Luxadm probe / Could not find the loop address for the device at physical path

Using EMC FibreChannel Disks on a Solaris 10
# luxadm probe
No Network Array enclosures found in /dev/es
Error: Could not find the loop address for the device at physical path.
# echo $?
255
Any ideas how to fix?
Thank,
Marcel

Hi Marcel,
Which Solaris 10 release is this?
I found a very old bug that says this problem is already fixed in Solaris 10 although the bug description says
its mostly seen on Solaris 8 and 9.
https://bug.oraclecorp.com/pls/bug/webbug_print.showbug?c_rptno=15123550
The bug says that these errors are displayed when StorADE 2.1 is running its rasagent cron job, which executes a luxadm display.
This process runs in the background so the user is not aware that another luxadm display process is running.
Work-around: Do not run Storade rasagent cron job at same time as another luxadm display process.
I hope this might help to debug this problem but I puzzled why this might be happening if its already fixed.
Let me know if the workaround helps or so I can follow-up with the right support team.
Thanks, Cindy

Similar Messages

XML Template could not find error when submitting for other than English

Hi All,
When I try to submit my custom xml report through SRS window, in NON english language, I get following error
"The simultaneous application program could not find an xml template for the program. Check the configuration of the data and information medianate template for the program administrator the responsibility to xml editor" --- (Transalted from spanish message by me)
and then giving FRM-41072:can not create the group req_layout
error.
I have other xml report for which I have no this type of problem
Please help me.
Edited by: DharV on Oct 30, 2011 10:42 PM

Hi,
I have a template created using UI Shell and have 2 fragments being used as a dynamic region. So far so good. All is well and when i run the application i can see the regions.
Don't know what this has to do with the problem and its solution. Its confusing.
Now i created a custom template (.jspx) file and tried to use the same fragments in this template.
Assume you meant that you used the same task flow reference - correct ?
If you set definition="public" , does it make a difference ?
Frank

Could´nt find a camera profile for the M9.

I have just bought a Leica M9 but I could not find a camera profile for the M9. In the folder "application support/adobe/camera raw/" there is only a profile for the M8. Do I simply not see the profile or is there none. I am using Lightroom 4.4. and Camerea Raw 7.6. on a Mac.

It isn’t on the list but it produces DNGs with an embedded camera profile so it wouldn’t need any specific support from Adobe, I don’t think, so maybe they didn’t feel the need.
If you download the sample DNGs from KenRockwell, you’ll see an Embedded and an Adobe Standard camera profile, which don’t appear to be different because switching between them produces only the tiniest variation in the histogram. If something equivalent to Adobe Standard is already embedded in the camera’s DNGs that there wouldn’t be any other Camera-this or Camera-that profiles to match, hence only Adobe Standard is supplied.
http://www.kenrockwell.com/leica/m9/sample-photos-3.htm

WCF Published Orch - Could not find a base address that matches scheme http for the endpoint with binding MetadataExchangeHttpBinding

I have an orchestration published as a web service. It was working fine on our test environment, we deployed to production, and now getting this error. The website wouldn't go in the BizTalk MSI, so we copied the files. We reset the Authentication
to match the test system (we are using Basic Auth).
When we try to browse the webservice in the browser, it prompt for userid/password, we enter it, then it gives the following error.
I'm not even sure what it means by "base address", if URL was https://prod.mydomain.com/myapp/myservice.svc, would https://prod.mydomain.com be the based address? In the test environment, the URL is https://test.mydomain.com/myapp/myservice.svc.
In both environments, we have a customer calling this webservice.
Also, I don't know what it means "scheme http". We are using https:... on the URL.
I'm thinking this is either security related, something to do with the app pool being different, or maybe something to do with bindings.
Thanks,
Neal Walter
http://MyLifeIsMyMessage.net
Web.config:
    <services>
      
      <service name="Microsoft.BizTalk.Adapter.Wcf.Runtime.BizTalkServiceInstance" behaviorConfiguration="ServiceBehaviorConfiguration">
        <endpoint name="HttpMexEndpoint" address="mex" binding="mexHttpBinding" bindingConfiguration="" contract="IMetadataExchange" />
        
      </service>
    </services>
</system.serviceModel>
    <system.webServer>
        <security>
            <authorization>
                <remove users="*" roles="" verbs="" />
                <add accessType="Allow" users="myCustomer" />
            </authorization>
        </security>
    </system.webServer>
Server Error in '/eSecuritelIn' Application.
Could not find a base address that matches scheme http for the endpoint with binding MetadataExchangeHttpBinding. Registered
base address schemes are [https].
Description:
An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the
code. Exception Details: System.InvalidOperationException: Could not find a base address that matches scheme http for the endpoint with binding MetadataExchangeHttpBinding. Registered base address schemes are [https].
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using
the exception stack trace below.
Stack Trace:
[InvalidOperationException: Could not find a base address that matches scheme http for the endpoint with binding MetadataExchangeHttpBinding. Registered base address schemes
are [https].]
   System.ServiceModel.ServiceHostBase.MakeAbsoluteUri(Uri relativeOrAbsoluteUri, Binding binding, UriSchemeKeyedCollection baseAddresses) +16582113
   System.ServiceModel.Description.ConfigLoader.LoadServiceDescription(ServiceHostBase host, ServiceDescription description, ServiceElement serviceElement, Action`1
addBaseAddress) +1082
   System.ServiceModel.ServiceHostBase.ApplyConfiguration() +156
   System.ServiceModel.ServiceHostBase.InitializeDescription(UriSchemeKeyedCollection baseAddresses) +215
   System.ServiceModel.ServiceHost..ctor(Object singletonInstance, Uri[] baseAddresses) +400
   Microsoft.BizTalk.Adapter.Wcf.Runtime.WebServiceHost`3..ctor(IsolatedReceiverType isolatedReceiver, BizTalkServiceInstance serviceInstance, Uri[] baseAddresses)
+36
   Microsoft.BizTalk.Adapter.Wcf.Runtime.WebServiceHostFactory`3.CreateServiceHost(String constructorString, Uri[] baseAddresses) +533
   System.ServiceModel.HostingManager.CreateService(String normalizedVirtualPath) +1413
   System.ServiceModel.HostingManager.ActivateService(String normalizedVirtualPath) +50
   System.ServiceModel.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath) +1172
[ServiceActivationException: The service '/eSecuritelIn/eSecuritelIn_OrchPublished_RepairEquipmentService.svc' cannot be activated due to an exception during compilation.
The exception message is: Could not find a base address that matches scheme http for the endpoint with binding MetadataExchangeHttpBinding. Registered base address schemes are [https]..]
   System.Runtime.AsyncResult.End(IAsyncResult result) +901424
   System.ServiceModel.Activation.HostedHttpRequestAsyncResult.End(IAsyncResult result) +178702
   System.Web.AsyncEventExecutionStep.OnAsyncEventCompletion(IAsyncResult ar) +107
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET
Version:4.0.30319.272

When you want to migrate Web Applications from one environment to other there are multiple ways to achieve it.
1) Migrate in MSI- Export MSI and select the option for your Web Application, however I don't recommend this option
2) Is to browse the folder for Web Application(Right click on web app and browse). Copy this folder(normally within inetpub folder) and take it to the inetpub folder of other environment. Later from the IISManager create application.
Are you not using the same Binding file?
Check you web.config file and see if the endpoint is configured for mexHTTpBinding.
Old: binding="mexHttpBinding"
New: binding="mexHttpsBinding"
web.config snippet:
<services>
<service behaviorConfiguration="ServiceBehavior" name="LIMS.UI.Web.WCFServices.Accessioning.QuickDataEntryService">
<endpoint behaviorConfiguration="AspNetAjaxBehavior" binding="webHttpBinding" bindingConfiguration="webBinding"
contract="LIMS.UI.Web.WCFServices.Accessioning.QuickDataEntryService" />
<endpoint address="mex" binding="mexHttpsBinding" contract="IMetadataExchange" />
</service>
Also look into the below article- How to fix: "Could not find a base
address that matches scheme http for the endpoint with binding WebHttpBinding" Errors
Moving to https = Could not find a base address that matches scheme
Thanks,
Prashant
Please mark this post accordingly if it answers your query or is helpful.

Exchange 2010 Free busy not working from remote site to main site "exception message is: Could not find a base address"

Hi all , I have an exchange 2010 SP 2 environment with 2 sites , the remote site FL free busy has NEVER worked and I get this error on the remote site , is this related ?
thanks
Log Name: Application
Source: System.ServiceModel 3.0.0.0
Date: :
Event ID: 3
Task Category: WebHost
Level: Error
Keywords: Classic
User: SYSTEM
Computer: FL-CAS1.WOMBAT.LOCAL
free bust works from WITHIN the remote (FL ) site , but NEVER to the main (WASH) site , it has Never worked ,I am thing that this error is related
thanks I have no idea how to fix
Description:
WebHost failed to process a request.
Sender Information: System.ServiceModel.ServiceHostingEnvironment+HostingManager/17256489
Exception: System.ServiceModel.ServiceActivationException:
The service '/EWS/exchange.asmx' cannot be activated due to an exception during compilation. The exception message is: Could not find a base address that matches scheme http for the endpoint with binding CustomBinding. Registered base address schemes
are [https].. ---> System.InvalidOperationException:
Could not find a base address that matches scheme http for the endpoint with binding
++++

Hi
This issue could be with corruption in Autodiscover and web services virtual directory
Replace Web.config file for Autodiscover and web services virtual directory from the other working site
Delete and Recreate Autodiscover and web services virtual directory
Do this only on the affected site
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP)

Getting a "Could not find a base address that matches scheme net.tcp"

I've written several WCF services which use HTTP (and its variants). Now I'm trying to learn how to write a WCF service which will use TCP. I'm using Andrew Troelsen's book, "Pro C# 2008 and the .NET 3.5 Platform" as a guide (chapter 25). I've asked questions related to this before on a much more complicated WCF service, so I decided to write a simple WCF service to learn how to do it, rather than work on my more complicated WCF service. Coincidentally I chose the same routine as Troelsen did in his book, although in my case I called the WCF service SimpleAdd.
Anyway, after writing the WCF service, I then wrote the Windows Service to host it. I then installed it, and the installation went fine. When I tried to run the service, the service started but then immediately stopped. I checked the event log and found the following message in it:
"Service cannot be started. System.InvalidOperationException: Could not find a base address that matches scheme net.tcp for the endpoint with binding MetadataExchangeTcpBinding. Registered base address schemes are [http]."
Here's the interface code for my SimpleAdd:
using System;
using System.Collections.Generic;
using System.Linq;
using System.Runtime.Serialization;
using System.ServiceModel;
using System.Text;
namespace SimpleAdd
    // NOTE: If you change the interface name "IService" here, you must also update the reference to "IService" in App.config.
    [ServiceContract]
    public interface IService
        [OperationContract]
        int Add(int FirstNumber, int SecondNumber);
Here's the code for the implementation (I'm leaving out the using statements):
namespace SimpleAdd
    // NOTE: If you change the class name "Service" here, you must also update the reference to "Service" in App.config.
    public class Service : IService
        #region IService Members
        int IService.Add(int FirstNumber, int SecondNumber)
            return (FirstNumber + SecondNumber);
        #endregion
And here's the App.Config file for the service:
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
  <system.web>
    <compilation debug="true" />
  </system.web>
  
  <system.serviceModel>
    <services>
      <service behaviorConfiguration="SimpleAdd.ServiceBehavior" name="SimpleAdd.Service">
        <clear />
        <endpoint binding="wsHttpBinding" contract="SimpleAdd.IService"
          listenUriMode="Explicit">
          <identity>
            <dns value="localhost" />
            <certificateReference storeName="My" storeLocation="LocalMachine"
              x509FindType="FindBySubjectDistinguishedName" />
          </identity>
        </endpoint>
        <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"
          listenUriMode="Explicit">
          <identity>
                        
          </identity>
        </endpoint>
        <endpoint address="net.tcp://localhost/SimpleAdd/" binding="netTcpBinding"
          bindingConfiguration="" contract="SimpleAdd.IService" />
        <host>
          <baseAddresses>
            <add baseAddress="http://localhost:8731/Design_Time_Addresses/SimpleAdd/Service/" />
          </baseAddresses>
        </host>
      </service>
    </services>
    <behaviors>
      <serviceBehaviors>
        <behavior name="SimpleAdd.ServiceBehavior">
          <serviceMetadata httpGetEnabled="true" />
          <serviceDebug includeExceptionDetailInFaults="false" />
        </behavior>
      </serviceBehaviors>
    </behaviors>
  </system.serviceModel>
</configuration>
I don't think it will matter much, because I believe the problem probably lies in the App.config file for the Windows service, but just in case, here's the code for the AddWinService (without the using statements):
namespace WindowsAddService
    public partial class AddWinService : ServiceBase
        //A member variable of type ServiceHost.  (I'm using the "Pro C# 2008" book as reference for this.)
        private ServiceHost myHost;
        public AddWinService()
            InitializeComponent();
        protected override void OnStart(string[] args)
            //just to be really safe
            if (myHost != null)
                myHost.Close();
                myHost = null;
            //create the host
            myHost = new ServiceHost(typeof(SimpleAdd.Service));    //I've included the class from SimpleAdd, which isn't in the book!!!
            //open the host
            myHost.Open();
        protected override void OnStop()
            //shut down the host
            if (myHost != null)
                myHost.Close();
And lastly, here is the App.Config file from my AddWinService:
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
    <system.serviceModel>
        <client>
            <endpoint address="net.tcp://localhost/SimpleAdd"
                                binding="netTcpBinding"
                                contract="SimpleAdd.IService"
                                name="netTcpBinding_IService" />
        </client>
        <services>
            <service name="SimpleAdd.Service"
                             behaviorConfiguration="SimpleAddMEXBehavior">
                
                <endpoint address="mex"
                                    binding="mexTcpBinding"
                                    contract="IMetadataExchange" />
                <host>
                    
                    <baseAddresses>
                        <add baseAddress="http://localhost:8731/Design_Time_Addresses/SimpleAdd/Service/" />
                    </baseAddresses>
                </host>
            </service>
        </services>
        <behaviors>
            <serviceBehaviors>
                <behavior name="SimpleAddMEXBehavior">
                    <serviceMetadata httpGetEnabled="true" />
                </behavior>
            </serviceBehaviors>
        </behaviors>
    </system.serviceModel>
</configuration>
So, where have I gone wrong?
Rod

Hello Richard,
Well, I've tried making the change to the MEX point for net.tcp, but now when I try to start the service I get the following error in the event log:
Service cannot be started. System.InvalidOperationException: Service 'SimpleAdd.Service' has zero application (non-infrastructure) endpoints. This might be because no configuration file was found for your application, or because no service element matching the service name could be found in the configuration file, or because no endpoints were defined in the service element.
I am sure the problem lies with what I've put into the app.config file. My app.config file now looks like this:
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
    <system.serviceModel>
        <client>
            <endpoint address=""
                                binding="netTcpBinding"
                                contract="SimpleAdd.IService"
                                name="netTcpBinding_IService" />
        </client>
        <services>
            <service name="SimpleAdd.Service"
                             behaviorConfiguration="SimpleAddMEXBehavior">
                
                <endpoint address="mex"
                                    binding="mexTcpBinding"
                                    contract="IMetadataExchange" />
                <host>
                    
                    <baseAddresses>
                        <add baseAddress="net.tcp://localhost/SimpleAdd" />
                    </baseAddresses>
                </host>
            </service>
        </services>
        <behaviors>
            <serviceBehaviors>
                <behavior name="SimpleAddMEXBehavior">
                    <serviceMetadata httpGetEnabled="false" />
                </behavior>
            </serviceBehaviors>
        </behaviors>
    </system.serviceModel>
</configuration>
I've also tried using this for the <client> tag under <system.serviceModel>:
<client>
   <endpoint address="net.tcp://localhost/SimpleAdd"
         binding="netTcpBinding"
    contract="SimpleAdd.IService"
    name="netTcpBinding_IService" />
</client>
But that gives me the same error in the event log.
So, what have I done wrong now?
Rod

I recently updated to the OSX 10.8.3 Operating Sistem. I am writing a book and now cannot open any word document I've created. Could not find a newer version of the Microsoft Word Processing Program. Is Pages the next thing? Can I recover my documents?

I recently updated to the OSX 10.8.3 Operating Sistem. I am writing a book and now cannot open any word document I've created with the old system. Could not find a newer version of the Microsoft Word Processing Program. Is Pages the next thing? Can I recover my documents? How?

I'm in the same boat: new to OS X and Mac, and in the middle of a book. I switched because I heard about the the ease of using Mac, but so far, for me, it's been a nightmare. I bought 2011 Office Mac and hate everything about it, the most recent being the inability to open or cut or paste any of my original word files. I understand that this could have easily been done with earlier versions, but not Mountain Lion (which I learned is what OSX is.) Since I work with language, I am amazed at the assumptions of the Apple community. It helps to use common language and explain even the basics.
So all the helpful hints to use the latest version of Office Mac are to no avail. Now what?

Trying to make a bootable disc but i keep getting this message as a failure notice. "Could not find any scan information. The source image needs to be imagescanned before it can be restored.", what can I do?

Trying to make a bootable disc but i keep getting this message as a failure notice. "Could not find any scan information. The source image needs to be imagescanned before it can be restored.", what can I do? Any help at all would be appreciated.

Have you tried scanning the source image? Disk Utility > Images menu > Scan Image for Restore…

Could not find a Handler associated with the following type

i keep randomly getting this error in some of my managed devices.
Could not find a Handler associated with the following type: printer policy.
Does anyone have any clue about this?
Thanks in advance.
Here are the log messages:
[DEBUG] [01/10/2012 11:27:46.218] [1736] [ZenworksWindowsService] [5] [] [Policy Handler Registration Module] [] [Begining to register policy handlers.] [] []
[DEBUG] [01/10/2012 11:27:46.437] [1736] [ZenworksWindowsService] [5] [] [Policy Handler Registration Module] [] [Registering handlers for Policy Handler Registration Module] [] []
[DEBUG] [01/10/2012 11:27:46.437] [1736] [ZenworksWindowsService] [5] [] [Policy Handler Registration Module] [] [Configuration file C:\Program Files\Novell\ZENworks\conf\PolicyHandlersRegistrat ion.xml] [] []
[DEBUG] [01/10/2012 11:27:47.062] [1736] [ZenworksWindowsService] [5] [] [Policy Handler Registration Module] [] [Deserialized 5 handlers] [] []
[DEBUG] [01/10/2012 11:27:47.062] [1736] [ZenworksWindowsService] [5] [] [Policy Handler Registration Module] [] [Got 5 valid handlers to register.] [] []
[DEBUG] [01/10/2012 11:27:47.078] [1736] [ZenworksWindowsService] [5] [] [Policy Handler Registration Module] [] [Loading handler assembly: C:\Program Files\Novell\ZENworks\bin\handlers\launcherconfig. dll] [] []
[DEBUG] [01/10/2012 11:27:47.171] [1736] [ZenworksWindowsService] [5] [] [Policy Handler Registration Module] [] [Registering launcher configuration policy with ActionManager.] [] []
[DEBUG] [01/10/2012 11:27:47.171] [1736] [ZenworksWindowsService] [5] [] [Policy Handler Registration Module] [] [register handler for launcher configuration policy returning True] [] []
[DEBUG] [01/10/2012 11:27:47.171] [1736] [ZenworksWindowsService] [5] [] [Policy Handler Registration Module] [] [Loading handler assembly: C:\Program Files\Novell\ZENworks\bin\handlers\WindowsGroupPol icyPlural.dll] [] []
[DEBUG] [01/10/2012 11:27:47.296] [1736] [ZenworksWindowsService] [5] [] [Policy Handler Registration Module] [] [Registering grouppolicy with ActionManager.] [] []
[DEBUG] [01/10/2012 11:27:47.296] [1736] [ZenworksWindowsService] [5] [] [Policy Handler Registration Module] [] [register handler for grouppolicy returning True] [] []
[DEBUG] [01/10/2012 11:27:47.296] [1736] [ZenworksWindowsService] [5] [] [Policy Handler Registration Module] [] [Loading handler assembly: C:\Program Files\Novell\ZENworks\bin\handlers\Printerenf.dll] [] []
[DEBUG] [01/10/2012 11:27:47.390] [1736] [ZenworksWindowsService] [5] [] [printer policy] [] [Creating wrapper] [] []
[DEBUG] [01/10/2012 11:27:47.500] [1736] [ZenworksWindowsService] [5] [] [printer policy] [] [Exception while creating Providers
Exception Details: The type initializer for 'Novell.Zenworks.PolicyHandlers.PrinterPolicy.Zenw orksPrinterProviderPINVOKE' threw an exception.
at Novell.Zenworks.PolicyHandlers.PrinterPolicy.Zenwo rksPrinterProviderPINVOKE.new_PrinterProvider()
at Novell.Zenworks.PolicyHandlers.PrinterPolicy.Print erProviderWrapper.GetProvider(ILoggerWrapper logger)] [] []
[DEBUG] [01/10/2012 11:27:47.515] [1736] [ZenworksWindowsService] [5] [] [printer policy] [] [Exception in Handler constructor
Exception Details: The type initializer for 'Novell.Zenworks.PolicyHandlers.PrinterPolicy.Zenw orksPrinterProviderPINVOKE' threw an exception.
at Novell.Zenworks.PolicyHandlers.PrinterPolicy.Print erProviderWrapper.GetProvider(ILoggerWrapper logger)
at Novell.Zenworks.PolicyHandlers.PrinterPolicy.Print erPolicyHandler..ctor()] [] []
[DEBUG] [01/10/2012 11:27:47.515] [1736] [ZenworksWindowsService] [5] [] [Policy Handler Registration Module] [] [Exception occurred while registering handler printer policy. Exception details: Exception has been thrown by the target of an invocation.] [] []
[DEBUG] [01/10/2012 11:27:47.515] [1736] [ZenworksWindowsService] [5] [] [Policy Handler Registration Module] [] [Inner Exception details: The type initializer for 'Novell.Zenworks.PolicyHandlers.PrinterPolicy.Zenw orksPrinterProviderPINVOKE' threw an exception.] [] []
[DEBUG] [01/10/2012 11:27:47.515] [1736] [ZenworksWindowsService] [5] [] [Policy Handler Registration Module] [] [register handler for printer policy returning False] [] []
[DEBUG] [01/10/2012 11:27:47.515] [1736] [ZenworksWindowsService] [5] [] [Policy Handler Registration Module] [] [Loading handler assembly: C:\Program Files\Novell\ZENworks\bin\handlers\browserbookmark senf.dll] [] []
[DEBUG] [01/10/2012 11:27:47.531] [1736] [ZenworksWindowsService] [5] [] [browserbookmarkspolicy] [] [Entered the constructor] [] []
[DEBUG] [01/10/2012 11:27:47.531] [1736] [ZenworksWindowsService] [5] [] [Policy Handler Registration Module] [] [Registering browserbookmarkspolicy with ActionManager.] [] []
[DEBUG] [01/10/2012 11:27:47.531] [1736] [ZenworksWindowsService] [5] [] [Policy Handler Registration Module] [] [register handler for browserbookmarkspolicy returning True] [] []
[DEBUG] [01/10/2012 11:27:47.531] [1736] [ZenworksWindowsService] [5] [] [Policy Handler Registration Module] [] [Loading handler assembly: C:\Program Files\Novell\ZENworks\bin\handlers\dluenf.dll] [] []
[DEBUG] [01/10/2012 11:27:47.671] [1736] [ZenworksWindowsService] [5] [] [Policy Handler Registration Module] [] [Registering dlu policy with ActionManager.] [] []
[DEBUG] [01/10/2012 11:27:47.671] [1736] [ZenworksWindowsService] [5] [] [Policy Handler Registration Module] [] [register handler for dlu policy returning True] [] []
[DEBUG] [01/10/2012 11:27:47.984] [1736] [ZenworksWindowsService] [5] [] [MessageLogger] [] [Unable to write to event log (Application) using source (Novell.Zenworks.Logger) Exception: System.ComponentModel.Win32Exception: The event log file is full
at System.Diagnostics.EventLog.InternalWriteEvent(UIn t32 eventID, UInt16 category, EventLogEntryType type, String() strings, Byte() rawData, String currentMachineName)
at System.Diagnostics.EventLog.WriteEntry(String message, EventLogEntryType type, Int32 eventID, Int16 category, Byte() rawData)
at System.Diagnostics.EventLog.WriteEntry(String source, String message, EventLogEntryType type, Int32 eventID, Int16 category, Byte() rawData)
at System.Diagnostics.EventLog.WriteEntry(String source, String message, EventLogEntryType type, Int32 eventID)
at log4net.Appender.EventLogAppender.Append(LoggingEv ent loggingEvent)] [] []
[ERROR] [01/10/2012 11:27:47.671] [1736] [ZenworksWindowsService] [5] [] [Policy Handler Registration Module] [EXTENSIONUTILS.RegistrationModule.FailedRegistrati onMessage] [The following modules could not be registered: printer policy. The configurations of these types would not be applied on this device.] [] []
[DEBUG] [01/10/2012 11:27:47.984] [1736] [ZenworksWindowsService] [5] [] [Policy Handler Registration Module] [] [Completed registration of policy handlers.] [] []
[DEBUG] [01/10/2012 11:27:47.984] [1736] [ZenworksWindowsService] [5] [] [ModuleLoader] [] [Start() for module com.novell.zenworks.module.policyhandlerregistrati onmodule returned successfully] [] []
[DEBUG] [01/10/2012 11:27:47.984] [1736] [ZenworksWindowsService] [5] [] [ModuleLoader] [] [Before calling Initialize() for module com.novell.zenworks.module.remotemanagement at path C:\Program Files\Novell\ZENworks\bin\modules\Novell.Zenworks. RMModule.dll] [] []
[DEBUG] [01/10/2012 11:27:48.046] [1736] [ZenworksWindowsService] [5] [] [ModuleLoader] [] [Initialize() for module com.novell.zenworks.module.remotemanagement returned successfully] [] []
[DEBUG] [01/10/2012 11:27:48.046] [1736] [ZenworksWindowsService] [5] [] [ModuleLoader] [] [Before calling Start() for module com.novell.zenworks.module.remotemanagement at path C:\Program Files\Novell\ZENworks\bin\modules\Novell.Zenworks. RMModule.dll] [] []
[DEBUG] [01/10/2012 11:27:48.046] [1736] [ZenworksWindowsService] [5] [] [Remote Management Module] [] [(RMMODULE_DEBUG)Initialized(RMMODULE_DEBUG)] [] []
[DEBUG] [01/10/2012 11:27:48.078] [1736] [ZenworksWindowsService] [5] [] [Remote Management Module] [] [(RMMODULE_DEBUG) Adding Property Pages (RMMODULE_DEBUG)] [] []
[DEBUG] [01/10/2012 11:27:48.078] [1736] [ZenworksWindowsService] [5] [] [PolicyManager] [] [Entered PolicyManager.RegisterComponent] [] []
[DEBUG] [01/10/2012 11:27:48.078] [1736] [ZenworksWindowsService] [5] [] [PolicyManager] [] [Registered the component remotemgmt] [] []
[DEBUG] [01/10/2012 11:27:48.109] [1736] [ZenworksWindowsService] [5] [] [Remote Management Module] [] [(RMMODULE_DEBUG)Trying to START service in Start Method (RMMODULE_DEBUG)] [] []

matos02,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

ACL migration Error : 1210 could not find a domain controller for domain "Test Domain" (Old Domain)

Hi
We are migrating from old domain to new domain. Before live migration, we are trying to check the ACE/ACL migration through SubInACL. We are running the SubInACL on a cluster, which is a member of the Old Domain (Test Domain). We are able to resolve and
ping both Old Domain and the New domain from this cluster machine. We have created a network share on this cluster, which is accessible to all Domain Users of the Old Domain. Both Domains have two way forest level trust. we are trying to migrate
the ACL of this share (\\ClusterMachine\testshare$) to the new domain using SubInACL. We are trying to run the below command to get it done.
subinacl /outputlog=C:\Users\Administrator\Desktop\Migrationlog.txt /subdirectories
\\ClusterMachine\testshare$\*.* /migratetodomain=OldDomain=NewDomain=mappingfile.txt
Mapping file contains : Domain Users=NewDomain_Users
But we are geeting the Error that "1210 could not find a domain controller for domain "Test Domain". Error finding domain name : 1210 the format of the specified computer name is invalid. Current Object "\\ClusterMachine\testshare$"
will not be processed."

Hello,
how in detail is DNS set up in each domain?
Any problems when using nslookup to verify?
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

Could not find network adapter needed for registration

Cisco IP Communicator has worked well for a month now. One morning I go to launch the app and I get the error message: Could not find network adapter needed for registration. I rebooted my pc and I got the same result. I reinstalled the app and got the same results. I don't know what if anything changed, but I know I can't even get the application to load to look at any settings. PLEASE HELP!!!
Brian C

Hi Brian,
Have a look at this good thread :)
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Telephony&topicID=.ee6c829&fromOutline=&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.2cc0bb6f
Hope this helps!
Rob

"could not get an output file for the document (error RWI 00314)"

Hi
We are getting the following error when running the Webi Reports "could not get an output file for the document (error RWI 00314)". The issue seems to be related to Tomcat Memory Heap size, our Tomcat Java heap Size is 1024MB. We were able to resolve the issue by restarting the Tomcat. We cannot restart the Tomcat in Prod if this is happening frequently.
Can some one please suggest any other solution other than restarting the Tomcat frequently, our platform is BOBJ XI 3.1 SP3 with FP 3.1 our Wndows OS is 32 Bit.
Thank's for your help

Hi Sreeram,
Earlier i also faced same kind of problem.
To solve this kind of problems you need to shutdown the server.
second thing is when patches missed that time also you will get this kind of problem.
check j2ee connection is it properly working or not?
Regards,
samar reddy.

How do I find the MAC address for the time capsule?

I am trying to install 2T time capsule as my main router. Telus my internet supplier allows me to in install the MAC address for the static ip that I am going to use. But where is the MAC address on the cube or how do I get it?

On the bottom label it should list the MAC address.
If you happen to still run the original.. ie decent airport utility it has all that info right in front of you.
But you see that was before Apple reduced the airport utility to the status of a toy..
Pretty pictures no info.. think kid's book.
See very very pretty.. as a UTILITY though.. useless.

HT2486 How do I remove the grey "contact" selection highlight? This contact always appears as the email address for the group I want to send to.

How do I remove the grey "contact" selection highlight? This contact always appears as the email address for the address book group I want to send to.

The group is "undisclosed" there are 6 contacts in the group. The contacts are listed in 2nd column entitled "name", one of these contacts remains highlighted or selected in grey. I can't remove the grey selection of the contact. When you select the "undisclosed" group as the "to" address the contact highlighted in grey appears in the email address box. The group name should appear in the email box, but it doesn't. This began to happen after I upgraded to IOS 10.6.8. However I'm not sure that has anything to do with the problem? I do not have "show all member addresses selected." Your help is appreciated.

I accidently gave the wrong address for the ipod nano replacement is there any way i can change it?

I accidently gave the wrong address for the ipod nano replacement is there any way i can change it?

The passcode is set on your phone, not by Apple.
If you're in the US, check craigslist for people who fix screens. Here in NY they go for about $80 and they come right to our office and do on the spot.

Luxadm probe / Could not find the loop address for the device at physical path

Similar Messages

Maybe you are looking for