download and install Flash Player updates, History > Recently Closed Tabs, and History > Recently Closed Windows, are wiped out.
    This is a problem for me, because when I log on to my computer every morning, I use History > Restore Previous Session, to get back all the tabs I had open the night before. And often also Recently closed Windows, if I had a 2nd and/or 3rd Ff window open last night. After I install Flash Player, the previous session becomes the Adobe update site. I think I can avoid losing the previous session, by making sure I open my previous session before I start the download and installation.
    (I don't use fully automatic updates for Flash. I have the system alert me when it's ready, and then the next time I log on to the internet, the download popup window appears. I don't know why it waits until the next time I log on, instead of right after I click ok (and also ok on Spybot S&D and WinPatrol alerts). And I know you can't provide support for that part. But just to let you know all the relevant info :-) .)
    So normally, if I've done something to lose my previous session (with all my usual tabs) (usually when I'm in a hurry and don't notice that I've opened Ff without restoring previous session) I can still get that session because it shows up in Recently Closed Windows.
    But after I install the Flash update, Recently Closed Windows (and Recently closed Tabs) are both wiped out.
    I'm hoping someone can sort this out, and I can just change some setting somewhere, to prevent this. Or maybe like the previous session, and remembering to open it, before I start the dl, it might just be a matter or altering my habits. I can't think of any habit changing that would work though. So that's why I'm asking all you wise Ff users :-) Hopefully it's not a bug?
    Thank you very much for any insight, comments or suggestions :-D
    All best.

    hello, this problem happens since the adobe installer triggers the opening of a browser window once the update is finished, which then overwrites the last session...
    you could try if adding ''SilentAutoUpdateEnable=1'' to the adobe mms.cfg configuration file addresses that issue, as described here: http://helpx.adobe.com/flash-player/kb/administration-configure-auto-update-notification.html

  • Updating a closed workorder.

    Hi  Gurus,
    I hope I am not asking a very stupid question, but I am faced with a requirement to show Sales Grade in the IH08 which is populated in the system Conditons field in the Work order. The problem is that the sale grade can change even after the work order is closed and hence i wanted to ask if there is any way we can update a closed work order?
    The process is too complex and if I am able to just update the system conditions I can avoid changes to a number of programs and to IH08.
    Thanks in advance.
    Anoop

    Hi Pete,
    Thanks for the reply but do you think this can be automated using a bespoke program. The program would be triggered when ever a new Sale Grade is entered for the same equipment in the new work order. The program will do as you said and then close it again. is that possible?
    Regards
    Anoop

  • Thunderbird updated and closed all open tabs.

    I often keep an email tab open as a reminder until I act on it. Sometimes I will have 10 or so tabs open at the same time.
    Yesterday I left the house for several hours leaving my computer on. When I returned, both Thunderbird and Firefox were closed. They were open when I left.
    When I opened Thunderbird, all of my open tabs were closed. I have no idea what they were and I could find no list of Recently Closed Tabs so I could reopen them. I can only assume that an update occurred in my absence and that's what was responsible for closing Thunderbird.
    This used to happen with Firefox occasionally after an update but you seem to have fixed that. Please fix Thunderbird so that it never closes open tabs.
    Thanks,
    Bill

    Bottom line is tabs live in a file called session.json. All sorts of privacy and "speedup" type tools delete this cached information. One of the really popular ones is CCleaner. In the case of Firefox they have an additional backups they can restore from, but it is only a matter of time before these same tools. but in the case of Thunderbird functionality is somewhat reduced. Manly I think because no one at the time thought people would come to rely on tabs. In the underlying code tabs are messy and really large parts of the "vision" await further attention. Thunderbird in reality only has one and the rest is smoke and mirrors hence my particular issues re reliability long term. Compose in a tab may see more work done on the tab part of the interface to make it more robust.
    Having said that I have had issues with Firefox in the very recent past, but I also run nightly builds so expect issues most people never see. (Testing comes in many forms.)
    Making your own backup of the session.json file is a workaround if you feel strongly enough, but personally I think saved search folders and tags are a much improved arrangement as most IMAP servers support them so your tags appear on your other devices as well.
    My view is.
    Tag mail as say "To do"
    open find Ctrl+Shift+F
    set a search criteria for tags contain "to do" set the folder and sub folder to search
    click search to make sure your criteria is working and then click save as search folder.
    Thunderbird now has a new folder which only contains your "to do" tagged mails. Search folders are a vastly under utilises feature (probably because no one knows they exist) but they make a lot of business type functions much easier. (they are what underlies the "unified" folder view {View menu > folders > unified} a collection of search folders.

  • Hi i recently bought an ipad from a friend and when i plugged it in to do the update it closed out and now it wont reconize it and my ipad tells me to plug it into itunes but it wont help me please idk what to do"

    Hi i recently bought an ipad 1st gen from a friend i was playing it for awhie and decided to transfer my stuff onto it so i plugged into itunes did the update then it closed out and now my computer wont even reconize it and my ipad says to plug it into itunes like when you first buy them so i plugged it in but my computer wont reconize it and now i cant do anything on it

    The way you download older apps for the older, original iPad 1, as I understand it, is if you have iTunes installed on a computer, you purchase / download the new, current app, in the iOS App Store in iTunes on your computer. Then, go back to your iPad and go to the App Store app on your iPad and find the same app there and download it.
    When You select app to update/download, a message pop-up window appears asking if you want to download the last compatible version for your device (if one still exists ) tap OK and that should be it.

  • Actual end date is not update after closing a change

    Hi,
    We are using SCSM 2012, now I want to make report on which changes have been closed in the last month. In som way all the changes that have been closed in SCSM do not have an actual end date, all the changes that I have imported from our old tool does. It
    looks like SCSM does not update this field by itself, but I can't find a field in the change managment module in which I can provide the actual end date.
    How does SCSM 2012 copes with this?
    Kind regards, Marco Jansen

    Hi Greg,
    We are actually testing this now, as MS is not planning to solve this issue on a short term. The use of the last modified date is casuing u a lot of trouble now as we have had an change on our change form casuingthe last modified for all change to be set
    to the date of the change. That was the end of my closing data.
    We are now getting the WA in place from Netviaconsulting, but that is not a complete solution. Not all change reach a state of complete before they are closed. Sometime you will close a change that is cancelled ,rejected or failed. this means that when
    triggering on an update of the record every update will set the actual enddate. Besides when setting the actual enddate on the status closed, the date is update every time the worflow runs.
    We just want the actual enddate to be filled  when a change comes to the status closed from any other status, but this sets the actual enddate on every status change of the change. in some strange way ewe cannot figure this out.
    If anybody has the correct configuration for this workflow it would be very useful. Most prefereably MicroSoft in this case.

  • LSMW update vendor account just if the actual (old) is in the txt file

    I want to update the vendor account but just if it is the same I have in the txt file.
    My txt file is the fllowing for example:
    Vendor - Old Account - New Account
    A2
    A123
    A321
    A1
    A133
    B321
    A3
    A144
    C321
    So, for each vendor if the actual bank account number is (old account in the file) replace the actual (old account) with the new account.
    In the CODE text for LSMW (check my attach) I have this:
    IF FK02A-BANKN_01 = CTAS-BANKN. FK02A-BANKN_01 = CTAS-BANKNNUEVO. ENDIF.
    Where:
    FK02A-BANKN_01 is the FK02 text for vendor account
    CTAS-BANKN is in my file and structure defined the OLD ACCOUNT
    CTAS-BANKNUEVO in my file and structure defined the NEW ACCOUNT (the one should be now)
    But it is not replacing, if i check converted data, this field is empty. So the if is not working. Ideas?
    I changed it by
    FK02A-BANKN_01 = CTAS-BANKN
    or
    FK02A-BANKN_01 = CTAS-BANKNNUEVO
    and it works, but put the old or the new code of course, not doing the comparation with the old and replacing with the new.

    exact, similar to what I showed and described in my blog LSMW Long text load by Direct Input method
    and you must not forget that the account in the database is stored with leading zeros in case of numeric account and less than 10 long, so there is another potential risk that it wont match without doing an extra conversion of your source field content.

  • LSMW Update Process with IDoc

    Hi Experts,
      We have an LSMW project to upload to create new activity in the CRM server and it has been working fine. Now we want to modify the project so that the existing data gets "updated" instead of creating a new activity.
    My question is..
    Is it possible to make data "updates" using LSMW.
    I tried adding more fields in  the existing project and now i get this error when i try to update. "Activity already exists in the system"
    I'd really appreciate your help and inputs.
    Thanks in advance
    Mani

    Hi Mani,
    I have gone through your query.
    When you use LSMW Idoc method to create the Activity with in the CRM system, you can definitely use the same project to update the Activity details as well. Follow the simple rules below.
    1. With the Basic type you have used to create Activity, in the rules for the segments change the task to Update.
    2. With this change done, for the segments you need to update the data, change and save them.
    3. After all these you can create and process the Idocs so that the activity details are updated.
    LSMW can be used to create, update and make changes with in permissible business objects. So definitely this update can be done. I hope this helps.
    Regards,
    Venkat

  • Airport 7.4.1 Update and closed networks

    I updated my Airport Extreme and Express with the new firmware (7.4.1), both Purchased Dec 2008. After the Express udpated, it didn't show up in Airport Utility. I reset the Express and it showed up, but I had to redo the settings, when I did it didn't show up again. So I plugged an Ethernet cable into the Express and it I could see it in the Airport Utility. The Utility app said the express could not find a wireless network. My network is closed (hidden) and this seems to be a problem with the 7.4.1 update. When I opened the network, the Express worked fine. I'm using WPA2 Personal encryption.
    --Scott

    guys, I had this problem and have logged an issue on this forum for a similar (exact?) issue of a *TC in bridge mode* on a 5GHz hidden (closed) network that *would not connect after V7.4.1 update.*
    HOWEVER after speculating a DEFECT in the V7.4.1 formware that after sometime (an hour???+) the TC doe sfinally hidden network @ 5G and iraculously comes online and connects. I have made a mistake in thinking this is a defect.
    so I think I might propose _firing up V7.4.1 firmware back on your TC_ and go visit some mates for a while and it is likley to be back on.
    I recycled the TC (just did this again) and waited 10mins and yes it was back online!. Slack latency however it is back with V7.4.1
    In anycase backing off to that flaky V7.3.2 is probabaly not a good way to go. V7.3.2 seemed vary unstable and had at least an issue of not corrcetly port forwarding port 21 (FTP control).
    just a suggestion.
    hth
    w

  • LSMW updated other fields too

    Hi Experts,
    I am trying to update NAME3 field in the customer master using LSMW but out of 100 records of customers, for the 2 customers it modified other fields too on the address tab. Any comment?
    Thank you,
    Neha

    It might have updated these fields in all 100 records. But the values might be same before and after for 98 records. You can verify this from CDPOS table.
    The reason of updating unwanted fields might be the the Recording. During this after Default All click, we need to delete all unwanted field from the screen.
    A possibility of this reason in your case too, once encountered by me.
    Jogeswara Rao K

  • LSMW updating problem with direct input method

    Hi!
    Using version 4.0.0 of the LSM Workbench from 2001-07-01 on SAP R/3 4.7, I need to update the purchase order text and wanted to use the direct input method.  I found a tutorial on SAPTechnical which I followed.  All went well, the input data was converted and at last I got the message:
    "Long Texts in Total : 2
    Successfully Transferred Long Texts : 2
    Non-Transferred Long Texts : 0"
    My trials are recorded in table STXH with date and time and also in the material master change history.  However, the result in the material master is that the purchase order text is NOT updated.
    Can anyone tell me why this might be?

    Hi Santosh!
    First of all, thank you very much for posting an answer.  But unfortunately it was of no help.  I want to update the purchase order text on a material that already has the purchasing and purchase order text views. When I compare the PO text before and after my "Successfuly Transferred Long Texts" there is no change.  I hope that this make it more clear but it is still a mystery to me.

  • LSMW - Update  Material master

    Hi ,
         WHILE UPDATING THE EXISTING VIEW WITH NEW FIELDS IN MM02,i am passing the values only for the updated fields, at that time it is updating the existing values as blank values.
        And while adding the new views in the MM01 it is updating the values in the MARA MARC tables but those views i have added are not diplaing in the MM03 Tcode while in disply mode.
       Can any body please give the solution for this...
    Regards,
    Rajesh.

    Hi,
    are you checking the material exists or not in the BEGIN_OF_RECORD of field mappings ?
    4-character transaction
    SELECT SINGLE MATNR
                  INTO V_MATNR
                 FROM MARA
                   WHERE MATNR = MATMAS_MRPVIEW-MATNR
    IF SY-SUBRC = 0.
      BMM00-TCODE = 'MM01'.
    ELSE.
      BMM00-TCODE = 'MM02'.
    ENDIF.
    i believe  you given it already. but check it again.
    regards
    srikanth

  • LSMW updation Issue

    Hi All,
    The LSMW that loads the material master in ECC 6.0  is no longer loading the profit center field for the Material that is extended completely,but  for New materials the profit center field is successfully uploaded .Pls help me resolve this issue.
    Any OSS note for this Resolve it.
    Thanks
    Sanjit

    Hi,
    Please search in SCN and please refer to this link
    Re: Lsmw: NMI process is no longer loading the profit center field after upgrade

  • Add-on update pages closed but will reload again on next FF start.

    http://findicons.com/ietab?v=1.2.0.13
    http://www.the-converter.co/whatsnew/n/?ver=1.1.1&fver=1.0.0&pver=1.0.9
    http://noscript.net/?ver=2.1.7&prev=2.1.4
    these pages will not go away after deletion. Next FF start, they are back again. I can't get rid of them and have tried all suggestions.

    If you have increased the minimum font size then try the default setting "none" in case the current setting is causing problems.
    *Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
    Make sure that you allow websites to choose their fonts.
    *Tools > Options > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"
    It is better not to increase the minimum font size, but use an extension to set the default page zoom to prevent issues with text not being displayed properly.
    You can use an extension to set a default font size and page zoom on web pages.
    *Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
    *NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

Maybe you are looking for