Lumia 1520/AT&T: What is the best MicroSD card opt...

Hello,
I am writing to the Nokia forums because I have a doubt on which 64gb MicroSD card I should buy for my Nokia Lumia 1520 (AT&T model). I want to use this card for photos and video recording at 1080p up to 30FPS.
Doing some research, I found that for best results I need a Class 10 MicroSDXC card if I don't want the video to skip during the recording if writing the video directly to the card as I record. Apparently I also have to look for the UHS-1 designation aside from Class 10.
Therefore, I went shopping around in Amazon.com and I have narrowed down my choices to the following three cards.
Sandisk 64GB Class 10 UHS-1
Transcend 64GB MicroSDXC Class 10 UHS-1
Sony 64GB MicroSDXC Class 10 UHS-1
Out of the three choices which one provides the better option? I am leaning towards the Transcend MicroSD card, but would like to get a feedback from Lumia 1520 owners.
Michael
Nokia Lumia 1520 | Windows Phone 8.1 "Lumia Cyan"

The sandisk is the one I use with no issues whatsoever
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

Similar Messages

  • HT4664 What is the best graphics card for FCPX?

    In the nonstop anti-FCPX propaganda is an article of interest — posted 7/9/12 — comparing the benchmarks of FCPX and PP6.
    http://www.streamingmedia.com/Producer/Articles/ReadArticle.aspx?ArticleID=83582 &PageNum=1
    The system used was a 2 x 2.93 GHz Quad-Core Mac Pro from early 2009 running MacOS X version 10.7.4 with 12 GB of RAM and an NVIDIA Quadro FX 4800 graphics card with 1.5 GB of onboard RAM.
    In most cases PP6 outperformed FCPX with this configuration. However, in the comments Ben Balser pointed out that FCP X's A/VFoundation engine wasn't ideal on the NVIDA card:
    "Quadro is actually not the best card for FCP X's A/VFoundation engine, but great for CS6's Mercury engine, so the test is amazingly flawed right there. Try both on a 5780 card and watch things drastically change. I've done that test myself. Exporting to Compressor uses a MUCH more sophisticated encoding engine meant for higher level, professional transcoding, not simple outputs, which are faster using Export Media…"
    Apple lists this card on its support page: http://support.apple.com/kb/HT4664
    So,
    What is the best graphics card for FCPX?

    Ben,
    Thanks for chiming in on that article. It would be good to have a benchmark comparison with the two systems each with a preferred card.
    I'm hoping to see some other comparisons on this thread. Also, some links to other articles about best practices and configurations.

  • What's the best graphics card without upgrading PSU?

    I know the K430 JU has a wimpy 280 watt power supply. I don't want to go through hassle of replacing the PSU, due to I won't be able to have the front lights or the top speed shifter working.
    However, I might be interested in getting a better graphics card. Considering the power supply, what's the best graphics card I could use that wouldn't make the system overheat?

    Go here and enter your system details, followed by adding in a graphics card in the range you might like.
    If the wattage is too high, keep decreasing the card specs until you get something that falls in the range of 200-240W. 
    After this, you must check the requirements of the card. Make sure that the +12V rail has enough amperage for your card. My 280W PSU has 18A on +12V. 
    It would be better if you upgrade the PSU to a good branded one, as it would be more hassle with a new video card that refused to run because of an inadequate power supply.Replacing the PSU is quite straightforward, and will save you a lot of problems in the long run.
    The P9 connector is responsible for supplying power to the speedshifter. You could maybe find an adapter, but I'm not sure. By default, turbo is set to AUTO so you shouldn't notice any differences playing in game.

  • What's the Best Business-Card Scanner for Leopard?

    Hello, All:
    What's the best business-card scanner for the Mac, using Leopard? Anyone currently using one or know of one? Or two?
    Thank you,
    Dean

    I use the IRIS card scan which works but is a long shot worse than the Cardscan which i used to have on a pc back in 2000.... there is currently no really good solution for business card scanning on the mac that i have seen.

  • What is the best sound card to go in a 2.0ghz G5

    what is the best sound card to go into a G5
    I'm going to buy logic and am already using native instruments komplete, i also use itunes alot and other software
    so it needs to work with all software but still be powerful and preferably have phono or jack inputs/outputs

    You'll need to look for M-Audio cards.
    There aren't any new ones in production, but used can be found.
    M-Audio 7.1 PCI card
    Various M-Audio cards (old)
    Careful with older hardware, as drivers were often not updated as fast and as far as OS X.

  • What's the best graphic card for FCP X and a Mac Pro (early) 2008?

    I have a Radeon HD 3870 in my Mac Pro, it seems that I cannot use this configuration with Final Cut Pro X. Then what's the best graphic card for FCP X usable in a Mac Pro (early) 2008?
    Thx,
    Phil

    You can get a 5770 radeon ATI MAC card
    Avoid the 5770 cards on ebay and Amazon - many are black market or manipulated cards. 
    Buy it from Apple online store or B&H photo or Macconection
    And in my case, I was able to sell my old 2600 XT card on ebay for $65 and put that money toward a 5770 card (Which was about $230 minus the $65)
    I installed the 5770 in my early Mac Pro 2 x 2.8 and it works great

  • What is the best video card my computer can handle?

    Hi I  currently have this HP Desktop PC: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02636777&lc=en&dlc=en&cc=us&lang=en&product=505...
    I wanted to know what the best video card this computer can handle WITHOUT replacing the power supply.
    this computer has a power supply of 250W but I was told that it could handle a Radeon HD 5570 but the 5570 requires "Stream Processors: 400 Stream Processing Units " does that mean it requires 400W power supply?
    My questions:
    1) Can my HP PC handle the Radeon HD 5570?
    2) If it can't what is the best video card that my computer can handle that is BETTER than the one it comes with, NVIDA GeForce 6150 SE?

    Hi,
    I would recommend that you upgrade your power supply and not go against the video card manufacturer's recommendation.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • What is the best video card for 3D?

    I'm getting a 2008 Mac Pro, will equip it with 10GB of RAM. What is the best video card for 3D rendering? I've read that the stock ATI 2600 card is woefully inadequate. I've also read that the NVIDIA 8800 card is better for gaming, and has caused some problems anyway. I can't spring for the top-end Quadra card that Apple offers. Are there good, cost-effective options for 3D work? Can I even get a video card on the open market that is not flashed by Apple?

    Basically there are only three options available:
    1. ATI 2600
    2. ATI 1900
    3. NVidia 8800
    The latter is the best of the three. See benchmark results at Bare Feats.
    You cannot use a video card not provided by Apple because they will not work with OS X or the hardware.

  • What is the best Video Card I can get for an Early 2008 Mac Pro?

    What is the best Video Card I can get for an Early 2009 Mac Pro3,1?

    A 3,1 is "Early 2008" with DDR2 FBDIMMs, Intel 54xx Harpertown, and not 2009 Nehalem with DDR3.
    http://www.barefeats.com bench tests. A 3,1 does not improve as much due to its old PCIe 2.0 implementation for one thing.
    "Best" is hugely subjective. For what? cost versus performance and whether you need CUDA support or AMD - dual AMD's for FCP-X for instance.
    I think GTX 970 right now is close to "best".
    And of course shop here:
    http://www.macvidcards.com

  • What is the best graphics card for me

    i have a G5 dual 2.0Mhz (not intel).
    i upgraded to an ati radeon 9800 with 256M of memory and performance did improve over my 9800 with 128M of memory. however, i am still experiencing some slow downs that i suspect are graphics-related. what is the BEST option for me?

    Absolutely agree with Mike. My X800 is wonderful. I never really did A/B tests with the original 9600 but Aperture is very pleasant with the X800.
    Sam

  • What is the best video card to edit uncompressed .avi digibeta files.

    I just digitised my digibeta footage into uncompressed .avi video files.
    I just would like to know what will be the best way to edit using FCP.
    What video card do I need? What are the best specs that i need to have on a mac pro or a mac book pro.
    How is it possible?
    Thx,
    James

    Why .avi?
    Final Cut Pro works with QuickTime .mov files.
    The video card in your MacBook Pro will be fine. The way to avoid rendering is to make sure that your Easy Setup and Sequence Settings match your source material.

  • What is the best cf card reader for ipad 3 available in uk

    what is the best compact flash reader for the ipad 3, available in the uk that works with ios6.  thks

    You asked about CF, which is Compact Flash (which is larger than and different from SD cards). CF is used typically in higher end digital cameras.
    Here is the CF reader I recommend:
    Hoodman USB 3.0 Raw Steel UDMA Card Reader for CompactFlash and SD Cards
    http://www.adorama.com/HNRAWUSB3.html?utm_source=ET&utm_medium=TransactionalEmai l&utm_campaign=2point0Product1
    (also available from other sellers, including Amazon and many camera stores simply stock it on their shelf)
    This product reads two kinds of cards -- CF and SD. It is very good at doing those two things (as opposed to cheap readers that read 20+ types of cards and are flimsy and don't work all that well and don't last).
    This Hoodman device is ruggedly built, largely metal, and has a special pin guard "drop door" that protects the numerous delicate pins in the reader from accidental damage, which is what often happens to these CF readers -- namely a few of the many delicate pins get bent unintentionally after a period of use. This has been the bane of CF and its readers, those many delicate pins. This Hoodman design directly addresses the issue and from the reviews I've read and my daughter's experience with it, they seem to have succeeded.
    It comes with USB 3.0, which is very fast (if you have the 3.0 port), and it works as USB 2.0 if you have the older interface. It reads the latest and fastest of the CF cards as well.

  • What is the best graphics card compatible with the original Mac Pro?

    I have an original Mac Pro with dual 2.0GHz DC Xeons.  It currently has a GeForce 7300.  I would like to know the best Apple graphics card it can support, and the best "flashed" PC graphics card it can support.  I would like to be able to play games, but it doesn't have to be on BEST settings.  What are the best GPUs that are compatible with Mac Pro 1,1?
    Thanks!!

    You may have to work at getting the ATI HD5870 to work with a Rev 1.1 MacPro, but the 5770 should be fine.  It's not as good a card as the 5870, but much faster than your original, and also a lot cheaper than the 5870!  That said, neither is particularly cheap.
    If you're techno savvy, you can have a much bigger choice, and can use a generic PC card and 'flash' it to work with the Mac.  If you use Snow Leopard or Lion, you may get it to work straight off, as they have drivers that work on many of the PC cards.

  • What is the Best Graphics Card for G4 Gigabit Ethernet?

    Hi, i use my trusty g4 dual 450 at the moment and i cant help but feel sorry for it.
    I think it could do with a bit more ZING
    I was looking though some of the graphics card upgrades avalable and i want to make sure i get the best
    that i can get for it. I thought the ATI Radeon 9800 pro with 128mb vram was the best i could do but lately
    i found better ones that would supposedly work with it.
    Can anybody help out a die-hard G4 fan and say whats the best my mac can handle?
    Oh yea, I want to see if i can manage to play minecraft well/desently on my mac
    and i have my eyes on some 1.6 ghz and 1.8 ghz processors on ebay to help do this, think its a good idea?

    I was hoping japamac would reply first, but...
    See japamacs page here on the best AGP cards for G4s & G5s...
    http://www.jcsenterprises.com/Japamacs_Page/Blog/4B4B7BA2-7ABB-47F1-87AC-B03D379 42BEE.html
    You need an AGP 2 x card.

  • TS1935 I have the video card model . What is the best video card for a 1.6GHz PowerPC G5 please?

    Hello
    What is the best (most modern and reliable) video card (AGP) which will work in a 1.6GHz PowerPC G5 (mid 2003)?
    I believe I have ATY,RV350, and according to the attached article, it may be causing video start up problems.
    Thank you
    Adam

    Hi Adam,
    See japamacs page here on the best AGP cards for G4s & G5s...
    http://www.jcsenterprises.com/Japamacs_Page/Blog/4B4B7BA2-7ABB-47F1-87AC-B03D379 42BEE.html
    Rated slowest on top, fastest on bottom.
    Though with no power loght & such, I'm not sure that is the problem or not... does the Hard drive(s) spin up?

Maybe you are looking for

  • Unable to open sales order since sales office is deleted from configuration

    Hi All, We are facing a peculiar issue in our production system. The issue is we have created a sales order in 2009 and now we want to delete the sales order to close a WBS. When the sales order was created the sales office entered for that order is

  • Errors in While trying to Deopy Web Dynpro Application

    Hi,   I have NetWeaver 2004S in My local System. I am facing one problem while deploying that Web Dynpro Application from NWDS. Error is pasted below. But i can deploy EP Application. I am facing the same problem when i tried to Deploy from Remote GU

  • Grouping to display null values for all the missing dates

    Hi SAP, I am trying to display '0.00' value for all the missing dates in my crystal reports as follows: 17-Jan-14     40.00 18-Jan-14       0.00 19-Jan-14       0.00 20-Jan-14     80.00 However, my crystal report is showing as follows: 17-Jan-14    

  • Can I purchase a gift card?

    Can I buy a gift card with a credit card? With my walmart card I tried to buy a prepaid mastercard and it wouldnt let me. Is this always true or does it depend on the merchant/cc company?  

  • I have a 4s and can only use speaker phone to talk?

    I have a 4s an when talk on it the only way people can hear me is if I use speaker phone, sounds strange to me is this common?