Mac mini firewire

Waiting for my new mac mini to arrive and am trying to get all my cables ready. I have an EHD with firewire 400, will my current cable work with the mini. I have an emac with 400 firewire. My Dell monitor has DVI and HDMI, how should I connect it to the mini. I was planning on using the mini HDMI and run a cable to my Samsung LCD TV when I want to go big monitor style. Any suggestions?

I would actually go for one of these instead:
http://www.amazon.com/gp/product/B002JH3TW8/ref=s9simh_gw_p23_i2?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=center-2&pf_rd_r=0C42MGP0HDBEX8R94Q J7&pf_rd_t=101&pf_rd_p=470938631&pf_rdi=507846
now the reason I say this is because the adapter listed above will be using the port as the fulcrum by which the weight of the adapter and the cable will be applied to. Look at your hdmi to dvi cable on your mini. Notice it is not a straight through connector like the one listed above? That is so the weight of the monitor cable is not applied directly to the port. The Mini Display port adapter is the same way. As was the DVI to VGA adapters that apple used to ship with the G5 mac pro's. Apple is pretty smart about the design of these things, so take a cue from them and get one like I listed above. Because once that fw800 port gets busted from the weight, there is no fixing it unless you solder anew one on or replace the logic board.

Similar Messages

Mac mini firewire vs Mac pro firewire, trouble with medium format digital back

Hi
I'm trying to use a Mac Mini to run a medium format digital back, I have problems with the connection between the digital back and Mac mini dropping out randomly meaning I have to unplug the firewire and restart the back, sometimes restart the software.
Manufacturer says it is due to Mac mini firewire not supplying enough stable power to the back and to use a powered firewire repeater.
I've tried that it hasn't really made much of a difference.
Manufactuer now says the Mac Mini's are just not up to the job they are significantly diferent to the Mac pro range.
Is this correct?
So I can't use a small form factor mac mini to do a single task - tether to a camera and run camera software. Doesn't really seem that big an ask?
thanks in advance.
Nigel.

you may think it's a single task, but that's on top of the underlying OS processes. also, i'm assuming that your mini is only running a single hard drive, which means your software is competing against the OS for access to the write heads on your drive. have you confirmed that your system memory isn't generating too many page outs? if you're in activity monitor and you see that count increasing, you need more RAM.
you could also try to install a second hard drive in your mini, and designate that drive as your write target for the camera software.
is this for video, or stills?

Mac Mini firewire peripheral not recognized?

I recently purchased a used Mac Mini and am trying to connect an MBox 2 Pro Firewire audio interface. The M Box 2 Pro is powered and lights up but doesn't show up in the Mac Mini's audio In/Out. I'm using a 9 pin to 6 pin cable. I've been through a number of forums and have tried rebooting and reconnecting in different order, as well as reinstalling Pro Tools 8. USB audio interfaces do appear in the menu but not the firewire...Any help would be greatly appreciated!

check out this article.
additional info here and here.

Migrating from mac pro to mac mini firewire 400 - 800 cant find computer

hi there
am trying to use migration assistant to move from old mac pro to new mac mini using firewire 400 - 800 cable but one computer cant see the other - any ideas anyone? have lots of large files so don't want to use wifi
cheers
Maria

Did t d this?
Make sure both computers are connected via FireWire or ThunderBolt before starting. If you connect the cables after Migration Assistant is already running, the source computer may not be properly detected.
Restart the source (original) Mac while pressing and holding the "T" key.
You can use ethernet too:
Make sure that the source Mac and target Macs are connected to the same network, either wirelessly or via Ethernet. (You can directly connect the two Macs via an Ethernet cable if both are Ethernet capable. To make MacBook Air Ethernet capable, connect using the Apple USB Ethernet Adapter.)
from:
http://support.apple.com/kb/HT4889

Mac mini firewire chip

Which Firewire chipset is used in the original mac mini? (1.25 GHz)

Ah, I see...
Mac Mini (PPC, old):
'FireWire (OHCI) Apple ID 31 built-in now active, GUID 001451fffe0a2400; max speed s400.'
This is actually an Apple 'Intrepid' and uses a Lucent PHY, according to the Apple PHYTool 2.9
My old (Lucent chipset) PPC Mini exhibits big problems working with my FireWire audio interface (TI chipset, TC Electronic Konnekt 24D), whilst my old (TI chipset) MacBook Pro works fine.
https://discussions.apple.com/thread/1882940?start=0&tstart=0

Mac Mini - Firewire Issue?

Dear All,
I have a 'late 2009' Mac Mini (2.53 GHz, 4GB RAM) and I think I may have an issue with the Firewire from the computer.
I have an iSight web cam plugged in to the Mac Mini's Firewire socket via a simple 400 to 800 adapter. Everything works as it should, but I've noticed that the iSight is receiving power all the time, whether the Mac Mini is on or off. Is this normal behaviour?
Can anyone confirm whether or not this model of Mac Mini is supposed to output power to Firewire devices all the time, whether on or off?
I want to know whether this is a feature or a fault before I report the issue to Apple. Also, will any harm come to my iSight by being powered up all the time?
It may be unrelated, but I've noticed that I get fan noise from the Mini all the time now. When the computer was new, it was silent under normal use. Could this indicate a more general problem with my mini?
Thanks for your help in anticipation.
Best Wishes,
Richard

Richard Mccarthy wrote:
Dear All,
Again, thanks for much for your replies; it is really appreciated.
You're welcome, Richard, and thanks for the feedback!
Thanks also for confirming that there's nothing wrong with my Mac - I was beginning to get worried!
If you ever have serious electrical concerns, I strongly recommend that you unplug your Mac until you can have it examined by an Apple Authorized Service Provider.
I'll give the vacuuming along the bottom of the computer a go; is there any risk from static or harming the Mac min that I should be aware of?...
There are instructions for how to clean each Mac in the users guide manual that came with every Mac I have ever owned. Check yours to be sure you are within the mini's instructions. If you still have problems or concerns about cleaning your mini, ask your AASP.
I have never owned a mini, but I regularly clean and vacuum my Macs. Here are my guidelines:
• keep the covers are properly in place,
• keep the Mac connected to a properly grounded electric outlet,
• do not insert the vacuum nozzle or dust brush into the Mac's vents or other openings.
These rules have kept my desktop Macs safe and working.
DaddyPaycheck has offered mini-specific suggestions.
If fan noise bothers you, also check placement: http://support.apple.com/kb/TA22804
Message was edited by: EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.4); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.4)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod touch 4.1

"mid 2010" mac mini firewire port question

Hi all:
I have a mac mini "mid 2010" version with internal optical drive and small firewire port in between the hdmi and ethernet port...
I want to connect a firewire device via this port, but my device & existing cable are of the older style size. I see different "pin numbers" being thrown around now in terms of port size & cable types etc. so that it looks like the 'old style' port on my device is a "6 pin."
What is it that I have on my mini? I would need a ?__ pin to 6 pin cable....
tm

I've used this firewire adapter with my mini.

WARNING! Firewire 400/800 usage precaution of all Mac mini

I just found one vital notice about using FireWire 400/800 (IEEE 1394a/b) in any Mac mini. Please be careful and read this notice before you buy any External FireWire 400/800 Hard drive enclosure/paddock.
I believe in FireWire. FireWire is faster and more stable than USB 2.0/3.0. I love FireWire, but industry these days are terrible poor making its peripheral devices, related chips, etc.
Beware there are many FireWire devices such as 3.5 inches Hard drive Dock and enclosure they claimed to be used with FireWire 400 or even FireWire 800 with options like USB, eSATA. THESE ARE POOR PCB design and POOR chips inside and even POOR Power Supply, DO NOT BUY or USE THESE so-called FireWire HDD Dock or enclosure, it will hurt your Hard-drive definitely, it will make a lot of BAD-Axle (or bad sector) on your HDD. It's nothing wrong with Mac Mini FireWire Chips, it caused by Third-Parties' poor design and tactless attitude, there are lots of brands out there with the same POOR design and inconsiderate issues there.
The best way to protect your HDD is put them in a dock-able slot with Active 500W above Powered PC, link with FireWire, no Bad-Sector will occur.
These are real test and real experience from I myself.
I have tested lots of brands of 3.5 inches HDDs and docks and enclosures, I just save lots of time for you, if you love your data and your HDD, DO NOT USE THESE DOCK or Enclosure.

The big problem with those Docks or enclosures has a common poor cause, it's the Power Supply, if your 3.5 inches HDD is plugged in a Good 500W powered PC (Such as the brand Enermax Power Supply), the bad-sector will never happen. But it will happen when you use those Docks or Enclosures even with External Power supply. Because those external power current and voltage are not power enough, they didn't test it fully before putting them in market. They thought it was OK if they can boot up the disk, but they are dead wrong. You can boot a HDD doesn't mean the current and the voltage is power enough, it should have supplied with full power to those Standard 3.5 inches HDD, Seagate, Hitachi, Toshiba, they have rules about how many voltage and current a HDD should be supplied in operating, but those lousy industries didn't consider these rules, they thought just making their products as long as they can boot it up(power up), but the current and voltage is near the minimum level, a normal current and voltage is needed without margin, it should be at least full 5V or 12V, actually, 5V with 0.5A~1A current and 12V with fully 2A current to safely using a single HDD. But they didn't apply those rules.
You get the picture. When the current and voltage is not power enough, the HDD will sound alarm and make a big noise, then the surface gets hurt badly and it WILL NEVER be RECOVERED by any means of software or hardware.
When a HDD has a bad sector, it is a very bad for the future usage, because one bad sector could possibly cause another new bad sector and there is NO WAY to prevent this fate and its course, it is the way HDD works, a bad sector is a sign of short-life warning.
A fully 5.5V with 1A and 12V with 2A current is the most important thing when you decide to use your HDD in an external way by plug the lousy external power supply. NOT to mention those without external power supply, most of them are 2.5 inches USB-powered external HDD.
Who's to blame? blame to those lousy third-party industries who care nothing but their short term profit strategy. They just don't care about you. As long as a HDD could boot in the first place, they though it will work well. Lame and irresponsible.
DO NOT take chances to use a lousy External Dock or enclosure. You will regret anyway.
Put your 3.5 inches HDD into standard PC slot and cable with GOOD powered supply, at least 500 Watt above and the Power Supply must be Active model (expensive but worth).

In search of ...powered firewire hub for mac mini.

Greetings mac users ,
luv my mac mini!! Fits my small desk space well. I'm looking for a powered firewire/usb hub with @ 1Tb. memory. I plan to use this for downloading audio and video.(SONY A/V GEAR) I really like the look and space saving quality of the 'stacking' units. I tried the belkin non-powered hub but that did not work for my application.
I would like to have fire 800 9-pin input and output with ports on front or front left . BTW , Is there an overheating concern with the stacking units?
I welcome your recommendations. THANX ,..........the seeka

DaddyPaycheck wrote:
Good point. Somebody somewhere is stacking these and probably has the answer.
I don't think I have the definitive answer, but I currently have 2 MiniStacks under each of 5 separate Mini Server installations. I usually have them installed on a shelf with at least 4" of open space in 5/6 directions from the stack as a whole.
The Mini Server goes on top, with the two MiniStacks right beneath. Works well so far, but they've only been running as long as the Mini Server has been around.
G. Discenza
Message was edited by: carana
Changed some wording to make things a bit less confusing

How to connect an external HD to a 2007 Mac Mini with FireWire

I have a 2007 Mac Mini with a 1.83 GHz Intel Core Duo processor, 1 GB of RAM, and an 80 GB HD. I recently migrated to Snow Leopard (OS X 10.6.5) from Tiger (OS X 10.4.11). I purchased a 500 GB external HD from Seagate which I want to use to back up both my wife's notebook PC and my Apple. My Mac Mini has a Firewire 400 (6-pin) female connector on the back. The external HD can connect to a Mac via a Firewire 800 male 9-pin connector. How do I connect the male FW 800 9-pin to the female FW 400 6-pin port? This may sound obvious, but the solution is more challenging than I imagined. The 9- to 6-pin adaptors I've seen online combine a female 6-pin end with a male 9-pin end. I need the reverse of that (female 9-pin FW 800 to male 6-pin FW 400 adaptor)! I bought a 9- to 6-pin cable this week, but ended up with two male 9-pin plug ends, and no way to connect them. Is a solution available using FW, or should I bail and go with a USB 2.0 connection instead?

Most external firewire drives have removable cables that plug into "female" ports on the hard drive. Is the firewire cabling on your external drive different from this? (What is the model number of the external drive?)
If the cable is removeable, simply buy a 6-pin-to-9-pin firewire cable (male on both ends).
monoprice.com is a good place to find these cheaply and in the length you need.

Firewire port not working Mac Mini (G4 1.25ghz)

Hi,
The firewire port isn't working on my mac mini, I've tried several devices, but none are connecting. I was wondering if anyone else was having this issue and possibly a solution. The only software installed on the computer since the firewire worked last was Apple updates, so maybe other mini's lost firewire somewhere along the way.
Thanks, and Thanks
W

This worked from Smokerz in the Power Mac G4 forum:
1. Shut-down your Mac, and unplug the power cord
2. Turn the power off on your external FireWire devices
3. Unplug the FireWire devices from the Mac
4. Wait for 5 min.
5. Plug the power cord to your Mac only
6. For PPC Macs: Restart the Mac while holding the Option-Apple-O-F, and keep holding until you get the ">" prompt, then release the keys
7. At the ">" prompt type:
reset-nvram and hit the Return key
set-defaults and hit the Return key
reset-all and hit the Return key
the last command will restart your mac
8. Shut down your Mac
9. Connect all your FireWire devices to the Mac and turn them on
10. Restart your Mac.
Works fine now thanks Smokerz!!!!!
also repaired permission and reset PRAM, nothing worked until I did this.
W

I currently have a MAC Mini, which has 1 Firewire 800 port. I have a 1TB external hard disk that runs at Firewire 400. Can I insert another external hard drive that runs at Firewire 800?

Here's the deal. Currently running SL 10.6.8 on a MAC Mini. Planning for eventual upgrade to ML. Have a 1TB external hard drive partitioned into two volumes, one volume for Time Machine and one volume for SL which I periodically update using Superduper. Thus I always have a point-in-time bootable backup on the external hard drive.
The MAC Mini supports Firewire 800. However, booting from my current external hard disk is pretty slow, since it only supports Firewire 400. I am considering buying an Iomega MiniMax which supports Firewire 800. Then, I would use the MiniMax as my bootable backup volume, and relegate the older hard drive to Time Machine.
So, question #1 is, can I daisychain the new MiniMax between the MAC Mini and my existing external hard drive? My expectation is that the new Mini Max would run using Firewire 800 and that the existing hard drive would run at Firewire 400 speed as it does today. If it doesn't (e.g., daisychaining in the Firewire 400 external disk with the MiniMax Firewire 800 external disk ends up running the whole leg at 400), my resolution will be to run the existing hard disk off an available USB port and have just the MiniMax running at Firewire 800.
Why am I going to all this trouble? That's question #2. I don't trust upgrades; they always break something. When I upgraded from 10.5.x to 10.6.x, the web directories got renamed, and all of my web apps 403'd until I figured out what happened. Plus, I have accounts for other family members, and in order to ensure their ability to use the computer during my upgrade process, I need to have the ability to fall-back quickly to a known-stable version of OSX. So what I'm trying to do is insulate myself from problems by partitioning the MiniMax into two volumes, taking a Superduper image of my current installation on the Mac Mini to MiniMax external drive volume 1, then upgrading to ML on the MAC Mini, and take a SuperDuper image of that to MiniMax external drive volume 2. Then, if the upgrade results in problems I can't resolve immediately, I can simply reimage the MAC Mini from MiniMax volume 1. BUT ...
... I've read that the ML installation creates a "service and support" partition that is different than the startup disk. I'm concerned that I won't be able to reimage the hard disk in the MAC Mini once I upgrade it to ML because of the partitioning changes it introduces on the startup disk. Theoretically, I +should+ be able to use the disk utility on my SL system to repartition the disk in the MAC Mini prior to reimaging it from my backup, but I'm considering the possibility that the new partition may be of a type that the SL disk utility cannot identify, and might therefore be unable to delete or even detect. So I'm hoping someone else has been down this road and can advise me. Even at Firewire 800 speeds, booting from an external disk is still going to be slow, so I want to be able to restore my SL image to the MAC Mini hard disk.
A little background on me. I work for a major disaster recovery provider. I used to have a Mac PRO G5, which I got used, and the first thing I did with it was install a second hard disk, SuperDupe an image from the first disk to the second, and made sure I could boot from the second. THEN I started using and customizing the MAC. I really feel vulnerable with the MAC Mini, since it only has the single internal hard drive - sort of like going out in public dressed only in a long T-shirt. So my whole thing is, I ABSOLUTELY MUST BE ABLE TO PUT THINGS BACK THE WAY THEY WERE before I do the migration to ML.
Obsessive-cumpulsive? Yep. Anal? You got it. That's why I'm in the DR business.

You may have overloaded the port, following the instructions below it should reset:
+1. Shut down the computer.+
+2. Disconnect all devices and all other cables, except the keyboard and mouse cable(s).+
+3. Disconnect the computer from the power outlet and wait for 3 to 5 minutes.+
+4. Plug the computer back in and turn it on.+
+5. Reconnect the device(s) (one at a time if there is more than one) and test. Test with each port if you have more than one.+
http://support.apple.com/kb/HT1317?viewlocale=en_US

2005 mac mini on OSX leopard will not boot up from firewire disk

I have an old mac mini that my son still uses and the super dirve does not work any more. But now the main hard disk needs to some attention from Disk Utility. So I need to boot up from the Leopard install DVD. But of course the DVD dirve does not work so how to do this? I have tried to create a bootable disk by restoring the install DVD to a partition on a firewire drive and this is seen as a bootable drive by my 2008 iMac, but not by the Mac Mini. So is it possible to boot up rom a irewire drive? USB doesn't work either

Which Tiger Install DVD do you have...?
1. I think that, that model originally came with 10.4.10 and so you will need either the original 10.4.10 install disc or a later retail (Leopard or Snow Leopard) upgrade DVD.
2. In addition, a new (HDD, Hybrid Drive or SSD) must first be Partitioned GUID Partition Table and Formatted Mac OS Extended (Journaled) before OS X can be installed.

How many firewire drives can I daisy chain on the mac mini

How many firewire g-drives can I daisy chain on my mac mini

edalexjr wrote:
How many firewire g-drives can I daisy chain on my mac mini
From personal experience, if they are bus powered portable drives,
the answer is none. For what ever reason, they are draw a lot of
power and are probably near the edge of the bus powering specs.
Then again, these were the fastest of all the portable FW drives that
I have (Iomega and Seagate being the others), which may have
something to do with it.
I had also noticed an issue with them even with USB. Plugging one
into the Mini or even a powered USB hub would be fine, but 2 would cause
both to be inaccessible, unless I used a couple of USB "Y" cables
that would distribute the power across other ports.
If they are externally powered, you could string a bunch.

Mac Mini boot failure - hangs at FireWire ?

Mac Mini mid 2010 model
Running Mountain Lion
After 10 weeks of no usage booted OK into ML. Updated Airport Utilites. Crashed.
Hangs on boot at log + gearwheel.
Will not boot via recovery
Will not boot in Target Mode
Verbose boot appears to hang on FireWire load, i.e. Last line repeated at 3 min intervals
FireWire (OHCI) Lucent ID 5901 built-in: no valid selfIDs for more than 3 minutes after bus reset.
Hardware Fault ?
If software how to acess Hard drive to repair ?

Executed single user boot and confirmed drive is OK.
As unit is second hand do not have original instal DVD. Tried booting using MacBook Pro Snow Leopard DVD which ran through to language selection then rejected hardware (as it should). Tried iMac Leopard DVD but not luck.
Connected Ethernet to router (& Internet) and tried recovery boot via apple servers but same result. EFI probably not patched. A further verbose boot would show Ethernet port connected and then not (when cable removed). Still hanging at FireWire port as original post.
Booted in Safe Mode with verbose and saw FireWire active on earlier line in log but still hangs after following with no further text ;
MSMOS arrived
airport:link down on en1. Reason 8 (disassociated due to station leaving)
En1::IO80211 Interface::postMessage bssid changed
000000000 000000020 NVEEthernet::setLinkStatus - not active
Stumped. Will contact local apple repair outfit and see if they have correct instal DVD.
Question - Can an image of the instal DVD be download ?

Mac mini firewire

Similar Messages

Maybe you are looking for