LVM 2.0 Problem with System Refresh

Hello,
we're using LVM 2.0 (latest SP)  for refreshing a QA System. For testing we use the task list SAP_BASIS_COPY_REFRESH via the LVM.
The SAP table export is working and the data is written to /tmp/VCM_pca/<SID>/vcm_exp_<SID>_2014_08_28_15_23.
After that the system is build via LVM with NetApp volume clonening.
The sytem is coming up and task list SAP_BASIS_COPY_REFRESH should delete table data from the source system and import the saved from the previously step.
But we get the following error:
Task list run SAP_BASIS_COPY_REFRESH_20140828132612 does not exist in the file system
Executing RFC 'STC_TM_SESSION_IMPORT' with the following arguments: RFC Destination Name: 'LVM_SystemID.ER5.SystemHost.saper5.<domain>.Client.000.Import'; Input Parameters
'{PARAM_SESSION_ID=SAP_BASIS_COPY_REFRESH_20140828132612}'.
So LVM is not able to find the export data. When I execute the task list manually via STC02 in the new system the task list is executed and the data is imported. 
Is it maybe a time problem?
The export folder is named _2014_08_28_15_23  but LVM is searching for SAP_BASIS_COPY_REFRESH_20140828132612, so there is a time difference of two hours.
Our systems have the same time.... !
Any ideas?
Thanks and Best Regards,
Andreas

Hi Andreas,
I checked with our DEV team and below is the feedback:
The way it works is - the refresh task-list will export the data and come to a special confirmation task where LVM confirms the task and saves the task list to the file system. Once the copy is done, LVM imports the task-list and continues with the import.
LVM creates a folder for storing the task-list and the export data and in your case, LVM is looking in the wrong folder for the import
task-list and the import data.
The name of the folder & the name of the task list run are two different things.
The time difference of two hours probably means; that LVM is in a different time zone (CEST) then the target host / system (UTC). The folder is created by LVM whereas; the task-list is run by the system. In general, this should not cause any problems however, it still makes sense to check the time-zone maintained within LVM with the time-zone of the system to rule this out completely.
LVM adds the path to the export directory to the DEFAULT profile of the target system (ctc/export_data = …). You should check if this is the correct folder, containing the task list run. This info. can also be found in the LVM logs.
Hope this helps!
Best Regards,
Adarsh

Similar Messages

  • Problems with System Update 3.14.0019 after installation SP2

    Have you encountered problems with System Update 3.14.0019 after installation SP2 for Windows Vista?
     After this upgrade I view  this error: "An error occurred while gathering user information."
    Thanks for the help

    A known issue.  It wasn't supposed to be supported until SP2 is RTM.  However, look at the stickied post in the forum for some bad news about SU.
    x61s

  • When installed JDK but I have problem with System vars may install bundle

    When installed JDK but I have problem with System vars may install bundle [netbeans&JDK] WITHOUT UNISTALLING initial JDK or needed uninstall first ?

    With the word 'automatically', yes you do need pulseaudio. I'm sure you could cook up some udev or related rule to do that in Alsa, but pulseaudio would be easier.

  • NMac Pro 6core D500 problems with screen refresh: 10.9.3 warning!

    Avoid 10.9.3 on the Mac Pro 6 core, D500.
    Problem with screen refresh using Motion soon after updating OSX from Mac Pro late 2013 version of 10.9.2.
    I tried my Asus HDMI at all resolutions but to no avial. The screen juddered like it was Windows 95 without any GPU drivers.
    Apple's Tech Support had me use many key commands and finally we found out there was no issue with my hardware. Apple suggested a clean install before sending it back for repair. I was fortunate to have had made a backup in the Time Machine of my computer soon after installing all my apps. After restoring my computer is running 10.9.2 version made for the Mac Pros Late 2013. There are no more problems with screen redraw after using Motion.
    So, it is clear I cannot upgrade my Mac Pro to 10.9.3 while the issue with Motion's render engine messing with my screen refresh continues. Returning to 10.9.2 has made me realize 10.9.3 is slower and not as stable.
    I would suggest not upgrading unless you have a 4k monitor.

    Avoid 10.9.3 on the Mac Pro 6 core, D500.
    Problem with screen refresh using Motion soon after updating OSX from Mac Pro late 2013 version of 10.9.2.
    I tried my Asus HDMI at all resolutions but to no avial. The screen juddered like it was Windows 95 without any GPU drivers.
    Apple's Tech Support had me use many key commands and finally we found out there was no issue with my hardware. Apple suggested a clean install before sending it back for repair. I was fortunate to have had made a backup in the Time Machine of my computer soon after installing all my apps. After restoring my computer is running 10.9.2 version made for the Mac Pros Late 2013. There are no more problems with screen redraw after using Motion.
    So, it is clear I cannot upgrade my Mac Pro to 10.9.3 while the issue with Motion's render engine messing with my screen refresh continues. Returning to 10.9.2 has made me realize 10.9.3 is slower and not as stable.
    I would suggest not upgrading unless you have a 4k monitor.

  • Problems With System Configuration

    System Configuration is altered and not repairable. Selective startup is persistent. Normal startup is selected, but the Apply button is greyed out, inaccessible, and system always remains in Selective startup. As a result, Current User profile is probably
    corrupted. Windows Store will not install (services are corrupt, SFC and DISM did not work). Outlook profile was deleted, needed to be reinstalled, and can not receive mail. Excel math engine totals values higher than actual amounts. IE automatically signs
    into all Microsoft accounts (reset to default settings worked for a log on, but automatic sign in resumed afterwards).
    Are there any solutions?
    Office diagnostics produced the following report.
    Diagnostic Results
    None of the Microsoft Office Diagnostics found any problems.
    More resources
    Setup Diagnostic — File corruption or altered file
    The Setup Diagnostic repaired problems with your installation of Microsoft Office. Your Microsoft Office programs should now function correctly.
    If your Microsoft Office programs continue to crash, the source of the problem may be a hardware failure or hardware configuration problem. Review the results of the Disk and Memory Diagnostics to determine if a hardware failure is affecting your installation
    of the 2007 Office release.
    More resources
    Setup Diagnostic — Missing media
    The Setup Diagnostic was not completed because a valid source was not found. Either the local installation source is missing, or the original source that was used to install Microsoft Office is not available to the repair process. You may need to provide
    the original source to allow this diagnostic to run successfully. Valid sources for the 2007 Office release include the following:
    Your 2007 Office release installation CD
    An installation disk or repair CD provided by the vendor of your computer
    A connection to a network installation of the 2007 Office release
    After you obtain access to a valid source, run Office Diagnostics again.
    More resources
    Disk Diagnostic — Failure of hard disk predicted
    The Self-Monitoring, Analysis, and Reporting Technology (SMART) feature of your hard disk has found errors that may indicate that the hard disk is likely to fail. SMART is a feature that some disk drive manufacturers provide to give users advance notice
    of potential hard disk failure. Instability in your Microsoft Office programs may be the result of these hard disk drive errors.
    Note This result can indicate a severe problem, but some hard disks may not accurately report their results.
    We recommend that you do the following:
    1.Back up your important data immediately.
    2.Check the results of other diagnostics, and follow the instructions for resolving any issues that the other diagnostics have reported. After you resolve those issues, run Microsoft Office Diagnostics again to see if this Disk Diagnostic issue is resolved.
    3.If you continue to get this result, contact someone, such as the vendor of your computer or hard disk.
    More resources
    Disk Diagnostic — Errors in system event log
    The Disk Diagnostic found evidence of hardware errors. Instability in your Microsoft Office programs may be the result of these hardware errors.
    This result occurs if one of the following has happened recently:
    The Self-Monitoring, Analysis, and Reporting Technology (SMART) feature of your hard disk has found errors. SMART is a feature that some disk drive manufacturers provide to give users advance notice of potential hard disk failure.
    Microsoft Office Diagnostics has found blocked-out (failed) sectors on your hard disk.
    Microsoft Office has had trouble accessing files from the hard disk; it needs these files to function properly.
    We recommend that you do the following:
    1.Check the results of other diagnostics, and follow the instructions for resolving any issues that the diagnostics have reported. After you resolve those issues, run Microsoft Office Diagnostics again to see if this Disk Diagnostic issue is resolved.
    2.If you continue to get this result, contact someone, such as the vendor of your computer or hard disk.
    More resources
    Memory Diagnostic — RAM failure
    The Memory Diagnostic found evidence of failure in the random access memory (RAM).
    We recommend that you do the following:
    1.Check the results of other diagnostics, and follow the instructions for resolving any issues that the diagnostics have reported. After you resolve those issues, run Microsoft Office Diagnostics again to see if this Memory Diagnostic issue is resolved.
    2.If you continue to get this result, do either of the following:
    Run a Microsoft Windows memory diagnostic. For more information, see the following:
    Windows Vista How do I know if my computer has a memory problem?
    Microsoft Windows XP Windows Memory Diagnostic
    Contact someone, such as the vendor of your computer or RAM.
    More resources
    Memory Diagnostic — User is not an administrator
    The Memory Diagnostic was unable to run because you do not have administrative rights on this computer. To successfully run the Memory Diagnostic, someone with administrative rights must log on to this computer and run Microsoft Office Diagnostics.
    More resources
    Update Diagnostic — Installation is out of date
    The Update Diagnostic determined that your installation of Microsoft Office does not have the latest service packs installed. Installing service packs improves stability. We recommend that you visit Downloads on Microsoft Office Online, and then, under Office
    Update, click Check for Updates.
    More resources
    Compatibility Diagnostic — Conflicting versions of Outlook found
    The Compatibility Diagnostic identified conflicting versions of Microsoft Office Outlook. To remove the version of Outlook from your computer that you do not want, do the following:
    Microsoft Windows Vista
    1.Click the Start button, and then click Control Panel.
    2.Click Uninstall a program.
    Note In Classic view, double-click Programs and Features.
    3.Select the version of Outlook that you do not want, and then click Uninstall.
    Microsoft Windows XP
    1.Click Start, and then click Control Panel.
    2.Double-click Add or Remove Programs.
    3.Select the version of Outlook that you do not want, and then click Remove.
    More resources

    Check disk and memory diagnostics found no errors.
    SFC and DISM listed errors when performed in diagnostic start up. Commands changed from previous attempts. Before SFC and DISM only had to be entered as SFC and DISM. Presently, additional commands are required.
    Log Name:      Microsoft-Windows-MemoryDiagnostics-Results/Debug
    Source:        Microsoft-Windows-MemoryDiagnostics-Results
    Date:          8/21/2014 12:51:09 PM
    Event ID:      2001
    Task Category: None
    Level:         Information
    Keywords:     
    User:          SYSTEM
    Computer:      TAS
    Description:
    Windows Memory Diagnostic results
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-MemoryDiagnostics-Results" Guid="{5F92BC59-248F-4111-86A9-E393E12C6139}" />
        <EventID>2001</EventID>
        <Version>0</Version>
        <Level>4</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x4000000000000000</Keywords>
        <TimeCreated SystemTime="2014-08-21T16:51:09.612555200Z" />
        <EventRecordID>1</EventRecordID>
        <Correlation />
        <Execution ProcessID="5296" ThreadID="5300" />
        <Channel>Microsoft-Windows-MemoryDiagnostics-Results/Debug</Channel>
        <Computer>TAS</Computer>
        <Security UserID="S-1-5-18" />
      </System>
      <UserData>
        <Results xmlns="http://manifests.microsoft.com/win/2005/08/windows/Reliability/Postboot/Events">
          <MemDiagRawData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emDiagRawData>
        </Results>
      </UserData>
    </Event>
    Windows Resource Protection could not start the repair service.
    Microsoft Windows [Version 6.3.9600]
    (c) 2013 Microsoft Corporation. All rights reserved.
    C:\WINDOWS\system32>DISM
    Deployment Image Servicing and Management tool
    Version: 6.3.9600.17031
    DISM.exe [dism_options] {Imaging_command} [<Imaging_arguments>]
    DISM.exe {/Image:<path_to_offline_image> | /Online} [dism_options]
             {servicing_command} [<servicing_arguments>]
    DESCRIPTION:
      DISM enumerates, installs, uninstalls, configures, and updates features
      and packages in Windows images. The commands that are available depend
      on the image being serviced and whether the image is offline or running.
    GENERIC IMAGING COMMANDS:
      /Get-MountedImageInfo   - Displays information about mounted WIM and VHD images.
      /Get-ImageInfo          - Displays information about images in a WIM or VHD file.
      /Commit-Image           - Saves changes to a mounted WIM or VHD image.
      /Unmount-Image          - Unmounts a mounted WIM or VHD image.
      /Mount-Image            - Mounts an image from a WIM or VHD file.
      /Remount-Image          - Recovers an orphaned image mount directory.
      /Cleanup-Mountpoints    - Deletes resources associated with corrupted mounted images.
    WIM COMMANDS:
      /Capture-CustomImage    - Captures customizations into a delta WIM file on a WIM Boot system. Captured directories include all subfolders and data.
      /Get-WIMBootEntry       - Displays WIMBoot configuration entries for the specified disk volume.
      /Update-WIMBootEntry    - Updates WIMBoot configuration entry for the specified disk volume.
      /List-Image             - Displays a list of the files and folders in a
                                specified image.
      /Delete-Image           - Deletes the specified volume image from a WIM file
                                that has multiple volume images.
      /Split-Image            - Splits an existing .wim file into multiple
                                read-only split WIM (SWM) files.
      /Export-Image           - Exports a copy of the specified image to another
                                file.
      /Append-Image           - Adds another image to a WIM file.
      /Capture-Image          - Captures an image of a drive into a new WIM file. Captured directories include all subfolders and data.
      /Apply-Image            - Applies an image.
      /Get-MountedWimInfo     - Displays information about mounted WIM images.
      /Get-WimInfo            - Displays information about images in a WIM file.
      /Commit-Wim             - Saves changes to a mounted WIM image.
      /Unmount-Wim            - Unmounts a mounted WIM image.
      /Mount-Wim              - Mounts an image from a WIM file.
      /Remount-Wim            - Recovers an orphaned WIM mount directory.
      /Cleanup-Wim            - Deletes resources associated with mounted WIM images that are corrupted.
    IMAGE SPECIFICATIONS:
      /Online                 - Targets the running operating system.
      /Image                  - Specifies the path to the root directory of an offline Windows image.
    DISM OPTIONS:
      /English                - Displays command line output in English.
      /Format                 - Specifies the report output format.
      /WinDir                 - Specifies the path to the Windows directory.
      /SysDriveDir            - Specifies the path to the system-loader file named BootMgr.
      /LogPath                - Specifies the logfile path.
      /LogLevel               - Specifies the output level shown in the log (1-4).
      /NoRestart              - Suppresses automatic reboots and reboot prompts.
      /Quiet                  - Suppresses all output except for error messages.
      /ScratchDir             - Specifies the path to a scratch directory.
    For more information about these DISM options and their arguments, specify an option immediately before /?.
      Examples:
        DISM.exe /Mount-Wim /?
        DISM.exe /ScratchDir /?
        DISM.exe /Image:C:\test\offline /?
        DISM.exe /Online /?
    C:\WINDOWS\system32>DISM.exe /English
    Deployment Image Servicing and Management tool
    Version: 6.3.9600.17031
    Error: 1639
    No DISM options were specified on the command-line.
    Run DISM with a command-line option specified, such as /Image or /Online. For more information, refer to the help by running DISM.exe /?.
    The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log

  • Problem with "System.in.read()" read() method!

    import java.io.*;
    import java.lang.*;
    class Count {
    public static void main(String args[]) throws IOException
    int count = 0;
    while (System.in.read()!=-1)
    count++;
    System.out.println("Input has " + count + " chars.");
    in this code the loop stucks and it increments the count variable infinitely of course as long as i hit enter. I am trying to understand the problem with read() method of system class's in object. in its definition it says; when the inputstream ends it returns -1, but in this code it does not return -1 ever. another question of mine is that what args[] array do? what does it store??

    Java doesn't bother much with the dos console and it a bit limited and limiting - no pretty colours /graphics options - just text - that's because java graduates to GUI's where there is laods of power and object /component support to do everything and everything you could imagine and more. System.in.read() ??? - thats a fine start!
    what args[] array do? what does it store??
    Good question !
    It provides a means of passing a parameter argument from the command line to the program - consider this;-public class HelloWithArgs {
       public static void main(String[] args) {
          System.out.println("Hello I am " + args[0]);
    }What does it do and how does it work? Or this;-public class HelloWithArgs2 {
       public static void main(String[] args) {
          try{
             String myName = args[0];
          catch(ArrayIndexOutOfBoundsException aob){
              System.out.print("No names: program will end");
              System.exit(0);
          System.out.println("Hello I am " + myName);
    }Study them and have fun. Though to answer the question -
    " public static void main(String[] args) {" // or
    " public static void main(String[] parameters) {"
    is the 'entry point' of all java programs, in order to do something it has to have a main() method and if youre going to pass on parameters, then why not a String array? If you think about it anything else would be fairly useless.

  • Problem with ATV refresh rates and frame rates

    I live in Australia and as such I am subject to PAL, so when I set my ATV up I set it to 720P 50Hz, when I purchased a TV season the episodes were running at 25fps and played back flawlessly with no dropped or added frames. My problem occurs when I download movies, all the movies I have bought are running at 24fps and suffer from quite noticeable jitter, almost like the 24th frame is duplicated and added as the 25th frame, I assume it is something like this as the pause happens every second.
    So has anyone had a problem similar to this and if so what do you do about it?
    Does the ATV playback all sources (24/25) smoothly even if it has to convert?
    Could it be caused by my TV?
    Any help to any of these questions would be great.
    Thanks.
    Tim.

    With my particular Apple TV setup and TV combination, I find that setting to 1080p (60hZ) gives my the best all-round round results.
    This does result in -slightly- jerky motion with 25fps material (especially old British TV shows), but it's bearable. It's particularly noticeable with sideways scrolling text and credits.
    The one thing that is peculiar on my setup is if I use 720p (either @60hz or 50hz) and watch an iTunes-purchased HD episode that is encoded at 24fps I get very odd motion effects indeed. Every few seconds the video appears to speed up almost like it is 'catching up' with lost frames - very hard to explain exactly how it looks. Anyway I set to 1080p and this effect is gone completely. It also goes away if I set to 1080i. I think something queer is going on with 720p on the Apple TV (at least with my TV there is). This happens with both HDMI and component outputs.
    It may be worth trying 1080i at either 50 or 60Hz if your set can't do 1080p.
    I would also suggest that 60hz in theory should give a smoother motion for 24fps playback than 50Hz.
    My basic problem with all this is that on even a cheap DVD player if a disk is 50Hz, the player switches to 50Hz output and if it is 60Hz, it will change to 60Hz. The Apple TV stays fixed. It's a shame it can't autoswitch refresh rates.

  • Source System Problem after system refresh in RSA1 trx

    Hi,
    We have R/3 4.7 Test source system created in our SCM 2007 Test System. The source system check was OK.
    The R3 Test system was refreshed with Production data few days back and now my source system is not working. When i perform Source System check it says:
    BI unknown in source system
    BI IDoc type ZSSB006 is not the same as source system IDoc type
    I performed following steps in R3 Test system after its system refresh:
    1. Created logcal system and created RFC.
    2. Created port in trx we21.
    3. Created partner profile in trx we20.
    4. For the outbound parameter RSSEND, I had to create idoc type that should be same as in my SCM system i.e. ZSSB006.
    5. Created idoc type using trx we30 as a copy of RSSEND and added entry in table EDIMSG. Now, i could also create outbound parameter RSSEND with idoc type ZSSB006.
    After performing the above steps i also replicated the datasources for the R3 Test source system, but its still showing above error.
    I also checked the RSBASIDOC table in SCM test system. It has correct entry for my source system. But there is no such entry in RSBASIDOC table in the R3 test system.
    Someone pls help me.
    Regards,
    Chintan

    Hi
           Need to restore the All Dalaload connection settings after refresh the system which either R/3 or SCM.
    RSA1 -> select the Source system -> Right click -> Restore , It'll ask the connecon paramters like RFC , method of activations. Then check the connection test of the Source system .
    Check the the note for further  info...
    Note 886102 - System Landscape Copy for SAP BW and NW BI
    Hope halp you...
    Regards,
    Sureshram

  • Source System Problem after System Refresh

    Hi,
    We have R/3 4.7 Test source system created in our SCM 2007 Test System. The source system check was OK.
    The R3 Test system was refreshed with Production data few days back and now my source system is not working. When i perform Source System check it says:
    BI unknown in source system
    BI IDoc type ZSSB006 is not the same as source system IDoc type
    I performed following steps in R3 Test system after its system refresh:
    1. Created logcal system and created RFC.
    2. Created port in trx we21.
    3. Created partner profile in trx we20.
    4. For the outbound parameter RSSEND, I had to create idoc type that should be same as in my SCM system i.e. ZSSB006.
    5. Created idoc type using trx we30 as a copy of RSSEND and added entry in table EDIMSG. Now, i could also create outbound parameter RSSEND with idoc type ZSSB006.
    After performing the above steps i also replicated the datasources for the R3 Test source system, but its still showing above error.
    I also checked the RSBASIDOC table in SCM test system. It has correct entry for my source system. But there is no such entry in RSBASIDOC table in the R3 test system.
    Someone pls help me.
    Regards,
    Chintan

    Hi Chintan,
    Can you please check IDOC in your Target system. It should be the same type. Better you do the Partner profile steps.
    Also please check have correctly created the idoc in Inbound or Outbound.
    Consider the case like if its exist in BW as Out bound then its connected to Inbound IDOC of R/3 and vice a versa.
    Please elaborate your refresh activites. Normally IDOC setting never get changed in you refresh activites.
    Just check your BW system patch level and search for Notes.
    Regards,
    Mahesh

  • Problem with system Inactivity/Idle time after installing Lion.

    Since installing Lion strange things have been happening.
    While I was happily editing a text file in TextMate and interacting with the Terminal, my screen saver started. I could only get rid of it by clicking on it, keyboard interaction didn't seem to clear it.
    Adium was sending lots of updates to MSN to try and update my friendly name, which was causing issues with MSN sending errors back.
    After unlocking 1Password and starting to look for a username/password the application would then lock itself.
    I have since disabled my screen saver, which has not appeared again. I have updated the preferences in Adium to not change my status based on system idle time, although the dock icon for it permanently displayed the Idle sign. I have also updated the preferences in 1Password to prevent auto-lock after n minutes.
    Since changing these preferences I have not had any problems with the applications, however this isn't ideal. As soon as I revert these changes my problems come back.
    Has anyone else had this sort of issue? Does anyone know what might be causing my system to believe that it is idle, when I am clearly interacting with it?

    If I delete the existing xml file and set the file path to the desktop, the script works again. However it doesn't work if the applescript is called by another program. This seems to indicate that the XML portion if fine, but that there is some sort of new file permission level control in applescript that wasn't there before that is preventing me from viewing the file. Any further ideas?
    Cheers

  • Severe problems with System Preferences after updating to OS 10.8

    After updating my MacBook Pro (2Ghz Intel Core i7) from MacOS 10.6.8 to 10.8 I have severe problems with accesing System Preferences.
    For each of the topics (XXX) listed below, I get the following message, when selectiong the topic:
    "To use the XXX preference pane, System preferences needs to quit and reopen"/OK/Cancel
    After quiting and reopening the same message appears again...
    Topics (XXX):
    Desktop & Screen saver
    Security & Privacy
    Notification
    iCloud
    Mail, Contacs & Calendars
    Date & Time
    Software Update
    Dictation & Speech
    Startup Disk
    After updating to Mac OS 10.8.1 the problem persist.... Any suggestions or fixes?
    Best Regards
    Carsten

    1. Open Disk Utility and repair permissions
    2. Open Finder, press Option key, select Go > Library, open Preferences folder and delete com.apple.systempreferences.plist
    3. Go to System Preferences > Users and Groups, create an user and check if the issue appears
    4. Backup the data and press Command and R keys in boot. Open Disk Utility, select the drive, erase it and install Mountain Lion. When Mountain Lion asks for the backup, only move your user files

  • Again problems with System Update

    Hello
    Yesterday I've newly setup my computer with Windows Vista. After this installation I have usually install Lenovo System Update first. I have installed the newest version (3.14.0008) and I'm trying now to use it, but it always tells me, that there are no packages available for my system.
    The strange thing is, that the package index (around 400 KB), which is normally downloaded, is never downloaded. The connection settings in Internet Explorer are correct.
    Does anyone else have the same problems? On saturday, everything went fine with System Update. Since yesterday, I'm unable to get any software or drivers.
    Maybe there's a problem with the package server?
    Thanks for any response.
    raftbone

    Yes, we here in Germany have also problems, the same message appears.
    The Update Server seems down, try again later or tomorrow.
    See on "thinkpad-forum.de" are also users with this problems.
    Greets
    Message Edited by Agotthelf on 07-21-2008 09:56 AM
    Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
    Please insert your type, model (not S/N) number and used OS in your posts.
    I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
    TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
     English Community       Deutsche Community       Comunidad en Español

  • CS$ Mac Install error after problems with system

    I have Illustrator CS4 for Mac.  Had system problems and several programs failed to run after re-installing system 10.6.8.  Now all (including PSE) work except for Illustrator.  Have tried to re-install Illustrator, but when the installer finishes, it says, "installation complete with errors.  It suggests re-starting and trying again, which I have done several times.  I have also run the uninstall app and then re-installed.  After quitting the installer, Illustrator will open to the start screen, but clicking on any of the choices or selecting open or new from the file menu results in the program quitting.  I really need this to do my work, and have people waiting for jobs.

    Of course that should say CS4, not CS$.  This is an iMac (late 2006) with System 10.6.8.  There is nothing in any crash or log files that makes sense to me.  Here is the message.
    I have tried a few hints found in other posts for other install issues.  Am still having the same situation.  It starts, but accessing any menu or a choice from the startup screen results in the program quitting.

  • Weird problem with system

    I have a K8N platinum and i seem so be having some weird problems. A lot of the time it is having problems reading certain disks. for instance I once installed Rome total war on my system and it ran fine. i then had to reinstall windows due to some SP2 causing my system to go haywire when i reloaded windows got the latest driver and stuff  when i tried reload teh rome game it was telling that the files onteh disk might be corrupt as it was reading them correctly. after much chasing about with activision and installing  differnt drivers i finally got it working again  ( i think by dowlnloading the nforce drivers from MSI rather than Nvid) i Recently got a new 200 gig HD and decided to reinstall windows on that get a fresh copy of SP2 on disk(third attempt at loading that nighhtmare update every other time has caused sys probs)
    again im back to problems reading the cd same as before but getting the drivers from MSI this time hasnt helped as these were the first i tried.
    am currently using nforce 5.10 and getting nowhere
    any had or heard of anything similar?

    Why people call it MSI drivers is beyond my knowledge .
    5.03 is a NVIDIA driverpackage for NF3_CK8S with some drivers removed , 5.10 is a later NVIDIA driverpackage and unified for nf3 250 chipsets and backwards to nf2 .
    The IDE drivers is the same in both 5.03 and 5.10 so you get no difference regarding your problem altering between theese .
    5.03 has an older gart driver and doesn't include nv-audio drivers , rest is the same .
    If you have problems with CD , revert the controller to "Standard Dual Channel PCI IDE controller" for the PATA controller .
    Leave the SATA controller with "Nvidia nForce3 250 Serial ATA Controller (2.6) .
    Revert only the PATA controller which CDROMs use back to the microsoft standard ide one through device manager
    Ide ATA/ATAPI controllers -  Nvidia nForce3 Parallel ata controller - properties - driver-tab - Update driver - install from a list .. - don't search - choose :Standard Dual Channel PCI IDE controller -apply .
    Run the CDROM alone one one of the two ide ports as master . And harddisk(s) if you have any PATA HD's  on the other one .
    And don't use the cheapo red MSI ide cable . 

  • Problem with System Control Manager on MSI GX660

    HI.
    I am new
    I have problem with my MSI GX660.
    Since yesterday SCM didn't work for me.
    When windows starts, SCM have appcrash error and FN, and touchpad(eco,turbo,wifi) didn't work.
    I installed the newest version of SCm but still didn't work.
    I have Windows 7 x64
    Sory for my English-I am from Polish

    Quote from: Bas on 03-March-11, 02:24:11
    Did you install SP1 yesterday?
    I don't know did SP1 but I install some new updates yesterday.
    This is the problem?

Maybe you are looking for