M2T missing audio in CS6 prem pro

Hi can any one help: I use a data video DN60 on a Canon XLh1a, the bins are coped on to the hard drive and imported in to prem pro using the media browser, some of the clips have audio missing some times all of the audio or just part of it, also some times some of the video is missing with prem pro giving a MPG decode error massage, I have searched the forum and most of the comments seem to refer to CS 5.5. this is the first time I have used the data video DN60, most of the time a have captured via tape, with no problems with sound but have had the MPG decode error massage. All the files play back using windows player with no problems.
System info:
operating system windows 7 64-bit
processor Intel i7
memory 16 GB

Hi All just got an answer back from Holden the UK dealer for Datavideo see below:
Hello Malcolm,
Datavideo R&D USA say they believe there may be an issue with Adobe CS5 and CS6 versions of software handling PCM audio in SD MXF files and encoded audio in HDV M2T files. This is something which should be discussed with Adobe support as we believe it is the NLE software not the DN-60 at issue here. We know Grass Valley EDIUS and FCP both handle these DN-60 files correctly. Your tests with Windows Media Player and VLS player appear to support this too.
So it’s up to Adobe
Thanks for the help and advice will now get onto Adobe for their response.
Do’s anyone know how to contact Adobe, there seems to be no E-mail address?

Similar Messages

Matching cameras in cs6 prem pro.

Canon hfg10, 60d, hfm56, i belive in fcp you can click a button and it matches all camera colours, can this be done in cs6 prem pro.

There's no such button in Premiere Pro, but there is a shot matching tool in Speedgrade CC:
http://helpx.adobe.com/speedgrade/using/whats-new.html
It's not a hardware-referenced correction so it doesn't actually match 'cameras' - instead it looks at the spectra of each shot and tries to work out the differences between tints on shadows/midtones/highlights. You can't feed it a GoPro sweeping landscape and an Alexa interior headshot, but if the two frames depict roughly the same content it does quite a good job. You can then save the correction data for each camera as a 'look', and back in Premiere Pro CC that look can be applied to all the other bits of footage via the Lumetri effect.
If you want an absolute 'reset' of each clip back to a reference standard, again you'll need to use Speedgrade; this time with the aid of a Macbeth chart. That workflow is a lot more complicated as it was only designed to work with cinema hardware. There is a hacky workaround using Lightroom and the X-Rite plugin:
Export a still frame showing a Colorchecker card,
Import to Lightroom as a DNG file,
Use Lightroom & X-Rite to make a DNG calibration profile,
'Develop' the still frame so the chips are now accurate (and set your expoure and luma end points),
At this point you could save the develop preset and apply it to other video files in Lightroom's Library module but you'd have to transcode your footage and Lr's video export options are limited to say the least.
If you want to use the 'calibration' back in Premiere, it gets fun:
Send the developed DNG to Photoshop and export as a TARGA file,
Import the TARGA to Speedgrade CC, then shot-match your video of the Colorchecker to this still frame (here's where you lose a lot of accuracy as the shot matcher isn't comparing each color chip, only the RGB curves),
Save the correction data as a .look,
Apply back in Premiere with the Lumetri effect.

Warp Stabilizer wobble cs6 prem pro

Any one tell me how to use the dam thing as everytime i use it, it creates a huge wobble wave effect??? steve

As Ann says, knowing what the source material is would make answering a lot easier.
What you describe sounds like the results from a source video shot with rocks/cliffs etc which you want to be static with moving sea in the shot? If so, you will find that the jelly effect is very hard to avoid. The problem is even worse if the shot was taken from a boat.
The new Premiere Warp Stabiliser does a better job on this kind of shot than any of the half dozen other stabilisers I have used in the past.

Can't get my MacBook audio to record audiio in CS6 Premiere Pro ?

Can't get my MacBook audio to record audiio in CS6 Premiere Pro ?
Am i missing something here ? It's telling me Premiere Pro is using the aggregate audio device,
though not sure what that means ?
thanks!

If your model number isn't showing up in Printer Setup then you need to install the drivers. After you do that you should be able to setup your printer and print OK. Make sure Appletalk is checked in Airport in your Network Pref Pane.

Cs5 exporting prem pro project to mpeg 2 but there is no audio what the?mac

HI I am pulling my hair out i want to export a prem pro project to mpeg2 because it needs to play and windows but there is no audio I have tried all setting can some one please help me is there a plug in or mpeg sound card

There are two checkboxes to look at:
Export Audio in the main settings panel
Multiplexing (tab) and choose DVD, or similar, rather than "None."
Even with Export Audio checked, if Multiplexing is set to None, you will get two separate files, one Audio and one Video.
Good luck, and I hope that is the answer,
Hunt

Pro Tools Missing audio file message syndrom exists on Logic

I come from Pro tools and i am a bit traumatised by this fkn Pro Tools missing audio file message for those who know what i mean..
Is it something possible and frequent in logic when we work on a daily basis ?

No, you simply copy the entire project folder to a flash drive and bring it home. If you have included the audio files in the project folder, which logic does by default, logic will find them just fine at home. If it asks where they are, you just hit "search" and if they're there, If you've copied the song file to your drive without including the audio files ("pilot error") then the program can't find them. Often, I get protools sessions from clients with missing files. Sometimes the entire audio files folder is missing, but more often the missing files are out-takes that are no longer part of the arrangement, and were still in the audio file list of the song, but were not included in the folder when the project was copied and brought to me. How or why, I cannot tell you.

Project Presets now 'missing' following un/re-install CS4 Prem Pro

A few glitches were hampering me so, tried and tested, I uninstalled and re-installed the WHOLE CS4 Prem Pro. Now, a big handful of Project Presets are missing. I'm now using v. nice HD footage/files and want to utilize their size and defenition. What's happened to my missing Project Presets please? Using PC with 64-Bit Windows Home 7.

Did you use Cleaner Tool before re-installing?
http://www.adobe.com/support/contact/cscleanertool.html

Missing Audio when Converting from MPEG1 Muxed to Ipod using QT Pro 7

I just got my video iPod over Christmas. After reading up on QT Pro 7, I purchased it over the weekend, and have attempted unsuccessfully the past two nights to convert home videos (taken with my Sony digital camera) to iPod format. My home movies play fine when I open them in Quicktime; however, when I export to the iPod format (and also when I export to mpeg4 format), I only get the video and not the audio.
I've confirmed that my key for QT Pro 7 is successfully loaded, so that's not the issue.
I've also confirmed that the format of the original video taken from my camera is "MPEG1 Muxed". Several internet discussion boards seem to indicate that missing audio is a common problem for people using Sony cameras and Quicktime. If this is the case, I'd prefer to simply refund my money and buy one of the other video to iPod converters available on the web.
So, either help me solve this problem, or help me get a refund. I'm fine either way.
-- Chief1Pat

QT does not export the sound when exporting from muxed mpegs (mpeg-1 or mpeg-2). QT Mpeg Limitations
You should be able to export both sound and video with this Windows freeware:
http://www.videora.com/en-us/Converter/iPod/

EXS 24 audio files missing from G4 to mac Pro. Export solves, but why?

Hi. I recently upgraded from G4 DP to Mac Pro (huge jump). While some of my sample libraries work straight away...others do not, claiming "file not found" when I know they're there.
A cure that works is to go back to the G4, load the files into EXS24 there, export them to my external drive and then run the mac pro off this. The "export" seems to be the critical step and seems to re-create the apparently missing audio files.
It's very slow as can only do one at a time. Is there something obvious I'm missing here?
All thoughts welcome
Jonathan

I have this too and I haven't been able to find any info on the net about this.
I have no audio transitions or effects at all. Would love to find out how to fix this.

Using DNxHD via prem pro Cs6

How do I download, import, edit with DNxHD via Prem pro CS6 or Media encoder. Just talked with Avid who deny DNxHD can be used with Adobe which I know is not the case?

When you encode to DNxHD out of Adobe Suite, choose 'RGB Level' while encidong to DNxHD 4:2:2
and '709' while encoding to DNxHD 4:4:4
Do not interfere with the Depth settings in the Export Settings dialog box.
P.S. If you don't see options for Avid codecs within QuickTime Format after installing Avid QT package on Windows, go to C:\Program Files (x86)\QuickTime\QTComponents folder, copy all .qtx files and paste them into C:\Program Files (x86)\QuickTime\QTSystem folder - now QuickTime will be able to find them.

Trouble getting audio files when importing R3D files into CS5.5 Prem Pro

Importing R3D files into Premiere Pro CS5.5 works for Video but the audio doesn't convert properly.   There is an audio file included in the R3D file that PP can see but it just has a few spikes.
This same file played in REDcine-X plays the video/audio just fine.   Is there some audio setting in Premiere Pro that I should be setting?
Oddly enough if I use REDcine-X to output a RED Trim file and then import it into PP, the audio file is shown separately and is imported correctly.   This of course involves a file conversion step in the workflow and a step that we are hoping to avoid.

In order to import all kinds of r3d, we had better convert it to adobe more compaitble video format like dv, mpeg, avi
You may refer to the following step by step guide on how to convert .r3d movies at Convert R3D to ProRes, MOV, AVI, MP4, WMV, 3GP, MKV
The guide applies to:
Convert R3D to ProRes 4444, 422, 422 (HQ), 422 (LT), and 422 (Proxy) to fast import any version of Final Cut Pro or Final Cut Pro X.
Convert R3D to MOV, MP4 to import R3D to iMovie for easy editing or to play R3D in QuickTime, iTunes, iPad, iPod, iPhone, Apple TV.
Convert R3D to AVI, WMV, MPG to edit R3D in Avid, Adobe Premiere, Sony Vegas, Windows Movie Maker or play R3D in Windows Media player, Xbox 360, Microsoft Surface.
Convert R3D to FLV, WebM, H.264, MP4 for upload R3D video files to YouTube
Convert R3D to DV, VOB, ASF, SWF, RM, 3GP, OGV, FLAC, OGG, MP3, WAV, WMA, AC3, AIFF, WMA and etc.

How to output back to Prem pro

Help, I am new to SG and can't seem to get an output file that works. Not helped by the fact I have not got my head round the pro/cons of different file formats. (hey I only got this prog about a week ago ..) I have benn asked by a client to produce a 30 sec advert, which he then wants to put on an Android tablet and give to customers.
I have created the advert, edited it in PP and output it to SG where I have made all the colour corrections. V happy so far, but when it comes to output, I seem to end up with a huge dpx file (30secs =7GB) and this file wont re open in Prem pro. i get the error message:" this file has no video/audio streams." Can anyone suggest where i am going wrong, or is it possible to output a file from SG that will play on an Android tablet directly? : seems to be very little on web about this. FYI my client flies to brazil in 4 days , so pressure here is mounting ! Thanks in advance,
simon

Hi Dennis,
Still got a problem. I have imported my vid into SG and it plays OK (with sound). I add my vignette etc, and go to SG output.
When i render using the preset panel : AVI> full frame(uncompressed> frame rate 24. I get an output file of 4G size , which looks good but has no audio.
When i output using preset panel: Quicktime > animation> uncompressed> I get an output file that looks awful: colours washed out, low contrast etc. but does have audio.
Other presets I tried were:
Quicktime >png 25fps, gives choppy playback and takes ages to render out.
and Quicktime >H.264, 2 passes, gives ok image but no audio
and Native MOV> (apple uncompressed) gives ok image but no audio.
Finally tried a Quicktime> MPEG4 video> 25FPS setting and that DOES give sound, but the picture is all washed out again!!!
Really getting frustrated here; can you give me a clue as to why these .mov files wont play with sound?
Fast machine, 16 g Ram, CS6, windows 7.
Thanks
Simon
FYI if i create a MPeg 4 file from Prem Pro, it plays fine and looks ok, just doesnt have the vignette that i need.

I have a Sony NEX-VG10, edit with Prem Pro and am having serious capturing issues.

I recently purchased the Sony NEX-VG10 and am really excited about it. I have run into some serious problems capturing the footage, though. I have a 2010 iMac, am running OSX 10.8.2 Mountain Lion and use Adobe Premiere Pro CS6 to edit. I've discovered that the files on the camera are .MTS, a file format with which I am unfamiliar (not surprising, I'm not exactly a newb, but the past few months is the first time I've started editing seriously - I am more a writer/director/producer and could do basic stuff with FC7 and Prem Pro - now I own my own production company and am getting down to the nitty gritty).
But I have found that
1. I can't capture using bridge, it doesn't recognize the file format.
2. When I plug the camera into the computer and go straight to the files, I don't even get individual files. All the information is contained in what looks like a Quicktime movie, but isn't recognized by Quicktime or any other program as anything.
3. When I go into the camera files using the import function in Premiere Pro, I find the individual .MTS files - which say they are Unix Executable files (no idea what that means), I can import them into PP, but the quality is atrocious. Grainy and pixely. Even when viewing them in full res playback mode.
4. I bought Bigasoft Total Video converter (wicked cool program). I import the files using PP, then go find them in this program, and convert them into .mov files - the quality is still atrocious (not surprised, as the .mts files look cruddy, what could I expect when I converted them - but was worth a try).
I need to capture these files in full quality (oh - the file information says they are in 1920 x 1080 (1.0), so it's not like I filmed in a low res.
The software that came with the camera is for PCs, I've searched for answers to these problems, and although I've found similar, I can't find anything that actually helps me. Can anyone out there tell me exactly what to do?!? I would be most appreciative. My new company's success depends on it!

If you'll type mts into the search field for these communities, you will see a plethora of threads on the subject - I was going to link to one, but there are so many, it'd be best for you to read through several. In any case, of note is the fact that you might be able to import into iMovie directly as long as you do not shoot in 50/60 fps - in order to be able to read it, it has to be either 30fps for NTSC or 24 for PAL.
Not sure if the frames per second problem has anything to do with your lousy quality problem, but it might. The other concern is that Sony has not and does not really play nice with anything Apple - that was one of the reasons I chose a Canon.

I can't open a thing in Prem Pro CC as

Been using Prem Pro CC for a few months and working on a project yesterday, went to open today and the message below came up!
I then tried opening up previous projects and the same again has happened with the below message.
Your help and advice will be greatly appreciated.
"This project contained a sequence that could not be opened. No sequence preview file or codec could be associated with this sequence type."

Missing Presets/Activation http://forums.adobe.com/thread/1050730?tstart=0 may help

HELP! Prem Pro Upload Driver Issues

Running the 1month trial of Prem Pro CS6 - and still not able to launch.
The exact error message reads:
"Adobe Prem Pro could not find an capable video play modules. Please update your video display drivers, and start again."
I run ATI mobility Radeon premium graphics and according to my Samsung Chronos 7 laptop all drivers are up to date.
Any help / advices gratefully recieved. Thank you!!

Unfortunately, many laptop mfgrs. rewrite the video drivers, and when they do, the nVidia, or ATI/AMD drivers will not install. Toshiba commonly does this, as do many others. I do not know Samsung, but it appears that they use a proprietary version of the ATI/AMD driver, so you are at their mercy, to issue new drivers. I hope that they are better than Toshiba was, as they seldom issued video driver updates. For about 5 years, I had to use a Web site, to customize the nVidia drivers, to fool the laptop into thinking that it was from Toshiba: http://www.laptopvideo2go.com/drivers With that Toshiba Satellite, I was able to update my nVidia drivers, about every month. Do not know if it will work with Samsung, and ATI/AMD drivers though.
Good luck,
Hunt

M2T missing audio in CS6 prem pro

Similar Messages

Maybe you are looking for