Mac hardware test and what this means
My Imac started to freeze, I tried to reinstall tiger but the install just hung. So I decided to run the hardware test and this is the error message:
4MDT/1/40000003:HDD
Does anyone know what that means or what piece of hardware is being problematic?
Can you go in OS and run disk utility ? According from your encounter that Symptom is because due to HDD crash. you are require to send to service provider for HDD replacement. If can backup all your important data before send in.
Similar Messages
-
My imac is doing strange things:
-delaying between users: when closing session it goes to blue, then takes a while to appear users signin box, and then wont recognize mouse command to enter until a couple of minutes later... then everything seems alright until....
-it gets stuck between things, the rainbow wheel appears and its just delays there forever....
-and every now and then the mouse starts flickering and bouncing wildly onscreen.
I ran the appel hardware test and it detected an error:
4MOT/4/40000003:HDD-1233
Does anybody know what that means? HELP!WZZZ answered about where to get iStat. And do check the SMART status. If it is an overheating problem due to a fan or logic board problem, your hard drive is possibly cooking itself to death. If so it isn't a faulty hard drive even though the hard drive might fail. So assuming it's a temperature problem, even if you are able to repair things on the disk with software, that is working on symptoms, not causes. I could be wrong however.
RE: AppleCare: Your iMac came with one year of AppleCare (Apple's warranty program), but within the first year you can buy 2 more years. You have to extend by the one year anniversary of purchase of the computer. Your 10,1 is too old to still be in the first year, and since you asked what it was, I'm sure you don't have it. Bottom line meaning is that whatever this problem turns out to be, you'll have to pay for it. Unless there is something like this. It is for 2011 iMacs with certain Seagate drives. You can put in your serial number for fun, but it looks like yours is too old. Lastly, some people have had Apple help them anyway if it is just out of warranty, but many have not. Your machine is one of these. Type in 10,1 in the search box. Is there an Apple Store near you? Just b/c it's out of warranty doesn't mean you shouldn't have it looked at by Apple. But no one here can say at all what Apple will or will not do.
Hope you get it taken care of! -
I ran hardware test and error 4MOT/1/40000003: HDD-1322 came up. Anyone know what this is?
I ran hardware test and error 4MOT/1/40000003: HDD-1322 came up. Anyone know what this is?
Hi guys,
I have a similar problem, the numbers at the end of the error code change a bit, when i do the apple hardware test again ( I have an imac of early 2008, 2,66 GH). I have 2 GB Ram now, after one week ago one of the 2GB-Ram sticks "died") In fact, it was working quite much, then suddenly (i bought imac in june 2009) the ram stick was broken. The apple-support center told me its probably not a problem, but did not tell me what the error code means. I have apple-care for 3 years, its a luck i did it, so they will take it and check carefully, but just after i insisted on the error. It seems they do not want to tell u what that could be....
Do u guys think the ram-stick was broken because the imac was too hot??? -
Please Help me. I am having problems with my MATSHITA UJ-857E DVD-R burner/writer. I burned 4 cd's and then it stopped working.
I can select my songs, and then it asks for a blank disc. It starts preparing to write the disc,then it says,"
The drive reported an error: Sense Key= HARDWARE ERROR Sense Code= 0x09,0x01 TRACKING SERVO FAILURE.
Can anyone give me some advice on how to fix it or what this means because I have no idea what it is talking about or how to begin to fix the problem?tanyafrombakersfield wrote:
It starts preparing to write the disc,then it says,"
The drive reported an error: Sense Key= HARDWARE ERROR Sense Code= 0x09,0x01 TRACKING SERVO FAILURE.
This is an error reported by the optical drive's firmware. The tracking servo is the servomechanism which guides the laser pickup along the track on the optical disc. The error means that the servo couldn't do its job within the programmed parameters. What it doesn't say is why.
You have to be very precise as to when this error occurs. If it occurs as you wrote, while it "starts preparing to write the disc", and not when it has actually began to burn, then it's likely that the drive has gone bad and needs to be replaced.
There are other possibilities, so you should check them, but they would be more likely if the error occurred after the drive began to write. OrangeMarlin has suggested two options -- try a different brand of CD or DVD, and try cleaning the lens. -
Hello,
I have a problem of my iMac freezing up regularly for no obvious reason.
So I ran a hardware test and it returns me only with the code 4MOT/4/40000003:HDD-1500.
I need some help to know what that means and how to repair my iMac.
WilliamWilliam, unfortunately it means your hard disk drive has or is failing and needs to be replaced. Hopefully you have a current backup or clone. You can have the drive replaced at an Apple Store or AASP or do it yourself if you're inclined by following the guide fir your specific iMac at http://www.ifixit.com/Device/Mac_Desktop
-
I ran a hardware test and this was my error
I ran a hardware test and this was my error#4MEM/40/40000006:B:1 C:0 R:1 - what does it mean?
Sure, your Mac Pro's memory is installed on two cards that you can remove, and subsequently inspect or remove the RAM. Read here to determine where it is and what to do:
http://support.apple.com/kb/HT4433
If you're lucky, merely removing and reinstalling the memory modules may clear the fault. If not, it is possible one or more of the DIMMs (Dual In-line Memory Modules) has failed or is no longer meeting the Mac Pro's requirements.
Memory is not difficult to install and is not terribly expensive. Most vendors have a lifetime guarantee. -
HT201257 Does anybody know what hardware test error code this is 4SNS/1/40000001: TCOH -1.704
Does anybody know what hardware test error code this is 4SNS/1/40000001: TCOH -1.704
Trying to track down fast running fan that will not reset and this error came up.only apple techncians have access to what those codes mean. It is sensor related, but as it is a hardware problem, you need to bring it into an Apple store or AASP to have it correctly diagnosed and fixed.
-
Safari and calendar won't open due to 'calendar persistence plug- in problems'. Does anyone know what this means and how to resolve it please?
mac book pro with Mavericks 10.9.5Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful. -
Updating ipod touch to os5.1 got an error message "cannot connect the ipod touch because the pairing record is missing" don't know what this means or how to fix but am stuck, only option is to answer ok and close the error box. Any ideas?
#1
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
#1.1 n/a because the errror message overrides it
#2 see #1
#3 iOS: Device not recognized in iTunes for Mac OS X
But could be caused by #1
#4 Covered by previous ones
#5 Obvious jpegs are photos and thus will not sync as videos. Also see:
iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
iTunes: Frequently asked questions about viewing and syncing videos
#6 iOS: If you can't back up or restore from a backup in iTunes
First #7 See #6
Second #7 You have so many other problems resolve those first
#8 Resolve other problems first -
I'm trying to burn a playlist to a blank CD-R disc at a low speed (12x) and I keep getting the error message "2131." Any idea what this means?
It's usually related to old firmware on your CD/DVD drive, but we'd better have a look at your DVD/CD tests first, just to be sure.
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here. -
I own an Imac G5. It is running very slow. Did hardware test and got an error code 2STF/8/3:S-ATABUSO-Master. What is my next step?
Also how do i run disk first aid on the computer off of the install disks? Which disk do i do it from. Thanks in advance. StuartSounds like your hard drive it about to die.
I would backup ASAP.
To run First Aid on your disk, you need to boot from the install DVD for your Mac.
After selecting the language, open Disk Utiltity and repair the disk.
If it reports errors that DU is unable to repair, report them here and we will provide additional help.
Allan -
I tried updating my iPod 5th gen to iOS 8 but it only shows me a picture of the iTunes logo and a charger at the bottom, I'm not sure what this means or what I need to do. Can someone please help me?
After restoring to factory settings/new iPod you will then have to restore from backup
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I receive the message: The file "iTunes library.itl"cannot be read because it was created by a newer version of itunes. I do not know exactly what this means. I have Windows 7 on my computer and was able access itunes until just recently. I have tried uninstalling and reinstalling itunes multiple times and that does not work. Sometimes I can get in when immediately after installing, but then if I close it, i cannot get back in. Now, i can't get in at all.
That message is usually a sign that you tried to roll back to an earlier build of iTunes, but occasionally I've seen it connected to a new upgrade. This technique should fix things.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
My safari keeps closing unexpectedly and when it does it tells me that it quite while using the .GameHouseBeachParty.so plugin. I have no idea what this means! Can someone please help me fix this?
You have the Flashback trojan.
Check out the replies in this thread for what to do;
https://discussions.apple.com/message/18114958#18114958 -
After downloading the latest version of iTunes and updating my iPhone, everytime I turn on my computer I receive a message that reads: "AppleSyncNotifier.exe - Entry Point Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite.dll" Help! Does anybody know what this means and how I can fix it? Thanks.
Yes. I just solved the problem on my PC. Here goes...
Issue: My Windows7 computer was producing the pop up box with the error text as you described.
The Problem: You have another application on your computer that uses the like named .DLL file... in this case a DLL supporting SQLite on your local PC.
Solution:
1. You need to use the Windows File search feature to look for the name "SQLite". This will quickly locate the offending DLL in the other application.
2. Decide which program you like the most, in my case "Mobile Me", and uninstall the offending application.
3. Uninstall Mobile Me.
4. Restart your PC.
5. Reinstall Mobile Me.
6. Mobile Me should sync at this point, but if not, restart the PC once again.
In my case, the offending program was my Aptana Studio development application. I had recently the SQLite3 database to my Ruby On Rails configuration...
This is where the file was located:
C:\Users\<USERNAME>\Aptana Studio 2.0\plugins\com.aptana.radrails.sqlite3.win32_3.5.7.1278709071\vendor\SQLite3.d ll
I hope this helps,
Ron
Maybe you are looking for
-
Can I use Remote Desktop to run Windows software from my Mac
Here's what I want to do: 1) Set up a small office LAN with an Apple Xserve as the file server; clients are mostly iMacs but a few PCs. 2) There are one or two software apps I need that exist only in the Windows world (such as a good document compari
-
Convert doc file generated by OpenOffice to PDF X1a
Hi, I have a .doc file originally produced by Open Office Writer and then converted to a Word format. I would now like to use Acrobat 10 to convert this .doc file to a PDF X format, but I'm not having any luck. I've tried the following two approaches
-
New column header on Interactive Report
We have an interactive report on a view and when we add a new column to the view, we would need the report to add the header automatically too (without previous deployment). Can this be done in simple manner? Thanks, Ricardo
-
100000% every time I discover a new feature in pro7 i'm like 'oh i love this so much'
-
Hi , Is there any standard ABAP program available in the system to find the obsolete statements in the given custom program?. Is there any table available in ths sytem to store the list of obsolete statements? Is there any table available in the syst