Mac Book Pro 17" 2006 version won't pick wireless signal with Airport update 7.5.2 and later.

My 2006 old 17" Mac Book pro is won't connect to Airport Extreme older version with update 7.5.2 and also with 7.6.2. In fact if I implement that update airport extreme will transmit over channel 100 which my Mac pro is unable to pick. Any advise ?
Thanks.

Thanks "a brody" ! Now I know I am talking to someone who knows the problem; I have checked with the site you advised me and I can tell you that my 17"MacBokk Pro (I am sorry for the mistake on first message) is one of them; in fact I have purchased that Airport Extreme 802.11n Enabler. However I forgot to tell you that my Airport Extreme base is transmitting at 5Ghz with the n protocol and my MacBook Pro has been working very well utill I tryed to update the Airport base to that 7.5.2 version: at that point my MacBook has never been able to pick the signal any more unless going backward to 7.4.2. In doing some experiments, I have found that with version 7.4.2, my Mac was picking the 5Ghz signal at channel # 44, instead, with the update 7.5.2 and later, the base started to transmit to channel # 100 and it looks like my MacBook is unable to go over the 44 channel ! (one more thing: my Mac has Leopard 10.5.8 OS). I have tryed to change the channel in the Airport base back to # 44, but my model (my Airport Extreme base is not the last model) do not allow to change the channel selection to "manual": there is only one selection "automatic". This is why I tryed to see if my Airport Extreme card (Wireless card firmware version 1.4.16.2) was not fit to received and transmit data on channels over 44.
If you have any idea that will be greatly appreciated; any how thank you very much for your time and help.

Similar Messages

I have photoshop cc and a mac book pro. I cannot access my photos from photoshop. I can go to iPhoto and click edit to edit them in photoshop, but photoshop won't open them. I want to do a collage, so I need to get to more than one photo.

I have photoshop cc and a mac book pro. I cannot access my photos from photoshop. I can go to iPhoto and click edit to edit them in photoshop, but photoshop won't open them. I want to do a collage, so I need to get to more than one photo.

See if exporting them helps:
Exporting From iPhoto | Apple Support Communities
Gene

Have mac book pro 5,5 version 10.6.8 i need to get adobe photoshop cs6 32bit or 64 bit which one do i get for mac?

Have mac book pro 5,5 version 10.6.8 I need to get adobe photoshop cs6 do I get 32bit or 64bit?

There should be only one version for the Mac, but it you have to choose then use 64-bit.

I just bought 15' Mac book pro. as i work a lot on Garageband. I even downloaded all the drummers and loops to update the new Garageband 10.0.1 now my problem is that all my past work which i did on older version on GB, has missing sounds in it.

I just bought 15' Mac book pro. as i work a lot on Garageband. I even downloaded all the drummers and loops to update the new Garageband 10.0.1
now my problem is that all my past work which i did on older version on GB, has missing sounds in it. so here are my questions
1. DO i have to install JAMPACKS on my new Macbook pro?
2. Are JAMPACKS still compatable with the new GB?
3. There is an UPDATE on the new GB on Appstore and once i click it, it goes to billing no detail is provided what this update is for so help!
thanks

3. There is an UPDATE on the new GB on Appstore and once i click it, it goes to billing no detail is provided what this update is for so help!
See: This document explains what the in-App purchase is about.
Expanding GarageBand for Mac (v10.0) content with an in-app purchase
Do you still have your old Mac?
How did you migrate from the old Mac to the new Mac? Did you transfer your old software and documents using Setup Assistant? Then your old GarageBand '11 version should have been migrated, and all your instruments.
if you did not migrate GarageBand '11, copy your old Instruments Library and Loop Library over from the old mac. Copy the following folders to a thumbsdrive and merge the missing dontents into the corresponding folders on your new mac: (from the system library - the top level library folder on your Macintosh HD):
/Library/Application Support/GarageBand/
/Library/Audio/Apple Loops/
And if you would like to continue to use GarageBand '11 for access to missing features, copy also /Applications/GarageBand over, but to a subfolder of Applications. I recommend, to install the old GarageBand as well. It can be used in parallel to GB 10.0, and will come in handy, if your old projects are having problems.
1. DO i have to install JAMPACKS on my new Macbook pro?
2. Are JAMPACKS still compatable with the new GB?
The JamPacks are nice to have, a terrific collection of instruments and loops, but if you did not have them previously, that will not help with your missing instruments. You can instll them by buying Mainstage 3. They work well with GarageBand 10.0
-- Léonie

Mac Book Pro on boot up, the apple sign will appear with the spinning wheel. After some time, a grey screen wil appear with a movable mouse, but will not boot up. Help!

Mac Book Pro on boot up, the apple sign will appear with the spinning wheel. After a period of time the screen will turn grey, but the mouse will still operate, but not boot up.

If it was purchased brand new then it's running a version of Lion, so to reinstall Lion:
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.

My daughter reset her Mac book Pro to the factory settings by her doing this did we loose all the pictures and stuff that was on the computer before

My daughter reset her Mac book Pro to the factory settings by her doing this did we loose all the pictures and stuff that was on the computer before

If by resetting to factory settings you mean she erased the drive and reinstalled the operating system, OS X, then yes all data thatwas on it is gone. That is why apple included time machine so you can make backups of your data.

HT3964 My mac book pro 2.3ghz intel core i7 will not start up. I get the apple and the circle thing but thats it. Please help!!!

My mac book pro 2.3ghz intel core i7 will not start up. I get the apple and the circle thing but thats it. Please help!!!

Give this a try:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

I have just purchased a Mac Book Pro. I would like to find the list of all updates and downloads that have occurred since purchase. Where can I find that info?

I have just purchased a Mac Book Pro. I would like to find the list of all updates and downloads that have occurred since purchase. Where can I find that info?

I know how to do the updates. What I dont know is what size each update that I have completed was. I am having a data usage disagreement with my Telco and want to prove to them that this computer did not download the amount of data they are claiming it did.

The Mac Book Pro is not charging. The led is green with the connection and the computer is not charging. Thank you for the help

The Mac Book pro is not charging. The led is green with the connection and the computer is not charging. Thank you for the help

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple.
Best.

My Mac Book Pro (2010 - Snow Leopard) won't boot, or boot from safe mode.

Hi, a bit of back ground knowledge bout the situation first, I was visiting home to see my family for two weeks in the UK, as i am currently on an internship in Dubai.
A few days ago (one day before i flew back to Dubai from the UK - Thursday 10/07/2014) I noticed out of the blue that my Mac book Pro (i believe early/mid 2010 model) suddenly started running extremely slow. (prior to this I had be using it fine, using an array of programs like Safari & Photoshop that i know usually slows down the Mac, but unlike what I would usually experience, this was pretty much a complete freeze for 5 minutes at a time every time i tried moving my mouse/closing a program or even clicking on something. I decided I would close everything and give the computer a rest. This took a long long time, I had to force quit many of the programs open, then once going to the drop down menu to shut down the laptop it wouldn't shut down. So after a long time of waiting to shut down I decided to force it to shut down by holding down the power button.
I left it for the evening, and then decided to turn on the laptop so it was 'on and working' for my flight back to Dubai as there had been 'stricter airport measures introduced in the UK for flights abroad' and there was a rumor that you had to prove that all electrical devices can be turned on when and if asked by airport security. after a long time it finally turned on and loaded the home screen, it had a long period on the grey apple screen with the turning gear. However still when turned on the problem of being extremely slow - freezing for 5 minutes every time i would click a program or something on the mac, like the drop down menu with the shut down option for example - still persisted. As I had to fly home the next morning (Friday 11/07/2014) I just closed the laptop lid like i had down thousands of times before over the past 3-4 years, packed it in my hand luggage and and went to bed. I flew back to Dubai.
Over the next few days (Saturday 11/07/2014 - Monday 14/07/2014) I used the laptop sparingly a it was super slow, but i did manage to watch the second half of the world cup runners up match between Holland & Brasil. I then went on to attempt to use the safari the on the Monday night, but it was too slow to really do anything, e.g. i couldn't even really look at the BBC website as it was too painfully slow!
This is when I decided to look up why it may be working so slow via my iphone.
So I shut it down,
I looked on forums and support ages and first thing they recommended was a 'safe mode boot up', so I decided to boot up in safe mode. This is where the problem seems to worsen. The Mac book pro would turn on to the grey apple screen and the progress bar appears, it begins to fill up but then reaches perhaps 20-30% then suddenly the laptops fan seems to go into over drive, making lots of noise when before this moment as it tried to boot up it was silent, then it just turns off.
I decided to retry booting up without holding down shift (safe boot mode), but it returns to the grey apple screen with the progress bar again, as if it was in safe mode even though I had held down shift. The same problem happens, its silent as the bar fills until abut 20-30% then it seems to 'overheat' and then turn off again.
I tried to boot it up again and again, both 'normally' without holding down shift, and 'safe mode', but the same issue arises.
So i turned to the forums and help pages again, and there was a mention of a PRAM reset. So i tried booting it up this time but holding down 'CMD + ALT + P + R' on the moment of the first chime, then as normal with a PRAM reset it chimed twice more before I let go of the keyboard. The progress bar again appeared on the grey start up apple page, and this time reached roughly the same 20-30% mark, but without overheating or making a fan noise, it then seemed to restart the progress bar a second time. This time as it reached the 20-30% it would again over heat and then instantly turn off.
I then decided to do a Hardware test. So i turned on the power and held down 'D', this successfully brought up the Hardware testing window, I did a regular test and within a few minutes it said there was no hard ware issue. Not convinced i decided to do an detailed/advanced hardware test which took alot longer. This time after a few minutes it started to make fan noises and 'overheating noises' however completed the hardware test and again said there was no hardware problems. I opted for the 'shut down' option on the screen instead of 'restart'.
I then decided to try and boot it up normally again, and the progress bar appears on the grey apple start up screen, it again reaches 20-30% then turns off.
I've exhausted my knowledge of what to do, and all the forums seem not to give the answer i'm looking for. It sees like no one has had the EXACT same problem i'm experiencing. Also being in Dubai for a further 7 weeks, I can't take the Mac book pro to an apple store, and I do not have any of the install DVD discs ect with me to try booting from DVD disc install.
Does anyone have any suggestions for me on what I could try next? I'd be hugely grateful! Please reply below or email me.

Some things you can try.
Startup Issues - Resolve
Startup Issues - Resolve (2)

Which ssd hard drive is good for the mac book pro 2011 early version?

i am looking for a ssd hard disk to boost up the speed of my mac book pro 2011 early model.any suggestion for the same user here? or i should not upgrade it? if i changed it, will my warranty be compromised? thanks for answering

best SSD's for the money: http://www.tomshardware.com/reviews/best-price-ssd,3070.html
top 20 SSD manfacturers: http://www.storagesearch.com/ssd-top10.html

My Mac Book Pro using Mountain Lion will show a usb headset with a mic to select in the settings window. But the Rosetta Stone software I am using will not find the mic for me to select and use. What should I do?

Mac Book Pro with OS X Mountain Lion will not recognize headset mic via Rosetta Stone software. What should I do?

Hi Illaass,
I am using version 3. I have used the apple/settings on my mac. The headset is appearing there and it is selected there. In the Rosetta Stone select/find window nothing shows up. It is blank. But the volume bars react when I speak and sliding the fader has the expected effect of raising and lowering the input. There is just no device showing up as the selected input device in the Rosetta Stone software.
I have done everything my Mac instructions say to uninstall and reinstall the Rosetta Stone software properly.
I'm guessing the problem may be in the licensing. I installed it first on the old hard drive that crashed. Maybe that used the terms of the license and now installing it in the new hard drive violates the license somehow. So that's why it will not work properly. It allows me to open the lessons and asks me if I want to continue from where I left off. I click continue. Then it asks me if I want to register the software. I click the tab for already registered software and click continue. Then nothing happens. So again I click on the button that indicates I want to continue lessons from where I left off. The same process happens with it asking me if I want to register the software. And it will not proceed through a lesson.

Greetings world.I have created a dmg. of my entire iomega ext HDD via disk utility using a mac book pro. It is currently sitting on the desktop. I have erased the iomega and now I can not understand how to put the dmg back.

It is safe to say that i need help..................
let me start at the beginning.
I have 1 2008 imac. always a pleasure never been a problem. Attached to it i have an iomega 500gb ext drive. also been ok.
until now!!
The HDD would not mount. Disk utility suggested that it was ok so i tested the imac HD. I got error code 4MOT/2/40000004: HDD- 1502. This doesnt worry me at the moment.
I attached iomega to my Mac book pro and again it would not mount. The disk utility did tell me that the iomega needed repair. it advised that i should wipe it and restore.
So I used the MB Pro disk utility to create a DMG. and saved it to the desk top. I then erased the iomega. did a repair and it all seemed ok. So then i try to do a restore.
After a very long time it said internal error with the dmg. using disk utility i did a convert dmg (compressed) and saved it to the iomega. middle of the night job!!
got up this morning and indeed it had sent the DMG to the iomega. But i could not open it. The iomega itself seemed dandy asking me if i wanted to use it as a time machine etc and it mounted ok and i saved a small jpeg to the iomega as well. I then thought that maybe when i did the convert as a compressed file i made a mistake. i'm guessing it should be a read and write so i started all over again.......... wiped iomega (which was quite quick) then tried the convert tool again.....it trys for a while then says there is not enough disk space...........I'm not sure which disk it is refering to.??
I have purchased a 1tb hard drive today incase the iomega is some how full up.
So really my question to the world is .........Help?

well no reply from the community. sniff- do i stink!? - probably a little bit. If i have lost all that data then I'm gonna really really pong.
Any ways i have purchased a 1tb usb HDD and have managed to duplicate the dmg file onto it. however still unable to mount the **** thing. so now i have ordered disk warrior which will be in my possession tomorrow.
fingers toes eyes crossed.

Mac book pro is unable to display desktop ,only white screen with apple logo is appearing

Hi
I have a Mac book pro, since today morning the Mac book pro is not starting. It just displays the white screen with Apple logo and search signal. Despite waiting for a long time desktop is not coming up.
I have tried to restart it several time but the status remains same. Kindly help.
Thank you
Kind regards
satish

Gray, Blue or White screen at boot, w/spinner/progress bar

Mac book pro mid 2009 shuts down after a few hour then will only boot after waiting and pressing power button numerous times. I am running mountain lion with most recent updates.

Mac book pro mid 2009 shuts down after a few hour of use and then is very difficult to reboot. Sometimes I have to wait hours, sometimes I have to repeatedly press the power button and then it will slowly start a little longer each press untill it completely boots. It has done this three times know. Each time I was watching a video.

Try running the Apple Hardware Test - sounds as if you've hardware issues.
Clinton

Mac Book Pro 17" 2006 version won't pick wireless signal with Airport update 7.5.2 and later.

Similar Messages

Maybe you are looking for