LT12 TO confirmation error for multiple line items

Hi Experts,
We recently upgraded to ECC 6 DIMP EP6. We are not able to confirm TO with multiple line items. It is failing with an error message VL 198 that 0 quantity of material is available. We are able to confirm TO line items one by one. This TO is created for a delivery picking request. We tried with a configuration change for the delivery line item category availability check as Y as mentioned in this note 1653018. But still not working fine. Please let me know any relevant SAP note for this issue. 
Thanks
Rijil

Please run CO09 and enter material numbers to see the available quantity and see if there is some inconsistency there.
Also check MD04 for those materials to see if there is something wrong there.
If you can you can also post the screens here, if you are not sure about CO09 and MD04 interpretation.

Similar Messages

  • BDC to create SO(VA01) for multiple line items

    Hi all,
    My requirement is to create SO for multiple line items in ECC6.0
    My recording for VA01 is like this.
    start-of-selection.
    perform open_group.
    perform bdc_dynpro      using 'SAPMV45A' '0101'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBAK-AUART'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'VBAK-AUART'
                                  'ZOR'.
    perform bdc_field       using 'VBAK-VKORG'
                                  '2000'.
    perform bdc_field       using 'VBAK-VTWEG'
                                  '10'.
    perform bdc_field       using 'VBAK-SPART'
                                  '05'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'KUAGV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'RV45A-KETDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'RV45A-KPRGBZ'
                                  'D'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBAP-WERKS(01)'.
    perform bdc_field       using 'RV45A-MABNR(01)'
                                  'hrpocf'.
    perform bdc_field       using 'VBAP-POSNR(01)'
                                  '    10'.
    perform bdc_field       using 'RV45A-KWMENG(01)'
                                  '                 55'.
    perform bdc_field       using 'VBAP-WERKS(01)'
                                  '2010'.
    perform bdc_dynpro      using 'SAPLCEI0' '0109'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RCTMS-MWERT(06)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=BACK'.
    perform bdc_field       using 'RCTMS-MNAME(01)'
                                  'A_THICK_MM'.
    perform bdc_field       using 'RCTMS-MNAME(02)'
                                  'A_WIDTH_MM'.
    perform bdc_field       using 'RCTMS-MNAME(03)'
                                  'A_EQUIVALENT_SPEC'.
    perform bdc_field       using 'RCTMS-MNAME(04)'
                                  'A_BATCH_WEIGHT_MAX_SI'.
    perform bdc_field       using 'RCTMS-MNAME(05)'
                                  'A_BATCH_WEIGHT_MIN_SI'.
    perform bdc_field       using 'RCTMS-MNAME(06)'
                                  'A_COIL_INNER_DIA_MM'.
    perform bdc_field       using 'RCTMS-MWERT(01)'
                                  '3.2'.
    perform bdc_field       using 'RCTMS-MWERT(02)'
                                  '1200'.
    perform bdc_field       using 'RCTMS-MWERT(03)'
                                  'IS_11513_GR_D_1985'.
    perform bdc_field       using 'RCTMS-MWERT(04)'
                                  '26.4'.
    perform bdc_field       using 'RCTMS-MWERT(05)'
                                  '26.4'.
    perform bdc_field       using 'RCTMS-MWERT(06)'
                                  '610'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'KUAGV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'RV45A-KETDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'RV45A-KPRGBZ'
                                  'D'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai east'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBAP-WERKS(02)'.
    perform bdc_field       using 'RV45A-MABNR(02)'
                                  'hrpocf'.
    perform bdc_field       using 'VBAP-POSNR(02)'
                                  '    11'.
    perform bdc_field       using 'RV45A-KWMENG(02)'
                                  '                 66'.
    perform bdc_field       using 'VBAP-WERKS(02)'
                                  '2010'.
    perform bdc_dynpro      using 'SAPLCEI0' '0109'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RCTMS-MWERT(06)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=BACK'.
    perform bdc_field       using 'RCTMS-MNAME(01)'
                                  'A_THICK_MM'.
    perform bdc_field       using 'RCTMS-MNAME(02)'
                                  'A_WIDTH_MM'.
    perform bdc_field       using 'RCTMS-MNAME(03)'
                                  'A_EQUIVALENT_SPEC'.
    perform bdc_field       using 'RCTMS-MNAME(04)'
                                  'A_BATCH_WEIGHT_MAX_SI'.
    perform bdc_field       using 'RCTMS-MNAME(05)'
                                  'A_BATCH_WEIGHT_MIN_SI'.
    perform bdc_field       using 'RCTMS-MNAME(06)'
                                  'A_COIL_INNER_DIA_MM'.
    perform bdc_field       using 'RCTMS-MWERT(01)'
                                  '3.1'.
    perform bdc_field       using 'RCTMS-MWERT(02)'
                                  '1250'.
    perform bdc_field       using 'RCTMS-MWERT(03)'
                                  'IS_11513_GR_D_1985'.
    perform bdc_field       using 'RCTMS-MWERT(04)'
                                  '20.084'.
    perform bdc_field       using 'RCTMS-MWERT(05)'
                                  '20.084'.
    perform bdc_field       using 'RCTMS-MWERT(06)'
                                  '610'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=PDE3'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'KUAGV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'RV45A-KETDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'RV45A-KPRGBZ'
                                  'D'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai east'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBAP-POSNR(01)'.
    perform bdc_field       using 'RV45A-VBAP_SELKZ(01)'
                                  'X'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\09'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-INCO2'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'VBKD-FKDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAP-TAXM1'
                                  '1'.
    perform bdc_field       using 'VBAP-TAXM2'
                                  '1'.
    perform bdc_field       using 'VBAP-TAXM3'
                                  '0'.
    perform bdc_field       using 'VBAP-TAXM4'
                                  '0'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_DELETE'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_CREATE'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_DETAIL'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPLSTXX' '1100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RSTXT-TXLINE(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TXVB'.
    perform bdc_field       using 'RSTXT-TXLINE(02)'
                                  'FDGFDG'.
    perform bdc_dynpro      using 'SAPLSTXX' '1100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RSTXT-TXLINE(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TXBA'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\10'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/EBACK'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-POSEX_E'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAP-POSEX'
                                  '108128'.
    perform bdc_field       using 'VBKD-BSTKD_E'
                                  '3011192'.
    perform bdc_field       using 'VBKD-POSEX_E'
                                  '000005'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=PDE3'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'KUAGV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'RV45A-KETDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'RV45A-KPRGBZ'
                                  'D'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai east'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBAP-POSNR(02)'.
    perform bdc_field       using 'RV45A-VBAP_SELKZ(02)'
                                  'X'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\09'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-INCO2'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'VBKD-FKDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAP-TAXM1'
                                  '1'.
    perform bdc_field       using 'VBAP-TAXM2'
                                  '1'.
    perform bdc_field       using 'VBAP-TAXM3'
                                  '0'.
    perform bdc_field       using 'VBAP-TAXM4'
                                  '0'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_DELETE'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_CREATE'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_DETAIL'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPLSTXX' '1100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RSTXT-TXLINE(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TXVB'.
    perform bdc_field       using 'RSTXT-TXLINE(02)'
                                  'GFGFDG'.
    perform bdc_dynpro      using 'SAPLSTXX' '1100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RSTXT-TXLINE(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TXBA'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\10'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-POSEX_E'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAP-POSEX'
                                  '108128'.
    perform bdc_field       using 'VBKD-BSTKD_E'
                                  '3011192'.
    perform bdc_field       using 'VBKD-POSEX_E'
                                  '000005'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/EBACK'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBAP-POSEX'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAP-POSEX'
                                  '108128'.
    perform bdc_field       using 'VBKD-BSTKD_E'
                                  '3011192'.
    perform bdc_field       using 'VBKD-POSEX_E'
                                  '5'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=KKAU'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'KUAGV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'RV45A-KETDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'RV45A-KPRGBZ'
                                  'D'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai east'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RV45A-MABNR(01)'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\02'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-KONDA'.
    perform bdc_field       using 'VBAK-AUDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAK-VKBUR'
                                  'IN15'.
    perform bdc_field       using 'VBAK-WAERK'
                                  'INR'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBKD-KDGRP'
                                  'CF'.
    perform bdc_field       using 'VBKD-PLTYP'
                                  '01'.
    perform bdc_field       using 'VBKD-KONDA'
                                  '01'.
    perform bdc_field       using 'VBKD-BZIRK'
                                  'NORTH'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\03'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-VSART'.
    perform bdc_field       using 'VBAK-VSBED'
                                  '01'.
    perform bdc_field       using 'VBKD-KZAZU'
                                  'X'.
    perform bdc_field       using 'VBKD-VSART'
                                  'ER'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\05'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-INCO2'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'VBKD-FKDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAK-TAXK1'
                                  '1'.
    perform bdc_field       using 'VBAK-TAXK3'
                                  'l'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\09'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-ZLSCH'.
    perform bdc_field       using 'VBKD-KTGRD'
                                  '01'.
    perform bdc_field       using 'VBKD-ZLSCH'
                                  'c'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_DELETE'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_CREATE'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_DETAIL'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPLSTXX' '1100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RSTXT-TXLINE(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TXVB'.
    perform bdc_field       using 'RSTXT-TXLINE(02)'
                                  'BDFBFDB'.
    perform bdc_dynpro      using 'SAPLSTXX' '1100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RSTXT-TXLINE(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TXBA'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\11'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=KSTC'.
    perform bdc_dynpro      using 'SAPLBSVA' '0300'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'J_STMAINT-ANWS(02)'.
    perform bdc_field       using 'J_STMAINT-ANWS(01)'
    perform bdc_field       using 'J_STMAINT-ANWS(02)'
                                  'X'.
    perform bdc_dynpro      using 'SAPLBSVA' '0300'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'J_STMAINT-ANWS(03)'.
    perform bdc_field       using 'J_STMAINT-ANWS(02)'
    perform bdc_field       using 'J_STMAINT-ANWS(03)'
                                  'X'.
    perform bdc_dynpro      using 'SAPLBSVA' '0300'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'J_STMAINT-ANWS(04)'.
    perform bdc_field       using 'J_STMAINT-ANWS(03)'
    perform bdc_field       using 'J_STMAINT-ANWS(04)'
                                  'X'.
    perform bdc_dynpro      using 'SAPLBSVA' '0300'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=BACK'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'JOSTD-OBJNR'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/EBACK'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RV45A-TXT_VBELN'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=SICH'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'KUAGV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'RV45A-KETDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'RV45A-KPRGBZ'
                                  'D'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RV45A-MABNR(01)'.
    perform bdc_transaction using 'VA01'.
    perform close_group.
    if in excel file one row of records means i am succesfully creating SO.
    But for multiple i am not getting idea to create SO.
    My excel file details like this.In this excel file based on VBKD-BSTKD_E value i have to keep the records in line items.
    VBAK-AUART    :Order Type
    VBAK-VKORG    : Sales Org
    VBAK-VTWEG    : Distri Channel
    VBAK-SPART    : Division
    VBAK-KUNNR    : Sold-to-Party
    VBPA-KUNNAR   : Ship-to-Party
    VBAK-BSTNK    : PO No
    VBAK-BSTDK    : PO Date
    VBAP-MATNR    : Material No
    A_THICK_MM
    A_WIDTH_MM
    A_EQUIVALENT_SPEC
    A_COIL_INNER_DIA_MM
    A_BATCH_WEIGHT_MIN_SI
    A_BATCH_WEIGHT_MAX_SI
    VBAP-KWMENG    : Qty
    VBAP-WERKS     : Delivery Plant
    VBKD-INCO2     : Incoterm2
    VBKD-KONDA     : Price Group
    VBKD-VSART     : Shipping Type
    VBAK-TAXK1     : Cust Tax-1
    VBAK-TAXK2     : Cust Tax-2
    VBAK-TAXK3     : Cust Tax-3
    VBAK-TAXK4     : Cust Tax-4
    VBKD-ZLSCH     : Payment Method
    VBAP-TAXM1     : Mat tax clss-1
    VBAP-TAXM2     : Mat tax clss-2
    VBAP-TAXM3     : Mat tax clss-3
    VBAP-TAXM4     : Mat tax clss-4
    VBAP-POSEX     : IMPS Order No
    VBKD-BSTKD_E   : old SO in 4.6c
    VBKD-POSEX_E   : old SO Item  in 4.6c
    Text Id        : TDC No
    Text Id-ES10   : Special Inst(Unld const & Veh)
    ZOR,2000,10,5,100000,100000,PO NO 125,19.01.2008,HRPOCF,3.1,1200,IS_11513_GR_D_1985,610,20.084,20.084
    51,2010,Mumbai,01Freight-pre paid,ER,2,0,L,0,c,1,1,0,0,108128,3011192,     1,PO 444 AMD 1,Spl Inst
    based on VBKD-BSTKD_E line items has to create.
    if VBKD-BSTKD_E = 3011192 is like 4 records in excel means for these 4 should be one SO
    if it is changed to 3011193 then only different SO.
    PLs If any one knows solution pls write some sample code for me.
    If u send that code to my mail id also  very thankful.
    [email protected]
    Pls help me this is urgent requirement.
    Thanks & Regards,
    J.Lokesh

    HI,
    Instead of using BDC , why dont you make use of BAPI.
    As you are on ECC, you can make use of BAPI BAPI_SALESORDER_CREATEFROMDAT2
    Collect all your records based on PO # and pass them into line item table structure ORDER_ITEMS_IN.
    *--Logic something like this.
      loop at it_exceldata into l_line.
      loop at it_exceldata into l_so where bstkd_e eq l_line-bstkd.
      *This will loop at all the same  PO#
      *collect the data related into corr tables. and append
      endloop.
      *Now you are outside the loop.
      *Call the BAPI to update this SO
      delete it_exceldata where bstkd_e eq l_line-bstkd_e.
      endloop.
    Also pass all the necessary data to header structure ORDER_HEADER_IN
    Do not check for Sy-subrc at the end of execution.
    Instead read the Return table with message type 'A' or 'E whichi means there is an error/abort in BAPI execution.
    Remember to expicitly COMMIT_WORK after succesfull execution of BAPI using BAPI_TRANSACTION_COMMIT
    Please let me know , if you need more help in this
    Gary.

  • "BDC for multiple line items of PO"

    I am using this code to move data for multiple line items of a PO. But only one is getting transferred. I am using BDC for this.
    FORM transaction_bdc .
      DATA :
      v_cnt(2) TYPE n,
      v_bst(2) TYPE n,
      v_bn TYPE i,
      v_bstpo(25),
      v_ebtyp(25),
      v_menge(25),
      v_eeind(25),
      v_xblnr(25),
      v_xblnr1(25),
      v_ebelp(2) TYPE n,
      v_ebelpt(2),
      v_menge1(11),
      v_ebt TYPE i,
      v_vebtyp LIKE ekes-ebtyp,
      v_eb(2) TYPE n,
      v_tcselflag(40),
      v_tem(2) TYPE n,
      v_correct TYPE i,
      v_file TYPE string.
      DATA: ls_outtab TYPE tb_struc.
      DATA: l_valid TYPE c,
            l_locked TYPE c.
      CALL METHOD g_grid->check_changed_data
        IMPORTING
          e_valid = l_valid.
      IF l_valid EQ 'X'.
        LOOP AT tb_output WHERE check EQ 'X' .
          MOVE-CORRESPONDING tb_output TO itab_output.
          APPEND itab_output.
          CLEAR itab_output.
        ENDLOOP.
        IF tb_output-check <> 'X'.
          MESSAGE e003 WITH text-004.
        ENDIF.
      ENDIF.
      IF itab_output[] IS NOT INITIAL.
        PERFORM open_group.
    ***looping at purchase order level.
        LOOP AT itab_output where ebelp is not initial .
          CLEAR v_bn.
          CLEAR v_ebt.
          PERFORM bdc_dynpro USING 'SAPMM06E' '0105'.
          PERFORM bdc_field USING 'BDC_CURSOR'
          'RM06E-BSTNR'.
          PERFORM bdc_field USING 'BDC_OKCODE'
          '/00'.
          PERFORM bdc_field USING 'RM06E-BSTNR'
          itab_output-ebeln.
    ***Changing alphanumeric fields and quantity fields to character type**
    *v_ebelp = tB_OUTPUT-ebelp.
    *clear v_ebelpt.
    *v_menge1 = tB_OUTPUT-menge.
    *v_ebelpt = v_ebelp.
    ***End Of Changing**
    *Checking for the exact number of the item**
          LOOP AT tb_output where ebeln = itab_output-ebeln.
            READ TABLE itab_output INDEX 1.
            IF tb_output-ebelp = itab_output-ebelp.
              exit.
            ELSE.
              v_bn = v_bn + 1.
            ENDIF.
          ENDLOOP.
    v_bst = v_bn + 1.
    *End Of Checking**
    **Mapping items**
            v_tem = 1.
            CONCATENATE 'RM06E-BSTPO(' v_bst ')' INTO v_bstpo.
            CONCATENATE 'RM06E-TCSELFLAG(' v_tem ')' INTO v_tcselflag.
            PERFORM bdc_dynpro USING 'SAPMM06E' '0120'.
            PERFORM bdc_field USING 'BDC_CURSOR'
            v_bstpo.
            PERFORM bdc_field USING 'BDC_OKCODE'
            '=DETA'.
            PERFORM bdc_field USING 'RM06E-EBELP'
            v_ebelpt.
            PERFORM bdc_dynpro USING 'SAPMM06E' '0111'.
            PERFORM bdc_field USING 'BDC_CURSOR'
            'EKPO-BSTAE'.
            PERFORM bdc_field USING 'BDC_OKCODE'
            '/00'.
            PERFORM bdc_dynpro USING 'SAPMM06E' '0120'.
            PERFORM bdc_field USING 'BDC_CURSOR'
            v_bstpo.
            PERFORM bdc_field USING 'BDC_OKCODE'
            '=BSTA'.
            PERFORM bdc_field USING 'RM06E-EBELP'
            v_ebelpt.
            PERFORM bdc_field USING v_tcselflag
            'X'.
    **Checking weather Confirmation category already exists**
            SELECT ebtyp FROM ekes INTO v_vebtyp WHERE ebelp =
            itab_output-ebelp AND ebeln = itab_output-ebeln.
            ENDSELECT.
            IF sy-dbcnt > 0.
              v_ebt = sy-dbcnt.
            ENDIF.
            v_eb = v_ebt + 1.
    **End Of Checking**
    **For Line items**
            CONCATENATE 'EKES-EBTYP(' v_eb ')' INTO v_ebtyp.
            CONCATENATE 'EKES-MENGE(' v_eb ')' INTO v_menge.
            CONCATENATE 'RM06E-EEIND(' v_eb ')' INTO v_eeind.
            CONCATENATE 'EKES-XBLNR(' v_eb ')' INTO v_xblnr.
    **End**
            PERFORM bdc_dynpro USING 'SAPLEINB' '0200'.
            PERFORM bdc_field USING 'BDC_CURSOR'
            v_xblnr.
            PERFORM bdc_field USING 'BDC_OKCODE'
            '=BU'.
            PERFORM bdc_field USING v_ebtyp
            itab_output-ebtyp.
            PERFORM bdc_field USING v_eeind
            itab_output-eindt.
            PERFORM bdc_field USING v_menge
            v_menge1.
            PERFORM bdc_field USING v_xblnr
            itab_output-xblnr.
    **End Of Mappings**
    *loop at itab_output.
            MOVE-CORRESPONDING itab_output TO ekes.
            modify ekes.
           MOVE-CORRESPONDING itab_output TO eket.
           MODIFY eket.
           MOVE-CORRESPONDING tb_output TO ekpo.
           MODIFY ekpo.
         ENDLOOP.
          CALL TRANSACTION 'ME22N'
          USING itbdc
          MODE   'E'.
          commit work.
    perform bdc_transaction using 'ME22N'.
    **End Of Purchase Order Loop**
        PERFORM close_group.
        endloop.
         endif.

    Hi Asha,
    check the below code once...
    LOOP AT tb_output where ebeln = itab_output-ebeln.
    READ TABLE itab_output INDEX 1.
    IF tb_output-ebelp = itab_output-ebelp.
    exit.
    ELSE.
    v_bn = v_bn + 1.
    ENDIF.
    ENDLOOP.
    Here you are reading the table itab_output with index 1, it means you alway reading the first record of that internal table.
    Regards,
    Satya.

  • Pls help me to create SO using BDC for multiple line items (VA01)

    Hi all,
    My requirement is to create SO for multiple line items in ECC6.0
    My recording for VA01 is like this.
    start-of-selection.
    perform open_group.
    perform bdc_dynpro      using 'SAPMV45A' '0101'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBAK-AUART'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'VBAK-AUART'
                                  'ZOR'.
    perform bdc_field       using 'VBAK-VKORG'
                                  '2000'.
    perform bdc_field       using 'VBAK-VTWEG'
                                  '10'.
    perform bdc_field       using 'VBAK-SPART'
                                  '05'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'KUAGV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'RV45A-KETDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'RV45A-KPRGBZ'
                                  'D'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBAP-WERKS(01)'.
    perform bdc_field       using 'RV45A-MABNR(01)'
                                  'hrpocf'.
    perform bdc_field       using 'VBAP-POSNR(01)'
                                  '    10'.
    perform bdc_field       using 'RV45A-KWMENG(01)'
                                  '                 55'.
    perform bdc_field       using 'VBAP-WERKS(01)'
                                  '2010'.
    perform bdc_dynpro      using 'SAPLCEI0' '0109'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RCTMS-MWERT(06)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=BACK'.
    perform bdc_field       using 'RCTMS-MNAME(01)'
                                  'A_THICK_MM'.
    perform bdc_field       using 'RCTMS-MNAME(02)'
                                  'A_WIDTH_MM'.
    perform bdc_field       using 'RCTMS-MNAME(03)'
                                  'A_EQUIVALENT_SPEC'.
    perform bdc_field       using 'RCTMS-MNAME(04)'
                                  'A_BATCH_WEIGHT_MAX_SI'.
    perform bdc_field       using 'RCTMS-MNAME(05)'
                                  'A_BATCH_WEIGHT_MIN_SI'.
    perform bdc_field       using 'RCTMS-MNAME(06)'
                                  'A_COIL_INNER_DIA_MM'.
    perform bdc_field       using 'RCTMS-MWERT(01)'
                                  '3.2'.
    perform bdc_field       using 'RCTMS-MWERT(02)'
                                  '1200'.
    perform bdc_field       using 'RCTMS-MWERT(03)'
                                  'IS_11513_GR_D_1985'.
    perform bdc_field       using 'RCTMS-MWERT(04)'
                                  '26.4'.
    perform bdc_field       using 'RCTMS-MWERT(05)'
                                  '26.4'.
    perform bdc_field       using 'RCTMS-MWERT(06)'
                                  '610'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'KUAGV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'RV45A-KETDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'RV45A-KPRGBZ'
                                  'D'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai east'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBAP-WERKS(02)'.
    perform bdc_field       using 'RV45A-MABNR(02)'
                                  'hrpocf'.
    perform bdc_field       using 'VBAP-POSNR(02)'
                                  '    11'.
    perform bdc_field       using 'RV45A-KWMENG(02)'
                                  '                 66'.
    perform bdc_field       using 'VBAP-WERKS(02)'
                                  '2010'.
    perform bdc_dynpro      using 'SAPLCEI0' '0109'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RCTMS-MWERT(06)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=BACK'.
    perform bdc_field       using 'RCTMS-MNAME(01)'
                                  'A_THICK_MM'.
    perform bdc_field       using 'RCTMS-MNAME(02)'
                                  'A_WIDTH_MM'.
    perform bdc_field       using 'RCTMS-MNAME(03)'
                                  'A_EQUIVALENT_SPEC'.
    perform bdc_field       using 'RCTMS-MNAME(04)'
                                  'A_BATCH_WEIGHT_MAX_SI'.
    perform bdc_field       using 'RCTMS-MNAME(05)'
                                  'A_BATCH_WEIGHT_MIN_SI'.
    perform bdc_field       using 'RCTMS-MNAME(06)'
                                  'A_COIL_INNER_DIA_MM'.
    perform bdc_field       using 'RCTMS-MWERT(01)'
                                  '3.1'.
    perform bdc_field       using 'RCTMS-MWERT(02)'
                                  '1250'.
    perform bdc_field       using 'RCTMS-MWERT(03)'
                                  'IS_11513_GR_D_1985'.
    perform bdc_field       using 'RCTMS-MWERT(04)'
                                  '20.084'.
    perform bdc_field       using 'RCTMS-MWERT(05)'
                                  '20.084'.
    perform bdc_field       using 'RCTMS-MWERT(06)'
                                  '610'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=PDE3'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'KUAGV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'RV45A-KETDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'RV45A-KPRGBZ'
                                  'D'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai east'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBAP-POSNR(01)'.
    perform bdc_field       using 'RV45A-VBAP_SELKZ(01)'
                                  'X'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\09'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-INCO2'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'VBKD-FKDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAP-TAXM1'
                                  '1'.
    perform bdc_field       using 'VBAP-TAXM2'
                                  '1'.
    perform bdc_field       using 'VBAP-TAXM3'
                                  '0'.
    perform bdc_field       using 'VBAP-TAXM4'
                                  '0'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_DELETE'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_CREATE'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_DETAIL'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPLSTXX' '1100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RSTXT-TXLINE(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TXVB'.
    perform bdc_field       using 'RSTXT-TXLINE(02)'
                                  'FDGFDG'.
    perform bdc_dynpro      using 'SAPLSTXX' '1100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RSTXT-TXLINE(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TXBA'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\10'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/EBACK'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-POSEX_E'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAP-POSEX'
                                  '108128'.
    perform bdc_field       using 'VBKD-BSTKD_E'
                                  '3011192'.
    perform bdc_field       using 'VBKD-POSEX_E'
                                  '000005'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=PDE3'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'KUAGV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'RV45A-KETDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'RV45A-KPRGBZ'
                                  'D'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai east'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBAP-POSNR(02)'.
    perform bdc_field       using 'RV45A-VBAP_SELKZ(02)'
                                  'X'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\09'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-INCO2'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'VBKD-FKDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAP-TAXM1'
                                  '1'.
    perform bdc_field       using 'VBAP-TAXM2'
                                  '1'.
    perform bdc_field       using 'VBAP-TAXM3'
                                  '0'.
    perform bdc_field       using 'VBAP-TAXM4'
                                  '0'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_DELETE'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_CREATE'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_DETAIL'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPLSTXX' '1100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RSTXT-TXLINE(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TXVB'.
    perform bdc_field       using 'RSTXT-TXLINE(02)'
                                  'GFGFDG'.
    perform bdc_dynpro      using 'SAPLSTXX' '1100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RSTXT-TXLINE(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TXBA'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\10'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-POSEX_E'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAP-POSEX'
                                  '108128'.
    perform bdc_field       using 'VBKD-BSTKD_E'
                                  '3011192'.
    perform bdc_field       using 'VBKD-POSEX_E'
                                  '000005'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/EBACK'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBAP-POSEX'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAP-POSEX'
                                  '108128'.
    perform bdc_field       using 'VBKD-BSTKD_E'
                                  '3011192'.
    perform bdc_field       using 'VBKD-POSEX_E'
                                  '5'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=KKAU'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'KUAGV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'RV45A-KETDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'RV45A-KPRGBZ'
                                  'D'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai east'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RV45A-MABNR(01)'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\02'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-KONDA'.
    perform bdc_field       using 'VBAK-AUDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAK-VKBUR'
                                  'IN15'.
    perform bdc_field       using 'VBAK-WAERK'
                                  'INR'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBKD-KDGRP'
                                  'CF'.
    perform bdc_field       using 'VBKD-PLTYP'
                                  '01'.
    perform bdc_field       using 'VBKD-KONDA'
                                  '01'.
    perform bdc_field       using 'VBKD-BZIRK'
                                  'NORTH'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\03'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-VSART'.
    perform bdc_field       using 'VBAK-VSBED'
                                  '01'.
    perform bdc_field       using 'VBKD-KZAZU'
                                  'X'.
    perform bdc_field       using 'VBKD-VSART'
                                  'ER'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\05'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-INCO2'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'VBKD-FKDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAK-TAXK1'
                                  '1'.
    perform bdc_field       using 'VBAK-TAXK3'
                                  'l'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\09'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-ZLSCH'.
    perform bdc_field       using 'VBKD-KTGRD'
                                  '01'.
    perform bdc_field       using 'VBKD-ZLSCH'
                                  'c'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_DELETE'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_CREATE'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_DETAIL'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPLSTXX' '1100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RSTXT-TXLINE(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TXVB'.
    perform bdc_field       using 'RSTXT-TXLINE(02)'
                                  'BDFBFDB'.
    perform bdc_dynpro      using 'SAPLSTXX' '1100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RSTXT-TXLINE(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TXBA'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\11'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=KSTC'.
    perform bdc_dynpro      using 'SAPLBSVA' '0300'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'J_STMAINT-ANWS(02)'.
    perform bdc_field       using 'J_STMAINT-ANWS(01)'
    perform bdc_field       using 'J_STMAINT-ANWS(02)'
                                  'X'.
    perform bdc_dynpro      using 'SAPLBSVA' '0300'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'J_STMAINT-ANWS(03)'.
    perform bdc_field       using 'J_STMAINT-ANWS(02)'
    perform bdc_field       using 'J_STMAINT-ANWS(03)'
                                  'X'.
    perform bdc_dynpro      using 'SAPLBSVA' '0300'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'J_STMAINT-ANWS(04)'.
    perform bdc_field       using 'J_STMAINT-ANWS(03)'
    perform bdc_field       using 'J_STMAINT-ANWS(04)'
                                  'X'.
    perform bdc_dynpro      using 'SAPLBSVA' '0300'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=BACK'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'JOSTD-OBJNR'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/EBACK'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RV45A-TXT_VBELN'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=SICH'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'KUAGV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'RV45A-KETDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'RV45A-KPRGBZ'
                                  'D'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RV45A-MABNR(01)'.
    perform bdc_transaction using 'VA01'.
    perform close_group.
    if in excel file one row of records means i am succesfully creating SO.
    But for multiple i am not getting idea to create SO.
    My excel file details like this.In this excel file based on VBKD-BSTKD_E value i have to keep the records in line items.
    VBAK-AUART    :Order Type
    VBAK-VKORG    : Sales Org
    VBAK-VTWEG    : Distri Channel
    VBAK-SPART    : Division
    VBAK-KUNNR    : Sold-to-Party
    VBPA-KUNNAR   : Ship-to-Party
    VBAK-BSTNK    : PO No
    VBAK-BSTDK    : PO Date
    VBAP-MATNR    : Material No
    A_THICK_MM
    A_WIDTH_MM
    A_EQUIVALENT_SPEC
    A_COIL_INNER_DIA_MM
    A_BATCH_WEIGHT_MIN_SI
    A_BATCH_WEIGHT_MAX_SI
    VBAP-KWMENG    : Qty
    VBAP-WERKS     : Delivery Plant
    VBKD-INCO2     : Incoterm2
    VBKD-KONDA     : Price Group
    VBKD-VSART     : Shipping Type
    VBAK-TAXK1     : Cust Tax-1
    VBAK-TAXK2     : Cust Tax-2
    VBAK-TAXK3     : Cust Tax-3
    VBAK-TAXK4     : Cust Tax-4
    VBKD-ZLSCH     : Payment Method
    VBAP-TAXM1     : Mat tax clss-1
    VBAP-TAXM2     : Mat tax clss-2
    VBAP-TAXM3     : Mat tax clss-3
    VBAP-TAXM4     : Mat tax clss-4
    VBAP-POSEX     : IMPS Order No
    VBKD-BSTKD_E   : old SO in 4.6c
    VBKD-POSEX_E   : old SO Item  in 4.6c
    Text Id        : TDC No
    Text Id-ES10   : Special Inst(Unld const & Veh)
    ZOR,2000,10,5,100000,100000,PO NO 125,19.01.2008,HRPOCF,3.1,1200,IS_11513_GR_D_1985,610,20.084,20.084
    51,2010,Mumbai,01Freight-pre paid,ER,2,0,L,0,c,1,1,0,0,108128,3011192,     1,PO 444 AMD 1,Spl Inst
    based on VBKD-BSTKD_E line items has to create.
    if VBKD-BSTKD_E = 3011192 is like 4 records in excel means for these 4 should be one SO
    if it is changed to 3011193 then only different SO.
    PLs If any one knows solution pls write some sample code for me.
    If u send that code to my mail id also  very thankful.
    Pls help me this is urgent requirement.
    [email protected]
    Thanks & Regards,
    J.Lokesh

    If u want to add Items data, u have to handle the Table control by writing the complete code.
    U have to write code for 2 items, when u press enter u will get new row to enter new record one by one.
    Narendra

  • Legacy asset data upload for multiple line items

    Hello
    Legacy asset data upload for multiple line items- for example Building is an asset which is having different line items for purchasing of land,constructaion or renovation etc.........now to upload the legacy data what should be consider...only one line item for Building or numbers of line item.........
    which one is the proper way to do this exercise?
    regards

    Hi,
    It completely depends on clients requirement. but following are few approaches:
    1. Define Building as Asset Class.
    2. Create a Building at specific location at asset code and
    3. create asset sub numbers for other components.
    other approach would be:
    1. Define Building as Asset Class.
    2. Create a Building at specific location at asset code and
    3. create further asset codes for other components where field description will be used for relating each other.
    Regards,
    Sayujya

  • To Record  J1IS BDC  For Multiple Line Items

    Hi,
      Iam trying to record BDC for J1IS transaction.
    while  recording  material document which contains more than  8 line items , Only 8 line items get saved and the rest of the items doesn't get saved ,
        But when I  do this manually then  all the line items get saved,
        Can anyone give the remedy for this Problem (to record J1IS for multiple line items).
      Thanks in Advance.
    Regards,
    S.Janani.

    Hi Janani / Leo
    The problem might be that the scroll down functionality after 8 line items is not recorded in your recording.
    In order to overcome the issue, you need to check OK__CODE whicle page down and add it in recording after Number of line items are greater than 8.
    Please check below link for details:
    http://scn.sap.com/thread/1106677
    http://scn.sap.com/thread/797827
    http://scn.sap.com/thread/2037271
    Best Regards,
    Sachin

  • How to draw horizontal line at the end of table for multiple line items

    Dear Experts,
                       Pls can anyone help me how to draw horizontal line at the end of table for multiple line items . kindly help me regarding this
    Thanks
    Ramesh Manoharan

    Hi
       I tried as per your logic but it is not solving my problem .  when i am gone to table painter it is showing line type 1 and line type 2
      is below format.. if u see here line type 1 bottom line and line type 2 top line both are same..  so how to avoid this ?
                              line type 1
                             line type 2

  • Different currencies for multiple line items in a AP invoice?

    Hi, Expert,
    Is it possible to assign different currencies for multiple line items in a AP invoice?
    Eg:
    One vendor is supplying raw materials from different regions, and we have to raise one invoice with different currency rate  to each items 
    regards,
    Sanju

    Hi Sanju,
    It is not possible to assign different currencies for multiple line items in a AP invoice.
    Try to book the different documents(different correncies for a single vendor in a A/P Invoice).
    Regards,
    Madhan.

  • How Can I Create One Entry Sheet For Multiple Line Items of A PO

    Please Tell Me How Can I Create One Entry Sheet For Multiple Line Items of A PO

    hi,
    It is not possible to create single Service Entry sheet for multiple PO line items. It is 1 to 1 relation.
    you have to make different service entry sheets for different item of service master.
    regards
    Manish Joshi

  • Changing Ship-To Parties for Multiple Line Items

    Hello!  I am wondering if there is a way to change the Ship-To party on a sales order at the line item, besides changing each line individually.  Is there a more efficient way to change the Ship-To party for multiple line items?  We are looking at creating a fast-change transaction to allow users to change the Ship-To party at the line item level for multiple lines.  Our particular transaction will make changes by delivery group.  Does anyone know if SAP version 6.0 will have functionality to allow users to change the Ship-To party for multiple lines at one time?  Thanks!

    HI ,
    Go to tcode MASS, enter the object BUS2032, then execte-enter, now select the mass odrer item data. Here u can change the req fields.
    cheers
    reward if helpful

  • SRM 7 - defaulting values for multiple line items on shopping cart

    Hi,
    We are using SRM 7 - Employee self service - Punch out catalogues and describe requirements.
    Our scenario is this:
    - User is responsible for creating shopping carts for numerous cost centres/other users
    - Shopping cart will have multiple line items (but the cost centre/other user will be same for all line items)
    - Is it possible to define in a shopping cart that all line items will have a specific value?  E.g. all line items will be assigned to a specific cost centre?
    I know about assigning dedault values in PPOMA_BBP - but our situation is where user does not want to use this default value this time, but another value
    Any suggestions?
    Thanks

    Thanks Alex for quick reply
    To confirm, did you use the BBP_DOC_CHECK_BADI (in conjunction with the BBP_ITEM_CHECK_BADI) to look at different cost centres on the multiple lines on the shopping cart?
    Also - did you use the same BADI to give user opportunity to enter a default cost centre that is then automatically applied to all line items on the cart?
    Thanks
    Azam

  • BDC for multiple line items (VA01)

    Hi Experts,
      I create a BDC for VA01 transaction for single line item in that now i want to upload multiple line items also with  o/p of total no. of records uploaded, no. of records posted and the no. of error records...
    Can any body explain with sample code...

    Hi,
    if the flat file is containing header and item records...
    first split those records tooo two internal tables header and item..
    Loop at header ...
      process of recording steps for header....
    Loop at item...
    here create a varialbe with char 2 .. for index value....
      process of item recording steps..
      increment the index value by 1....
      here u have to pass  'p+'  OK_CODE..
    Endloop ..(item)
    Endloop...(header)
    for more info goo through this link...
    http://www.sap-img.com/bdc.htm
    hope helpful
    Raghunath.S

  • Bdc for multiple line items

    hi all,
    i am developing bdc program to upload multiple line items for ml10.
    i am uploading folling fields
    spec_no
    astyp
    txz01,
    sort1,
    waers,
    matkl,
    ekorg,
    srvpos ' service number
    menge. 'quantity
    service number and quantity are multiple line items.
    i have developed a code which is taking single record only, it is not working for multiple service no and quantity.
    include bdcrecx1.
    parameters: filename like rlgrap-filename.
    data: begin of record,
    SPEC_NO(10),
    ASTYP(4),
    TXZ01(40),
    SORT1(20),
    WAERS(5),
    MATKL(9),
    EKORG(4),
    NEW_ROW(10),
    SRVPOS(18),
    MENGE(13),
    end of record.
    data: itab_program like record occurs 0 with header line.
    At Selection Screen
    at selection-screen on value-request for filename.
    perform query_filename changing filename.
    *START-OF-SELECTION
    start-of-selection.
    *-- Upload flat data to ITAB.
    perform upload_to_itab.
    *{ chg001 -- modified as per requirement
    perform open_group.
    loop at itab_program.
    perform upload_programs.
    endloop.
    perform close_group.
    FORM UPLOAD_TO_ITAB *
    form upload_to_itab.
    call function 'WS_UPLOAD'
    exporting
    CODEPAGE = ' '
    filename = filename
    filetype = 'DAT'
    HEADLEN = ' '
    LINE_EXIT = ' '
    TRUNCLEN = ' '
    USER_FORM = ' '
    USER_PROG = ' '
    DAT_D_FORMAT = ' '
    IMPORTING
    FILELENGTH =
    tables
    data_tab = itab_program
    EXCEPTIONS
    CONVERSION_ERROR = 1
    FILE_OPEN_ERROR = 2
    FILE_READ_ERROR = 3
    INVALID_TYPE = 4
    NO_BATCH = 5
    UNKNOWN_ERROR = 6
    INVALID_TABLE_WIDTH = 7
    GUI_REFUSE_FILETRANSFER = 8
    CUSTOMER_ERROR = 9
    OTHERS = 10
    if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    write : 'File opening error.'.
    endif.
    endform.
    FORM QUERY_FILENAME *
    --> P_FILENAME *
    form query_filename changing p_filename.
    data : tmp_filename like filename.
    call function 'WS_FILENAME_GET'
    exporting
    def_filename = filename
    mask = ',.txt,.txt.'
    mode = 'O'
    title = 'Select the file to Upload'
    importing
    filename = tmp_filename
    exceptions
    inv_winsys = 01
    no_batch = 02
    selection_cancel = 03
    selection_error = 04.
    if sy-subrc = 0.
    filename = tmp_filename.
    endif.
    endform.
    *perform open_group.
    *& Form UPLOAD_programs
    text
    --> p1 text
    <-- p2 text
    form upload_programs.
    perform bdc_dynpro using 'SAPLMLSM' '0100'.
    perform bdc_field using 'BDC_CURSOR'
    'TEMP_SPEC-ASTYP'.
    perform bdc_field using 'BDC_OKCODE'
    '/00'.
    perform bdc_field using 'TMP_SPEC-SPEC_NO'
    ITAB_PROGRAM-SPEC_NO.
    perform bdc_field using 'TMP_SPEC-ASTYP'
    ITAB_PROGRAM-ASTYP.
    *****************************************************************SCREEN1
    perform bdc_dynpro using 'SAPLMLSM' '0200'.
    perform bdc_field using 'BDC_CURSOR'
    'TMP_SPEC-EKORG'.
    perform bdc_field using 'BDC_OKCODE'
    '=SRV'.
    perform bdc_field using 'TMP_SPEC-TXZ01'
    ITAB_PROGRAM-TXZ01.
    perform bdc_field using 'TMP_SPEC-SORT1'
    ITAB_PROGRAM-SORT1.
    perform bdc_field using 'TMP_SPEC-WAERS'
    ITAB_PROGRAM-WAERS.
    perform bdc_field using 'TMP_SPEC-MATKL'
    ITAB_PROGRAM-MATKL.
    perform bdc_field using 'TMP_SPEC-EKORG'
    ITAB_PROGRAM-EKORG.
    *****************************************************************END OF SCREEN2
    perform bdc_dynpro using 'SAPLMLSP' '0201'.
    perform bdc_field using 'BDC_OKCODE'
    '=BZE'.
    *perform bdc_field using 'RM11P-HEADTEXT'
    ITAB_PROGRAM-TXZ01.
    perform bdc_field using 'BDC_SUBSCR'
    'SAPLMLSP'.
    perform bdc_dynpro using 'SAPLMLSP' '0201'.
    perform bdc_field using 'BDC_OKCODE'
    '=BZE'.
    perform bdc_field using 'BDC_CURSOR'
    'ESLL-MENGE(01)'.
    perform bdc_field using 'ESLL-SRVPOS(01)'
    ITAB_PROGRAM-SRVPOS.
    perform bdc_field using 'ESLL-MENGE(01)'
    ITAB_PROGRAM-MENGE.
    perform bdc_dynpro using 'SAPLMLSP' '0201'.
    perform bdc_field using 'BDC_OKCODE'
    '=SAV'.
    perform bdc_field using 'BDC_SUBSCR'
    'SAPLMLSP'.
    perform bdc_transaction using 'ML10'.
    endform. " UPLOAD_programs
    can any body help me in this regard.
    thanks in advance
    siva

    Loop at itab_program.
    < Here will be your BDC Program>
    call transaction..... .
    endloop.
    and all the records in you internal table itab_program will get updated...
    Regards.
    Jayant
    <b>Please award if helpful</b>

  • Setting the value of a single attribute for multiple line items

    Hi all,
    I am working on a Web Dynpro application, I have created this applicaion for an accounting document so it has header data and multiple line item data. As per the requirement I have to put the following logic:
    1. When a user enters a value in the field KBLNR on the line item, all the other fields like cost centerm fund, functional area should populate from a database table based on the value of the KBLNR. to get this I have put the following code:
    TYPES: BEGIN OF t_kblp,
              fipos     TYPE kblp-fipos,
              kostl     TYPE kostl,
                      END OF t_kblp.
      DATA lv_kblnr TYPE wd_this->element_t_bseg-kblnr.
      DATA: lt_kblp TYPE STANDARD TABLE OF t_kblp,
            wa_kblp LIKE LINE OF lt_kblp,
            lt_bseg              TYPE STANDARD TABLE OF bseg,
            wa_bseg              TYPE bseg.
      DATA lo_nd_t_bseg TYPE REF TO if_wd_context_node.
      DATA lo_el_t_bseg TYPE REF TO if_wd_context_element.
      DATA: ls_t_bseg TYPE wd_this->element_t_bseg,
            lo_api_controller    TYPE REF TO if_wd_controller,
            lo_message_manager   TYPE REF TO if_wd_message_manager,
            lo_nd_tbseg          TYPE REF TO if_wd_context_node,
             lo_el_tbseg          TYPE REF TO if_wd_context_element,
             lt_el_tbseg          TYPE wdr_context_element_set,
             lv_bseg              TYPE bseg.
      lo_nd_t_bseg = wd_context->path_get_node( path = `ZDATA.CHANGING.T_BSEG` ).
      lo_api_controller ?= wd_this->wd_get_api( ).
      CALL METHOD lo_api_controller->get_message_manager
        RECEIVING
          message_manager = lo_message_manager.
      lo_nd_tbseg = wd_context->path_get_node( path = `ZDATA.CHANGING.T_BSEG` ).
      lt_el_tbseg = lo_nd_tbseg->get_elements( ).
      LOOP AT lt_el_tbseg INTO lo_el_tbseg.
        lo_el_tbseg->get_static_attributes(
                               IMPORTING static_attributes = lv_bseg ).
      IF lv_bseg-kblnr NE ' '.
          SELECT belnr
                 fipos
                 kostl
                 PSPNR
                 geber
                 saknr
                 fkber
                 grant_nbr
                 gsber
                 FROM kblp
                 inTO corresponding fields of wa_kblp
                 WHERE belnr = lv_bseg-kblnr and
                      saknr = lv_bseg-saknr.
            ENDSELECT.
    lo_nd_t_bseg = wd_context->path_get_node( path = `ZPRELIMINARY_POSTING.CHANGING.T_BSEG` ).
    * get element via lead selection
            lo_el_t_bseg = lo_nd_t_bseg->get_element( ).
    lo_el_tbseg->set_static_attributes(
                               EXPORTING static_attributes = wa_kblp ).
       CLEAR: lv_bseg, wa_kblp.
      ENDLOOP.
    everything is working fine but now the problem is couple of fields that I have in wa_kblp are with different names in bseg table and hence they are not updating... I tried putting the following logic within the loop :
    lo_el_t_bseg->set_attribute(
        name =  `PROJK`
    value = wa_kblp-pspnr ).
    but it's only setting the value of the first line item and not working for the multiple line items, can you please tell me how can do this?
    Thanks,
    Rajat Garg
    Edited by: rajatg on Jun 24, 2011 5:09 PM

    Hi Chris,
    I tried your code and it worked fine but after I put this code I am getting another issue. within the loop I had a code to make the fields non modifiable on the screen and was working fine but now what's happening is it's making the all the lines uneditable except the one with data on it (which is completely opposite), this is what I have coded:
    LOOP AT lt_el_tbseg INTO lo_el_tbseg.
        lo_el_tbseg->get_static_attributes(
                               IMPORTING static_attributes = lv_bseg ).
    IF lv_bseg-kblnr NE ' '.
      SELECT belnr
                 fipos
                 kostl
                 PSPNR
                 geber
                 saknr
                 fkber
                 grant_nbr
                 gsber
                 FROM kblp
                 inTO corresponding fields of wa_kblp
                 WHERE belnr = lv_bseg-kblnr and
                      saknr = lv_bseg-saknr.
            ENDSELECT.
    move: wa_kblp-belnr to wa_bseg-kblnr,
    wa_kblp-fipos to wa_bseg-fipos,
    wa_kblp-kostl to wa_bseg-kostl,
    wa_kblp-pspnr to wa_bseg-projk,
    wa_kblp-geber to wa_bseg-geber,
    wa_kblp-saknr to wa_bseg-saknr,
    wa_kblp-fkber to wa_bseg-fkber,
    wa_kblp-grant_nbr to wa_bseg-grant_nbr,
    wa_kblp-gsber to wa_bseg-gsber,
    lv_bseg-dmbtr to wa_bseg-dmbtr.
    append wa_bseg to lt_bseg.
    lo_nd_edit_property = wd_context->path_get_node( path = `ZPRELIMINARY_POSTING.CHANGING.T_BSEG.EDIT_PROPERTY` ).
          get element via lead selection
          lo_el_edit_property = lo_nd_edit_property->get_element( ).
          lo_el_edit_property->set_attribute(
            name =  `EDIT_FIELD`
            value = 'ABAP_TRUE' ).
          lo_el_edit_property->set_attribute(
            name =  `EDIT_WBS`
            value = 'ABAP_TRUE' ).
    endif.
    endloop.
    o_nd_t_bseg = wd_context->path_get_node( path = `ZPRELIMINARY_POSTING.CHANGING.T_BSEG` ).
    get element via lead selection
            lo_el_t_bseg = lo_nd_t_bseg->get_element( ).
      CALL METHOD lo_nd_t_bseg->bind_table
        EXPORTING
          new_items            = lt_bseg.
    Can you please see what I am doing it wrong here....

  • How to implement bapi for transaction code f-02 for multiple line items

    Hi All,
    I am having one requirement to of implementing bapi for tcode f-02.
    I have identified the name of the badi e.i.  BAPI_ACC_GL_POSTING_POST.
    but i dont have any idea how implement it.
    i have multiple line items for one header.
    Please help me in this.
    Regards,
    Shoaib.

    HI
    In recording once u save, the recording comings out the transaction.
    If u want the pop-up to display before save. Then in recording also
    after entering all data and before Save press enter or do check.Try
    this way after that save the transaction.
    Regards,
    Raghu.

Maybe you are looking for