Lync Online available with Exchange 2010

Is it possible to purchase Lync as a stand alone product for use with an existing Exchange 2010 server?  I'm a little confused about the options and know I can purchase a Lync server - which I would rather not do.  I see the online is available
as part of Office 365 which hosts Exchange, etc. but do not want to do that.  I thought I read there is a "stand alone" Lync client but can't see where/how to get it.  I am interested in downloading a trial version of the program.  Thanks
for any assistance. -TW

Lync Online can be purchased as a standalone service from Office 365 too.
Lync Online
http://office.microsoft.com/en-001/lync/lync-online-overview-and-features-online-meetings-and-instant-messaging-FX103789571.aspx
Don't know if there is a trial that you try out, but you can ask in the
Office 365 Community
Martina Miskovic

Similar Messages

  • Uploading photo from Lync client with Exchange 2010

    We are using Lync 2013 standard edition with Exchange 2010 in our environment.
    In the client, if we go to Tools -> Options -> My Picture, the option to "Edit or Remove Picture" is greyed out.
    I understand this is only available if we're on Exchange 2013, but someone somewhere must have figured out a workaround for this? Anyone know a reg-hack or 3rd party tool that would enable this feature?
    I realize there is a method to turn back on the "Show a picture from a website" via powershell. I have already done this in our environment. However it is quite unrealistic to expect general populace to know how to resize a picture to less than
    30kb (?!) and upload it "somewhere" on the web. Understandably this would be a nightmare for Help Desk having to help people resize their photos and find somewhere to upload it to.
    Any help/ideas would be appreciated!

    You could centrally upload profile photos for your users into the AD's thumbnailPhoto attribute using...
    powershell:
    http://blogs.technet.com/upload-picture
    3rd party software: 
    http://www.codetwo.com/freeware/active-directory-photos/
    http://www.cjwdev.co.uk/Software/ADPhotoEdit/Info.html
    Lync client side upload into Exchange 2010 will not be possible as Exchange 2013 introduced HD photo and storing photos in the mailbox. Take a look at: http://technet.microsoft.com/en-us/library/jj688150.aspx
    Please mark posts as answers/helpful if it answers your question.
    Blog
    Lync Validator - Used to assist in the validation and documentation of Lync Server 2013.

  • Lync on premises with Exchange online UM SRV record

    Hi,
    We have Lync 2013 on premises and we have Hybrid exchange deployment, recently we have integrated Lync on premises with Exchange online UM, we have configured subscriber access and I have done all configuration, created hosted voice mail policy, created
    Subscriber access UM contact.
    Problem is that if a user dials from Lync client to voice mail (Exchange online UM Subscriber Access number) the call successfully establish, if the same user is outside the organization and wants to call the Exchange online UM Subscriber
    Access number from his mobile or from his home phone number the call doesn't connect, this problem is not from the same user any one from outside the organization can not call to subscriber access number from his mobile or from his landline (outside the organization
    numbers)
    I have done some logging on Lync Edge server and found two things:
    When a user calls from Lync client to O365 UM Subscriber access the call establish successfully and when I see the call logs I am seeing the
    [email protected] and SRV record for the domain.com is verified
    When a user calls from outside the organization (Landline or mobile) to O365 UM subscriber access the call doesn't establish and when I see the call logs I am seeing
    [email protected] and subscriber access number as
    [email protected] and the error says Unable to resolve DNS SRV record for domain it.domain.com.
    Please note our internal domain is it.domain.com and our external or smtp domain is domain.com
    In Lync 2013 the default sip domain is also it.domain.com and additional sip domain is domain.com
    Pleasae help me to resolve the issue.
    If answer is helpful, please hit the green arrow on the left, or mark as answer. Salahuddin | Blogs:http://salahuddinkhatri.wordpress.com | MCITP Microsoft Lync

    The issue is that your default domain is it.domain.com. I suspect that even if your Edge server is able to route this call back to Exchange online, that tenant will reject this call as it will not be able to find it.domain.com or federation SRV record associated
    with it.
    You will need to change your default SIP domain to your public SIP domain. If you decide to do this, please note that you will also need to review any impact on the simple URLs (and certificates if applicable).
    It is also recommended to perform an export-csconfiguration command to backup the topology before making these changes.
    Hope this helps.
    SinghP80

  • Limitations of SharePoint 2013 integration with Exchange 2010?

    Customer using SharePoint 2013 and looking at whether its possible to integrate this with Exchange 2010 and which features would be available / limitations. Looking for a matrix similar to those found in the Good, Better, Best documents available for previous
    versions. Nothing available on Recently Published content for SharePoint 2013 yet http://technet.microsoft.com/en-us/library/cc262043.aspx

    I haven't seen a specific list, but the three features I've run into that only work with Exchange 2013 are eDiscovery in Exchange, Automatic Task Synchronization with Outlook and the Site Mailbox feature.  There is a Legacy Task Synchronization mode
    available that will work with Exchange 2010 if you turn off the Farm level feature controlling Exchange 2013 task synchronization.  It lets users manually sync specific task lists with Outlook.  But there is no task aggregation.  I found this
    whitepaper helpful for exploring the new features and how to turn them off when using Exchange 2010.
    http://www.microsoft.com/en-us/download/details.aspx?id=38799
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • Z10 with Exchange 2010 Activesync missing incoming messages

    Z10 with Exchange 2010 Activesync won't download all messages, missing messages include messages sent to internal Exchange distribution groups and bulk email (I could live with this one, lol) Activesync works fine on iOS and android devices (100+ devices in my organization with no issues). Tried enabling secure IMAP on the exchange server, and with this config the messages are delivered, but the body of the same messages missing with the activesync setup have a [No body found] in the message body and are otherwise blank. Tried running the EAVT tool and it returns "Nothing was found for provided credentials" . My personal Gmail account works fine on the phone, tried loading the 10.1 Blackberry OS and had the same problem. Tried setting up the account multiple times, used both autodiscover and manual setup to no avail. Any thoughts? Thanks in advance for your help!

    Hey cyberayk,
    Welcome to the BlackBerry® Support Community Forums.
    Do these email messages get redirected to a different folder on the Exchange Server?  If yes, On the BlackBerry smartphone go to Settings > Accounts> Select the account> Edit Folder Settings, are these folders selected? 
    Thanks.
    -HB
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Unity 5.0 compatibility with Exchange 2010 SP2?

    Has anyone out there tested Unity 5.0 (1) with Exchange 2010 SP2? Did you have any problems? I understand that Unity 5.x has gone end of maintenance, and it has not been officially been tested for compatibility with Exchange 2010 SP2 for unified messaging. I don't anticipate being able to upgrade Unity until next year, but the sytem admins want to upgrade from Exchange SP1 to SP2 sooner. Thanks.

    Has anyone out there tested Unity 5.0 (1) with Exchange 2010 SP2? Did you have any problems? I understand that Unity 5.x has gone end of maintenance, and it has not been officially been tested for compatibility with Exchange 2010 SP2 for unified messaging. I don't anticipate being able to upgrade Unity until next year, but the sytem admins want to upgrade from Exchange SP1 to SP2 sooner. Thanks.

  • Exchange 2013 DLP with Exchange 2010 mailboxes

    Ive got an Exchange 2007/2010 environment. I've been looking at Exchange 2013 and am interested in the DLP funtionality.
    There are no plans to move mailboxes to Exchange 2013 but would it be possible to install an Exchange 2013 CAS/Mailbox server in my environment and route email through it to make use of the DLP ?
    Current environment consists of Exchange 2010 DAG, Casarray and hub transport servers, and Exchange 2007 mailbox servers, CAS and hub transports. Mail to the internet is sent to a smarthost.
    Thank you.

    Hi Maria,
    DLP Policies are actually a specific transport rule. Since the transport rules with Exchange 2010 didn’t provide such feature to monitor and check the e-mail
    content, I am afraid, in theory, it’s not possible.
    Thanks,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Simon Wu
    TechNet Community Support

  • Cisco Unity Connection Single inbox with Exchange 2010

    I have a new installation of Unity Connection 8.6.2 using single inbox with an Exchange 2010 cluster frontended by a Netscaler load balancer.Functionality that does not work is when a new message comes into outlook and the message is read or deleted it does not update the status on the phone- IE turn off the MWI or if the message is deleted it is still a new message in Unity. If you click reset in the user unified message account, the status gets updated.
    TAC says its a blocked port on Exchange TCP 7080 but that is open.

      I followed this document :
    http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/unified_messaging/guide/85xcucumg020.html
    but when i try to integrate CUC with exchange 2010 , i didn't find is clear enough
    do you have Step by Step more clear than that link becouse my lab very close to your case.
    Regards

  • TS4532 Any idea on the timing of the software update to fix the IOS6.1 problems with Exchange 2010?

    Any idea on the timing of the SW update to fix the IOS 6.1 problem with Exchange 2010?
    victor

    In reply to Macca7275
    We moved from Blackberry to iPhone for 120 services in 2010.  We have just renewed the iPhone fleet.  Security was the issue for the business that employs me (lawyers).  When comparing the two, Blackberry performed without issue most of the time but we experienced a number of issues with the trackballs on individual phones. This was, however, the first of the Blackberry Bold models.  The expense behind the scenes was one of the major factors for the move. It was cheaper to run Exchange and iPhones than Blackberry services. Our lawyers on the whole adopted the iPhones and a number have become quite proficient at using them. We ensured that we had a means to securely wipe and lock business phones. We chose Mobile Iron for this purpose but you will find other products to do the same job. Cost is probably going to be the deciding factor here.  Our only negative factor was butterfingers resulting in smashed glass with the iPhones although I have had one user drown several phones.

  • Does SL Mail/iCal/Address Book work with Exchange 2010?

    Is anyone using Exchange 2010 with Mail/iCal/Address Book (via the Snow Leopard web services interface and not the IMAP interface)?
    My company is about to upgrade Exchange from 2003 to either 2007 or 2010 and since the boss and I both use Macs we want to make sure that SL's apps will work no matter what choice of Exchange server is made.

    SL has not been tested with Exchange 2010 as far as I am aware. 10.6.2 was only tested against the 2007 variant.

  • Problem with Exchange 2010, Q10 and attachment

    Q10 & Exchange 2010; unable to download and forward attachment
    Hi all,
    i have a problem with Q10 phone, sync with Exchange 2010 with activesync (not BES) all seem ok but unable to download attach.
    When press "download" didnt start. Unable also to forward same message but i think is a chainde problem.
    Same message from desktop (outlook) or OWA is ok and attach downloadable.
    This is the only Q10 present in company for test so i cannot compare to others BB.
    All other users connected to the exchaneg server have iphone & ipad no issue result. Email service seem ok also for desktop.
    Firmware was updateted about 10 day ago.
    Any idea for me?
    Thanks

    Hi marcottt,
    Could you provide more detail please so I can better assist?
    Do you have this issue with all attachment types? If not, what type of attachment are you having this issue with and what size is the attachment?
    What happens when you try to forward the message? Is any error received?
    Does removing and re-adding the email account make any difference?
    I look forward to your response.
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • Does Edge transport server for Exchange 2013 work with Exchange 2010?

    Hello everyone,
    I want to install Edge transport server for my Exchange servers,
    Could you tell me if Edge transport server 2013 works with Exchange 2010?
    Thank you in advance

    Hello
    tip:
    https://technet.microsoft.com/en-us/library/jj898583%28v=exchg.150%29.aspx
    2   If you want to create an EdgeSync
    Subscription between an Exchange 2010 Hub Transport server and an
    Exchange 2013 SP1 Edge Transport server, you need to install Exchange
    2010 SP3 Update Rollup 5 or later on the Exchange 2010 Hub Transport
    server.
    sorry my english

  • Edge 2013 sp1 with exchange 2010 organisation.

    Dear reader,
    I have an exchange 2010 sp3 organisation with 1 client access server with hub transport and a 2 node DAG. Can I install a stand alone exchange 2013sp1 Edge role on a seperate machine in DMZ and subscribe the exchange 2010 hub transport to it. This
    in preparation to move to exchange 2013sp1 later this year. The current exchange 2010 edge role is installed on a TMG 2010 machine. Since TMG 2010 is dropped and we also have issues with the current edge's mailflow, i'd like to have a dedicated Exchange edge.
    Best regards,
    Ruud Boersma
    MCITP Enterprise administrator

    Sure, You can install Edge of Exchange 2013 on a dedicated server in DMZ and subscribe with Exchange 2010 Transport server.
    Or you can allow the Existing Exchange 2010 Edge server to serve your internet mail flow till the time you implement Exchange 2013 in the environment. I would suggest Exchange 2013 CU5 as a lot of issues were fixed in that which were identified with Exchange
    2013 SP1.

  • Mail for Exchange incompatible with Exchange 2010

    MfE is incompatible with Exchange 2010.
    There seems to be a difference in the EAS protocol used.
    This causes synchonisation to fail when syncing the calendar.
    If anyone has a workaround please let me know and Nokia please fix this issue?
    Solved!
    Go to Solution.

    Hi there,
    just installed Mail4Exchange (3.00.050) from the ovi store on my Nokia e71.
    Unfortunately it doesn't seem to sync anymore with my google apps account. Anybody else encountering this problem? I get a message every other second that there seems to be a sync problem and that i should contact my admin if this stays on.
    It worked perfectly with the older version though.
    Thanks for any advice.
    Regards,
    JohnnyT76

  • RightFax 9.4 Intergration with Exchange 2010

    We know Exchange 2010 is supported with Fax Server 9.4 FP1 and we need to install the FP1 patch.   We need to move the RightFax 9.4 integraton from Exchange 2003 to Exchange 2010.  Is there any white papers or support documents on how to do this?
    We need both inbound and outbound (faxing from Outlook) to work with Exchange 2010.   What steps need to be done to complete this task?  Thanks!

    I think it may make sense to contact the RightFax people (OpenText) regarding this, since RightFax is their product.

Maybe you are looking for