Lumira Server Error
We have successfully installed Lumira Server in a DEV environment. I am able to see Analytical views which I created from my browser but when I attempt to publish from the client I receive the following error:
Error - The dataset could not be published to SAP Lumira Server because publishing to the SAP HANA layer failed. Reason is ''. (HDB 11009)
We followed all the steps in the guide
http://help.sap.com/businessobject/product_guides/vi01/en/lumS115_user_en.pdf
We're raise a ticket but I'm just curious if anyone has seen this issue before.
I still thinking about a security issue:
Before users can publish content to SAP HANA, they must be assigned specific
privileges and roles. These roles and privileges are also required for
retrieving data from SAP HANA. Use the SAP HANA Studio application to assign
user roles and privileges. For information on administrating the SAP HANA
database and using SAP HANA Studio see SAP HANA Database – Administration Guide.
For information on user security, see the SAP HANA Security Guide (Including SAP
HANA Database Security).
The user account used to log into the HANA system
from Lumira must be assigned to the "MODELING" role (in HANA).
Note:
This action can only be performed by a user with ROLE_ADMIN
privileges on the SAP HANA database. When an SAP Visual Intelligence user
logs into the SAP HANA system, the internal _SYS_REPO account must:
• Be granted the SELECT SQL Privileges.
• Have the Grantable to others option selected on the (SAP Visual Intelligence) user's schema.
To configure _SYS_REPO for the SAP Visual Intelligence user
If an account for the Lumira user is already defined in the SAP HANA system:
1. From the system connection in the SAP HANA Studio Navigator window, go to Catalog > Authorization > Users.
2. Double-click the _SYS_REPO account.
3. Under the SQL Privileges tab, click the + icon, enter the name of the user's schema, and click OK.
4. Choose SELECT and the corresponding Yes under Grantable to others.
5. Click Deploy or Save.
Tip:
You can also open an SQL editor in SAP HANA Studio and run
the following SQL statement:
GRANT SELECT ON SCHEMA <user_account_name> TO _SYS_REPO WITH GRANT OPTION
If your user has this rights, I dont have an additional idea up to now
Similar Messages
-
SAP LUMIRA Desktop publication to SAP LUMIRA server
Dear SAP Lumira community,
after installation and setup of latest SAP lumira desstop and lumira serveur on SAP HANA 1.00.81.000 following nice configuration guidance provided by SAP
http://help.sap.com/businessobject/product_guides/vi01/en/lumS118_install_en.pdf
and following exchange of the community
HANA set up: http://scn.sap.com/community/lumira/blog/2014/06/30/prepare-a-hana-system-for-lumira-server-install
Troubleshooting: http://scn.sap.com/community/lumira/blog/2014/06/30/prepare-a-hana-system-for-lumira-server-install--trouble-shooting
Installing SAP Lumira Server: http://scn.sap.com/community/lumira/blog/2014/06/10/how-to-install-sap-lumira-server
Installing SAP Lumira add-onto BI 4 Part 1: http://scn.sap.com/community/lumira/blog/2014/07/01/how-to-install-sap-businessobjects-bi-add-on-for-sap-lumira
Installing SAP Lumira add-onto BI 4 Part 2 : http://scn.sap.com/community/lumira/blog/2014/07/02/how-to-install-sap-businessobjects-bi-add-on-for-sap-lumira-part-2
and of course
How to install SAP Lumira Server, Publish Datasets and Stories
try to use following OSS note to resolve my problem
1823771 - SAP Lumira 1.0 - Insufficient rights: Unable to connect to HANA server, or Not enough rights to open view (HDB 02074).
1995325 - Error when publishing Lumira to Server
like following exchange community : Lumira Server Error
i have encountered the following problem when i try to publish from my LUMIRA desktop to LUMIRA server
So my question is simple may i miss something ? may be inside FIORI LUMIRA Administration ...
Debug mode of SAP LUMIRA desktop 1.18 is not like previous version , do i need to update something inside sap lumira.ini ?
Thanks in advance for your feed-back and supportSo after modification of SAP LUMIRA desktop init file i have following error
2014/09/11 13:31:30.696000|>>|S| |10908| 54| |||||||||||||||[com.sap.hilo.datasource.hanaview.internal.context.Helpers]Query[5] : Execution failure. Elapsed Time : 64 ms.
2014/09/11 13:31:30.698000|>>|S| |10908| 54| |||||||||||||||[com.sap.hilo.datasource.hanaview.internal.context.Helpers]
com.sap.db.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: [258]: insufficient privilege: Not authorized
2014/09/11 13:31:30.711000|>>|S| |10908| 54| |||||||||||||||[com.sap.hilo.datasource.hanaview.internal.BimcHanaModelProvider]
Cannot execute the query : insufficient privilege. (HDB 02013)
at com.sap.hilo.common.hana.AbstractHanaDBHelper.createUserException(AbstractHanaDBHelper.java:970)
Seem authorization error ( roles,...) so continue to investigate on witch authorization i need ... -
Lumira Login Error "Check the Server Name and Instance ID"
Dear Experts
I installed Lumira Desktop and was able to connect to the
HANA Server.
Later while I was working the software hanged and I had to
shut it down.
Now, after re-opening the software I receive error "Check the Server Name and Instance ID"
(though the server credentials are same as error and correct”
Any suggests on how to rectifyI wonder if one of the following KBAs may give you a clue?
1995325 - Error HDB 11009: The dataset could not be published to SAP Lumira Server because publishing to the SAP HANA layer failed. Lumira Server
2134259 - Lumira LaunchPad Logon Hangs
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow me on Twitter (#SAPLumira)
Got Enhancement ideas? Use the SAP Idea Place -
Error Publishing Storyboard to Lumira Server
We recently installed Lumira Server. When trying to publish a storyboard created from Excel data to Server, we get the following error: " The data could not be inserted into the calculation engine (HDB 10002)".
We've followed the instructions in http://help.sap.com/businessobject/product_guides/vi01/en/lumS115_user_en.pdf.
Also, The user has both the sap.bi.common::BI_DATA_ANALYST and MODELING roles granted.
Has anyone else run into this issue and been able to fix it?Kelly,
there are a couple of notes - could you check this one :
https://service.sap.com/sap/support/notes/1995325 -
SAP Lumira 1.18 - Error while publishing story to Lumira Server
Hi,
I installed Lumira Server and did the configuration in SAP Fiori as mentioned in the blog below.
Simplified SAP Lumira Server Feature Configuration
I created following users with mentioned roles.
LSADMIN - sap.bi.admin::BI_CONFIGURATOR and sap.bi.admin::BI_ADMIN
LUMIRADEV - sap.bi.common::BI_DATA_ANALYST
LUMIRADEMO - sap.bi.common::BI_DATA_CONSUMER
I logged into SAP Fiori with LSADMIN and successfully added Lumira Configuration Tile to New Group "SAP Lumira Server" and Configured all the roles for Technical user (LUMIRATECH) that has sap.bi.common::BI_TECH_USER role assigned. It was successful. Please see the screenshot below.
After this when I tried to publish a story (created using excel data) from SAP Lumira Desktop application to SAP Lumira Server with LUMIRADEV user, I am getting below error.
Do I need to give any additional privileges to LUMIRADEV/LUMIRADEMO ids to be able to create/view stories?
Please suggest.
Thanks,
AbhijitHi Henry,
We have SAP HANA SPS 08 Database Revision 82.
I suspect this is an issue with some HANA Authorizations. So as a random trial, I assigned MODELLING role to LUMIRADEV user and also granted SELECT rights on LUMIRADEV schema to _SYS_REPO with grant option. Post that I noticed, I could publish Stories created on HANA in Online mode to Lumira Server with out any issue but still having same issue for other data sources e.g. HANA Offline, Excel etc.
Please let me know if there are any additional rights required for LUMIRADEV user.
Thanks,
Abhijit -
SAP Lumira Server 1.18 - Error While creating visualization
Hi,
I installed Lumira Server 1.18 and configured as mentioned in the blogs below.
Simplified SAP Lumira Server Feature Configuration
I created following users with the roles mentioned -
LSADMIN - sap.bi.admin::BI_CONFIGURATOR and sap.bi.admin::BI_ADMIN
LUMIRADEV - sap.bi.common::BI_DATA_ANALYST
LUMIRADEMO - sap.bi.common::BI_DATA_CONSUMER
I did the configuration in SAP Fiori mentioned in the blog with LSADMIN id. I also had Technical user id LUMIRATECH with sap.bi.common::BI_TECH_USER role which was used for configurations in Fiori. It was successful. Please see the screenshot below.
After that I logged on to SAP Lumira Server Launchpad (http://<SERVER>:80<INSTANCE>/sap/bi/launchpad) with LUMIRADEV user. I acquired the dataset from excel. But when I tried to create visualization post successful acquisition, I am getting below error on dropping any dimension/measure on to chart.
Please help. Do I need to give any additional rights to LUMIRADEV?
Thanks,
AbhijitHi Henry,
We have SAP HANA SPS 08 Database Revision 82.
Are there any additional authorizations required for LUMIRADEV user (user which is used for Lumira Server). Please note I am able to publish stories and data sets created on top of HANA Online connection from Lumira Desktop and I am able to access, edit Stories as well as create visualization from published data set on Lumira Server. I suspect this is an issue with authorization.
Appreciate your help.
Thanks,
Abhijit -
Error while displaying view with Lumira Server
Hi guys,
I´m not able to display any of my calculation views and prepare my dataset with Lumira Server 1.18. Any thoughts?
Regards, Christoph.Please make sure that the following configurations are complete:
1) Fiori Configuration described in the help documentation :
http://help.sap.com/businessobject/product_guides/vi01/en/lumS118_install_en.pdf:
-Section 2.3, 2.4 and 2.5
2) Implement SAP Note 2044187
3) Also see this blog that has all the config steps and make sure that they are done:
http://scn.sap.com/community/lumira/blog/2014/06/16/sap-lumira-server-post-install-configuration -
Publish Dataset and history in sap lumira server
Hi Experts
I'm trying to publish a dataset and story from the sap Lumira desktop to Lumira server.
Tools used
SAP HANA DATABASE REV.80 INSTANCIA EN WINDOWS AZURE
SAP LUMIRA DESTOP V1.18
SAP LUMIRA SERVER V1.18
The process I followed is as follows:
1. Create Users:
CONFIG: Assign the role sap.bi.admin :: BI_CONFIGURATOR. Some other role or privilege required?
TECNICO: Assign the role sap.bi.common :: BI_TECH_USER. Some other role or privilege required?
ANALISTA: Assign the role sap.bi.common :: BI_DATA_ANALYST. This user is the one that has the role to publish in Lumira sap server. Some other role or privilege required?
2. Entry to http: // <HOSTNAME> 80 <INSTANCE> / sap / hana / xs / FormLogin /
I sign in with the password created in hana studio for each user and then make the change the password of each user CONFIG - TECNICO – ANALISTA
3. Entry to http://<HOSTNAME>:80<INSTANCE>/sap/bi/launchpad/fiori
I sign in with the user CONFIG and in the catalag administration of sap Lumira server income in the field Enter technical user TECNICO, so I confirm the sql connection.
4. Entry to http: // <HOSTNAME> 80 <INSTANCE> / sap / hana / xs / admin
I sign in with the user CONFIG sap.bi.launchpad.logic.v2 following path of the package and confirm that the sql connection is for the user TECNICO
5. Entry to Sap lumira Desktop, sign in with the user ANALISTA to access the dataset, I create visualization and history, the last step is to publish the dataset and story in SAP Lumira server, for this I sign in with the user ANALISTA but when I clic on the button PUBLISH IN SAP LUMIRA SERVER is show me this error:
Error - The dataset could not be published to SAP Lumira Server because publishing to the SAP HANA layer failed. Reason is ''. (HDB 11009)
I searched many blogs of sap and tested with the following options but None of the above helped me to solve the problem.
http://scn.sap.com/community/lumira/blog/2014/06/10/how-to-install-sap-lumira-server
http://scn.sap.com/community/lumira/blog/2014/06/21/sap-lumira-server-on-hana--part-2
http://scn.sap.com/thread/3532168
http://www.saptechies.com/access-privileges-required-sap-lumira-from-sap-hana/
http://scn.sap.com/thread/3523762
http://scn.sap.com/community/lumira/blog/2014/06/16/sap-lumira-server-sap-fiori-launchpad-integration
http://www.saptechies.com/security-settings-run-lumira-hana-online-shl-views/
http://scn.sap.com/community/lumira/blog/2014/06/16/sap-lumira-server-post-install-configuration
6. Another issue is when I access to Lumira server http: // <HOSTNAME> 80 <INSTANCE> / sap / bi / launchpad / and I sign in with the user ANALISTA, I find a number of the dataset in lumira server but when I run any for create a compose can not access hana dataset.
Shows me the following error
Please help me with this issues
ThanksHi John,
I also forwarded the incident to SAP and as suggested by SAP, after assigning sap.hana.xs.lm.roles::Administrator my issue was resolved.
Regards,
Abhijit -
Sharing stories on Lumira Server
Hello,
I am getting the following error when trying to share my story to SAP Lumira Server:
The dataset could not be published to SAP Lumira™ Server because publishing to the SAP HANA layer failed. Reason is '<Not available>'. (HDB 11009)
The tracelog shows the following
The dataset could not be published to SAP Lumira™ Server because publishing to the SAP HANA layer failed. Reason is '<Not available>'. (HDB 11009)
at com.sap.hilo.platform.viweb.internal.VIWebPublisher.getPackageNameFromServer(VIWebPublisher.java:432)
at com.sap.hilo.platform.viweb.internal.VIWebPublisher.getViewPackageName(VIWebPublisher.java:449)
at com.sap.hilo.platform.viweb.internal.VIWebPublisher.publishDataSet(VIWebPublisher.java:504)
at com.sap.hilo.platform.viweb.internal.VIWebPublisher.publishDataSet(VIWebPublisher.java:92)
at com.sap.hilo.platform.viweb.internal.VIWebDashboardPublisher.publishDataSet(VIWebDashboardPublisher.java:119)
at com.sap.hilo.platform.viweb.internal.VIWebDashboardPublisher.publishDataSet(VIWebDashboardPublisher.java:1)
at com.sap.hilo.platform.common.base.ShareCommonDashboardPublishingLogic.publish(ShareCommonDashboardPublishingLogic.java:152)
at com.sap.hilo.platform.viweb.internal.VIWebDashboardPublisher.publishDashboard(VIWebDashboardPublisher.java:290)
at com.sap.hilo.service.infrastructure.publication.internal.PublicationServiceImpl.publishDashboard(PublicationServiceImpl.java:135)
at com.sap.hilo.desktop.share.v2.common.service.PublishDashboard$PublishDashboardTask.run(PublishDashboard.java:169)
Caused by: The dataset could not be published to SAP Lumira™ Server because publishing to the SAP HANA layer failed. Reason is 'ServerNotConfigured'. (HDB 11009)
at com.sap.hilo.platform.viweb.internal.VIWebPublisher.getPackageNameFromServer(VIWebPublisher.java:420)
... 9 more
How i created the story
- Source: simple .csv file
- Visualization: Column Chart
- Story: The Column Chart + dimension as control
- Sharing: Story -> Publish to SAP Lumira Server
Which versions do I use
SAP Lumira Desktop: 1.15.1
SAP Lumira Server: 1.15
Does anyone have a suggestion on how to solve this?
Glad for any help!
Best regards
MatthiasHello Matthias,
Please see KBA 1995325 - Error when publishing Lumira to Server which describes how to resolve this issue.
Quick link:
http://service.sap.com/sap/support/notes/1995325
Good luck!
Tammy -
Unable to Publish LUMS file to Lumira Server on HANA
Hi SCN Community,
I did quite a bit of research on this topic on SCN and other blogs but couldn't find the answer. I did all the configuration according to KBA 1995325.
I have installed Lumira Server 1.23 on HANA SPS9. I have went through the configuration guide and done all the configuration I can find via Fiori portal.
The issue I am having is I can create a lums document(tried Excel, Universe, HANA online/offline) in Lumira Desktop and it works fine but when I publish it to Lumira Server I get the following error. I get the same error when I try to create a data set in Lumira Server itself.
Also I can publish the same lums document to Lumira Cloud and it works fine.
I will appreciate any help. Thanks
1st screenshot is of the published doc and the 2nd is when I try to create a data setHi Gaurav,
Try it without using Proxy (under Network, Preferences), and also (in case of online HANA view) use the same server name (including the domain name) in both the connection dialog, and Network, Preferences dialog.
Also you can refer below link:
Simplified SAP Lumira Server Feature Configuration
Regards,
Megha Jassal -
Lumira Server - Authentication Issues
Hi all!
I just finished installing Lumira Server 1.15, following through all the config steps (http://server:port/sap/hana/xs/sqlcc/) and logging on with a user that has the sap.bi.common::BI_DATA_ANALYST role I get a list of all views that are deployed in HANA, but I cannot open a single one - the only icon I get is the "Info" icon...
I also followed all steps described in SAPNote 1823771.
What am I missing here? Thanks!
BTW, we're running on HANA Rev 73.Thanks Henry - this helps...
...however, if I look at section 2.3.2 of the Lumira Server User Guide (http://help.sap.com/businessobject/product_guides/vi01/en/lumS115_user_en.pdf), I don't all the icons and options mentioned there "share", "info", "delete" - I only get info, even if I access a data set that I own. So I am still confused with respect to what the benefit of SP15 is (and when to expect an enhanced version/new SP)?
Also, when I try to publish a story from Lumira or Predictive Analysis to Lumira Server I do get the following error message:
The requested operation has failed because the session on SAP Lumira™ Server appears to be invalid. (HDB 11024)
Thanks again,
Christian -
SAP Lumira Desktop - Lumira Server problem
Hi everyone,
Since a couple of days I try to publish some reports from SAP Lumira Desktop on SAP Lumira Server. Both versions are 1.15 and SAP HANA version is rev70.
I installed Lumira Server as mentioned in installation guide. Imported package, created related users with needed roles and did define user in xs engine admin. But when I try to connect from Lumira Desktop to Lumira Server I get the error below. I also attached the error trace I found in HANA.
Unfortunately couldn't resolve the problem and I'm not sure where to look.
Any ideas?Hi,
I checked the trace file in Lumira desktop and found the error below. Any ideas?
2014/06/19 06:20:11.123000|==|S| | 2772| 42| |||||||||||||||[com.sap.hilo.platform.viweb.internal.VIWebUserSessionManager]Opening VIWeb session
2014/06/19 06:20:12.341000|>>|S| | 2772| 42| |||||||||||||||[com.sap.hilo.platform.viweb.internal.VIWebUserSessionManager]Session cannot be opened for user LUMIRAUSER on http://server:8001/sap/bi/launchpad. Check the parameters., reason is: No successful authentication possible
2014/06/19 06:20:12.344000|>>|S| | 2772| 42| |||||||||||||||[com.sap.hilo.desktop.embeddedserver.httpservice.HTTPAdapter]Call to service 'openViWebSession' failed
com.sap.hilo.desktop.embeddedserver.VIServiceException
at com.sap.hilo.desktop.share.v2.common.service.OpenLumiraPlatformSession.execute(OpenLumiraPlatformSession.java:146)
at com.sap.hilo.desktop.share.v2.viweb.service.OpenViWebSession.execute(OpenViWebSession.java:22)
at com.sap.hilo.desktop.h5v2.common.service.BaseService.execute(BaseService.java:33)
at com.sap.hilo.desktop.embeddedserver.httpservice.HTTPAdapter.execute(HTTPAdapter.java:89)
at com.sap.hilo.desktop.embeddedserver.DispatcherServlet.handleRequest(DispatcherServlet.java:101)
at com.sap.hilo.desktop.embeddedserver.DispatcherServlet.doPost(DispatcherServlet.java:86)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:755)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:848)
at org.eclipse.jetty.servlet.ServletHolder.handle(ServletHolder.java:598)
at org.eclipse.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1367)
at com.sap.hilo.desktop.embeddedserver.JsonPaddingFilter.doFilter(JsonPaddingFilter.java:78)
at org.eclipse.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1338)
at com.sap.hilo.desktop.embeddedserver.clientappcache.StaticCacheGeneratorFilter.doFilter(StaticCacheGeneratorFilter.java:98)
at org.eclipse.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1338)
at com.sap.hilo.desktop.embeddedserver.configurator.internal.SecurityFilter.doFilter(SecurityFilter.java:59)
at org.eclipse.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1338)
at org.eclipse.jetty.servlet.ServletHandler.doHandle(ServletHandler.java:484)
at org.eclipse.jetty.server.session.SessionHandler.doHandle(SessionHandler.java:231)
at org.eclipse.jetty.server.handler.ContextHandler.doHandle(ContextHandler.java:1065)
at org.eclipse.jetty.servlet.ServletHandler.doScope(ServletHandler.java:413)
at org.eclipse.jetty.server.session.SessionHandler.doScope(SessionHandler.java:192)
at org.eclipse.jetty.server.handler.ContextHandler.doScope(ContextHandler.java:999)
at org.eclipse.jetty.server.handler.ScopedHandler.handle(ScopedHandler.java:117)
at org.eclipse.jetty.server.handler.HandlerWrapper.handle(HandlerWrapper.java:111)
at org.eclipse.jetty.server.Server.handle(Server.java:350)
at org.eclipse.jetty.server.AbstractHttpConnection.handleRequest(AbstractHttpConnection.java:454)
at org.eclipse.jetty.server.AbstractHttpConnection.content(AbstractHttpConnection.java:900)
at org.eclipse.jetty.server.AbstractHttpConnection$RequestHandler.content(AbstractHttpConnection.java:954)
at org.eclipse.jetty.http.HttpParser.parseNext(HttpParser.java:851)
at org.eclipse.jetty.http.HttpParser.parseAvailable(HttpParser.java:235)
at org.eclipse.jetty.server.AsyncHttpConnection.handle(AsyncHttpConnection.java:77)
at org.eclipse.jetty.io.nio.SelectChannelEndPoint.handle(SelectChannelEndPoint.java:606)
at org.eclipse.jetty.io.nio.SelectChannelEndPoint$1.run(SelectChannelEndPoint.java:46)
at org.eclipse.jetty.util.thread.QueuedThreadPool.runJob(QueuedThreadPool.java:603)
at org.eclipse.jetty.util.thread.QueuedThreadPool$3.run(QueuedThreadPool.java:538)
at java.lang.Thread.run(Thread.java:811) -
500 Internal server error while running sqlsrv_query in PHP
Hello everyone I am having a problem with sqlsrv_query I will be grateful to you please provide some help.
I am running a query through php:
$ls_parcel_query = "select * from ParcelDetail order by ExtractDate";
$result = sqlsrv_query($conn, $ls_parcel_query, array(), array("Scrollable"=>"keyset","QueryTimeout"=>300));
$no_of_rows = sqlsrv_num_rows($result);
echo "<br/>".$no_of_rows;
It gives (After 30 seconds):
500 - Internal server error.
There is a problem with the resource you are looking for, and it cannot be displayed.
I have php.ini settings like below:
max_execution_time = 90
memory_limit = 128M
While running this query in SQL SERVER 2008 R2, it successfully gives result in some times in 1 minute and sometimes in 2 minutes.Hello,
A 500 Error will be caused due to many reason.To troubleshooting this issue, you can try to check out the error log and get more information on what is causing the error.
Reference :
"500 Internal Server Error" while running PHP
HTTP Error 500 Internal server for php pages and solution
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support -
Error 500--Internal Server Error while opening a taskflow in inline popup
Hi,
I am getting "Error 500--Internal Server Error" while opening a bounded taskflow as a popup from another bounded taskflow containing page fragments. The popup taskflow contains jspx pages. I even removed the jspx pages from the popup taskflow to check if the error is resulting from the bindings on the pages but still I get the same error. The entire stack trace of the error in the popup dialog is :
Error 500--Internal Server Error
oracle.adf.controller.ControllerException: ADFC-04008: The BindingContext on the session is null.
at oracle.adfinternal.controller.util.Utils.createAndLogControllerException(Utils.java:208)
at oracle.adfinternal.controller.util.model.AdfmUtil.getBindingContext(AdfmUtil.java:47)
at oracle.adfinternal.controller.util.model.DCFrameImpl.makeCurrent(DCFrameImpl.java:125)
at oracle.adfinternal.controller.state.ViewPortContextImpl.makeCurrent(ViewPortContextImpl.java:1006)
at oracle.adfinternal.controller.state.RequestState.setCurrentViewPortContext(RequestState.java:159)
at oracle.adfinternal.controller.state.ControllerState.setRequestState(ControllerState.java:900)
at oracle.adfinternal.controller.state.ControllerState.synchronizeStatePart1(ControllerState.java:355)
at oracle.adfinternal.controller.application.SyncNavigationStateListener.beforePhase(SyncNavigationStateListener.java:105)
at oracle.adfinternal.controller.lifecycle.ADFLifecycleImpl$PagePhaseListenerWrapper.beforePhase(ADFLifecycleImpl.java:551)
at oracle.adfinternal.controller.lifecycle.LifecycleImpl.internalDispatchBeforeEvent(LifecycleImpl.java:100)
at oracle.adfinternal.controller.lifecycle.LifecycleImpl.dispatchBeforePagePhaseEvent(LifecycleImpl.java:147)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$PhaseInvokerImpl.dispatchBeforePagePhaseEvent(ADFPhaseListener.java:112)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.beforePhase(ADFPhaseListener.java:59)
at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.beforePhase(ADFLifecyclePhaseListener.java:44)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:258)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Any help is greatly appreciated.
Thanks,
KKHi Frank,
Thanks for the reply. I am using it as an inline popup. I am trying to create command links dynamically in an iterator. When a link is clicked a popup window opens. The text of the link is passed to the popup window by creating a variable in the session scope ( I even tried request scope) by an action listener in the backing bean.
I tried to create another simple application with a static command button which passes its text to popup window through a session scope variable. It worked fine. I am not sure why the same procedure is not working in my original application. Can you give me a hint what could possibly go wrong according the exception stack trace ?
Thanks,
KK -
Hi
I am using a WSDL in my java code by creating proxy.
I am getting an exception on below line of code
XX_RESPONSE res = port.XX_XX_Forecast(req);
exception :
javax.xml.rpc.soap.SOAPFaultException: "Server Error"
hat could be the possibility.
is it from XI side or Java side.
Shall I catch a XI person on my floor to solve this !!
To be more specific :
Error is
<detail xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
<context>XIAdapter</context>
<code>ADAPTER.JAVA_EXCEPTION</code>
<text>com.sap.aii.af.service.cpa.CPAException: invalid channel (party:service:channel) = <null>
at com.sap.aii.af.mp.soap.web.MessageServlet.getChannel(MessageServlet.java:499)
at com.sap.aii.af.mp.soap.web.MessageServlet.doPost(MessageServlet.java:409)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:215)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)</text>
</s:SystemError>
</detail>
ThanksHi...
WSDL forwarded by my manager was wong
I tested it and it threw same exception.
nyways...1 more help..
Now, is there any way in NWDS to replace contents of used WSDL.
Because only 1 "=" is missing in WSDL..
Thanks
Maybe you are looking for
-
Hi All , I am working on one custom Order Mangement ADF Application which integrates with EBiz R12.2.3. We are trying to get the Ebiz userid ,username,Responsibility ID and Application ID in ADF through below Code public HashMap checkEBSSessio
-
HT4623 why wont my iphone allow me to purchase any apps
my account settings on my iphone 5 keep telling me to contact itune support to complete a transaction. Any help?
-
Error on opening a numbers file.
I get the following error when opening a file in Numbers '09: Missing File - thumbs/style-thumbail-Basic.tiff This is in the 'Document Warnings' dialog. How can I go about correcting this error? Thanks, David
-
What is the significance of 'Irrelevant' column in SWWUSERWI
Hi, I wanted to know why do we have a column 'Irrelevant'(i.e. NO_SEL) in SWWUSERWI What is the use of it? What is the meaning if it market 'X'? Please can someone tell this to me? With Regards, Vimal
-
EASY Question - But Hard for the Actioscript inept
Ok, So this is my first attempt at making a web page... I am trying to simply make my little button display my movie labeled "Content", I don't think I am doing somthing right... Doh.... I have diffrent movies (p1 & p2) for button rollover effects...