Mac is unresponsive upon wake after Yosemite install

I have a relatively new Mac Mini with a bluetooth track pad and wireless keyboard. Since installing Yosemite my Mac will wake when I hit any key on the keyboard and the cursor will move across the screen, but I cannot select anything, if I try to open Spotlight or Tab with the keyboard nothing happens and I end up having to hard shutdown my computer and restart it to get anything to work.
I was NOT having this problem before installing Yosemite. Has anyone else seen this issue and found a solution?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

  • My Mac desktop is incredibly slow after I installed Yosemite - any suggestions?

    My Mac desktop is incredibly slow after I installed Yosemite - any suggestions?  Thanks

    Problem description:
    After installing Yosemite, my MAC desktop is incredibly slow - particularly when using the internet.
    EtreCheck version: 2.0.11 (98)
    Report generated November 9, 2014 at 6:37:47 PM EST
    Hardware Information: ℹ️
      iMac (27-inch, Late 2009) (Verified)
      iMac - model: iMac10,1
      1 3.06 GHz Intel Core 2 Duo CPU: 2-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      empty empty empty empty
      BANK 1/DIMM0
      empty empty empty empty
      BANK 0/DIMM1
      2 GB DDR3 1067 MHz ok
      BANK 1/DIMM1
      2 GB DDR3 1067 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      ATI Radeon HD 4670 - VRAM: 256 MB
      iMac 2560 x 1440
    System Software: ℹ️
      OS X 10.10 (14A389) - Uptime: 6:47:56
    Disk Information: ℹ️
      Hitachi HDE721010SLA330 disk0 : (1 TB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) /  [Startup]: 999.35 GB (792.07 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      OPTIARC DVD RW AD-5680H 
    USB Information: ℹ️
      Apple Inc. iPod 79.82 GB
      S.M.A.R.T. Status: Verified
      disk2s1 (disk2s1) <not mounted> : 254 KB
      David L. Medeck’s iPod (disk2s2) /Volumes/David L. Medeck’s iPod : 79.82 GB (66.57 GB free)
      Apple Inc. Built-in iSight
      Apple Internal Memory Card Reader
      Iomega External HD 250.06 GB
      S.M.A.R.T. Status: Verified
      Iomega_HDD (disk1s1) /Volumes/Iomega_HDD : 250.06 GB (198.93 GB free)
      Apple Computer, Inc. IR Receiver
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /System/Library/Extensions
      [not loaded] com.devguru.driver.PTUMWDrv (10.5.24) Support
      [not loaded] com.novatelwireless.driver.3G (3.0.7) Support
      [not loaded] com.novatelwireless.driver.DisableAutoInstall (2.0.6) Support
      [not loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.40) Support
      [not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.40) Support
      [not loaded] com.sierrawireless.driver.SierraDevSupport (2.0.2) Support
      [not loaded] com.sierrawireless.driver.SierraFSCSupport (2.0.2) Support
      [not loaded] com.sierrawireless.driver.SierraFSRSupport (2.0.2) Support
      [not loaded] com.sierrawireless.driver.SierraHSRSupport (2.0.2) Support
      [not loaded] com.smithmicro.driver.SMSIWirelessModem (3.2.7) Support
      /System/Library/Extensions/NovatelWireless3G.kext/Contents/PlugIns
      [not loaded] com.novatelwireless.driver.3GData (3.0.7) Support
      /System/Library/Extensions/PTUMWDrv.kext/Contents/PlugIns
      [not loaded] com.devguru.driver.PTUMWCDFree (10.5.24) Support
      [not loaded] com.devguru.driver.PTUMWCSP (10.5.24) Support
      [not loaded] com.devguru.driver.PTUMWDIAG (10.5.24) Support
      [not loaded] com.devguru.driver.PTUMWMdmControl (10.5.24) Support
      [not loaded] com.devguru.driver.PTUMWMdmData (10.5.24) Support
      [not loaded] com.devguru.driver.PTUMWUSBMergeNub (10.5.24) Support
      /System/Library/Extensions/SMSIWirelessModem.kext/Contents/PlugIns
      [not loaded] com.smithmicro.driver.SMSIWirelessCDC (3.2.7) Support
      [not loaded] com.smithmicro.driver.SMSIWirelessSerial (3.2.7) Support
    Launch Agents: ℹ️
      [running] com.epson.Epson_Low_Ink_Reminder.launcher.plist Support
      [running] com.epson.eventmanager.agent.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.macpaw.CleanMyMac2.Agent.plist Support
    User Launch Agents: ℹ️
      [not loaded] com.macpaw.CleanMyMac.helperTool.plist Support
      [not loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist Support
      [not loaded] com.macpaw.CleanMyMac.volumeWatcher.plist Support
      [loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
      [loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
      [loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
      [loaded] ltcm.plist Support
    User Login Items: ℹ️
      Garmin Express Service Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
      vzwwirelessd Application (/Applications/VZAccess Manager.app/Contents/PlugIns/vzwwirelessd.app)
      HPEventHandler Application (/Library/Printers/hp/hpio/HPEventHandler.app)
      HP Scheduler UNKNOWN (missing value)
    Internet Plug-ins: ℹ️
      JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
      FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
      Default Browser: Version: 600 - SDK 10.10
      GarminGpsControl: Version: 4.0.4.0 Release - SDK 10.6 Support
      Silverlight: Version: 4.0.60531.0 Support
      iPhotoPhotocast: Version: 7.0
    User Internet Plug-ins: ℹ️
      WebEx64: Version: 1.0 - SDK 10.5 Support
    Safari Extensions: ℹ️
      Adblock Plus
    3rd Party Preference Panes: ℹ️
      Flash Player  Support
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          3% WindowServer
          0% fontd
          0% AppleSpell
          0% askpermissiond
    Top Processes by Memory: ℹ️
      163 MB iTunes
      159 MB Safari
      146 MB softwareupdated
      133 MB Finder
      129 MB Quicken Essentials
    Virtual Memory Information: ℹ️
      58 MB Free RAM
      1.90 GB Active RAM
      1.85 GB Inactive RAM
      487 MB Wired RAM
      6.16 GB Page-ins
      2 MB Page-outs

  • Monitors flickering badly after Yosemite Install

    Monitor flickering badly after Yosemite installed
    I will be awaiting upDated drivers in a release soon.
    I notice is very badly when I connect my iphone to ITunes screen
    goes crazy flicker. . . . Anyone else having this issue ?

    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
         computer and after the chime press and hold down the OPTION key until the boot manager
         screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • Keeps crashing after Yosemite install - Need thoughts on what to do...

    My 2013 Macbook Air keeps crashing after Yosemite install, time between crashes are more random than consistent and it can be anytginh from one hour to 6 hours between crashes. Enclosed the report below with the hope that someone has some tips on what to do here.... I've formatted the computer, reinstalled the OS and checked the drive for errors and I've found nothing so far.
    Would be very grateful for any thoughts/tips on what to do here...
    Anonymous UUID:       BEEFE0EB-6E39-4774-2F21-C8DB361123F7
    Tue Oct 21 23:43:49 2014
    *** Panic Report ***
    panic(cpu 0 caller 0xffffff8007d7a590): "a freed zone element has been modified in zone kalloc.1024: expected 0xdb989f771eb1bbd8 but found 0x60002, bits changed 0xdb989f771eb7bbda, at offset 0 of 1024 in element 0xffffff8018915c00, cookies 0x3f0011f6db804ed8 0x5352198c01c0537"@/SourceCache/xnu/xnu-2782.1.97/osfmk/kern/zalloc.c:496
    Backtrace (CPU 0), Frame : Return Address
    0xffffff81102c32d0 : 0xffffff8007d3a811
    0xffffff81102c3350 : 0xffffff8007d7a590
    0xffffff81102c33c0 : 0xffffff8007d79c17
    0xffffff81102c3400 : 0xffffff8007d78de7
    0xffffff81102c3530 : 0xffffff800813160e
    0xffffff81102c36d0 : 0xffffff800812aab9
    0xffffff81102c3760 : 0xffffff8008140ccf
    0xffffff81102c3930 : 0xffffff8007f3f2f8
    0xffffff81102c3a10 : 0xffffff8007f3ea95
    0xffffff81102c3b40 : 0xffffff8007f52005
    0xffffff81102c3b90 : 0xffffff8007f62505
    0xffffff81102c3d90 : 0xffffff8007f56d87
    0xffffff81102c3f50 : 0xffffff800824dcb2
    0xffffff81102c3fb0 : 0xffffff8007e3ac46
    BSD process name corresponding to current thread: PhotoStreamAgent
    Mac OS version:
    14A389
    Kernel version:
    Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
    Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
    Kernel slide:     0x0000000007a00000
    Kernel text base: 0xffffff8007c00000
    __HIB  text base: 0xffffff8007b00000
    System model name: MacBookAir6,1 (Mac-35C1E88140C3E6CF)
    System uptime in nanoseconds: 16215962667183
    last loaded kext at 9812882932706: com.apple.filesystems.smbfs 3.0.0 (addr 0xffffff7f8a0e1000, size 389120)
    last unloaded kext at 1736098368348: com.apple.driver.AppleUSBCDC 4.2.2b5 (addr 0xffffff7f895e6000, size 16384)
    loaded kexts:
    com.apple.filesystems.smbfs 3.0.0
    com.apple.driver.AppleBluetoothMultitouch 85.3
    com.apple.iokit.SCSITaskUserClient 3.7.0
    com.apple.iokit.IOBluetoothSerialManager 4.3.0f10
    com.apple.driver.AudioAUUC 1.70
    com.apple.iokit.IOUserEthernet 1.0.1
    com.apple.driver.AppleUpstreamUserClient 3.6.1
    com.apple.driver.AGPM 100.14.37
    com.apple.driver.ApplePlatformEnabler 2.1.0d1
    com.apple.driver.X86PlatformShim 1.0.0
    com.apple.Dont_Steal_Mac_OS_X 7.0.0
    com.apple.driver.AppleIntelHD5000Graphics 10.0.0
    com.apple.driver.AppleHDA 266.5
    com.apple.driver.AppleHWAccess 1
    com.apple.driver.AppleOSXWatchdog 1
    com.apple.driver.AppleLPC 1.7.3
    com.apple.driver.AppleThunderboltIP 2.0.2
    com.apple.driver.AppleBacklight 170.4.12
    com.apple.driver.AppleUSBEthernet 2.4.7
    com.apple.driver.AppleHV 1
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.0f10
    com.apple.driver.AppleSMCLMU 2.0.4d1
    com.apple.driver.AirPort.Brcm4360 900.19.8
    com.apple.driver.AppleCameraInterface 5.23.0
    com.apple.driver.AppleMCCSControl 1.2.10
    com.apple.driver.AppleIntelFramebufferAzul 10.0.0
    com.apple.filesystems.autofs 3.0
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
    com.apple.BootCache 35
    com.apple.driver.AppleUSBHub 705.4.1
    com.apple.driver.AppleTopCaseHIDEventDriver 46.2
    com.apple.driver.XsanFilter 404
    com.apple.iokit.IOAHCIBlockStorage 2.6.5
    com.apple.driver.AppleAHCIPort 3.0.7
    com.apple.driver.AppleUSBXHCI 705.4.14
    com.apple.driver.AppleRTC 2.0
    com.apple.driver.AppleSmartBatteryManager 161.0.0
    com.apple.driver.AppleACPIButtons 3.1
    com.apple.driver.AppleHPET 1.8
    com.apple.driver.AppleSMBIOS 2.1
    com.apple.driver.AppleACPIEC 3.1
    com.apple.driver.AppleAPIC 1.7
    com.apple.nke.applicationfirewall 161
    com.apple.security.quarantine 3
    com.apple.security.TMSafetyNet 8
    com.apple.driver.IOBluetoothHIDDriver 4.3.0f10
    com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.0
    com.apple.iokit.IOUSBMassStorageClass 3.7.0
    com.apple.iokit.IOSurface 97
    com.apple.driver.DspFuncLib 266.5
    com.apple.kext.OSvKernDSPLib 1.15
    com.apple.iokit.IOAudioFamily 200.6
    com.apple.vecLib.kext 1.2.0
    com.apple.driver.AppleBacklightExpert 1.1.0
    com.apple.iokit.IONDRVSupport 2.4.1
    com.apple.driver.AppleHDAController 266.5
    com.apple.iokit.IOHDAFamily 266.5
    com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.0f10
    com.apple.iokit.IOBluetoothFamily 4.3.0f10
    com.apple.iokit.IO80211Family 700.52
    com.apple.driver.mDNSOffloadUserClient 1.0.1b8
    com.apple.iokit.IONetworkingFamily 3.2
    com.apple.iokit.IOSerialFamily 11
    com.apple.driver.X86PlatformPlugin 1.0.0
    com.apple.driver.AppleSMC 3.1.9
    com.apple.driver.IOPlatformPluginFamily 5.8.0d49
    com.apple.driver.AppleSMBusController 1.0.13d1
    com.apple.AppleGraphicsDeviceControl 3.7.21
    com.apple.iokit.IOAcceleratorFamily2 156.4
    com.apple.iokit.IOGraphicsFamily 2.4.1
    com.apple.kext.triggers 1.0
    com.apple.iokit.IOUSBUserClient 705.4.0
    com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.0
    com.apple.driver.AppleUSBMergeNub 705.4.0
    com.apple.driver.AppleUSBComposite 705.4.9
    com.apple.driver.CoreStorage 471
    com.apple.driver.AppleHIDKeyboard 175.5
    com.apple.driver.AppleHSSPIHIDDriver 26.2
    com.apple.driver.AppleMultitouchDriver 260.30
    com.apple.iokit.IOAHCIFamily 2.7.0
    com.apple.driver.AppleThunderboltDPInAdapter 4.0.6
    com.apple.driver.AppleThunderboltDPAdapterFamily 4.0.6
    com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2
    com.apple.driver.AppleThunderboltNHI 3.1.7
    com.apple.iokit.IOThunderboltFamily 4.2.1
    com.apple.driver.AppleHSSPISupport 26.2
    com.apple.driver.AppleIntelLpssSpiController 2.0.45
    com.apple.driver.AppleIntelLpssDmac 2.0.45
    com.apple.driver.AppleIntelLpssGspi 2.0.45
    com.apple.iokit.IOUSBFamily 705.4.14
    com.apple.driver.AppleEFINVRAM 2.0
    com.apple.driver.AppleEFIRuntime 2.0
    com.apple.iokit.IOHIDFamily 2.0.0
    com.apple.iokit.IOSMBusFamily 1.1
    com.apple.security.sandbox 300.0
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.driver.AppleKeyStore 2
    com.apple.driver.AppleMobileFileIntegrity 1.0.5
    com.apple.driver.AppleCredentialManager 1.0
    com.apple.driver.DiskImages 389.1
    com.apple.iokit.IOStorageFamily 2.0
    com.apple.iokit.IOReportFamily 31
    com.apple.driver.AppleFDEKeyStore 28.30
    com.apple.driver.AppleACPIPlatform 3.1
    com.apple.iokit.IOPCIFamily 2.9
    com.apple.iokit.IOACPIFamily 1.4
    com.apple.kec.Libm 1
    com.apple.kec.corecrypto 1.0
    com.apple.kec.pthread 1
    Model: MacBookAir6,1, BootROM MBA61.0099.B16, 2 processors, Intel Core i7, 1.7 GHz, 8 GB, SMC 2.12f143
    Graphics: Intel HD Graphics 5000, Intel HD Graphics 5000, Built-In
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x483943434E4E4E384A544D4C41522D4E544D
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x483943434E4E4E384A544D4C41522D4E544D
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x117), Broadcom BCM43xx 1.0 (7.15.124.12.8)
    Bluetooth: Version 4.3.0f10 14890, 3 services, 27 devices, 1 incoming serial ports
    Network Service: Wi-Fi, AirPort, en0
    Serial ATA Device: APPLE SSD SM0512F, 500,28 GB
    USB Device: My Passport 0824
    USB Device: BRCM20702 Hub
    USB Device: Bluetooth USB Host Controller
    Thunderbolt Bus: MacBook Air, Apple Inc., 23.6

    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Lion, Mountain Lion, or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • Messages stuck in updating after Yosemite install

    Messages stuck in updating after Yosemite install.  Tried re-install of Yosemite and quit messages, still unable to access.

    Hi,
    Go to the ~/Library/Attachments folder.  (well it should be a folder).
    If it is not a Folder then rename it and create a New folder with the same name.
    restart Messages.
    Or if you have a Time Machine backup replace the Non folder item with an Original from just before the update.
    9:22 pm      Saturday; January 17, 2015
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Very long shutdown time after Yosemite install

    After installing Yosemite my Macbookpro has shutdown times of over more than 5 minutes. This is what i got from Etrecheck.
    Problem description:
    very long shutdown time after yosemite install
    EtreCheck version: 2.1.8 (121)
    Report generated 19 Feb 2015 01:19:39 CET
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (15-inch, Early 2011) (Technical Specifications)
        MacBook Pro - model: MacBookPro8,2
        1 2 GHz Intel Core i7 CPU: 4-core
        8 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 868
    Video Information: ℹ️
        Intel HD Graphics 3000 - VRAM: 512 MB
        AMD Radeon HD 6490M - VRAM: 256 MB
            Color LCD 1440 x 900
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: one day 7:40:33
    Disk Information: ℹ️
        Hitachi HTS545050B9A302 disk0 : (500,11 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 498.88 GB (90.86 GB free)
                Core Storage: disk0s2 499.25 GB Online
        MATSHITADVD-R   UJ-898
    USB Information: ℹ️
        Apple Computer, Inc. IR Receiver
        Apple Inc. FaceTime HD Camera (Built-in)
        LaCie LaCie Device 500,11 GB
            EFI (disk2s1) <not mounted> : 210 MB
            MINI DAVID HDD (disk2s2) /Volumes/MINI DAVID HDD : 499.76 GB (62.48 GB free)
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. Apple Internal Keyboard / Trackpad
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Configuration files: ℹ️
        /etc/sysctl.conf - Exists
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Applications/Karabiner.app
        [not loaded]    org.pqrs.driver.Karabiner (10.2.0 - SDK 10.9) [Click for support]
            /Library/Parallels/Parallels Service.app
        [not loaded]    com.parallels.kext.prl_hid_hook (7.0 15106.786747) [Click for support]
        [not loaded]    com.parallels.kext.prl_hypervisor (7.0 15106.786747) [Click for support]
        [not loaded]    com.parallels.kext.prl_netbridge (7.0 15106.786747) [Click for support]
        [not loaded]    com.parallels.kext.prl_usb_connect (7.0 15106.786747) [Click for support]
        [not loaded]    com.parallels.kext.prl_vnic (7.0 15106.786747) [Click for support]
            /System/Library/Extensions
        [not loaded]    com.Avid.driver.AvidDX (4.7.1) [Click for support]
        [loaded]    com.Cycling74.driver.Soundflower (1.5.1) [Click for support]
        [not loaded]    com.SafeNet.driver.Sentinel (7.3.0) [Click for support]
        [not loaded]    com.avid.driver.Avid_SCSI (1.2.0) [Click for support]
        [not loaded]    com.avid.driver.Avid_SCSI_RBC (1.2.0) [Click for support]
        [loaded]    com.cisco.kext.acsock (1.1.0 - SDK 10.2) [Click for support]
        [not loaded]    com.digidesign.fwfamily.driver (8.0.4f1) [Click for support]
        [not loaded]    com.digidesign.mbox2.boot.driver (8.0.4f1) [Click for support]
        [not loaded]    com.digidesign.mbox2.driver (8.0.4f1) [Click for support]
        [not loaded]    com.freecom.driver.BoulderScsi (1.0.0d1) [Click for support]
        [not loaded]    com.metakine.handsoff.driver (2.0.8 - SDK 10.6) [Click for support]
        [not loaded]    com.nvidia.CUDA (1.1.0) [Click for support]
        [not loaded]    com.paceap.kext.PACESupport (5.7.2b8) [Click for support]
        [not loaded]    com.paceap.kext.PACESupport2 (5.7.2b8) [Click for support]
        [not loaded]    com.paceap.kext.pacesupport.master (5.7.2b8) [Click for support]
        [loaded]    com.rogueamoeba.HermesAudio (3.0.1) [Click for support]
        [not loaded]    com.sony.filesystems.pdudf (4.03.0d006 - SDK 10.6) [Click for support]
        [not loaded]    com.sony.filesystems.pdudfr (4.03.0d006 - SDK 10.6) [Click for support]
        [not loaded]    com.sony.scsi.PDW-U1 (4.03.0d006 - SDK 10.6) [Click for support]
        [not loaded]    com.wacom.kext.pentablet (5.3.5 - SDK 10.9) [Click for support]
            /System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
        [not loaded]    com.paceap.kext.pacesupport.leopard (5.7.2b8) [Click for support]
        [not loaded]    com.paceap.kext.pacesupport.panther (5.7.2b8) [Click for support]
        [loaded]    com.paceap.kext.pacesupport.snowleopard (5.7.2b8) [Click for support]
        [not loaded]    com.paceap.kext.pacesupport.tiger (5.7.2b8) [Click for support]
    Startup Items: ℹ️
        ciscod: Path: /System/Library/StartupItems/ciscod
        CUDA: Path: /System/Library/StartupItems/CUDA
        Digidesign Mbox 2: Path: /Library/StartupItems/Digidesign Mbox 2
        DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
        PACESupport: Path: /Library/StartupItems/PACESupport
        ProTecVb: Path: /Library/StartupItems/ProTecVb
        Startup items are obsolete in OS X Yosemite
    Problem System Launch Daemons: ℹ️
        [unknown]    c om.apple.coreservices.appleevents.plist [Click for support]
        [unknown]    c om.apple.diskarbitrationd.plist [Click for support]
        [unknown]    c om.apple.mDNSResponder.plist [Click for support]
        [unknown]    co m.apple.securityd.plist [Click for support]
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.CS5ServiceManager.plist [Click for support]
        [loaded]    com.cisco.anyconnect.gui.plist [Click for support]
        [running]    com.epson.epw.agent.plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [running]    com.metakine.handsoff.agent.plist [Click for support]
        [loaded]    com.nvidia.CUDASoftwareUpdate.plist [Click for support]
        [failed]    com.parallels.desktop.launch.plist [Click for support]
        [loaded]    com.parallels.DesktopControlAgent.plist [Click for support]
        [running]    com.parallels.vm.prl_pcproxy.plist [Click for support]
        [running]    com.wacom.pentablet.plist [Click for support]
        [running]    net.culater.SIMBL.Agent.plist [Click for support]
        [loaded]    org.macosforge.xquartz.startx.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [failed]    com.autodesk.backburner_manager.plist [Click for support]
        [running]    com.autodesk.backburner_server.plist [Click for support]
        [failed]    com.autodesk.backburner_start.plist [Click for support]
        [running]    com.cisco.anyconnect.vpnagentd.plist [Click for support]
        [running]    com.digidesign.fwfamily.helper.plist [Click for support]
        [running]    com.edb.launchd.postgresql-8.4.plist [Click for support]
        [loaded]    com.google.keystone.daemon.plist [Click for support]
        [running]    com.metakine.handsoff.daemon.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [running]    com.parallels.desktop.launchdaemon.plist [Click for support]
        [loaded]    com.rogueamoeba.hermes.plist [Click for support]
        [loaded]    com.rogueamoeba.instanton-agent.plist [Click for support]
        [loaded]    org.macosforge.xquartz.privileged_startx.plist [Click for support]
        [loaded]    PACESupport.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    User Login Items: ℹ️
        Google Chrome    Application Hidden (/Applications/Google Chrome.app)
    Internet Plug-ins: ℹ️
        o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
        Google Earth Web Plug-in: Version: 7.0 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        Flip4Mac WMV Plugin: Version: 2.3.8.1 [Click for support]
        WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.6 - SDK 10.9 [Click for support]
        Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
        SharePointBrowserPlugin: Version: 14.3.8 - SDK 10.6 [Click for support]
        iPhotoPhotocast: Version: 7.0
        JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
    User internet Plug-ins: ℹ️
        Picasa: Version: 1.0 - SDK 10.4 [Click for support]
    Audio Plug-ins: ℹ️
        DVCPROHDAudio: Version: 1.3.2
    3rd Party Preference Panes: ℹ️
        CUDA Preferences  [Click for support]
        DigidesignMbox2  [Click for support]
        Digidesign Mbox 2 Pro  [Click for support]
        Flash Player  [Click for support]
        Flip4Mac WMV  [Click for support]
        MacFUSE  [Click for support]
        Perian  [Click for support]
        PenTablet  [Click for support]
        XDCAM Drive Monitor  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: ON
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 498.88 GB Disk used: 408.02 GB
        Destinations:
            Time Capsule [Local]
            Total size: 799.52 GB
            Total number of backups: 18
            Oldest backup: 2014-11-12 02:44:18 +0000
            Last backup: 2015-02-17 14:14:45 +0000
            Size of backup disk: Too small
                Backup size 799.52 GB < (Disk used 408.02 GB X 3)
    Top Processes by CPU: ℹ️
            20%    mds
             5%    WindowServer
             2%    Google Chrome
             1%    launchd
             1%    prl_disp_service
    Top Processes by Memory: ℹ️
        515 MB    Final Cut Pro
        378 MB    softwareupdated
        309 MB    Google Chrome
        215 MB    Google Chrome Helper
        206 MB    mds_stores
    Virtual Memory Information: ℹ️
        220 MB    Free RAM
        3.56 GB    Active RAM
        3.34 GB    Inactive RAM
        1.45 GB    Wired RAM
        7.56 GB    Page-ins
        4 MB    Page-outs
    Diagnostics Information: ℹ️
        Feb 18, 2015, 04:35:18 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-02-18-163518_[redacted].crash
        Feb 18, 2015, 04:29:01 PM    /Library/Logs/DiagnosticReports/backburnerManager_2015-02-18-162901_[redacted]. crash
        Feb 18, 2015, 04:11:30 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-02-18-161130_[redacted].crash
        Feb 18, 2015, 04:04:44 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-02-18-160444_[redacted].crash
        Feb 18, 2015, 01:49:37 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-02-18-134937_[redacted].crash
        Feb 17, 2015, 05:36:32 PM    Self test - passed

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Shut down from safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • PLEASE HELP ME - I am not very tech savy and I thought I hadn't installed Mac OS X Snow leopard .After I installed it I went to tether with my Iphone but Itunes wont even recognise it and no one will help me ;-(

    I am not very tech savy & I thought I hadn't installed Mac OS X Snow leopard .After I installed it I went to tether with my Iphone but Itunes wont even recognise it and no one will help me

    krystiefrommorayfield wrote:
    I am not very tech savy & I thought I hadn't installed Mac OS X Snow leopard .After I
    installed it I went to tether with my Iphone but Itunes wont even recognise it and no one will help me
    You connect your iPhone to iTunes through the Sync Process...
    See Here
    Syncing with iTunes
    From Here
    http://www.apple.com/support/iphone/syncing/
    http://www.apple.com/support/iphone/

  • My MacBook Pro's internal SuperDrive has stopped recognizing CDs/DVDs after Yosemite install

    After upgrading to Yosemite, my MacBook Pro's (early 2011) internal SuperDrive has stopped recognizing CDs/DVDs after Yosemite install. It takes them in and will eject them with the keyboard button, but they will not mount. Disk Utility shows the SuperDrive and shows the inserted media, but will not mount the disk. That button is grayed out. Please help! I still have training libraries and music I access on such media. Thx!

    UPDATE: I discovered some forum posts about a similar issue with Mavericks that recommended re-installing the system to fix the problem. I realized that I rarely restart my computer unless there's an update that requires it, and decided before undertaking a full re-install of Yosemite to simply restart my computer again. THIS WORKED! The SuperDrive is now mounting CDs and DVDs. Not sure what the issue was, but if anyone else has this issue I hope this will save you hours of frustration.

  • My computer is running slow after Yosemite install -but in the Mail program, when I open an email and then open the attachment -all is good -when I close the attachment the Mail program goes away, and I have to reopen it in my Dock -every time -been

    My computer is running slow after Yosemite install -but in the Mail program, when I open an email and then open the attachment -all is good -when I close the attachment the Mail program goes away, and I have to reopen it in my Dock -every time.

    I tried this, but no luck. I went to Previous System>Users. There is nothing inside the "Users" folder, so I hit a dead end.
    I can find my new e-mails -- those that came in since I re-installed the system -- in my NEW system (which I did to see if I was correctly understanding the advice), by going to Users>Home>Library>Mail>POP account name>Inbox.
    Let me add a new question: I am running PhotoShop C3. It opens OK, and I can use it, but when it opens I get this message: "One or more files for Adobe Application Support folder are missing. Please re-run the PhotoShop installer."
    I don't like re-installing working programs if I can avoid it, because it always seems to lead to other issues. Any idea what files are missing, and where it/they might be in the Previous System folder?
    thanks
    Mike

  • My display is non hdcp compliant after Yosemite install

    My display is non hdcp compliant after Yosemite install, fix this?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Unable to bootup after Yosemite install. have to keep shutting down from rear button. it does come on after a few times but then hangs at user login again. If you get in it is great. Seems faster than Mavericks but there is some sort of issue, bouts

    unable to bootup after Yosemite install. have to keep shutting down from rear button. it does come on after a few times but then hangs at user login again. If you get in it is great. Seems faster than Mavericks but there is some sort of issue, bootup /login.

    Knock on wood, this seems to have been my problem as well.  I stumbled on this thread after dealing with this ridiculously-long boot times for the past several weeks.
    I just reinstalled McAfee Antivirus and my Macbook Air booted up in less than 1 minute.  No more hanging on the boot-up progress bar.  No more hanging after I click on my user's avatar on the log-in screen.  Bootup would often take 5+ minutes and sometimes never complete.
    This has been SUPREMELY frustrating.
    THANK YOU SO MUCH FOR POSTING YOUR RESPONSE!!!

  • Plugin sandbox errors after yosemite install

    After Yosemite install I see MANY errors in my system.log like this:
    Oct 20 11:04:35 Yumi.local pkd[366]: ignoring mis-configured plug-in at /System/Library/PrivateFrameworks/ShareKit.framework/Versions/A/PlugIns/AirDrop .appex: plug-ins must be sandboxed
    Oct 20 11:04:35 Yumi.local pkd[366]: ignoring mis-configured plug-in at /System/Library/PrivateFrameworks/ShareKit.framework/Versions/A/PlugIns/Faceboo kProfilePic.appex: plug-ins must be sandboxed
    Oct 20 11:04:35 Yumi.local pkd[366]: ignoring mis-configured plug-in at /System/Library/PrivateFrameworks/ShareKit.framework/Versions/A/PlugIns/FlickrI mage.appex: plug-ins must be sandboxed
    Oct 20 11:04:35 Yumi.local pkd[366]: ignoring mis-configured plug-in at /System/Library/PrivateFrameworks/ShareKit.framework/Versions/A/PlugIns/LinkedI n.appex: plug-ins must be sandboxed
    Oct 20 11:04:35 Yumi.local pkd[366]: ignoring mis-configured plug-in at /System/Library/PrivateFrameworks/ShareKit.framework/Versions/A/PlugIns/ShareMa il.appex: plug-ins must be sandboxed
    Oct 20 11:04:35 Yumi.local pkd[366]: ignoring mis-configured plug-in at /System/Library/PrivateFrameworks/ShareKit.framework/Versions/A/PlugIns/ShareMe ssages.appex: plug-ins must be sandboxed
    Oct 20 11:04:35 Yumi.local pkd[366]: ignoring mis-configured plug-in at /System/Library/PrivateFrameworks/ShareKit.framework/Versions/A/PlugIns/SinaWei bo.appex: plug-ins must be sandboxed
    Oct 20 11:04:35 Yumi.local pkd[366]: ignoring mis-configured plug-in at /System/Library/PrivateFrameworks/ShareKit.framework/Versions/A/PlugIns/SystemA ddToiPhoto.appex: plug-ins must be sandboxed
    Oct 20 11:04:35 Yumi.local pkd[366]: ignoring mis-configured plug-in at /System/Library/PrivateFrameworks/ShareKit.framework/Versions/A/PlugIns/SystemS etAccountPicture.appex: plug-ins must be sandboxed
    Oct 20 11:04:35 Yumi.local pkd[366]: ignoring mis-configured plug-in at /System/Library/PrivateFrameworks/ShareKit.framework/Versions/A/PlugIns/SystemS etDesktopImage.appex: plug-ins must be sandboxed
    Oct 20 11:04:35 Yumi.local pkd[366]: ignoring mis-configured plug-in at /System/Library/PrivateFrameworks/ShareKit.framework/Versions/A/PlugIns/Tudou.a ppex: plug-ins must be sandboxed
    Oct 20 11:04:35 Yumi.local pkd[366]: ignoring mis-configured plug-in at /System/Library/PrivateFrameworks/ShareKit.framework/Versions/A/PlugIns/Twitter ProfilePic.appex: plug-ins must be sandboxed
    Oct 20 11:04:35 Yumi.local pkd[366]: ignoring mis-configured plug-in at /System/Library/PrivateFrameworks/ShareKit.framework/Versions/A/PlugIns/Youku.a ppex: plug-ins must be sandboxed
    It goes for many software, like ShareKit.framework, SceneKit.framework, NotificationCenter.framework, Preview.app, Calendar.app, Reminders.app etc. - all of them are Apple software. I get it like every 1 minute in log.
    Google didn't help. What is it, what does it means and how to fix?..

    Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
    First, empty the Trash.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Triple-click anywhere in the line below to select it, then drag or copy it — do not type — into the Terminal window:
    find . $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 -o -acl \) -exec ls -Odel {} \; | wc -l
    Press return. The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    The output of this command, on a line directly below what you entered, will be a number such as "85." Please post it in a reply.

  • Bootcamp Wont Load After Yosemite Install

    Loner T,
    My bootcamp does not load after Yosemite install.
    Thanks

    This is the first part of the recovery procedure. In your case, you have two OS X versions, so standard layout is not usable.
    Please install GPT Fdisk (aka gdisk) (http://sourceforge.net/projects/gptfdisk/) if you have not done so yet.
    You need to use the following steps. If you see any error messages during the following steps, please stop and post back here with the error message. The following steps have values from your Testdisk output (and you can verify) in Steps 7 and 8.
    Rebuild GPT5 using start/end offsets
    Sudo gdisk /dev/rdisk0
    P  (print the full list of parts)
    D  (delete)
    5  (part 5)
    N  (new part)
    5   (part 5)
    841717760 - Start offset in bytes  (start point for Bootcamp part)
    +135055353 (Size offset as opposed to End offset)
    0700     (Windows part type)
    P           (print list of all parts just to see what changes will be made)
    W         (Write the new GPT)
    Y           (Yes! really write the new GPT)
      This will delete and re-write the GPT partition info for /dev/disk0s5.
    Reboot. Test that you can see the Bootcamp volume in Finder and see files in the Bootcamp volume.

  • Messages font is missing after Yosemite install

    Hi everyone,
    I installed Yosemite and a few days later when using Messages I noticed that a font seems to be missing in the UI window to the right of the person's name.
    I don't remember what this line of text is for but it's clearly missing from the main system fonts library and I can only assume this happened after the Yosemite install since everything was fine before this.
    Can anyone identify what that typeface was/is ?
    here's a screengrab:

    For others.
    You needs AppleGothic (this is involved in logging in the iMessages account)
    Helvetica Neue  - this displays the text in the Chats/Conversations.
    Lucida Grande is used when displaying the Buddy Lists for the Group title bars.
    This bit that is "wrong" in the pic is the Date item for each chat.
    This may be Lucida Grande as well but I cannot disable the Font to check.
    8:25 pm      Tuesday; April 14, 2015
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Slow MBP after Yosemite install and other concerns

    Hi
    There are a few discussions on this topic, they did not help due to the fact that I have no clue what to do or if I even have a problem.
    The problem:
    My MBP is slower after I installed Yosemite, sometimes the wheel of death pops up and freezes what I am busy with in Safari. Apps take longer to open than usual.
    I have added EtreCheck results from this morning.
    Please give advice on:
    How to improve the speed.
    Whether there is there something in the results that I should be concerned about.
    Hardware that should be updated.
    Should I get an app to delete or prevent unnecessary files (from apps?) from being saved without my knowledge.
    Thanks
    EtreCheck version: 2.1.6 (109)
    Report generated 26 January 2015 at 9:16:11 AM SAST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Support] links for help with non-Apple products.
    Click the [Details] links for more information about that line.
    Click the [Adware] links for help removing adware.
    Hardware Information: ℹ️
      MacBook Pro Intel Core i7, 15" (Mid 2012)
      MacBook Pro - model: MacBookPro9,2
      1 2.5 GHz Intel Core i5 CPU: 2-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1600 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1600 MHz ok
      Bluetooth: Good - Handoff/Airdrop2 supported
      Wireless:  en1: 802.11 a/b/g/n
      Battery Health: Normal - Cycle count 153
    Video Information: ℹ️
      Intel HD Graphics 4000
      Color LCD 1280 x 800
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Time since boot: 0:51:27
    Disk Information: ℹ️
      TOSHIBA MK5065GSXF disk0 : (500,11 GB)
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD (disk1) / : 498.88 GB (394.47 GB free)
      Core Storage: disk0s2 499.25 GB Online
      HL-DT-ST DVDRW  GS31N 
    USB Information: ℹ️
      Apple Computer, Inc. IR Receiver
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. FaceTime HD Camera (Built-in)
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist [Support]
    User Launch Agents: ℹ️
      [loaded] com.google.keystone.agent.plist [Support]
    User Login Items: ℹ️
      iTunesHelper Application  (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Internet Plug-ins: ℹ️
      FlashPlayer-10.6: Version: 16.0.0.287 - SDK 10.6 [Support]
      Flash Player: Version: 16.0.0.287 - SDK 10.6 [Support]
      QuickTime Plugin: Version: 7.7.3
      Default Browser: Version: 600 - SDK 10.10
    3rd Party Preference Panes: ℹ️
      Flash Player  [Support]
    Time Machine: ℹ️
      Skip System Files: NO
      Mobile backups: ON
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 498.88 GB Disk used: 104.41 GB
      Destinations:
      2TB Seagate [Local]
      Total size: 2.00 TB
      Total number of backups: 8
      Oldest backup: 2014-10-16 21:41:16 +0000
      Last backup: 2014-11-07 10:29:39 +0000
      Size of backup disk: Excellent
      Backup size 2.00 TB > (Disk size 498.88 GB X 3)
    Top Processes by CPU: ℹ️
          5% WindowServer
          1% launchd
          0% fontd
          0% AppleSpell
          0% ps
    Top Processes by Memory: ℹ️
      219 MB com.apple.WebKit.WebContent
      176 MB Numbers
      163 MB Finder
      146 MB mds_stores
      82 MB WindowServer
    Virtual Memory Information: ℹ️
      204 MB Free RAM
      1.80 GB Active RAM
      1.62 GB Inactive RAM
      671 MB Wired RAM
      1.99 GB Page-ins
      532 KB Page-outs
    Diagnostics Information: ℹ️
      Jan 26, 2015, 08:25:19 AM Self test - passed

    Hi epwebb,
    The good news is that you have a good MBP. It seems to be hugged by that google crapware that you have on your Mac. They spy on you, use the bandwidth that you pay for and hugging your Mac obviously at your cost.
    Your Mac should be motoring. Look here and here to get the Mac to perform as it should
    Have fun
    Leo

Maybe you are looking for