Lynx Dual Boot 8.1/Android

Anyone have any success with dual booting the Lynx? Lenovo has Android 4.1 on the K900 smart phone with an Atom Processor so the architecture should be there to have a boot image of 4.1.
Any and all ideas greatly appreciated.
Thanks in advance.

I'm wondering the same....So i guess just bumping this thread...

Similar Messages

Dual-Booting Windows and Android on Yoga Tablet 2 13?

So I am a big fan of the lenovo yoga tablet so I started looking into the new versions of the tablet and I came upon something curious. both the yoga tablet 2 pro and the yoga tablet 2 13 (windows) have the same processor (a 64-bit processor) as well as very similar technical specs(the main difference being the windows edition has 4GB of ram instead of 2GB and a larger battery no doubt due to the removal of the integrted pico projector). as well Lenovo has the source code for the android build in the pro available on the website.
So my question is if both are running off the same 64-bit processor is there anything stopping someone from compiling the yoga 2 pro source code and installing the yoga 2 pro android OS onto the Windows version of the tablet (dual-booting both) aside from secure boot needing to be disabled?
after scouring the internet and asking a few lenovo representatives I have found absolutely no information on this (the lenovo reps I spoke to couldn't even confirm the specs of the processors but I found that data from the intel ark database) and it is something I really would like to do if possible (especially with android 5.0 having x86 support integrated in the vanila build)
So anyone have any information on anyone trying this or something similar being attempted?

so, lenovo putted a really bad bios on thoses tablets.
http://forums.lenovo.com/t5/Windows-based-Tablets/Alternatives-OSes-and-CMS-under-Yoga-1051/td-p/190...
To make it short, the uefi bios used on yoga tablets support only x86 so, the x86-64 instruction set can't be used, on windows. Without CSM (compatibility support module) you can't even try to boot some oses. For linux you need to mod it, i'll try later but, i can't build a new bios and lenovo is not present on this board

Stream 7, dual boot, windows and android

Given that the HP Stream 7 can be equipped with lots of storage, why not dual boot it with Window and Andoid so I can have the best of both worlds
can this tablet be configured to do that?

Before going to a lot of trouble, I'd get a boot disk on USB with Android X86 on it. Then boot off the USB.
I'd also suggest using 4.22 or 4.4, not 5.0. "Everyone" is still working on 5.0.x.
I've not had much luck on a few devices and Android x86 - hence my suggestion. I have NOT tried it on the Stream 7

YOGA 2 - 1051F Windows 8.1 Dual boot Android

Hello,
I have a YOGA 2 Tablet 1051-F under Windows 8.1 and I want to install Android in dual boot mode.
I made an USB stick bootable with Android IMG but the tablet don't want to boot on it. I checked the UEFI and Secure is OFF --> no succes.
I also download on this site the UEFI Tools & Diagnostic, I can see it in the BIOS option but when I want to but on it, nothing append.
Any idea to help me ?
Many thanks

Salut Misterwood .
a tu trouvé quelque chose ?

Dual Boot Thrive Android with Linux Mint 17

Hello Peter,
Can you plrovide instructions on how to dual boot Thrive Android 4.0.4 and Linux Mint 17? If not, can you point me to a website that can provide this information?
Thanks.
Bob

Hi Peter,
Thanks for your quick reply. Can you tell me how I can partition the drive? And how to gain access to a command line or CLI shell?
BaseLegBob

Arch & Android-x86 Dual Boot ?

Hi All
Has anyone installed Android-x86 as a Dual Boot with Arch yet ? Its something that i'm considering doing and wondered if anyone had done it yet ?
Cheers

...I don't care
I see no reason why it wouldn't work... I would think a simple google search would tell you the answer, no?

Need some help about Win 8.1 and linux with a dual boot

Hi!
I have a Lenovo z50-70 notebook and I have a Windows 8.1 on it. (The one which was shipped with this notebook...)
My concerns are Intalling Linux as a dual boot and loosing Windows 8.1.
As I am not familiar to Win 8.1, the product key is in the ?BIOS? and there's a lot of partitions...
If I install Linux Ubuntu (latest version) as a dual boot by manually making the partitions, etc. and then if I lose my Windows 8.1 system, how can I get it back?
I've made a backup of the system to the portable hdd but I don't know can I restore it, as I have no win installation disc and I am not sure if i can restore win 8.1 from the backup by using random win 8 installation disc that I've made from the downloaded ISO (for e.g. Win 8.1 pro iso from internet)...
I need a Linux distro for developing my Android ROM but I don't want to lose that Win 8.1 OS from my notebook. So.. What should I do?

Did you do a full disc backup of the C: Drive using a backup tool other than windows? If you did, then the recover of that partition will be up to your backup software.
If worse comes to worse, you can use the novo button to restore your computer to what it was like when it came from the factory. But there really is nothing to worry about. Create your new partition and just make sure that you install Linux to that partition. Make sure it is not the same size as any other partition, that way even if the Linux installer does not show the volume labels, you can tell which partition you want to install Linux in just by the size.
Hoov
Microsoft MVP - Consumer Security
SpywareHammer.com

Dual-Boot Your HP TouchSmart With Windows Vista and Windows 7 in Three Easy Steps

Good article on creating a dual-boot environment. Here
HP Product Expert for the Officejet Pro X Series.
Was your question answered? Mark it as an Accepted Solution!
See a great post? Give it a Kudos!

claudecat87 wrote:
We have two computers in the office, and i am usually on our dell comp, while my bf uses the touchsmart. We just came home to find that our computer had shut itself off on its own. upon starting it, the computer would only get as far as showing the HP screen (a blue screen with a hand and objects flowing from the hand) and the four menu options { F10: setup" esc: boot menu' F11 system recovery F9 :diagnostics}. At the bottom right side of the screen it also says v 5.10. Now, when we have pressed any of the options, the computer does nothing. It would appear that perhaps the computer can not tell windows 7 to boot or something. Unfortunately we do not have the install disc either... Any thoughts?
Seems like it's stuck at the POST Screen, and nothing's responding.
I suggest removing all the USB and peripherals plugged into the PC and leave only the power and the USB keyboard receiver- nothing else.
Then try turning on the computer, if it doesn't work, I don't think there's any fix except to keep trying.
If you can get in, i suggest making a backup as soon as you can.
After that, if it still does it, then call HP at 1-866-408-5408 or chat with them at : http://welcome.hp.com/country/us/en/contact/chat_1.html
I have more HP devices than you'd expect.
1 HP TouchPad 32 GB with Android
2 HP Touchsmarts (310-1000z and IQ527)
2 HP Printers (J6480 and J5750)
1 Laptop (HP DV6253CL)
Have at least some experience in each of those devices, and i'll do my best to help you.
Kudos if I helped!

Dual boot Lenovo Miix 3 -1030

Hello, I have tried every method I could think of, and I haven't been able to dual boot factory Windows 8.1 and Android x86/Linux due to missing usb boot entry in BIOS/UEFI settings. How cand I fix that? Thanks in advance.

I don't have the tablet (yet) but I'm interested in this too. Has anyone got Android x86 working? I saw this post: https://code.google.com/p/android-x86/issues/detail?id=1653 so it seems it is possible. Also saw this page: https://forums.lenovo.com/t5/Windows-based-Tablets-Knowledge/Miix-10-Unable-to-boot-from-USB-stick/ta-p/1460131 It is important that you have a UEFI bootable USB, not just legacy bootable.

Dual Boot Ubuntu Macbook Pro 8,1

I have learned through trial and error (mostly error) that the newest Macbook Pro (early 2011 8,1) has a problem with ubuntu liveCDs and will not boot from them. I want to get Ubuntu running primarily so I can root my android phone. As of now I have Ubuntu 11.10 running on a virtual machine with VirtualBox but virtual machines don't work for rooting purposes. Is there still a way to dual boot a Macbook Pro 8,1 with Ubuntu?

Ubuntu Live CD's are designed for generic PC machines, not Mac's with a GUID Partition Table and EFI.
Booting and installing Ubuntu on a Mac can brick the machine, as the header on the GPT has a partial MBR like Windows full MBR, so it's mistaken for one and attmepts to install.
Also Linux requires two partitions, one a swap partition which it mistakes the hidden EFI partiton for that.
Getting a Lion based Mac to dual boot Linux is much harder than Snow Leopard, as there is a new hidden Lion Recovery Partiiton to deal with, also on the newer 2011 Mac's with recent firmware updates has caused all sorts of headaches for the required rEFIt needed (hasn't been updated) and creating two more partitions that Linux requires.
If you had a pre 2011 Mac and no Lion, just Snow Leopard, I would say no problem.
A much better option for you is to get a inexpensive machine and install Linux on it, or buy one already installed, until this Lion buisness settles down and urber geeks tweek Linux on Mac's again, but right now it's appearing Apple has charted a course for a closed operating system like a iPhone/iPad and that doesn't generate a whole lot of interest in running Linux on Mac's.
http://www.system76.com/index.php/

Running Dual boot windows 8 and win 7 pro with xp mode installed!! I love it!!

It took over 2 days to figure out how to adjust the bios to get my win 7 pro DVD to boot and install dual boot on this GREAT MACHINE!!
Step 1: using diskmgmt.msc you have to shring the C partition. I shrunk it so I had 80GB remaining as unallocated space.
Step 2: You have to enter the machine Bios adn set the BIOS to Both and UEFI as first
Step 3: Connect your usb dvd
Step 4: Put your win 7 pro dvd in the usb dvd drive
Step 5: Reboot your machine and when it starts press F12 to get the boot menu and select the usb dvd drive then press enter
The machine restarts
Message on screen says press a key to boot from cd/dvd
Press space and it boots up the win 7 pro DVD
After files copy and load the setup screen asks to accept the agreement and where to install win 7
BE SURE TO SELECT THE 80GB location
Then follow thru the win 7 prompts to load it.
When the machine restarts you will see a dual boot screen with Windows 7 on top as first selection and Windows 8 below it as 2nd selection.
Make sure to hit enter with windows 7 selected
The win 7 installation completes.
You will see many items with drivers not installed dont fret.
You can load most of the drivers by highlighting the device in control panel/device manager and pick update driver then select BROWSE for DRIVER and be sure to put in drive D:\ which is now the windows 8 drive and hit search.
Many of the windows 8 drivers installed with no issue.
The Realtek driver was an exception .. goto to the lenovo site and pick the x100e tablet and download the LAN driver from there about (4MB). Copy it to flash drive and install it in win 7 from the .exe file. The driver for LAN will install sucessfully. The version of the driver is 7.46 something the 7.11 versions do not workl.
I have only 3 drivers that I could not find - 2 list as unknown and are related to ACPI or power management and 1 lists as USB controller but all the USB stuff works without it.
Be sure to either shutdown the system or sign out of win 8 when your done so you get the dual boot menu. If you shutdown while logged into win 8 the next time you start up it will go right to win 8 until you signout and restart.
Just to let you know an easy way to shutdown is go to the desktop and press ALT + FN + F4 and a shutdown menu comes up on the desktop.
Once win 7 pro is installed you can download the XP mode free from Microsoft and install it.
This is of course AFTER you have ACTIVATED WINDOWS 7 ONLINE with YOUR ACTIVATION KEY(you supply).
ENJOY! This is the BEST machine I ever had!

It's been many, many years since I don't do dual boot anymore. Don't find the reason to do it, either. Different kinds of virtualization should be enough. Anyway...
dfw1417 wrote:
It took over 2 days to figure out how to adjust the bios to get my win 7 pro DVD to boot and install dual boot on this GREAT MACHINE!!
ENJOY! This is the BEST machine I ever had!
WHICH machine?
Cheers.
If I helped you, please give me some kudos! ^^

How to remove windows 7 safely from my dual boot win7/win8 pc ?

i have a pc which is dual boot with windows 7 ultimate 64 bit & windows 8 pro 64 bit, my pc had four drives C: D: E: F:, windows 7 is on "D:" drive & windows 8 is on C: drive(i had set win8 as current & default OS), now when i opened
disk management i found that the D: drive where win7 is residing is marked as
system,active,primary partition, now i don't want win7 anymore , i want only win8 on my pc, i want to format & get back clean empty D drive to use for other stuff (i don't want to delete the D drive partition), can any one explain me the steps
needed to achieve this safely.

Since you've selected as default OS as Windows 8.1 you can go to disk management console and format the drive as required.
You can remove the Win 7 entry from boot loader:
To launch msconfig:
Click Start
In the Search text box, type msconfig
Launch msconfig by selecting it from the search results above the search text box.
After msconfig is launched:
Go to the Boot tab
Slect the boot entry you want to delete.
Click the Delete button and then click OK.
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Dual boot win7 & 8 on t430

Newbie here needing some help. Just got my t430 fresh out of the box and I want to dual boot win 7 and 8. The installed system was 7, but came with windows 8 recovery disks in the box. I thought dual boot would be pretty straightforward, but I haven't been able to get it going. Any advice?

Hey there giovanni8807, welcome to the forums!
I found some perhaps helpful starting information for you to look over that will help guide you into the process. It is important to note, that you check to see what drivers and utilities are available for your machine for Windows 8. This will give you an idea of what is and what might not be available to function completely in that particular OS environment. Of course, take advantage of the Lenovo Solution Center for driver and utility updates for your machine once getting into Windows 8.
Drivers for the T430
How to Dual Boot Via PC world
How To Dual Boot Via CNet (I personally found this one to be a tad bit more clear.)
Good Luck, and keep us posted on your progress.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

Convert PXIe-8135 controller to dual-boot Windows 7 and LabVIEW RT

Hello. I have a PXIe-8135 controller that originally was just running Windows 7. We are trying to convert it to a dual boot system to also run LabView Real Time. (There is host computer that will run LabVIEW 2014 with the RT module, and the controller will become a target).
I have created a FAT32 partition on the hard drive of the controller. Now, I’m trying to install the real-time OS with a USB flash drive made using the MAX utility, but I cannot boot using the USB drive for some reason. I keep getting the message “waiting for USB device to initialize”.
In BIOS, legacy USB support is [ENABLED] and boot configuration is set to [Windows/other OS]. I’ve tried removing the drive, waiting, and reinserting. I’ve tried two different USB drives (both 8 GB, different brands).
I’m not sure what to do next. Apart from the USB boot issue, is converting the PXIe-8135 even possible? I read about SATA/PATA hard drive issues with older controllers, but I don't know about this one.
Thanks, in advance, for your help!
-Jeff
Solved!
Go to Solution.

Per Siana's licensing comment, more information on purchasing a deployment license if you do not have one for this target can be found here.
The RT Utility USB key is used to set up non-NI hardware with LabVIEW Real-Time, but you should not need it in this situation to convert to dual-boot (*). Try this:
1. Since you already have a FAT32 partion created, go into BIOS setup and change to booting 'LabVIEW RT'.
2. The system will attempt to boot LabVIEW RT, see that the partition is empty, and switch over into LabVIEW RT Safe Mode. (this safemode is built into the firmware, which is why you don't really need the USB key).
3. The system should come up correctly and be detectable from MAX, and you can proceed with installing software.
4. To switch back to Windows, go back to BIOS setup and choose 'Windows/Other OS'
(*) One area where the USB key is helpful on a dual boot system is with formatting the disk. If you want to convert from FAT32 to Reliance on the partition designated for LabVIEW RT, the USB key lets you attempt to format a single parition and leave the rest of the disk untouched. If you format from MAX, the standard behavior is to format only one RT partition if found, but if not found, it will format the entire disk. Formatting from MAX on a dual boot system is consequently riskier and you could lose your Windows partition.

Dual boot windows mac mini

I got a Mac mini and in general I'm happy with it but found out that there's some software I use regularly that is just much better on Windows. They barely support OS X although technically they do. So I would like to dual boot Windows as it seems like this is supported and not crazy.
I followed the bootcamp and some guides I found via Google. I have the mac mini 2014 with 8 gig ram and 1 terabyte of space. I have dual monitors setup and a logitech mouse and a logitech gaming keyboard G110 - both USB. (I also own a wireless apple keyboard which I occasionally use with my iPad). My first problem was a DOS screen telling me I can't boot up on the specified disk but I did get some help off Google telling me to hold down option while booting (this should be in the guides ;p) but it was easy to fix.. however I'm stumped on what's happening now.
When I click the Windows partition, it starts booting up Windows 7 Premium 64 bit setup and all looks good. Then a screen pops up asking me what language/region I am. The default is United states (perfect). On this screen my keyboard and mouse are useless. Or it's frozen. I think the former. I think the computer just can't recognize them. And I cannot figure out a way around this. If anyone can - please help I will be very thankful.
I've tried booting up using the Windows 7 DVD I own and an ISO installed on a USB flash drive per the Bootcamp installer. Results are the same.

Use Boot Camp!! Sounds like you have the install disc. Make sure you completely erase a USB 2.0 Thumb Drive format it as one MS DOS Master Boot Record partition. Download Drivers to it. I checked this box in boot camp only.
Having install disc and driver thumb drive ready. Insert Windows install disc and plug in Thumb drive.
Open Boot Camp uncheck first 2 boxes. Continue
Size the BOOTCAMP partion you want it to be by sliding the bar. Or split your HD is an option.
After that is complete. You will be asked where to install. Select BOOTCAMP partition
Click Drive Options (advanced). Click Format. Click OK. All goes well you click Next and it will format as NTFS
Follow instructions to to install, set up and configure Windows.
GO TO APPLE SUPPORT no where else. PRINT BOOT CAMP Installation & Setup Guide. It is in my binder with my Windows 7 Professional Disc. You'll need this, I'm afraid, to have on hand. When Windows is up and going, Antivirus 1st, Install Windows express updates only. Do not update Apple drivers for Windows. Running Windows 7 Pro on my Mac Mini since I bought it in August. Use it for those outdated programs I can't run on Mac or Windows 8. Love it.
GET THE MANUAL Please. Have fun with it.
Oh, try left clicking your USB Mouse to make it work. If not use keyboard strokes. i.e. I a ccept the license agreement (note that the a is underlined. hit "a" on the keyboard to check box.

Lynx Dual Boot 8.1/Android

Similar Messages

Maybe you are looking for