LSMW using IDoc Method *Error :No partner exists with the name '', type ''*

Hi All,
I am a newbie. I am trying LSMW using IDoc Method.
I got an error when i executed Start IDoc Generation step: No partner exists with the name '', type ''
Could anyone tell what wrong I might have done,
Thank you,
Shiv Ram

Hi,
You have to setup your IDoc configuration in LSMW:
1) Enter the menu \Settings\IDoc Inbound Processing
2) Create a FILE port by clicking "Maintain Ports"
3) Create a logical system (LS) partner number by clicking "Maintain Partner Numbers"
4) Be sure your partner profile that you create is "Active" by clicking "Classification"
5) In the end click "Activate IDoc Inbound Processing" bottom.
Run your LSMW again. This time it shoud run wothout any problem.
Hope it helps.
Chang

Similar Messages

  • Runtime Error - No Component Exist with the name "FLAG"

    This is an issue I am having from chapter 5 exercise 2 from the ABAP Basics book.
    Moderator message - Welcome to SCN.
    Please note that there is a 2,500 character limit to posts in the forums. Please post only the relavant portions of your code..
    Also, Please read Please read "The Forum Rules of Engagement" before posting!  HOT NEWS!! and How to post code in SCN, and some things NOT to do... and [Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers] before posting again.
    Rob
    Edited by: Rob Burbank on Jun 16, 2010 3:12 PM

    Declare variable flag in the top include

  • Requesting all to help me how to create lsmw using idoc method

    hi
    thanx for ur answer
    requesting every body in the forum to help me how to create lsmw using idoc method.
    regards,
    balaji

    Hi Balaji,
    LSMW using IDOC is similar to using flat file method. Here you are getting data from IDOC container and mapping data with Idoc segments insted of flatfile column.
    Hope this is what you are looking for. If helpful then don’t forget to reward me for that
    Darshan

  • Working on LSMW using IDoc method for processing Open Sales Orders

    We are currently in middle of creation of a new instance of production for a different Business SBU. We are looking to utilise the LSMW tool using IDocs for uploading / transferring the open orders to the new box. If some one has worked on LSMW using IDocs, please get in touch and if you could share any documents on the process of utilising the LSMW tool using Idocs for any kind of conversions, it would be great. The following is a sample case.
    1. Each order will have multiple segments with different qualifiers under various segments.
    2. Multiple line items would be available under each order.
    Issues we are currently looking to solve :
    1. How do you manage to loop through the qualifiers during processing for the same segment.
    2. How do you prepare the tool to recognise the multiple line items of the same order.
    3. What kind of strategy needs to be used to create the input data file(s). Like, splitting the header and detail level information ?
    Note  : The volume of data we are looking at is somewhere around 40-60 thousand orders worldwide.
    Thanks in Advance.

    hI vikram check this link
    and reward points if helpful
    http://www.****************/Tutorials/LSMW/IDocMethod/IDocMethod1.htm
    http://www.jt77.com/system-dynamics/model-01395.html

  • LSMW using IDOC method for scheduling agreement - MM

    I am using LSMW IDOC method to create Scheduling agreement. i am using message type : PURSAG_CREATE. I have completed the field mapping and when i tried to process the idoc i am getting the following error.
    No instance of object type PurchSchedAgreement has been created. External reference: # 1
    There are no clue why this error is popping up.
    please let me know if anyone faced similar issues.

    try entering the values in WE19 and do the posting for teting purpose, make sure you are passing all the values.

  • LSMW using IDOC method for scheduling agreement

    I am using LSMW IDOC method to create Scheduling agreement. i am using message type : PURSAG_CREATE. I have completed the field mapping and when i tried to process the idoc i am getting the following error.
    No instance of object type PurchSchedAgreement has been created. External reference: # 1
    There are no clue why this error is popping up.
    please let me know if anyone faced similar issues.

    Are you using external number range for scheduling agreement, then you have to pass the SA number too if not then check with your MM functional consultant to change the number range from external to internal provided it is agreed by your customer

  • Data Migration-LSMW using IDoc Method

    Hi Friends,
    I have contract relevant information in the form of a excel spreadsheet/tab delimited flat file.
    This transactional data has information such as Header Data, Item Data and Sub Item data (BOM explosion).
    I need to migrate this data from the flat file to the CRM application using the IDoc Method of LSMW.
    /When I used the Batch Input Recording method, the item data was not captured during recording./
    Kindly send me relevant information to [email protected]
    Thanks in Anticipation
    rgards,
    Praveen

    Hello Sven,
    thanks for your comment. Unfortunatelly those both transactions do not exitst because I work on SAP CRM 7.0 instead of SAP ECC. I also looked for similar transactions in the table but didn't find anything.

  • LSMW using IDOC method

    Hi
    I am working on LSMW-IDOC . I am very new to this .
    I am trying to upload open purchase order throgh LSMW IDOC.
    Can anyone send me the steps for the LSMW-IDOC method.
    I wanted to pass header , item position & delivery schedule & item category data.
    How to pass header , item, delivery data. is it pass in different file or it can pass in one file.
    As whatever sample file I got It is only one excel file consist of all data.
    Plz. help me & guide me .
    This is urgent.

    hI vikram check this link
    and reward points if helpful
    http://www.****************/Tutorials/LSMW/IDocMethod/IDocMethod1.htm
    http://www.jt77.com/system-dynamics/model-01395.html

  • Master data upload via LSMW using IDoc method

    Dear all,
    I know this has been a topic of many discussions but I would like to ask you is to share your thoughts and possibly experience with the following scenario:
    Interface between non-SAP system and SAP system has to be built whereby master data gets created in the non-SAP system and has to be uploaded into SAP. This is a process that needs to be performed on a constant basis and hence my question: is there a way that the MD upload takes place in the background via LSMW with IDoc? Or any other way, for instance, with a flat file, etc.?
    Thank you very much for your input!
    Regards,
    Miro

    Miro - It depends upon many factors
    1. Number of source systems
    2. Volumn of recorsds ( Data to be loaded)
    3. Transformation needed or not needed from S to D ( source to destination), We may consider it as
        business rules/mapping
    Based on above you may segrigate the objects related to data, eventually you can shoose approach of loading in SAP,
    As if straigt forward load for some 20k-30K records ( Just a file load on regular basis), one to one mapping then go for LSMW, if some complex transformation logic needed then go SAP data services implementation. best part here is if you multiple sources that can be handeled here.
    Accordingly you can proceed ...
    Hope it helps.
    Best !
    Deep

  • No Component exists with the name /bic/zplant2

    Hi,
    i am getting the error for this abap code
    this code is written in Start routine in BW.
    but it is giving error while running or checking the program..
    the same start routine works fine in Production, but it gives error in Quality.
    r_plant    like /BI0/MPLANT-/BIC/ZPLANT2,
    WHAT IS WRONG HERE ???

    the info object ZPLANT1,ZPLANT2 exists and is active in both quality and production.
    but there is no data in master data tables for zplant1,2 in production/quality.
    the requirement was to fill up the  Key and text values into custom info objects
    FOR e.g.
    there exists hierarchy on 0plant
    0plant has 2 sub nodes ...east and west
    east has 3 subnodes east1,2,3
    west has 4 sub nodes west1,2,3,4
    now zplant1 should show east and west, key and text
    zplant2 should show east1,east2,east3,west1,west2,west3,west4
    so there was code written by previous Consultant who left company.
    now the value doesnot populate in info objects zplant1 and zplant2 correctly
    so i found it gives error in Development environment.
    code exists in production and quality but no effect as those objects has no values in production and quality.
    Basically , 0plant is attribute of 0MAT_PLANT and exists in transfer rules &  update rules.
    and i am trying to fill up the hierarchy off of 0plant nodes into Zobjects

  • Steps to migrate lsmw using Idocs

    hello i need to migrate lsmw using idocs ?can anybody please tell me the ateps in idoc method
    It's very urgent , help  plz.
    Thanks in Advance
    jdkumar

    goto--> lsmw.
    settings--->idoc inbound processing
    here enter file port, trfc port, partner name.
    then follow below steps(as suggested above by a frnd)
    Project : 060_BUS_TRANS
    Subproject : SERVICE_TICKET
    Object : SRV_TICKET_ZSVT
    click on the execute button .you will reach the screen :
    The screen shows the 15 steps to Run the lsmw
    Step 2) select the first step ( Maintain object attributes) and click the execute button.After clicking on the execute button you will reach at. the screen
    Here you have to specify ( Message type and basic type)
    click on the BACK button
    Step 3) select the 2nd step ( Maintain source structures) and click the execute button
    Here you have to specify the source structures.
    Step 4) Select the 3rd step ( Maintain source fields) and click on the execute button :
    Here you have to specify the fields present in the source structure
    Step 5) select the 4th step ( Maintain structure relationship ) and click on the execute button :
    Here you have to specify relationship between source and target structures
    Step 6) select the 5th step ( Maintain field mapping ) and click on the exécute button :
    Here you have to map the fields between source and target structure. Also you have to apply conversion rules here if any
    STEP 7) select the 6th step and click on the exécute button
    Here you can define any fixed value or user define routines
    Step 8) select the 7th step ( Specify files) and click on the exécute button :
    At This screen we have to specify the files for This we should be in change mode .So please click on the button shown in the above screen. After clicking on This button you will be in change mode and will be able to specify the files :
    Step 9) select the 8th step ( Assign files) and click on the exécute button
    For assigning files yoy should be in change mode do the same thing click on the button as shown in the above screen :
    Then assign the files to different structures.
    Step 10 ) select the 9th step ( Read Data) and click on the exécute button :
    After clicking on the exécute button you will reach to the screen
    Again click on the exécute button . After clicking on the exécute button you will reach to the next screen
    Here you will see data is read.
    Step 11) select the 10th step ( Display read data) and click on the exécute button :
    Here you can see your test data present in test files assign to source sturcture
    Step 12 ) select the 11th step ( Convert data) and click on the exécute button :
    After clicking on the exécute button you will reach to the screen
    Click on the exécute button as shown on the : After click on the exécute button you will reach to the next screen
    Data is converted
    Step 12th ( Display converted data is same as Display read data )
    Step 13 ) select the 13th step ( Start idoc generation) and click on the exécute
    button :
    At this step Idoc is generated using converted data
    Step 14) select the 14th step ( Start idoc processing ) and click on the exécute button :
    After clicking on the exécute button you will reach to the screen :
    And then click on the exécute button : After clicking on the exécute button you will reach to the final processive screen
    If data is processed correctly you will see ( 53 Status message with green sign

  • Create an object with the name passed in as a string argument to a method

    Hi,
    I am sorry if it's too trivial for this forum , but I am stuck with the following requirements.
    I have a method
    void abc(String object_name, String key, String value)
    method abc should first check if there exists in memory a hashmap object with the name passed in as argument object_name.
    If yes ..just put the key and value there.
    if not , then create the hashmap object called <object_name> and insert the key/value there.
    Can anybody help me in the first step i.e, how to check if an object exists with the name passed in and if not then create it.
    Will getInstance method be of any help?
    Thanks in advance for your response.
    -Sub-java

    Dear Cotton.m,
    Thanks for your suggesstion. I will remember that.
    But somehow I have a strong belief that you still need to consult dictionary for exact meaning of the words like "upset" , "frustration" etc. Not knowing something in a language , that too as a beginner, does not yield frustration, but increases curiosity. And people like petes1234 are there to diminish that appetite.
    To clarify above, let me compare jverd's reply to my doubt with petes1234's.
    jverd said it cannot be done and suggested a work around (It was perfect and worked for me) While petes1234 , having no work in hand probably, started analysis of newbies mistakes.
    jverd solved my problem by saying that it cannot be done. petes1234 acted as a worthless critic in my opinion and now joined cotton.m.
    Finally, this is a java forum and I do not want to discuss human characteristics here for sure.
    My apologies if I had a wrong concept or if I chose a wrong forum to ask, where people like petes1234 or Cotton.m show their geekdom by pointing out "shortfalls" rather than clearing that by perfect examples and words.
    Again take it easy and Cotton.m , please do not use this forum to figure out others' frustration but be a little more focussed on solving others "Java related" problems :)
    -Sub-java

  • How to resolve error while importing data using IDoc method in LSMW ?

    Hi
    I am trying to import my data using IDoc method in LSMW.
    But after completing the whole LSMW process, when I look into the IDOC generated, the error description is as this.
    It talks about the process code and other stuff.
    Function module not allowed : APPL_IDOC_INPUTI
    Message No. B1252
    Diagnosis :
    The function module APPL_IDOC_INPUTI and the application object type which were determined are not valid for this IDoc.
    I am not able to resolve the problem.
    Please help.
    Regards,
    Rachesh Nambiar

    check the below link.
    /people/stephen.johannes/blog/2005/08/18/external-data-loads-for-crm-40-using-xif-adapter

  • Partner profile in lsmw using idocs

    Hii!
    I have a requirement where i need to convert article master in SAP Retail. I am using LSMW using IDOC. I have followed all the steps of configuration like created a partner profile, a message type(zmsg_type), processcode etc.
    However in LSMW Step: Start Idoc Generation , i get the foll. error:
    <b>Create a partner profile for message type zmsg_type.</b>
    Please help me with this.
    Thanks.

    Go to WE20 and then take your partner profile type from the left hand side and check you have assinged the message type in outbound or inbound parameter(in the right hand side).. if you have not then you will get this error.
    Award if usefule
    Prince

  • Creating a BP in CRM through LSMW using IDOC

    I am trying to create a buss partner in crm through LSMW using IDOC:
    Message Type:  CRMXIF_PARTNER_SAVE_M
    Basic Type:       CRMXIF_PARTNER_SAVE_M02
    I get an error: "No update is defined for BP role 000000".
    I am also filling
    IDENTIFICATIONCATEGORY: CRM001
    IDENTIFICATIONNUMBER:     12345678
    However i get this error only if the external ID does not exist in table BUT0ID.
    otherwise if the external ID is present in table BUT0ID and the object task is "U"pdate, the BP is saved.
    Has anybody worked on BP creation using IDOCs? If yes please guide me.

    Hi,
    This Check Box is required for Archiving Business Partners from the System. You can have a full idea about the same from the link below [Archiving Business Partners|http://help.sap.com/saphelp_crm60/helpdata/en/52/cff837a9aae651e10000009b38f8cf/frameset.htm]
    Also have a look at the following [Introduction to Data Archiving (CA-ARC)|http://help.sap.com/saphelp_crm60/helpdata/en/8d/3e4c11462a11d189000000e8323d3a/frameset.htm]
    Hope this helps.
    Thanks,
    Samantak.

Maybe you are looking for

  • I need to move my files from my imac to the cloud to free up my hard drive?

    I have 1gb ram 320gb hard drive thats full what is the easiest way for a person to move files i.e. music, pics ...... to free up my hard drive and possible to expand the ram to 2gb? I'am a novice at computers but want to learn.

  • How to update Adobe InDesign while being offline ?

    hello again.... actually I know to update it, and I already downloaded the specified patch files required, but when ever I try to run the updater I get a message telling me (  " welcome,. there is a new patch available for your software, click next t

  • Is it possible to create a list of the contents of a portfolio

    I have the need to create a number of portfolios with different files based on the need of the individual in the organization and subject to document control procedures. As part of the document control procedure, I have to identify what versions of w

  • Conversion XML-Text atom

    Hi all I have developed a scenario step which reads txt files from a directory and generates journal vouchers based on the data in the files. This is made using the file inbound and specifying a control document for mapping values in the file to xml.

  • Merge.. When Matched... Query... please help...!!

    Hello Friends - With following details, can some one help me in writing a MERGE query, when Matched update ArtsDate and when not Matched Insert new rwo in CE Table. PT: Parameter Table MSO 1 2 5 6 FO Table           MSO     EngModel      1     RM713