Mac book pro fully charged but does not power on

My Mac book  pro is fully charged but does not power on.No lights sounds...nothing!

try doing SMC reset, the following article tells how:
http://support.apple.com/kb/HT3964
if it still won't turn on try the following article:
http://support.apple.com/kb/TS1367
if neither of this helps i would take to apple store or apple service provider and have it looked at for possible repair.

Similar Messages

  • My mac book pro 17" model 1229 does not work. It askes' me to :'you need to restart your computer.Hold down Power button for several seconds or press the Restart button

    Mac book pro 17" model 1229 displaying: "you need to restart your computer. Hold down the power button for several seconds or press the Start button

    Your MBP may have had a kernel panic.  If so, post the kernel panic per these instructions:
    http://support.apple.com/kb/ht2546
    An Apple Hardware Test may be useful:
    http://support.apple.com/kb/ht1509
    Note that an error free AHT is not definitive.
    Ciao.

  • MAC BOOK PRO WITH REMOVABLE BATTERY DOES NOT REBOOT

    Every time I turn on my mac boo pro , a message appears in the screen saying "you need to restart your computer". Every time I restart my mac it takes me to the same message. I tried to remove the battery and try again and nothing. What can I do??

    What you are seeing is called a kernel panic, it is usually but not always hardware related.
    http://support.apple.com/kb/HT1392

  • IPhone 4 is fully charged but does not turn on

    I've tried a hard reset by pressing and holding both the power button and the home button on numerous occasions for different durations, and nothing. I've tried to plug it back into an outlet, and nothing. I tried plugging into my Macbook and iTunes doesn't even read the phone, still nothing. My phone was fully charged when I took it off of the charger (around 1:50 a.m.) Sunday morning, November 7, 2010 (daylight savings) and I'm not sure if that could be the issue. Please help.
    My phone is basically dead and unresponsive to all of the troubleshooting I have read about.....

    Hi Ive just had the same problem,I was playing a gamy 'my farm' & i put my iphone 4 down to answer door then when i picked it up the iphone was black screen & no power,i did plugin to itunes & the wall plug but nothing,then i held the power & home buttons down for about 6 seconds & the apple logo appeared.I really freaked,its ok right now but im phoning my apple store becoz it had 77% battery so theres something wrong with this iphone 4.
    I changed my 3gs 4 times & my original 2g 5 times,I just dont have any luck with iphones,now im worried its gonna do that again ,the game 'my farm keeps dropping out & saying no internet yet my internet connection is strong & fine,looks like we have the same problem even wen i plugged it into itunes it didnt recognise the iphone,i hope u get yours sorted

  • I need help!! my ipad air is fully charged but will not power up

    okay so I got the ipad air for Christmas I have charged it twice with no problems.  This time it will not power up on light or anything do I have to take it in to the Apple store or is there a quick fix for this type of problem.

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htmhttp://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
     Cheers, Tom

  • No sound on my mac book pro and now itunes does not play or any of my video or music files...

    Hi
    Can any one help was on the net and all of a sudden my macB pro has no sound and none of my music plays in itunes. went into the system pref under sound it shows that my output is empty and will not un mute1 please help
    stuck in iraq1

    I did try the PRAM reset several times but it appeared not to be working as when I went into info about my Mac it showed me 0 under Audio built in. I reinstalled the software update Mac os x 10.6.8 V1.1 from the apple site 2 days ago. Everything that was using audio had seemed to crash or not work all audio files, skype and itunes. When I switched on my bluetooth it would pick up my friend's pc and it would show the volume control was un muted and still no sound, I turned off the bluetooth and it would go back to being muted. I gave up and this morning miraculously it started up with sound as soon as I switched it on and everything seems to be working.
    Thanks for the help and feed back
    Sam

  • My (non Unibody) Mac book pro late 2007/08 does not want to turn on.

    Hello folks.. 
    Last night I was working on my laptop and it started to run hot.. However, today I'm trying to boot up the computer and it will not turn on.  I see the little LED light undereith the bottom part of the laptop light up and I hear something initiating, but it wont turn on.... Also, I did a upgrade to a larger hard drive (750gigs) early this year, it's been working great, but now I have this happening. 
    Any thoughts?
    Thanks in advance.

    Hi Jose, try a SMC/PRAM reset. This issue may fall under the failed nvidia 8600M GT graphics card issue which requires a logic board replacement. When did you buy the macbook pro? The nvidia replacement program includes a free repair fofr MBP's purchased 4 years from the purchase date. 

  • My mac book pro is on, but the power light indicator is not on, the battery charging light is not on, and the computer is making a whirring sound, what is wrong

    My mac book pro is working, but my power light is off, the battery power light is not on and my battery power symbol is a black x. My computer is making a whirring sound sort of like it does when  loading a CD. I had a hard time getting the computer to turn on, used the command, option, P and R buttons to turn in on. I have tried restart, but I still get the whirring sound. What is wrong and what do I do?

    Didn't do an SMC reset. But in attempting to find out about what that was I found some things to try first. Also, when I went to system preferences - hardware, I couldn't find anything regarding power and battery info. Finally, I unplugged the computer for several seconds, then shut it down, removed the battery, put the battery back in. Then I turned on the computer, plugged in the power cord. Problem solved- no whirring sound, battery charging light is on.
    Thanks for getting me in the right direction.

  • HT1338 my MAc Book PRO 13" Retina display will not update.  It crashes every time I try to do an update.  I have sent in the information on each update but so far nothing back from Apple.

    my MAc Book PRO 13" Retina display will not update.  It crashes every time I try to do an update.  I have sent in the information on each update but so far nothing back from Apple.  Also it does not matter what I am trying to update, the operating system, and application, each caused the same crash.   This mac book is less than a month old.

    That is the highest you will be able to go with 3g. You need 3gs or 4 to go any higher (multi processors and more memory needed).  Version 4.2.1 marks the end of your updates for that device.

  • My mac book pro with retina display is not gtting log in prompt. back apple logo is glowing and screen also glowing in dim but i am get getting login prompt. what shall i do for this issue?

    my mac book pro with retina display is not gtting log in prompt. back apple logo is glowing and screen also glowing in dim but i am get getting login prompt

    Gray screen at start up?
    http://support.apple.com/en-us/TS2570

  • My ipod touch is fully charged but will not turn on have tried soft reset and pluging into itunes but it does not even register it is plugged in help??

    my ipod touch is fully charged but will not turn on have tried soft reset and pluging into itunes but it does not even register it is plugged in help??

    See Here  >  Device Not Recognised  http://support.apple.com/kb/TS1538

  • My iPod Classic 120GB is clicking and not turning on. It has been charged but does not hold charge. I am not able to restore factory settings. Error code and have tried troubleshooting options without success. Thoughts?

    My iPod Classic 120GB makes a clicking noise when syncing with iTunes and will not sync. It will not turn on at this time and has been charged but does not hold the charge. After trying to sync, iTunes states that iPod must be restored. Have tried to do this but not successful, I receive an error code and have done the troubleshooting steps for the error and I am still not able to sync or use my iPod. HELP?

    Hi mafiose15,
    Thanks for visiting Apple Support Communities.
    Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
    How to restore iPod
    Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
    Download and install the latest version of iTunes if necessary.
    Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
    After a few moments, your iPod will appear in the Source panel in iTunes.
    Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
    Click Restore.
    If you are using a Mac, you will be asked to enter an administrator’s name and password.
    A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
    Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
    Leave iPod connected to computer to complete restore (typically applies newer iPod models).
    During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
    Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
    After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
    You can find the instructions in this article:
    Restoring iPod to factory settings
    http://support.apple.com/kb/ht1339
    All the best,
    Jeremy

  • I know how to turn bluetooth off and on but my mac book pro asks me to turn bluetooth power on. How do I do this?

    I know how to turn bluetooth off and on but my mac book pro asks me to turn bluetooth power on. How do I do this?

    Are you recovering Lion or later Time Machine backup with a Lion or later machine?
    If you are, then use this article:
    http://support.apple.com/kb/HT4718
    Other Time Machine restore options are here:
    http://support.apple.com/kb/ht1427
    Note, if recovering from a PowerPC Mac (iMac G5, PowerMac, Mac Mini G4, iBook, Powerbook), this tip is important:
    http://discussions.apple.com/docs/DOC-2295
    Otherwise use the recommended restore option with whatever backup software you used initially.

  • HT1752 My ices are frozen on on my Mac Book Pro vintage 1998 but bought in 2002. How do I release the icons s I can move them around ny screen /

    My icons are frozen on on my Mac Book Pro vintage 1998 but bought in 2002.

    Reworded for Macbook, iTunes, and iPad feature enhancement/software and hardware compatibility feedback and submitted this to Apple at http://www.apple.com/feedback  I did not see iBooks listed as an Apple iOS app for direct feedback.
    In addition to backing up and syncing through iTunes, please provide the ability to seamlessly open and read iBooks (a.k.a. Apple iBook Textbooks and interactive ebooks and other epub/pdf content saved in iBooks) and content purchased through the iBookstore on MacOS computers, not just iOS devices.  While the new MacbookPro with retina display and other systems are essential for various computing tasks, referencing and reading books without shifting to another device is a major purchasing and productivity factor. I can currently do this with Amazon, Google, VitalSource, and Nook books.  The ability to seamlessly move between reading books on an iOS device, MacOS computer, or within a Web browser and have integrated highlighting, notes, social sharing and other features sync between all three is highly desirable.  Without this option, I will generally need to purchase books and other content from these sources or directly from the publishers, but not Apple.
    Thank You.

  • When i connect my ipod nano 2nd gen, it charges but does not appear in windows or itunes.  I tried the reset but it didn't work.  how can i fix this?

    I bough a 4g Ipod nano 2nd gen for my cousins birthday.  When i plug it into my computer it charges but does not show up in windows or itunes.  I tried reseting it, reinstalling itunes, everything the site said but it didn't help. I am trying to sync songs to it for my cousin, but it won't work with it not connecting.  Could the wire have something to do with it or is there a bigger problem here?

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with             
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

Maybe you are looking for

  • How do I print to a certain tray, using the eprint service of the HP Color LaserJet CM4540 MFP

    Greetings, I am using the excellent eprint service, and I need to specify which tray should be used. Is this possible ? tychomoon This question was solved. View Solution.

  • Problem with task to object status mapping

    Hi, There is a task 'Create User' on which on completion changes the object status to provisioned. There is a subsequent task named 'Update form' which on rejection should change the object status back to provisioning. I have implemented this logic i

  • SWFLoader unloading problem

    I'm loading a swf into a SWFLoader. Problem is when someone doesn't want to see it anymore, I can't get rid of the swf playing. I can turn of it's visiblity, but you can still hear the audio playing. How can I unload the swf when using the SWFLoader

  • Getting code into CS3/CS4 default include path

    Hello! I have a series of AS3 classes that I want to install into the default directory that Flash looks for when, in code, one writes: import com.flashsim.FStEng.Three.*; In AS2, there is the Classes/ directory within the Configuration folder.  Very

  • Data source for Profit center wise Receivables

    Hi Friends,      Is there any data source/query for getting the Profit center wise Receivables and Cost center wise payables. please guide me to get the same. Thanks in advance Karthik