Mac mini (2014) wont sync notes and ibooks with ipad air 2 and iphone, photos ok

MAc mini (2014) will not sync notes or ibooks with ipad air 2 and iphone 5s, photos are ok, any ideas please?

Syncing Notes on iPhone, iPad, and iPod touch - Apple Support
You have to use iCloud for the Notes. Books can be synced via iTunes.

Similar Messages

  • Yosemite 10.10.1, new mac mini (2014) logitech webcam c910, Facetime, picture is unstable (shakes and flashes)

    Yosemite 10.10.1, new mac mini (2014) logitech webcam c910, Facetime, picture is unstable (shakes and flashes)
    The problem I have is that when I start a Facetime video conference, the picture is unstable (shakes and flashes) after a couple of minutes.
    The webcam works well with Skype and Viber, the problem is just with Facetime.

    To all still having this FaceTime problem:
    To send (one-way) feedback to Apple for resolution: http://www.apple.com/feedback/macosx.html
    If you want to discuss possible solutions or workarounds with Apple personnel, contact Tech Support for Apple Apps
    Message was edited by: EZ Jim
    Mac OSX 10.10.2

  • HT1948 USB drive with install image is showing in Startup Manager on a Mac Pro, but wont boot. Showing circle with cross strip, and shut down automatically. USB device are made and work on two different MacBook Pro, but used on Mac Pro. Any help?

    USB drive with install image is showing in Startup Manager on a Mac Pro, but wont boot. Showing circle with cross strip, and shut down automatically. USB device are made and work on two different MacBook Pro, but used on Mac Pro. Any help?

    OS X installers have always been fairly specific, hardware-wise. I haven't read anything reflecting that situation with the Recovery HD, so it may be that the Recovery HD created for the MacBook Pro does not have the necessary drivers for the Mac Pro. Obviously, nothing definitive here, but a possibility.

  • HT4437 why wont mirroring out work anymore with ipad 2 and IOS 7

    After updating to IOS 7 my ipad 2 and Iphone 4S will not mirror out to my TV for viewing Netflix!!!  why

    After updating to IOS 7 my ipad 2 and Iphone 4S will not mirror out to my TV for viewing Netflix!!!  why

  • Facetime with iPad Air and iPhone 4s on at same time

    I have an iPhone 4S and iPad Air. When I get a Facetime call from someone else, both ring, and I can't answer on either one, even when I'm on a wi-fi network.
    Is there a way to make this work?

    Hi there Mland78,
    You may find the information in the article below helpful.
    Unable to make or receive FaceTime calls after April 16, 2014
    http://support.apple.com/kb/TS5419
    Symptoms
    If you started to have issues making or receiving FaceTime calls after April 16, 2014, your device or your friend's device may have encountered a bug resulting from a device certificate that expired on that date. Updating both devices to the latest software will resolve this issue.
    If you're using iOS 7.0.4 or later or iOS 6.1.6, this issue doesn't affect you.
    If you're using these versions of OS X or FaceTime for Mac, this issue doesn't affect you:
    OS X Mavericks v10.9.2 or later
    OS X Mountain Lion v10.8 with the latest security updates
    OS X Lion v10.7 with the latest security updates
    FaceTime for Mac version 1.0.5 or later for Mac OS X v10.6
    Resolution
    Update both devices (your device and your friend's device) to the latest version of iOS, OS X, or FaceTime for Mac. FaceTime calls will still fail if the iOS device or Mac that you're trying to connect to isn't up to date.
    iOS automatically presents the most recent compatible update for your device. If you're using an iOS 7 compatible device and you're still on an earlier version of iOS, you should update to iOS 7.1 or later. If you’re using a device that isn't iOS 7 compatible, you should update to iOS 6.1.6.
    If you’re using OS X Mavericks v10.9, update to OS X Mavericks v10.9.2 or later. If you’re using OS X Mountain Lion v10.8 or OS X Lion v10.7, install the latest security updates or update to OS X Mavericks v10.9. If you’re using Mac OS X v10.6, you should get the latest version of FaceTime for Mac in the Mac App Store.
    Learn what to do if you still can't make or receive FaceTime calls and you've made sure both devices are up to date.
    -Griff W. 

  • Wacom pens that work with iPad air and adobe photoshop touch?

    I just saw the newest Wacom pen the Fineline and it's pressure sensitive but the last time I used a wacom pen on a ipad air it detected the pen but pressure sensitivity so is their any other pen including Wacom that I can use on iPad Air with pressure sensitivity works including adobe apps mainly photoshop touch.
    Message was edited by: Devin Vanassche

    Hi,
    have you tried to install it over iTunes? This normally helps.
    Thanks,
    Ignacio

  • Adaptors to convert 2/3 products and use with ipad air

    so i have just got an iPad Air.  I have a keyboard for the ipad2/3 and an Altec speaker stand for ipad2/3  what kind of adaptor will work so that I can use them both.  I need to be able to watch tv/video on the speaker stand

    Hello burgesslm
    For accessories that use the 30-pin connection, you will need the Lightning to 30-pin Adapter to connect to them.
    Lightning to 30-pin Adapter
    http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter
    Regards,
    -Norm G.

  • Just upgraded to IOS 8 with iPad air and no more art work with my video's.  Very disappointing!  I hope they fix it!

    I regret upgrading to IOS 8 now because I cannot see the artwork for my video's.  That is the only reason I downloaded them through iTunes because I liked the way they displayed the art work of the video.  Now all I get is a gray box with the title in small letters below.  I hope they fix it. 

    Windows 8 w/ version 12.1.1.4 and iOS 8.1.3
    Close iTunes
    1)  Plug in Device
    2)  Go to Device Manager/Portable Device
    3)  Right click- update driver
    4)  Browse my computer
    5)  Let me pick from list
    6)  Click Have Disk
    7)  Type in, or look for C:\Program Files
    8)  Go to Common Files\Apple\Mobile Device\Support Drivers
    9)  Dbl-CLick  "usbaapl" file  - let it do it's thing, until status bar is finished
    Unplug Device- Open iTunes- plug in device- should work!
    I had to do this for both my phones- 5 and 6

  • Mac Mini Server on Yosemite showing x2 Servers with one being redundant

    Hi
    I have a Mac Mini OS X Server that worked fine with setup/name of 'server' on Mavericks, however since upgrading to Yosemite the server has now become Server (2) (or server-2) leaving a redundant 'server' (server) in the shared tab.I can't access 'server' on the Mac Mini server or via the Network (even with connect as) and cannot rename \server-2' to server. I have re-installed the OS with no change.
    Does anyone have any ideas what is going on here please and also how I could reset the 'serve-2r' to show correctly as 'server' and remove the erroneous one?
    Thanks
    Glennyboy

    The real answer to this depends on two things:
    1) whether you're just trying to do this within your lab, or you want external systems to be able to get to your services (e.g. students be able to access these resources from outside the school network)
    2) whether each device in your schools' network have real-world IP addresses, or whether the network uses NAT.
    If the answer to 1 is that this is only within the lab then there isn't likely to be any issue - get an IP address for your server from the network admins (which is why #2 is relevant) and you're set. The network guys would only have other involvement if you wanted to get external access working, in which case you've got to talk to them about opening holes in firewalls, etc.
    If this is purely internal (or, at least, doesn't need access from outside the school network) then there isn't likely to be any problem. You could even get away without DNS, although it would be nice if you could get a sensible hostname from the DNS administrators (e.g. server.yourlab.yourschool.edu) but even without that there shouldn't be anything preventing you from running a service and having internal clients connect to it (other than policy issues, of course…). For the most part the admins wouldn't even know you're running a server.
    Getting a static, non-conflicting IP address that valid for the school's network is going to be key, though.

  • IMovie, iPhoto not free anymore on iPad Air

    I purchased an iPad Air for myself a month ago. I installed the free iMovie, iPhoto etc. with my own ID. I gave that iPad Air to a family member and purchased another iPad Air and installed everything the same way as I had on the first. My family member restored the iPad I gave them and tried to get the iMovie, iPhoto with their own ID but it's not free anymore. What can I go to get these apps back on that iPad?

    The software was provided free of charge once for the iPad.  You used your account to collect on the one time free offer.  The offer is now spent.  Your family member can not take advantage of a free offer that has been consumed at this point.
    What you need to do is disconnect their account on the iPad.  Log in to the old iPad with your account, and then reinstall the apps you need to.  Then disconnect your account and have them log in again with their account..

  • Mac Mini 2014 Not reconising USB connections for ipads

    Hi, we have a Mac mini 2014 1.4GHz and currently having some issues with it. The Mac mini is used in an education setting. We are using the Mac mini for updating iPads in conjunction with a sync and charge trolly. When we are using the Apple Configurator to create profiles to push out to the iPads not all are being recognisetheir are 26 iPads in total and only a maximum of 18 is ever detected. ihave tried with my own personal laptop which is a MacBook Pro early 2011 and detects all 26 using the Apple Configurator. Does anyone know about USB limitations on the new Mac mini's? Also, we have had a replacement from the supplier and still the same.
    Any help would be hugely appreciated.

    Thanks Gary. Given your confirmation that it should be possible, I've taken the fact that the external drive doesn't appear as a choice in "startup disk" as an indication that my disk is the issue. I did try two alternatives method to get the .iso to disk given your hint,
    The first, using UNetbootin rather than my linux distribution and it does come back with a message rather specific after it finishes:  "The created USB device will not boot off a Mac.  Insert it into a PC, and select the USB boot option in the BIOS boot menu".
    The second, using Disk Utility but the restore section for the target volume doesn't seems interested in me dragging the .iso to the 'source' field.
    And that's with two different OS's .iso. so assuming that's not the right alternative either.
    Few questions from there if I may,
    Is there anything special I should take care off while doing the formatting to boot from a mac (mini)?  (I'd welcome any link to a validated method)
    what do you do when you have a non mac keyboard? (I had used "C")
    should the PXE method have worked as well on the mac mini?
    (Thanks again for that first response Gary)

  • Mac Mini 2014 with Apple bluetooth keyboard and Magic Mouse

    Hi all,
    I'm currently in the process of moving from my old MacBook to a Mac Mini 2014 and I have a couple of questions regarding functionality of the Apple bluetooth keyboard and Magic Mouse with the Mac Mini.
    As these are the only keyboard and mouse I have available to me as I currently only have the one computer in the house, I'm wondering how I will pair them with my new Mac Mini (arriving next week for Christmas) without a wired user input device (keyboard or mouse). When I paired them with my MacBook, I of course had its trackpad and keyboard to navigate through the various steps, but as the Mac Mini does not have these, how does the pairing process work? Will I have to get my hands on a wired mouse/keyboard? I'm asking in advance because I need to get my new system up and running to start work on 27th December and so I need to know if I should pick up a cheap wired mouse/keyboard in advance.
    My second question relates to the Mac Mini, Apple bluetooth keyboard and Boot Camp. Usually, when I want to boot into Windows on my MacBook, I hold down the Option/Alt key on my MacBook's built-in keyboard to be given the choice of operating systems. Sometimes when I do this using the bluetooth keyboard, it hasn't paired in time and it boots straight into OS X, so I have to wait until that has booted, shut down and then try again. Clearly, this might be a problem on a Mac Mini if I have urgent work I need to complete in Windows, so rebooting over and over until my keyboard finally pairs in time isn't desirable. Any tips here would be greatly appreciated!
    Thanks in advance for your help!

    If you unpair your BT KB and mouse from the old computer they should pair during the initial setup of the Mini. However, sometimes they donot a wired KB and mouse is required. You can use any USB PC KB and mouse.
    Once you get the BT KB to work you can use the Option key on the BT KB while booting to get your choice of OS to boot into.

  • My Mac Mini will charge - but not sync with - USB-connected devices (ipod, camera, memory card reader). How do I fix it?

    My Mac Mini will charge - but not sync with - USB-connected devices (ipod, camera, memory card reader). I have tried unplugging the devices, restarting the computer, selectively unplugging and plugging in the devices, closing and opening the relevant applications (iTunes, iPhoto, etc). I have tried using different USB cables.
    It's like all of a sudden the synching service stopped functioning or recognizing these devices for some reason. The other ports work just fine (monitor).
    The only USB-connected external device that appears to be unaffected is the USB SuperDrive and it works on all the USB ports into which I plug it.
    How do I fix this?

    Open Console in Applications>Utilities & see if there are any clues or repeating messages when this happens or doesn't happen.

  • Mac Mini 2014 and SATA HDD speed/negotiated speed settings question?

    I have a new Mac Mini 2014 2.6GHz i5 - with the Hitachi 1TB 5400RPM drive running OS 10.10.1.  It is working well and is a worthy replacement for our 2007 Mini.
    Today I was looking around the specs and settings and noticed the SATA settings for the HDD drive showed the link speed at 6 Gigabit but the negotiated speed is set to 3 Gigabit.  I have searched around and read about people having issues with other chipsets or hard drive firmware incompatibilities with other models of Mac.  Why would this be?  Is it due to the drive only supporting 3 Gigabit?  Searching for the drive model seems to indicate it supports 6 Gigabit.  Thank you in advance for all responses.

    I greatly appreciate the prompt responses and link information.  So, really other than a modern SSD, or high RPM drive, you will not reach the benefits of a 6Gb connection let alone possibly max out a 3Gb connection.  Which for a mild daily use Mini would be overkill.
    Thank you.

  • Mini DP to HDMI does not work with Mac Mini 2014?

    Hi All,
    I just upgraded from a Mac Mini 2011 i5 to a Mac Mini 2014. My old Mini worked fine running 2 displays with an HDMI cable to one monitor and a Mini Displayport to HDMI from the Thunderbolt port to another monitor. I can't seem to get the new 2014 Mini to see the monitor from either the Thunderbolt ports. Is this no longer supported?
    Thanks
    Ray

    Hi there LaureynR,
    You should still be able to do this. I would recommend taking a look at the article below for troubleshooting steps.
    Apple computers: Troubleshooting issues with video on internal or external displays
    -Griff 

Maybe you are looking for

  • Problems after installing OS X 10.5.4 Leopard

    I need a bit of advice. After a long delay I have finally upgraded my iMac G5 from OS X 10.3 Panther to OS X 10.5.4 Leopard. I chose to use the 'Archive and Install' option and everything seemed to go smoothly. After the installation was completed th

  • JAVA Mapping

    Hi, I have worked on Graphical mapping and XSLT Mapping. I want to do some scenarios using Java mapping. Can anyone give the detailed steps to work on Java Mapping. What are the softwares needed and their configurations. Also I want to know whether N

  • Creating custom formulas in Numbers V3

    I am trying to create a MAXIF formula, in order to determine the maximum value (max-values) in a range of values (test-values) that are associated with a certain category (condition).  The formula would be similar in concept to SUMIF or AVERAGEIF, ex

  • Can I get HSL grayscale converter in ACR 5.5 for PHE 8?

    Sorry, literally brand new with this and got PHE for x-mas when I was planning on getting CS4 for x-mas. Current Raw Converter doesn't give me the option so that I can filter different colors in black and white. Am I going to need CS4 for this or is

  • JAXWS Webservice from WSDL - Compilation errors in schemas

    Hello, I am creating a webservice (Java EE1.5 JAX-WS ) from wsdl . When I build the artifacts in JDeveloper, I get few compilation errors related to schemas. Error(5412,31): com.service.gsrl.FingEvntType.FINGEVNTENTR.ROLEPLYR is already defined in co