Lvalmark.sys and nitiork.dll caused Blue Screen sometime

Hi Everyone
I am a Labview programmer, debugging Labview 2011 programmes on a WinXP 32bit system.
I recently ecountered this weird situation, that is, Labview system component causes computer crash when I was debugging the code, mostly when I was changing stuff in Block Panel.
By analysing the dump file of windows, I got the following informations.
MODULE_NAME: nitiork
FAULTING_MODULE: 804d7000 nt
DEBUG_FLR_IMAGE_TIMESTAMP: 4d8a0ff6
READ_ADDRESS: b10300d4
CURRENT_IRQL: 1b
FAULTING_IP:
nitiork+6e6b
ac93ee6b ?? ???
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: DRIVER_FAULT
BUGCHECK_STR: 0xD1
LAST_CONTROL_TRANSFER: from 00000000 to 805446f0
STACK_TEXT:
ba4d3b1c 00000000 b10300d4 0000001b 00000000 nt+0x6d6f0
STACK_COMMAND: .bugcheck ; kb
FOLLOWUP_IP:
nitiork+6e6b
ac93ee6b ?? ???
SYMBOL_NAME: nitiork+6e6b
FOLLOWUP_NAME: MachineOwner
IMAGE_NAME: nitiork.dll
I am realy grateful if someone can tell me what to do to avoid crashes happening again, because bluescreen crash on a lab measurement computer is really annoying!

HI,
i did some research and found some similar cases. The solution sounds simple and I hope it works for you. Just install the latest DAQmx Driver and reboot your Computer.
NI-DAQmx 9.9
http://www.ni.com/download/ni-daqmx-9.9/4707/en/
Best Regards,
Gregor

Similar Messages

Skype video crashes my GPU driver and causes blue screen.

Hello,
Installed a new copy of windows and got the latest version of skype for my PC (on wich skype worked just fine, video calls, voice calls, but it was an older version. No hardware changes)
With the new skype, I , for the least, get driver crashes, and for the most, a blue screen, when I just go to options to set up my webcam.As soon as I see the square "loading" my webcam in the options, everything freezes and I get a driver crash or a blue screen.
Current specs:
i5 4440, stock clocks
2x8gb 1333 ddr3 1.5v ram, stock
R7 260x, stock
500w PSU, not the best quality, But I also tried a 1000w platinum PSU, and same resaults.
last error code I remeber from the blue screen was: 0x00000116
I know it is related to the GPU, but it doesn't have power deficiency, since I manage to run heavy games just fine.By the way, my webcam works just fine on different web sites, so it's not the webcam.
What I tried:
-Degrading to the oldest supported version by skype
-Degrading video drivers
-Using different webcams
-Installed all windows 7 64 bit updates
edit:
skype 6.14 works, but newer versions crash my GPU drivers and cause blue screen

I would suggest uninstalling Droidcam as it could be the source of some delays assisting in causing the problem. TDR problems occur when your videocard is unable to respond in 2 seconds for a variety of reasons (heat, tweaks), forcefully resetting the card. Some people increase this delay in their registry from 2 to up to 10 seconds to give the card time to catch up so that a reset doesn't occur. You can try this MS fix it which increases this delay. https://support.microsoft.com/en-us/kb/2665946

QuickTime Causes Blue Screen

When I try to open QuickTime my computer (using XP Professional) crashes and goes to a Blue Screen. On that screen it says a file, dti3duag.dll, (I believe it is an ATI video driver of some sort) caused the crash. This only happens with QuickTime.
To try and remedy this problem I have unistalled QuickTime and reinstalled it. Still doesn't work.
I recently updated the video driver for this computer and the problem started around the same time.
Any help would be appreciated!! Thanks.
Gateway DS 450 X Notebook Windows XP Pro

Sure it's not ati3duag.dll? That's the normal name for an ATI driver. Not that I have a suggestion, I'm afraid, but it's important to get the file names correct so that others have accurate details.
And just a thought; have you tried rolling back that video driver?

IPod Causing Blue Screen of Death on Windows Vista

I'm posting this in the correct forum now:
For some reason, all of a sudden, whenever I plug in or unplug my iPod to my computer, the computer crashes and quickly shows a blue screen of death before restarting. It has not done this before today. I haven't done anything out of the ordinary with the iPod or the computer that would cause it to do this.
When iTunes opened, it said there was a Windows Update to fix a problem with iPods corrupting upon disconnecting from the PC, but when I tried to download the update, it said something about the update not being needed for this system. The iPod isn't corrupted, everything is still on it. I don't know what the deal is.
I tried system restore back to like a week ago, but this did nothing to help.

First, update the USB Root Driver on your computer: http://docs.info.apple.com/article.html?artnum=305136 Even if there are no new drivers for your computer, follow the last part of the article and let Windows update your USB driver.
Second, be sure you are using a rear port on your computer.
Third, with only the iPod, mouse and keyboard connected (no speakers, no mic, nothing else), reassign the drive letter on your iPod. Try M or P or Z: http://docs.info.apple.com/article.html?artnum=93499

Java causes BLUE SCREEN OF DEATH

I am currently running the newest version of the JRE
v. 1.4 update 5
Every time Java runs on my system Windows XP Professional crashes and I get the Blue Screen of Death. I attempted to uninstall Java but that would also crash my system. So I reformated my computer and reinstalled everything again. Still the same thing occurs. Java crashes my system. If I open a webpage with Java, the java plugin in the control pannel, or any app which is java based my system crashes.
I read elsewhere on the internet that setting Hardware acceleration to None will fix the problem. This works, but is not a viable soltution. I need my video hardware to run at full acceleration. What's the deal with JAVA?
System Specs:
OS: Windows XP Professional SP2
System:
- Motherboard ASUS A8N-Deluxe SLI (bios v1013.003)
- AMD 64 FX55 (2.86ghz, 2ghz FSB, 1MB L2 Cache, 1.60volts)
- Corsair XMS XPERT Dual Channel (2)512MB PC 3200 DDR 400mhz, 2.70 volts, memory timings 2, 2, 2, 5, 1T
- Dual eVGA Nvidia 7800GTX PCIe cards 2x(Core 463mhz, Memory 1.29ghz) 1.4volts
- Creative Audigy Gamer 2 ZS Sound Card
- Dual 74gig Raptor Hard Drives SATA150, 10k RPM, 4.5ms seek time, 8MB buf.
- Dual 80gig Maxtor Drives, IDE ATA133, 8MB Buffer, 7200 RPM (storage only)
- 600 Watt Enermax SLI Ready Power Supply
Drivers:
Mobo/Chipset: Nvidia Nforce4 v6.66 release July 15th, 2005
Video: Nvidia Detonator 78.01 release Sept 2, 2005
All device and system drivers are the most up-to-date.

Maybe you should take some reading lessons. That was harsh.
video cards are top-of-the-line
Nvidia 7800GTX KO PCIe. I have two of them in SLISorry I would be so harsh except I am jealous of your system. Maybe you could make another and give it to me.
mode. My Antialiasing and Anisotropic Filtering
settings are as follows:
AA: 8X
AF: 16XBut I already answered your question. I stated in reply 3 with "I bet you have Anti-aliasing and/or Anisoptric Filtering set to something other than application preference".
Would this really cause problems with the JRE? Again if you would read the links I provided. The first one: http://bugs.sun.com/bugdatabase/view_bug.do;:YfiG?bug_id=6267861 will give you the answer. And it is really, really, really, really easy for you to test. Just set your Anti-aliasing and/or Anisoptric Filtering to application preference and see if it works.
The other options is to turn off direct3d by setting an enviromental variable. Start->Control Panel->System->Advanced->Environment Variables->New and then add the approperiate value
Would I enter those Java commands under the Java
Console in the Java Runtime Parameters Field?That might work for Applets and Java Web Start. Try it and see.
I reformated my computer twice.Sorry you had to do that.

Wireless adapter causing blue screen

Hello,About a month ago on my Lenovo Ideapad Z580, I was using the internet when it said I was no longer connected. When I tried troubleshooting, it reset the wireless connection adapter and gave me a blue screen. When it restarted and I tried troubleshootingt it again, it enabled the adapter and worked fine. Since that first time, this BSOD has happened every day, sometimes multiple times a day, but not everytime I am on the internet. I have tried doing a system restore at a few different points, but the restore always ends in an error. I checked at the driver for the wireless adapter is up to date. Please advise on what I can do to fix this problem. Thank you,Stephanie

The symptoms you describe could be symptomatic of a variety of things to include hardware/software issues, overheating caused by a failed processor fan, bad memory (RAM), failing or underpowered power supply, CPU overheating, motherboard, video card, faulty or unsigned device drivers, CMOS battery going bad, BIOS and firmware problems, dirty hardware components, programs hanging or unresponsive in the background, and even malware. If the computer is overheating, it usually begins to shutdown/restart on a more regular basis.
If the machine is only crashing at home after establishing a connection but not at work when establishing a connection, then its probably an issue with your network configuration or something (i.e. wireless adapter) causing a conflict and not a malware issue.
The DRIVER_IRQL_NOT_LESS_OR_EQUAL error is usually due to a bad driver or faulty/incompatible hardware or software. This error condition means that a kernel-mode process or driver tried to access a memory location to which it did not have permission, or at a kernel Interrupt ReQuest Level (IRQL) that was too high.

BB Desktop Software causes Blue Screen at Windows XP

Hi,
I'm using BB Desktop Software 6.1.0.35 at Windows XP over Lenovo X201 laptop. When I try to sync the adressbook or calendar between my BB(Storm II 9520) and my laptop, it often causes blue screen at my laptop.
I tried to uninstall and reinstall the desktop software but the blue screen occures again. But, the same version of Desktop Software at Windows VISTA over HP pavillion Desktop doesn't cause similar problem.
Please kindly let me know how can I fix it or please check if there are any defects at your Desktop Software.
If you need, I can send the screenshot to you via email.
Best Regards,

Just unisntall this version and install the desktop version 5.1. That will not give you blue screen infact it is fully compatible with xp
Need any help please let me know

Schannel errors - appears to be causing blue screens

Hi guys
Every once in a while (a few times a month) our RDS server (server 200r82 hyper-v VM) decides to blue screen and restart.
Each and every time it crashes, we notice hundreds and hundreds of schannel errors appearing just before the crash (event ID 36888)
Well, it did it again this afternoon, and over the last 12 hours we noticed 1008 instances of this error, with 60 odd messages appearing within 0.2 seconds of each other, and 2 minutes before the crash.
I also noticed that just before the crash, there were a handful of services which hung seconds before the logged unexpected shutdown event. These services are as follows.
- UmRDPService
- WPDBusEnum
- UxSMS
- Audio Endpoint Builder
After the crash, it doesnt log any Schannel errors. although, saying this now and just checking again, it looks like its logged 127 instances of the same schannel error, starting from after around 2 hours of bringing the server back online.
Do these Schannel errors cause blue screens/crashes? Or is it something else I should be looking at... I'm at a loss, as there's not a lot more in the way of logs that seem to be telling me what's going on..

Hi EsDood,
Would you please let me know complete message of Event ID
36888? For Event ID 36888, it generally occur if a user tries to access a web site using HTTP but specifies an SSL port in the URL. Please check the Schannel tracing log if find relevant clues.
How to enable Schannel event logging in IIS
Please also refer to following thread and check if can help you.
Schannel
error, Event ID 36888? - IS there a way to Identify what causes Schannel to log error?
In addition, I noticed that a BSOD issue occurred on the Windows Server 2008 R2. Troubleshoot this kind of
kernel crash issue, we need to analyze the crash dump file to narrow down the root cause of the issue. Did you get any dump files? If get, please refer to
KB315263 and check if can help you.
If this issues is a state of emergency for you. Please contact Microsoft Customer Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request, please refer to the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

ITunes causing Blue Screen of Death

Okay, I am running Vista, as it was my only option at the computer store. At random times in iTunes it will freeze and cause the blue screen of death. This is a serious problem for me because I have poured a couple hundred dollars into iTunes and now I can't even consistently get the stuff I bought because it may cause my system to crash. I have tried the latest version of iTunes, and the 7.2 version, and they both cause the same problem.
Thanks

I had the same problem last night. This started when I began downloading podcasts to my iPhone. Received the blue screen when iTunes began to sync with the iPhone. I'm going to try removing the podcast subscriptions and see if the blue screens stop. I have been running other basic Microsoft Office, Photoshop, and standard HP software with no problems until this occurred. I have not had any other blue screens since I bought the HP in June.
As a separate issues, I can not play any podcasts on iTunes for more than a couple a seconds. iTunes terminates prematurely. I'm using the latest iTunes software.

IMac G5 PowerPC boots up and freezes at light-blue screen

PowerPC G5 20" iMac, 2.0GHz, +260 GB harddrive, 2 GB of DDR SDRAM
Leopard OS 10.5.6
Computer starts up and freezes at light-blue screen. Mouse still moves, bu no keyboard commands work. Only holding the power button will shut down the computer.
Tried the following:
- Able to boot into Safe-mode only.
- Ran OS Disk Utility to repair permissions and also MacTuneUp 3.6.0, and no change
- Tried changing start-up to boot from OS 10.5.6 DVD and still freezes with light-blue screen. Safe-mode allowed me to run Disk Utility but no difference.
- If I leave the frozen light-blue screen, eventually the iMac power-saving mode darkens the screen, until I move the mouse (then light-blue again and still frozen).
- I left my iPhone connected to the iMac, and when starting up the computer the iPhone started charging. When the light blue screen froze the iPhone stopped charging.
- tried starting computer with Options + Command keys
- tried + Options-Command-P-R untill you hear two beeps: Reset NVRAM (restart 3x)
- tried Resetting the SMU > Unplug all cables from the computer, including the power cord. > Wait 10 seconds.> Plug in the power cord while simultaneously pressing and holding the power button on the back of the computer. > Let go of the power button. > Press the power button once more to start up your iMac.
Questions:
> When booting from OS 10.5.6 DVD, Should I run Time Machine Restore system from Backup?
> I can work fine in Safe-mode all day, but limited resources. Is this a software or hardware issue?

Based on what you have you tried I would guess it is hardware problem.
First iMac's without camera and with GeForce FX 5200 graphics card are known of having capacitor failures which can cause the machine either to become unstable in different situations or fail to boot up at all. I have repaired many of them and changing capacitors brought completedly dead iMac (no power, no nothing) up to life so capacitors mean a lot.
Second and third it's mainly the graphics card which fails, causing the machine to fail to boot, become unstable or boot with artifact patterns in picture.
There has also been power supply issues and Apple did issue a recall back then, I think you can still find article about it and check if your machine has serial number which fits to that recall problem. This way you could check if you should suspect power supply going bad.
Capacitor problem is usually easy to identify (open up the case and look if those can-like things are bulging or swollen) and quite easy to repair if you have bit experience in computers and soldering, iFixit.com provides great disassembly instructions. Graphics card problem is harder to identify because in that case it is the solder which breaks under the graphic chip so you cannot actually see the defect. It is also harder to repair atleast if you want the machine to work long time after that repair. Basically you would need to heat the GPU enough to reflow solder connections.
Because the machine can boot into safe mode I'm suspecting that you have some of these issues I described, safe mode does not utilize hardware at full power and disable full graphics acceleration for example.

My macbook pro freezes and then displays a blue screen with black stripes... do you know what's wrong with it?

My macbook pro freezes and then displays a blue screen with black stripes... do you know what's wrong with it?
I have a two and half year mac book pro... I've had some issues with the screen looking scrambled when I quit certain applications, but now it's turned into something worse. I'll be working on my computer and the thing will freeze. When I force restart, the first screen, the apple logo, will be a blue tint and won't boot up normally. Then I try safe mood and it will then boot just fine. But there are blue stripes on my screen. The screen alternates from a blue tint to normal and if the computer freezes again the screen will become completely blue with black stripes. I haven't tried reinstalling my software because I don't have the startup discs that came with my computer. If I was sure that would fix it I would purchase them, but if it's a hardware issue I'm afraid that I'm screwed. I've been able to successfully get the blue off my screen by putting it to sleep and then waking it up, but that's not working well anymore either.
Does anyone else have experience with this? Is it the firmware or what? I have a MacBook Pro from early 2011 and I'm running Mac OS X 10.6.8.
Please help... Thanks!

I just experienced this exact same issue with my early 2011 15" macbook pro. Since like a month after purchasing it I had issues with the screen randomly going dark on me. I sent it in for repair inder waranty they replaced the gpu and logic board but I continued to have the same issues with the screen randomly going black sometimes I would need to reboot it in order to get the screen to go back on but it happened so infrequently and I used the computer for school so disnt find the time to resend it in to apple. Just last night the screen started to display the blue screen with black verticle lines on it. I called apple and explained to them the issues that had been ongoing since I purchased the laptop but they said because I was now outside of warantee that any repairs at thia point wouldn't be covered. Fml so glad I spent 2200 on this future proof macbook pro what a joke my sister purchased a toshiba laptop for 300 4 years ago and it still running like a champ. I loved my macbook but at the price I paid I expect it to last longer than 2 years before leaving me high and dry. *** apple??

Firefox Causes "BLUE SCREEN CRASH"

Hello There.
To my utter dismay I am forced to use Chrome to access this forum. The reason is the moment I use Firefox (3) my computer crashes and I get the dreaded windows blue screen. I have been using ff for a long time now without problems. Yesterday I updated adobe flash player, but have now uninstalled flash player in the hope that the problem is resolved. No luck. I can use my computer in normal manner without problems, but the moment I use ff it crashes

I have this problem too, just installed Windows 7 Home Premium x64 two days ago. Yesterday I did a massive windows update and I believe the BSODs started after that. I've isolated it down to Firefox, partly because I had a similar problem with Vista x64 prior to the Win 7 upgrade and had removed Firefox from the machine completely w/o giving it too much thought.
Last night I found a way that 100% crashes windows within 5 mins, 5 times in a row, open firefox, open certain tabs and just wait. BSOD.
Note I also use Thunderbird but that doesn't seam to crash windows.
I found two separate threads on other forums suggesting this might have something to do with fonts. Not sure why Firefox is the only application suffering from it though. So from another thread following steps were suggested that are shown below, I haven't tried these. Another user on a different forum suggested running windows repair and through that somehow fixing the fonts. I'll report later if this issue helps solve the problem.
1. this may seem random, but might be worth a shot... i think this problem
often occurs because of registry errors with the fonts... this solution fixes
that. if you browse to windows/fonts and immediately get a blue screen, then
the fonts are your problem
2. first try going to control panel > fonts >font settings (on left) > restore
default fonts
3. if you can't access fonts in the control panel then try this... in explorer go
here: \\%COMPUTERNAME%\C$\Windows\Fonts (replacing %computername% with your computername).
4. then hit ctrl+a to select all the fonts.
5. once they're all selected right click and select "install".
6. when the dialogue box pops up saying that "[such and such] font is
already installed, would you like to reinstall it?" click the box for "do this for
all current items", and hit "yes"
7. reboot (just for grins), and you should be good to go

Ipod touch causing blue screen

I'm new here so I hope I explain this properly. I have the latest version of itunes installed on my computer with a 1G nano. I just got a ipod touch. I pluged it into my usb port like I did with the nano and it moved all my music onto the touch. The problem now is when i try to plug the touch back into my computer it boots out and goes to the blue screen and says an unexpected error ocured and one or more disks need to be scaned. The computer boots back up and all is well until I try and plug the touch back in and the same thing happens.
Any help would be great.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Each time I open FCPX my mac book pro freeze and I get a blue screen , I am running FCPX 10.08. I experienced that problem since I downloaded some plugins from Noise Industries . Can somebody help me please ?

Each time I open FCPX my mac book pro freeze and I get a blue screen and my mac book is completely frozen...

Have you removed those plugins ? They could be in your Movie folder or Library - application support - FCP- plugins - effects

My phone is switched off and then shows a blue screen, then yellow then white, can u help me?

Iphone 5s is switched off and then shows a blue screen, then yellow then white

I just experienced this exact same issue with my early 2011 15" macbook pro. Since like a month after purchasing it I had issues with the screen randomly going dark on me. I sent it in for repair inder waranty they replaced the gpu and logic board but I continued to have the same issues with the screen randomly going black sometimes I would need to reboot it in order to get the screen to go back on but it happened so infrequently and I used the computer for school so disnt find the time to resend it in to apple. Just last night the screen started to display the blue screen with black verticle lines on it. I called apple and explained to them the issues that had been ongoing since I purchased the laptop but they said because I was now outside of warantee that any repairs at thia point wouldn't be covered. Fml so glad I spent 2200 on this future proof macbook pro what a joke my sister purchased a toshiba laptop for 300 4 years ago and it still running like a champ. I loved my macbook but at the price I paid I expect it to last longer than 2 years before leaving me high and dry. *** apple??

Lvalmark.sys and nitiork.dll caused Blue Screen sometime

Similar Messages

Maybe you are looking for