Mac mini and Logitech gaming headset

I have a 2008 Mac Mini running 10.6.4 and I want to use a Logitech headset for online gaming but I can not make the microphone work. The output works fine, but the input wont register at all. The mic uses two standard jacks, one for input and one for output and they are connected directly to the back of the mini but it get no recognition that a mic is attached at all.
Anyone know how to get the mini to recognize the mic?

The line should be the mic option assuming you have a line in and a line out connection on the back of the Mini and the sound out and mic in connectors are plugged in to the right connections.
I have a USB camera with built in mic ( Playstation Eye ) connected to one of the USB ports which I use for the mic and it shows up below line in in the settings so I don't use the line in unfortunately.
The line in is meant to be the mic input. I have a late 2009 Mini and it has a line in and a line out as in the picture in the link below. Is yours the same ?
http://support.apple.com/kb/HT3478
Having looked at the specs on that page again it seems as if the line in may not support mics after all. The other option would be to get a USB adapter with a female line in and line out and connect the headset to one of the USB ports as this should work. I've done just that on my MacBook Air which is running 10.6.3.
The Playstation Eye on my Mini is connected the same way. If you can't find an adapter for your existing headset then you might need to consider buying a new one that does have USB as an option.
...

Similar Messages

Mac Mini and Gaming under XP

Hi. I haven't installed XP yet because I only need it to play games on my Mac Mini. I was wondering if anyone has tried using some recent racing games on the Mini, for example, GTR2, Colin McCrae Rally 2005 and TOCA Race Driver 3. Has anyone experienced these on a Mini? Mine is 1.66ghz with 2gb ram. Thanks for any help.

I have this same Mac mini and you will find the gaming experience is similar to a similarly spec'd PC laptop that uses the GMA950 integrated GPU. The GPU is not particularly special when it coes to 3D processing although does hand 2D quite well.

Yosemite 10.10.1, new mac mini (2014) logitech webcam c910, Facetime, picture is unstable (shakes and flashes)

Yosemite 10.10.1, new mac mini (2014) logitech webcam c910, Facetime, picture is unstable (shakes and flashes)
The problem I have is that when I start a Facetime video conference, the picture is unstable (shakes and flashes) after a couple of minutes.
The webcam works well with Skype and Viber, the problem is just with Facetime.

To all still having this FaceTime problem:
To send (one-way) feedback to Apple for resolution: http://www.apple.com/feedback/macosx.html
If you want to discuss possible solutions or workarounds with Apple personnel, contact Tech Support for Apple Apps
Message was edited by: EZ Jim
Mac OSX 10.10.2

Can I turn off the monitor for Mac Mini and use it as a music server?

I am in the process of upgrading my PC most likely to a Mac product. With the non-server version of Mac OS X, can I turn off the monitor connected to a Mac Mini and use it as a streaming server? Or I have to get the server version of OS X to do that?

I plan to run Logitech Media Server on the Mac to stream music to players. Each player interacts with the Logitech Media Server to select songs to stream. When I turn on a player, it will wake up the computer from the sleep mode.
Currently, this Logitech Media Server runs on a Windows Vista machine and it will keep the PC from entering sleep mode while playing the songs. After I play the last song, the PC will start the idle count down and then enter into sleep mode.
Do you see any problem with my intended use of a Mac Mini?

Bridging the gap between Mac Mini and iMac

Does anyone agree that Apple needs to add another model between the Mac Mini and the iMac? I think they need something like a Mac Mini Plus. Two models, one with the 1.83GHz Core Duo and one with the 2.0GHz Core Duo. The unit itself would be slightly larger than the standard Mini and include a PCI Express slot with several video card options and a faster (7200RPM) hard drive. Personally, I hesitate to buy an iMac because of the built in monitor. I would prefer to buy a separate LCD flat panel monitor that I could keep for years and use with different Mac models as I upgrade. As for the current Mac Mini, it's video and processor options are on the low end, albeit perfect for the casual user, but for someone that wants to do some gaming or video editing, they don't quite cut it.
Don't get me wrong here, I love the elegant design of the iMac, but I think Apple needs to offer something that allows us to have the iMac equivalent computing power without the built in monitor and without having spend a thousand more on a PowerMac.
Athlon XP 1800+ Windows XP Pro

Yes, I'd love something in the form of a Mac Mini that was closer in spec to the iMac.
Honestly, the only reason I won't buy an iMac CoreDuo is the built-in monitor.
And, the only reason I won't buy a new Mac Mini is that they are underpowered.
I have owned two iMac G5 systems, and both had serious faults with their built-in LCD panel.
The first would permanently etch in anything on the screen for every hour of intensive use.
It wouldn't etch it in in normal use. But, if I did any of my audio work, it would heat up the system so hot that the image on the screen would literally cook into the LCD panels plastic surface.
It literally looked like you took a razor blade, and precisely carved the exact image into the surface of the screen. Pretty nasty looking. Nothing would get rid of it, and it would happen every time I did my audio editing / processing work for an hour.
Naturally, the more work I did, the worse it got. I only got two editing sessions out of an LCD panel before having it replaced.
After going through that for a while, I sold the system after having a fresh panel installed under warranty.
I got tired of damaging the screen after every hour of work.
The second iMac G5 was purchased a year later. That one also suffered permanent damage to it's LCD panel. But, not quite as noticeable.
I know that there are a bunch of people getting ready to hit me with the "Image Persistence" explanation. But, trust me, I know about Image Persistence, and this wasn't it.
I was seeing actual permanent screen burn-in (which is not supposed to happen on LCD panels).
The service tech was absolutely amazed at the appearance of my screen. And, yes we verified it was the actual panel that was damaged. He wouldn't replace it without verifying that it was the panel itself.
Anyway, I called to arrange service on the second system again, and before I could get it in there, the backlight started flickering. And, I had already had tons of other stuff fixed on the machine. So, I sold it and bailed-out.
Now, after all the problems I've had with the built-in screens on the iMac G5 systems, I don't want another Apple product with a built-in screen. I want to use my own LCD panel.
I have an LCD panel that I'm using now. It's about 3 years old, and only cost me $200. And, it doesn't have even the slightest indication of image burn-in or image persistence. I use it every day, and use it just like I did the iMacs.
So, what I want now, is a machine comparable to the iMac CoreDuo, but without the built-in screen.
The current Mac Mini's cost way too much for their very low specifications.
I already have a Mac Mini G4. It's underpowered as well. But, no worse-off than the current Mac Minis.
Now, if Apple produced a Mac Mini with identical specs to the iMac, I'd gladly buy it.
Even better for them, I'd pay the same price as the current iMac to get it without the built-in monitor.
Yes, that's right, I'd pay the full price of the iMac to get a Mac Mini without a monitor if it was of the same specifications otherwise.
The current Mac Mini is obviously stripped-down to prevent competition with the iMac. But, I think they'd find that they would simply expand their user base if they offered a better Mini.
With their product line as it is, the current Mac Mini is not a compelling machine, and the iMac is not an option because of it's built-in monitor.
Get me a high-end Mac Mini and you've got a sale.

Mac Mini and WoW???

Hi all,
Will a Mac mini run World of Warcraft smoothly?

My son has been running World of Warcraft on his 1.83 Intel Mac Mini and it runs good for the most part. The Wrath of the Lich King expansion seems to tax it a lot more in major cities but we have been in raids together and it is acceptable enough with the settings lowered. The mini is a great machine but I would not recommend it for gaming.

Mac min and i movie

When i launch i movie it says my mac mini does not contain an quartz extreme compatible graphics card & quartz extreme is not working in i movie. Any suggestions of the source of the problem and how to fix would be appeciated..thanks..

Its nice that this problem was solved, but it would be even nicer if we knew what solved it.
I am looking at either a Mac Mini (2g/2g) or the iMac 2.4g/24", and have been perusing the Mini forums for info on how well the Mini runs iMovie, or even FCE. I have used FCP 3.0 for years on my G4 / 900 m, but don't need the power of FCP (or the hefty upgrade price).
I took a look at iMovie 06 an iDVD 06, and find they will pretty much suit my current needs. I am mostly just moving (and editing) old VHS home video to DVD. However, iMovie bogged down quite a bit on my tired old G4 after some extensive editing that required lots of sound track work. While this isn't normal in the simple VHS-DV conversion process, I figure I might as well get a newer, faster, system to allow for it.
Many comments on the Mini address "great for everything but 3D graphics gaming" This is perfectly fine, but I noted a warning about "quartz extreme" regarding FCE, so am interested in the same problem with iMovie.
The real question I am asking, tho, is whether iMovie or FCE editing is as the upper edge of chanllenge for the Mac Mini, and I should go for the iMac, or is the editing just a middle-of-the-road challenge for the Mac Mini.
I am intrigued with saving hte $1000 on the iMac by reusing my Monitor, Keyboard and Mouse, bu tnot at the risk of finding that the Mac Mini only "almost" does the job.
Thanks

Mini and Logitech V270 Bluetooth mouse

I just got my mac mini core solo and am having difficulty with my bluetooth mouse. I also have a MacBookPro that I was using with the V270 Logitech bluetooth mouse. With the MBP, it works flawlessly. It tracks well and has a pretty good range (20+ feet).
When I connect the V270 to the mac mini (after disconnecting MacBookPro/V270 Bluetooth), I get very limited connection. At about one foot away the mouse tracks poorly and 10 feet away it completely disconnects.
I brought it into the local Apple store for a Genius to look at it and had similar problems. It did poorly on a mini and it did much better on the macbookpro. Although not as good as it has been working at home. The genius did think that the problem was the V270 but he was unable to recommend a good multibutton mouse to work with the mini.
Has this problem happened to anyone else? Were you able to isolate the problem to the mouse or to the mini. If it's the mouse, can anyone recommend a good two button mouse with scroll wheel
Thanks,
Mike
Mac mini solo

I exchanged my original V270 and got a brand new one to test out. When I brought it home, it reacted the exact same way. Works well on the macbookpro and works erratically on the intel mini.
I called up apple support again and they told me that the V270 may not be compatible with the mac mini and I should contact Logitech to verify its compatibility. I sent off an email to Logitech and am waiting for a reply.
One thing I noticed was that the mouse worked much better when it was used behind the mini. Its still bad, but better.
I'll keep you posted.

Mac Mini and DVI to ADC adapter

I have an old Apple Cinema Display with an ADC port. I have the DVI to ADC adapter, which I have been using to connect to an old Power Mac which is on its last legs. I want to replace the Power Mac with a mac mini and connect it to the display from the HDMI-DVI cable (included) to the DVI-ADC adapter, and then connect on to the Display. The Apple sales representative (after laughing for a while, which I thought was fairly insensitive) said that I won't have audio with this setup, and I will have to get a whole new display. Is this true?

when you say "Mac flat screen LCD", do you mean this:
http://www.ares-woo.com/christmas2005/images/pc_cine.jpg
if it is, you might wanna try this:
http://store.apple.com/us/product/MB570Z/A?mco=MTY3ODQ5OTY

Mac Mini and thunderbolt/vga to LCD TV

Hi All,
Here is an interesting one......
I have just taken delivery of 5 new Mac Minis which have the thunderbolt port on them. The Mac Minis each connect using displayport tb/vga adapter to a switch then on to 5 LCD TVs.
The HDMI/DVI is not used.
In this config, if I start a Mac Mini the display will not route through the Thunderbolt/vga adapter to any of the TVs (even though I have selected them on the switch). The display seems to want to go through the default HDMI port.
If I connect a standard PC monitor to the tb/vga adapter and reboot, the screen shows correctly on the monitor. If I then change cables without a reboot, the LCD TVs show correctly!
I can add the PC monitor as a second monitor using HDMI/DVI and ensure that the outputs are mirrored AND that the VGA display is the primary. However, on reboot it's as if the details are all forgotten!
Searching around it seems that there are issues with Mac Minis and VGA connections to LCD TVs. That said, I wanted to put my environment out there and see if anyone had an ideas.
Interestingly enough, with older Mac Minis (without the tb/vga) it works perfectly well, indicating a problem with the new Mac Minis.
Thanks for ANY ideas!!!!

Hey Spost!
You have explained exactly what happened to me last night. I was afraid it was part of the 10.8.3 update or the latest ATV software update that hit this week. I tried from my macbook pro and the airplay from 10.8.3 and the atv software worked fine.
Previously my mac mini was connected to a monitor in my basement but last night i made it "headless" and moved it to my "server closet" airplaying prior to the move worked great ... then last night 4:3 Green Screen.
My guess is the computer needs to be connected to a external display in order for airplay resolution to figure itself out. Via Logmein i could see that the Mirror mode wanted to use the resolution that fit the mac and not what was best for the Apple TV ... Even forcing the change made the setting go right back to this mac.
Looks to be a bug in a plist file that apple would need to fix as many people run headless mac mini's and now wish to AirPlay to their Apple TV's without the need for a external cable run.

I have a Mac Mini and I can't get it to work with my Ricoh Aficio MP 161. Any ideas?

I have a Mac Mini and I can't get it to work with my Ricoh Aficio MP 161. Any ideas?

The latest Apple driver support begins with the MP 171.
Here is Ricoh's official driver download page specifically for the Afico MP 161. Note that new drivers for this device were released on Aug 2, and include Lion and Mountain Lion.
Hopefully, this will solve your device issues.

I have a new Mac Mini and I found AdWare called TakeOverSearchAssetsMac and SearchProjects on it. I have been unable to remove it. Does anyone have any ideas on how to remedy this?

I have a new Mac Mini and I found AdWare called TakeOverSearchAssetsMac and SearchProjects on it. I have been unable to remove it. Does anyone have any ideas on how to remedy this?

Please review the options below to determine which method is best to remove the Adware installed on your computer.
The Easy, safe, effective method:
http://www.adwaremedic.com/index.php
If you are comfortable doing manual file removals use the somewhat more difficult method:
http://support.apple.com/en-us/HT203987
Also read the articles below to be more prepared for the next time there is an issue on your computer.
https://discussions.apple.com/docs/DOC-7471
https://discussions.apple.com/docs/DOC-8071

I have a new MAC MINI and I want to install a second monitor. I have one connected to the HDMI and it works. I can't get a signal to the other one. It is connected from the thunderbolt to its HDMI port. How can I make it work?

I have a new MAC MINI and I want to install a second monitor. I have one connected to the HDMI and it works. I can't get a signal to the other one. It is connected from the thunderbolt to its HDMI port. How can I make it work?

Could be a bad cable or bad Thunderbolt port.
You have 90 days of free telephone support on a new device. You can call them at 1-800-MY-APPLE. Have your Mini's serial number handy
You can also make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

I have a new Mac Mini and a 7 year old Mac monitor. The connectors don't match. What to do?

I have a new Mac Mini and a 7 year old Mac monitor. The connectors dont match. What to do?

I suspect the monitor has an ADC connector
http://en.wikipedia.org/wiki/Apple_Display_Connector
If so you need one of these:
http://www.amazon.com/Apple-DVI-ADC-Display-Adapter/dp/B00011KHT2/ref=cm_cr_pr_p roduct_top
Otherwise what connector is on the monitor?

Just got a new mac mini and I can't figure out how to authorize it. Help!

Just got a new mac mini and cannot figure out how to authorize it. Help!
m

Link your phone number and Apple ID for use with FaceTime and iMessage

Mac mini and Logitech gaming headset

Similar Messages

Maybe you are looking for