Lst of all sap standard function modules???
can anyone provide with a list of all sap standard function modules??? I am currently working in Product costing.As per my Functional specification i need to find the number of cost centers in a cost center group.we guess that this information will be available from a function modules.so can anyone provide all the function modules of sap.
Hi,
Check this link :
<a href="http://www.erpgenie.com/abap/functions.htm">http://www.erpgenie.com/abap/functions.htm</a>
-SatyaPriya
Similar Messages
-
Where-Used List: Modifying SAP standard function module
Hi,
We have decided to modify SAP standard function module SD_SCHEDULING. But before that, we need to understand what impact this modification will have in the system. We will also estimate the risks with this modification.
Therefore, I have taken Where-Used List for this function module. We are aware that this list is not comprehensive.
Do you know any other way we could use to understand better what impacts this kind of modification may have? My colleagues say that this is the only way.
Thanks in advance for your help.
Regards,
Jarmo TuominenHi Jarmo,
Try this
1). Goto Se16 and check the contents of table 'CROSS'.
2). Enter 'F' in the first selection screen field
3). In the NAME field enter the Function module SD_SCHEDULING and execute.
4). The list will give you where all the FM has been used.
Kindly note this is almost the same as doing a where used list. The where used list will only work correctly if the 'Update Navigation Index' works correctly in your system. So just to ensure the result of your where used list you can follow the above steps. This does not require the Update Navigation Index.
Hope this helps
Cheers
VJ -
Error in the SAP standard function module 'RSDRI_INFOPROV_READ'.
Hello Experts,
We upgraded from 3.5 to 7,0 support pack 17 .
After upgrade we are getting error
with return code 11 'Others´'.
While debugging the standard function module we found that the standard method s_r_infoprov->read is being executed with the return code = 8 (inherited_error).
Any suggestions?
Regards,
VivekNot sure if the parameters provided were correct,you may wish to do a sanity check
Input Parameters:
1. I_INFOPROV - This will hold the Name of the Info Cube from where we need the pull the data.
2. I_T_SFC - This parameter is in the format of Internal Table which holds the Character Info Objects we need to pull from the Source Cube.
3. I_T_SFK - This parameter is also in the format of Internal Table which holds the Key Figure Info Objects which we need to pull from the Source Cube.
4. I_T_RANGE - This is also in the format of Internal Table which holds the Selection criteria for which we need to pull from the Source Cube u2013 For example the Company Code u2013 001 and Fiscal Year Period u2013 001/2006.
5. I_T_REQUID u2013 Selection of cube data based on Request Id.
6. I_SAVE_IN_TABLE u2013 In case you need to save the data in DB table
7. I_REFERENCE_DATE u2013 This holds the current date.
8. I_AUTHORITY_CHECK u2013 This will hold the value u2018Ru2019, which is meant for READ.
9. I_DEBUG u2013 This is for Debugging mode and holds the default value u2018Yu2019.
Output Parameters:
1. E_T_DATA u2013 This Output Parameter is of internal table format, in which we can mention the output fields (For all the fields mentioned in the Input Parameter, this output parameter will hold the values).
2. E_END_OF_DATA u2013 Once the FM is executed successfully, this output parameter will hold the value u2018Xu2019, means extraction completed successfully.
Hope it Helps
Chetan
@CP.. -
Notes - Standard Function Modules long text functionality
Hi All
Need standard Function Modules for Notes (long text) functionality. I need to create a notes tab in dialog program, this notes tab has all formatting icons to enable create/upload/modify the text entered and passed to SAP standard text objects.
Edited by: sharmalvn on Jun 29, 2009 4:34 PMTake a look at function modules:
- SAVE_TEXT (saves text to an existing object)
- READ_TEXT (read text from an existing object)
- CREATE_TEXT (writes text to a new object)
Hope that helps,
Michael -
Transaction Code to list all standard function modules available in SAP
Is there any transaction code to list all standard function modules with their
grouping.......like in transaction BAPI all bapis are listed w.r.t. their
functionalities....Then Try SE84 -> Program Library -> Function modules. Execute to list all FMs.
By the way may we ask the purpose for it, as my ECC 6.0 system has exactly 3,78,979 FM's.
Otherwise if this is an interview question, press the abuse button ( a small yellow traingle at the right of your message subject line ), and in the coming page enter "Interview question" and press Report Abuse.
Hope i have cleared your query.
Regards
Karthik D -
SAP Upgrade - Standard function modules & modifications
Hello everybody,
we are doing a SAP Upgrade to SAP ERP 6.0 and I need your help
Some SAP standard funcion modules were modified in the last years and some weeks ago the changes were undone. The last version of the function modules are the same than the original function modules, but the version manager shows that the last version belongs to the user FGZ583 (and not SAP).
The Problem is, that SAP deals with that function modules as a modification (because the last change was done by FGZ583?), but they are identical to the original SAP function modules.
When the Upgrade is done, the SPAU/SPDD/se95 show that function modules as "modifications", although they are the same that the original ones.
What could I do to avoid that SAP deals with that function modules as modifications?
Cheers
PrashadHello Prashad,
Its standard that once the object is changed the corresponding entry is recorded in different tables.Even if you roll back now system will treat as the modifications because corresponding change entries are present in the tables. You can try to activate the older versions but i don't think this will help you.
This is not a point of worry as in SPDD adn SPAU you can choose reset to original for all those objects.
Even if you can get those objects to move back to the source version they will get back to the standard in the new release.So my advise will be to let your upgrade run and then reset these objects to original.
Regards
Niraj -
Is there standard function module to read "open office" in SAP
Hi All,
Is there any standard function module to read open office document from SAP.
Please confirm.
Thanks and best regards
Rajeev ChhabraHi all!
I have a similar problem. I need create a formatted spread sheet managed open office. The work sheet must be formatted.
I do not find the function module for doing this.
Do yo have any idea? The only thing I have found is the functionallity included in program BCALV_TEST_GRID.
Also I will need a function to upload the file to fill a table control.
Thanks in advance.
Cristina. -
BDC program or standard function module to change data in PFCG TCode.
Gurus,
I have programatically change the validity date of SAP security role (TCode PFCG). Are there any standard function module available for this ? If not then does PFCG supports update vida BDC programming ?
Regards,
Rajesh.Cross-posting. Thread locked.
Please read [the rules|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement].
PS: Please clean up / follow up on all your hundreds of unresolved questions. -
Is it necessary to use the standard function modules always?
Hi All,
Suppose i can retrieve the BUSINEES PARTNER ID from the table BUT000 with the help of 'BP_GUID' field through a select query statement.
Now is it necessary to use a standard function module to retrieve the same data. what about the performance? which is the better solution. to implement our own code or to use the function module available.
Please someone clarify me about this issue.
Regards,
Sharry.If you'd ask the question in general it's obvious that there is no good answer as it always would depend on the circumstance. However, as you've posted your question in the performance tuning forum, let's look at your question in this context first. I think it's fairly safe to say, that in almost 100% of the cases a standard function module will not be as fast as any well implemented and custom tailored code. If in doubt, just try reading the code of the function module you want to read; most likely you will find lots of unnecessary fluff in there, often they read data that you don't even need.
And as far as buffering is concerned, that can also be an issue. E.g. let's say you do a massive read of distinct business partners and you only need the data once for each partner. Obviously buffering is silly in this case and it might even slow down your program, because the implemented buffering is not necessarily well implemented. I've come across a few cases, where the buffer tables where standard tables with no efficient read access (so no sorted table or hash table) and once tons of data were buffered, it actually took a moment to look up if the record already was buffered (just to find it wasn't there yet).
Now most of the times this slowdown is not an issue as the lookup is still fast compared to the (usually) prevalent database accesses with their slower IO timing. But another factor to consider is memory consumption and why buffer data in memory (and waste it), if you can't use the buffer anyway? So when I do use standard function modules, I usually try to see what they retain in global memory, to better understand if I need to call some initialization/clearing/refresh function...
Note also that often you need to process lots of data, but don't find a standard function module for "mass access", so you need to read your object one by one. Obviously that's another good candidate for implementing your own queries, where you can process the data in packages.
So what might be the reason to use a standard function module? Well, often it's required because the logic is so complex that it would take you too much time to implement it (not to mention that we often simply don't know all the logic that's coded in there). Another advantage is that you might get independent of the data model. E.g. for IDoc interfaces SAP switched in some release the tables where the data is stored. So if you had coded your own queries to get IDoc data, they wouldn't have worked after this particular release upgrade. The standard function on the other hand, checks both the old and new tables, so by using it you would have been fine.
The one major caveat I'd give though is to always check whether the function module is released or at least documented to some degree. I.e. if it's not released, SAP won't support it and does not guarantee that the interface or logic stays the same. In my experience lots of functions I do want to use are not released (or documented), but I will still use them because they seem to be the best alternative in certain scenarios.
Cheers, harald -
List of Standard Function Modules.
Hi All,
Where can I find a complete list of STANDARD FUNCTION MODULES called correspoinding to STANDARD PAR FILE's in Enterprise Portal 7 (2004s). For Example what is the Function Module called when I click on ESS-> Career -> Language Skills.
Regards
SaurabhHello Sourabh,
I hope this link wolud help u
http://help.sap.com/saphelp_nw2004s/helpdata/en/dc/6b839a43d711d1893e0000e8323c4f/frameset.htm
Reply me if you still need more Info
award suitable points
Cheers,
C -
Copying Enchancement spots from standard function module to Z fun module
Hi All,
I copied standard function module SD_BACKORDER_LIST to my Z function module . But i am unable to copy the enchancement spots available in the standard function module . please give me the suggestion to copy this to my Z function module .
Regards
R.VijayakumarHi Martin,
A SAP note will soon be released about this (compatible back to 6.40)
There is a light version available in 7.3 to transfer data between PFCG and ST01.
There is an optional Rolls-Royce version available for Z-codes / functions and the import parameter specific checks. The trick is to keep the original context of the call and maintain the proposals to the RFC enabled entry point, and know whether the tcode triggered it or the external caller.
There is a service delivered which is context sensitive (e.g. the message type of the IDOC determines the application authorizations needed for synchronous processing, so SAP cannot deliver SU24 reliable proposals and the ones they tried for the /SDF/ are very isolated..).
You need a "common functions" role for the basic scenarios like you have for interactive SAPGUI end-users, and then you need a runtime analyzer to perfect SU24 context sensitively. You also need to distinguish between a local BAPI (context is tcode) and remote one (context is RFC protocol, or http protocol... etc)
That comes with the SAP Note... (it is not released yet. I will update this with the number in the next weeks.)
--> Just a little heads-up and insight that there is some light at the end of the tunnel and you can even order it as a service from SAP to fix your Z-problems for you. The question happened to match that which I know SAP is working on.
Cheers,
Julius
Disclaimer : I have done many such spagetti fixes in the wild and developed the tool and services for customer scenarios together with SAP from my experiences, it is one of my favourite topics --> the Rolls-Royce version with Z-functions, hard-wired external RFC clients and configuration scenario dependent checks includes consulting fees if you want SAP to secure your own scenarios for you. The tools help this, but you cannot fully automate or propose it fro SU24 in "factory settings". -
Standard function module for checking the sales organization and plant
Hi all,
Does have standard function module for checking the relationship between sales organization and plant?
Thanks a lot!
Ninahi
good
check these BAPIS
BAPI_SALESGROUP_GET_DETAIL Sales Group: Display Name
BAPI_SALESOFFICE_GET_DETAIL Sales Office: Display Name
BAPI_SALESOFFICE_GRP_EXIST Sales Office / Sales Group: Existence Check
BAPI_SALESORG_EXIST Sales Organization: Existence Check
BAPI_SALESORG_GET_DETAIL Sales Organization: Display Data
BAPI_SALESORG_OFFICE_EXIST Sales Organization / Sales Office: Existence Check
PLANT=>
BAPI_PROMO_GETSITEPLANNING Detailed Data for the Plants Involved in a Promotion
thanks
mrutyun^ -
Need to know the standard function module/program in E recruitment
Hi All,
I need to know the standard function module/programm that defaults the 'Functional area' field in the posting page from the requisition page.
Early responce is greatly appreciated.
Thanks and best regards
RajeevHi Masa,
Thanks for your reply.
We are using Assets with the integration of Project systems. We are now in 4.6C R/3 & SRM 5.0 system. And now R/3 upgrade and SRM upgrade going on smultaniously to ECC6.0 and SRM 7.0 respectively.
I would like to know any new functionality available in the latest upgrades and we have done lot of customization for Asset Procurement. And would like to go with Vanilla.
Can you please provide me some inputs about the Project (WBS element ) based Asset Procurement in SRM as standard.
Thanks and Regards,
Ramesh -
Need to know the standard function module in E-Recruitment
Hi All,
I need to know the standard function module that defaults the value of 'Functional area' in 'Posting' from 'Requisition'.
Early response is greatly appreciated.
Thanks an best regards
RajeevHi Masa,
Thanks for your reply.
We are using Assets with the integration of Project systems. We are now in 4.6C R/3 & SRM 5.0 system. And now R/3 upgrade and SRM upgrade going on smultaniously to ECC6.0 and SRM 7.0 respectively.
I would like to know any new functionality available in the latest upgrades and we have done lot of customization for Asset Procurement. And would like to go with Vanilla.
Can you please provide me some inputs about the Project (WBS element ) based Asset Procurement in SRM as standard.
Thanks and Regards,
Ramesh -
Standard function modules to get birthday list etc.
Dear all,
I need to read the following information, it is nice to have standard function modules, do you know any?
1. monthly birthday list
2. anniversaries of people in a month
3. Entries/Exits of people in a month
4. reminder for other HR events like Performance Review and Expiry of Probation
Thanks a lot.Alex
goto t-code SE37 and do a wildcard search:
type *birth* and hit the F4 key on keyboard
the list of function modules to extract brithdates will list out.
you will need to spend time to review if each of them fits your requirement
likewise for other function, feel free to do the wildcard search using the keyword in Se37
should you are not able to find any FM for your use, i am afraid you may need to develop your own FM
Edited by: Gregg Chen on May 19, 2011 3:20 PM
Maybe you are looking for
-
I've been "looking for printer" for four years.
Hi everyone, I decided to bite the bullet and make a forum post before giving in to my frustration and chucking the thing out the window... I am running OS 10.6.8 on a mid-2008 MacBook and have an HP Photosmart C4385 all-in-one wirelessly connected.
-
How can i upgrade to OSX Mountain Lion other than from the app store?
I am trying to upgrade to OSX Mountain Lion from OSX Lion but i get this message: "We could not complete your purchase. The product distribution file could not be verified. It may be damaged or was not signed." Further I am able to download other pro
-
My trash won't empty since I upgraded to Lion. Other than using rm -rf ~/.Trash/* in the terminal what can I do. Reparing permissions didn't hpl. regards robin
-
Planning Sequence: Error when runnning in a Process Chain
When trying to run a planning sequence in a process chain (with the correct variable input variant) I receive the following error message: Inconsistent input parameter (parameter: <unknown>, value <unknown> When running this planning sequence in the
-
Home Button Not Working After Upgrade to 2.2
I have a Gen 2 iTouch which I upgraded the firmware to 2.2. Since that occured, the Home button doesn't seem to work and then only way I can get back to the Home screen is for me to shut down the iTouch and then turn it back on. I tried to restore ba