Mac Mini Hangs.  Can't figure out why.

Okay, so, the Mini, which is about 6 months old is hanging. It has been for a while now. It runs fine, but then at some point (I'm never using it when it does this) the **** thing hangs. MOST of the time it will be in a screen saver (I thought a 3rd party screen saver was causing this, so I switched to the Apple RSS feed one that came with OS X.)
The real problem is that I cannot find a single crash log that states what's going on. So, it's like the Mac isn't even writing a crashlog when this happens. The modified dates on EVERY CRASH REPORT is months ago. So the issues that keep happening are not being recorded.
Unless this has somethign to do with it, which came from the console.log
Mac OS X Version 10.4.4 (Build 8G32)
2006-01-14 21:38:06 -0700
Waiting for prefs changes...
2006-01-14 21:38:39.028 SystemUIServer[89] lang is:en
LOG: database system was interrupted at 2006-01-14 09:57:49 MST
FATAL: The database system is starting up
LOG: checkpoint record is at 0/810480
LOG: redo record is at 0/810480; undo record is at 0/0; shutdown FALSE
LOG: next transaction id: 508; next oid: 25511
LOG: database system was not properly shut down; automatic recovery in progress
LOG: ReadRecord: record with zero length at 0/8104C0
LOG: redo is not required
FATAL: The database system is starting up
FATAL: The database system is starting up
FATAL: The database system is starting up
FATAL: The database system is starting up
FATAL: The database system is starting up
FATAL: The database system is starting up
LOG: database system is ready
2006-01-14 21:39:14.171 Mail[203] Missing multipart boundary parameter; using "smms-1.0.0-05e0f8"
2006-01-14 21:39:14.824 Mail[203] Missing multipart boundary parameter; using "smms-1.0.0-05e178"
2006-01-14 21:39:14.909 Mail[203] Missing multipart boundary parameter; using "smms-1.0.0-05e0f8"
2006-01-14 21:39:15.937 Mail[203] Missing multipart boundary parameter; using "smms-1.0.0-05e168"
2006-01-14 21:44:21.087 Mail[203] Missing multipart boundary parameter; using "smms-1.0.0-05e0f8"
2006-01-14 21:44:21.088 Mail[203] Missing multipart boundary parameter; using "smms-1.0.0-05e178"
2006-01-14 21:44:21.090 Mail[203] Missing multipart boundary parameter; using "smms-1.0.0-05e0f8"
2006-01-14 21:44:21.096 Mail[203] Missing multipart boundary parameter; using "smms-1.0.0-05e168"
2006-01-14 22:04:30.281 Mail[203] Missing multipart boundary parameter; using "smms-1.0.0-05e0f8"
2006-01-14 22:04:30.282 Mail[203] Missing multipart boundary parameter; using "smms-1.0.0-05e178"
2006-01-14 22:04:30.284 Mail[203] Missing multipart boundary parameter; using "smms-1.0.0-05e0f8"
2006-01-14 22:04:30.291 Mail[203] Missing multipart boundary parameter; using "smms-1.0.0-05e168"
2006-01-14 22:09:21.333 Mail[203] Missing multipart boundary parameter; using "smms-1.0.0-05e0f8"
2006-01-14 22:09:21.334 Mail[203] Missing multipart boundary parameter; using "smms-1.0.0-05e178"
2006-01-14 22:09:21.336 Mail[203] Missing multipart boundary parameter; using "smms-1.0.0-05e0f8"
2006-01-14 22:09:21.345 Mail[203] Missing multipart boundary parameter; using "smms-1.0.0-05e168"
I also found this in system.log
Jan 14 21:49:18 Navi-Ultra kernel[0]: USBF: 787.132 [0x152b300] The IOUSBFamily was not able to enumerate a device.
Jan 14 21:49:19 Navi-Ultra kernel[0]: USBF: 787.386 [0x152b300] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 2 of hub @ location: 0x5b210000)
Jan 14 21:50:01 Navi-Ultra kernel[0]: USBF: 829.543 [0x152b300] The IOUSBFamily was not able to enumerate a device.
Jan 14 21:50:01 Navi-Ultra kernel[0]: USBF: 829.813 [0x152b300] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 2 of hub @ location: 0x5b210000)
Jan 14 21:50:44 Navi-Ultra kernel[0]: USBF: 873.170 [0x152b300] The IOUSBFamily was not able to enumerate a device.
Jan 14 21:50:45 Navi-Ultra kernel[0]: USBF: 873.424 [0x152b300] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 2 of hub @ location: 0x5b210000)
Jan 14 21:51:29 Navi-Ultra kernel[0]: USBF: 917.981 [0x152b300] The IOUSBFamily was not able to enumerate a device.
Jan 14 21:51:30 Navi-Ultra kernel[0]: USBF: 918.251 [0x152b300] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 2 of hub @ location: 0x5b210000)
Jan 14 21:52:15 Navi-Ultra kernel[0]: USBF: 964. 8 [0x152b300] The IOUSBFamily was not able to enumerate a device.
Jan 14 21:52:16 Navi-Ultra kernel[0]: USBF: 964.262 [0x152b300] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 2 of hub @ location: 0x5b210000)
Jan 14 21:53:03 Navi-Ultra kernel[0]: USBF: 1011.219 [0x152b300] The IOUSBFamily was not able to enumerate a device.
Jan 14 21:53:03 Navi-Ultra kernel[0]: USBF: 1011.491 [0x152b300] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 2 of hub @ location: 0x5b210000)
Jan 14 21:53:51 Navi-Ultra kernel[0]: USBF: 1059.647 [0x152b300] The IOUSBFamily was not able to enumerate a device.
Jan 14 21:53:51 Navi-Ultra kernel[0]: USBF: 1059.932 [0x152b300] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 2 of hub @ location: 0x5b210000)
Jan 14 21:54:41 Navi-Ultra kernel[0]: USBF: 1109.288 [0x152b300] The IOUSBFamily was not able to enumerate a device.
Jan 14 21:54:41 Navi-Ultra kernel[0]: USBF: 1109.558 [0x152b300] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 2 of hub @ location: 0x5b210000)
Jan 14 21:55:31 Navi-Ultra kernel[0]: USBF: 1160.116 [0x152b300] The IOUSBFamily was not able to enumerate a device.
Jan 14 21:55:32 Navi-Ultra kernel[0]: USBF: 1160.400 [0x152b300] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 2 of hub @ location: 0x5b210000)
Jan 14 21:56:23 Navi-Ultra kernel[0]: USBF: 1212.158 [0x152b300] The IOUSBFamily was not able to enumerate a device.
This USB problem may very well be the backup batterry? I don't know, I can't tell which port is port 2 on the hub (it's generic and has two rows of two ports, four ports all together.)
Looking at the data that I do have, is there anything anyone can tell that's going on? Generally when a Mac has problems, I can figure it out, but this is driving me absolutely nuts since I have no log to trace.
Thank you very much for any help.
P.S. Bluetooth is off (I thought that may have been the problem, it apparently isn't), RAM checks okay. HD checks okay. AirPort works fine. This has been happening since 10.4.3

Okay, I think the USB was one issue. However, now that that has been solved, SystemUIserver, and lookupd are having issues. For example, in console logs I constantly find this:
Jan 27 17:56:10 Navi-Ultra launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[67]: exited abnormally: Hangup
I am certain this is the cause of the problems. I just downloaded the AIRPORTUPDATE2005-01 as indicated in another thread somewhere around here, and have just installed it (but haven't restarted)
Anyone know why that happnes, what's causing this?
Further more, There are tons of things I'm not liking in the logs for today. I never had this problem on my Powermac G4, in the almost 4 years I've owned it. Only on this Mac mini...
here's my entire log for today:
Jan 27 03:15:02 Navi-Ultra cp: error processing extended attributes: Operation not permitted
Jan 27 09:32:44 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 09:32:55 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 09:33:06 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 09:33:17 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 09:33:29 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 09:33:40 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 09:33:51 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 09:34:34 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 09:34:45 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 09:34:56 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 09:35:07 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 10:18:44 Navi-Ultra /Applications/Mail.app/Contents/MacOS/Mail: Corrupt JPEG data: 1203 extraneous bytes before marker 0xd9\n
Jan 27 10:18:50 Navi-Ultra /Applications/Mail.app/Contents/MacOS/Mail: Corrupt JPEG data: 1032 extraneous bytes before marker 0xd9\n
Jan 27 10:18:58 Navi-Ultra /Applications/Mail.app/Contents/MacOS/Mail: Corrupt JPEG data: 983 extraneous bytes before marker 0xd9\n
Jan 27 10:19:01 Navi-Ultra /Applications/Mail.app/Contents/MacOS/Mail: Corrupt JPEG data: 1050 extraneous bytes before marker 0xd9\n
Jan 27 10:19:04 Navi-Ultra /Applications/Mail.app/Contents/MacOS/Mail: Corrupt JPEG data: 919 extraneous bytes before marker 0xd9\n
Jan 27 10:19:07 Navi-Ultra /Applications/Mail.app/Contents/MacOS/Mail: Corrupt JPEG data: 721 extraneous bytes before marker 0xd9\n
Jan 27 10:19:11 Navi-Ultra /Applications/Mail.app/Contents/MacOS/Mail: Corrupt JPEG data: 504 extraneous bytes before marker 0xd9\n
Jan 27 10:19:14 Navi-Ultra /Applications/Mail.app/Contents/MacOS/Mail: Corrupt JPEG data: 784 extraneous bytes before marker 0xd9\n
Jan 27 10:19:17 Navi-Ultra /Applications/Mail.app/Contents/MacOS/Mail: Corrupt JPEG data: 667 extraneous bytes before marker 0xd9\n
Jan 27 10:19:20 Navi-Ultra /Applications/Mail.app/Contents/MacOS/Mail: Corrupt JPEG data: 921 extraneous bytes before marker 0xd9\n
Jan 27 10:19:22 Navi-Ultra /Applications/Mail.app/Contents/MacOS/Mail: Corrupt JPEG data: 883 extraneous bytes before marker 0xd9\n
Jan 27 10:19:24 Navi-Ultra /Applications/Mail.app/Contents/MacOS/Mail: Corrupt JPEG data: 637 extraneous bytes before marker 0xd9\n
Jan 27 10:19:25 Navi-Ultra /Applications/Mail.app/Contents/MacOS/Mail: Corrupt JPEG data: 624 extraneous bytes before marker 0xd9\n
Jan 27 11:02:02 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:48 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:03:58 Navi-Ultra lookupd[89]: NetInfo connection failed for server 127.0.0.1/local
Jan 27 11:24:48 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:03:58 Navi-Ultra lookupd[89]: ni_statistics: Communication failure
Jan 27 11:24:48 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:04:04 Navi-Ultra lookupd[89]: NetInfo connection failed for server 127.0.0.1/local
Jan 27 11:24:48 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:04:04 Navi-Ultra lookupd[89]: ni_statistics: Communication failure
Jan 27 11:24:48 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:04:10 Navi-Ultra lookupd[89]: NetInfo connection failed for server 127.0.0.1/local
Jan 27 11:24:48 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:04:10 Navi-Ultra lookupd[89]: ni_statistics: Communication failure
Jan 27 11:24:48 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:04:16 Navi-Ultra lookupd[89]: NetInfo connection failed for server 127.0.0.1/local
Jan 27 11:24:48 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:04:22 Navi-Ultra lookupd[89]: NetInfo connection failed for server 127.0.0.1/local
Jan 27 11:24:48 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:48 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:48 Navi-Ultra lookupd[89]: NetInfo connection failed for server 127.0.0.1/local
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: AirPort: Link DOWN (AP deAuth 0)
Jan 27 11:24:49 Navi-Ultra kernel[0]: AirPort: Link Active: "NETGEAR" - 000fb564dbd2 - chan 11
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: AirPort: Link DOWN (AP deAuth 0)
Jan 27 11:24:49 Navi-Ultra kernel[0]: AirPort: Link Active: "NETGEAR" - 000fb564dbd2 - chan 11
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:50 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:50 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:50 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:50 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:50 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:50 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:50 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:50 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:50 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:50 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:50 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:50 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:50 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:50 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:50 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:50 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:50 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 11:24:51 Navi-Ultra launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[89]: exited abnormally: Hangup
Jan 27 11:24:52 Navi-Ultra configd[34]: posting notification com.apple.system.config.network_change
Jan 27 11:24:53 Navi-Ultra lookupd[1622]: lookupd (version 369.2) starting - Fri Jan 27 11:24:53 2006
Jan 27 11:24:57 Navi-Ultra launchd: Server 299f in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[1622]: exited abnormally: Hangup
Jan 27 11:24:57 Navi-Ultra lookupd[1627]: lookupd (version 369.2) starting - Fri Jan 27 11:24:57 2006
Jan 27 11:24:57 Navi-Ultra configd[34]: posting notification com.apple.system.config.network_change
Jan 27 11:24:57 Navi-Ultra launchd: Server 29a3 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[1627]: exited abnormally: Hangup
Jan 27 11:24:57 Navi-Ultra lookupd[1628]: lookupd (version 369.2) starting - Fri Jan 27 11:24:57 2006
Jan 27 11:25:01 Navi-Ultra mDNSResponder: HostnameCallback: Error -65557 for registration of Navi Ultra. IP 192.168.0.7
Jan 27 12:45:09 Navi-Ultra ntpd[142]: sendto(17.254.0.27): Can't assign requested address
Jan 27 16:29:54 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 16:30:05 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 16:30:16 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 16:30:27 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 16:30:38 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 16:30:49 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 16:31:00 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 16:31:44 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 16:31:55 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 16:32:06 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 16:32:17 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 16:32:28 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 16:32:39 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 16:33:12 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 16:33:56 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 16:34:07 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 16:34:18 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 16:34:29 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 16:34:40 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 16:34:51 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 16:35:24 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 16:36:08 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 16:36:19 Navi-Ultra kernel[0]: IOATAController device blocking bus.
Jan 27 16:37:58 Navi-Ultra lookupd[1628]: NetInfo connection failed for server 127.0.0.1/local
Jan 27 16:41:16 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:37:58 Navi-Ultra lookupd[1628]: ni_statistics: Communication failure
Jan 27 16:41:16 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:38:04 Navi-Ultra lookupd[1628]: NetInfo connection failed for server 127.0.0.1/local
Jan 27 16:41:16 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:38:04 Navi-Ultra lookupd[1628]: ni_statistics: Communication failure
Jan 27 16:41:16 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:38:10 Navi-Ultra lookupd[1628]: NetInfo connection failed for server 127.0.0.1/local
Jan 27 16:41:16 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:38:16 Navi-Ultra lookupd[1628]: NetInfo connection failed for server 127.0.0.1/local
Jan 27 16:41:16 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:16 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:16 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:16 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:16 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:16 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:16 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:16 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:16 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:16 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:16 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:16 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:16 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:16 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:16 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:16 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:16 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:16 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:16 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:16 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:16 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:16 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:16 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:16 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:16 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:16 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:16 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:16 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:16 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:16 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:16 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:16 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:16 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:16 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:16 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:16 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:16 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:17 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:17 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:17 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:17 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:17 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:17 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:17 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:17 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:17 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:17 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:17 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:17 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:17 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 16:41:17 Navi-Ultra kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
Jan 27 17:55:51 localhost kernel[0]: standard timeslicing quantum is 10000 us
Jan 27 17:55:50 localhost lookupd[48]: lookupd (version 369.2) starting - Fri Jan 27 17:55:50 2006
Jan 27 17:55:51 localhost kernel[0]: vmpagebootstrap: 125567 free pages
Jan 27 17:55:50 localhost mDNSResponder-107.4 (Nov 15 2005 21: 34:38)[44]: starting
Jan 27 17:55:51 localhost kernel[0]: migtable_maxdispl = 70
Jan 27 17:55:51 localhost kernel[0]: 87 prelinked modules
Jan 27 17:55:51 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Jan 27 17:55:51 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Jan 27 17:55:51 localhost kernel[0]: using 1310 buffer headers and 1310 cluster IO buffer headers
Jan 27 17:55:51 localhost kernel[0]: FireWire (OHCI) Apple ID 31 built-in now active, GUID 001451ff fe11e42c; max speed s400.
Jan 27 17:55:51 localhost kernel[0]: CSRHIDTransitionDriver::probe:
Jan 27 17:55:51 localhost kernel[0]: CSRHIDTransitionDriver::start before command
Jan 27 17:55:51 localhost kernel[0]: Security auditing service present
Jan 27 17:55:51 localhost kernel[0]: BSM auditing present
Jan 27 17:55:51 localhost kernel[0]: disabled
Jan 27 17:55:51 localhost kernel[0]: rooting via boot-uuid from /chosen: 40799EC9-BD45-38A5-B4A0-4A0CC77BEC06
Jan 27 17:55:51 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Jan 27 17:55:51 localhost kernel[0]: Got boot device = IOService:/MacRISC2PE/pci@f4000000/AppleMacRiscPCI/ata-6@D/AppleKauaiATA/ATADev iceNub@0/IOATABlockStorageDriver/IOATABlockStorageDevice/IOBlockStorageDriver/ST 9808210A Media/IOApplePartitionScheme/Untitled@3
Jan 27 17:55:51 localhost kernel[0]: BSD root: disk0s3, major 14, minor 2
Jan 27 17:55:51 localhost kernel[0]: jnl: replay_journal: from: 4367360 to: 6987264 (joffset 0x256000)
Jan 27 17:55:51 localhost kernel[0]: CSRHIDTransitionDriver::stop
Jan 27 17:55:51 localhost kernel[0]: HFS: Removed 5 orphaned unlinked files
Jan 27 17:55:51 localhost kernel[0]: Jettisoning kernel linker.
Jan 27 17:55:51 localhost kernel[0]: Resetting IOCatalogue.
Jan 27 17:55:51 localhost kernel[0]: Matching service count = 0
Jan 27 17:55:51 localhost kernel[0]: Matching service count = 1
Jan 27 17:55:51 localhost kernel[0]: Matching service count = 1
Jan 27 17:55:51 localhost kernel[0]: Matching service count = 1
Jan 27 17:55:51 localhost kernel[0]: Matching service count = 1
Jan 27 17:55:51 localhost kernel[0]: Matching service count = 46
Jan 27 17:55:51 localhost kernel[0]: Matching service count = 46
Jan 27 17:55:51 localhost kernel[0]: Matching service count = 46
Jan 27 17:55:51 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
Jan 27 17:55:51 localhost kernel[0]: UniNEnet: Ethernet address 00:14:51:11:e4:2c
Jan 27 17:55:51 localhost kernel[0]: AirPortPCI_MM: Ethernet address 00:11:24:a4:89:7a
Jan 27 17:55:54 localhost diskarbitrationd[36]: disk0s3 hfs 40799EC9-BD45-38A5-B4A0-4A0CC77BEC06 Macintosh HD /
Jan 27 17:55:54 localhost launchd: Server 232f in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[48]: exited abnormally: Hangup
Jan 27 17:55:55 localhost kernel[0]: [HCIController][setupHardware] AFH Is Supported
Jan 27 17:55:55 localhost mDNSResponder: Adding browse domain local.
Jan 27 17:55:56 localhost kernel[0]: ATY,RockHopper2_A: vram [9c000000:02000000]
Jan 27 17:55:56 localhost lookupd[67]: lookupd (version 369.2) starting - Fri Jan 27 17:55:56 2006
Jan 27 17:55:56 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jan 27 17:55:58 localhost loginwindow[68]: Login Window Started Security Agent
Jan 27 17:56:04 Navi-Ultra configd[34]: setting hostname to "Navi-Ultra.local"
Jan 27 17:56:06 Navi-Ultra kernel[0]: AirPort: Link Active: "NETGEAR" - 000fb564dbd2 - chan 11
Jan 27 17:56:10 Navi-Ultra launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[67]: exited abnormally: Hangup
Jan 27 17:56:10 Navi-Ultra configd[34]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
Jan 27 17:56:10 Navi-Ultra configd[34]: posting notification com.apple.system.config.network_change
Jan 27 17:56:10 Navi-Ultra lookupd[81]: lookupd (version 369.2) starting - Fri Jan 27 17:56:10 2006
Jan 27 17:56:10 Navi-Ultra ntpdate[93]: getnetnum: "time.apple.com" invalid host number, line ignored
Jan 27 17:56:10 Navi-Ultra ntpdate[93]: no servers can be used, exiting
Jan 27 17:56:10 Navi-Ultra configd[34]: target=enable-network: disabled
Jan 27 17:56:12 Navi-Ultra ntpd_initres[96]: couldn't resolve `time.apple.com', giving up on it
Jan 27 17:56:17 Navi-Ultra kernel[0]: in_delmulti - ignorning invalid inm (0x656e00c0)
Jan 27 17:56:17 Navi-Ultra configd[34]: posting notification com.apple.system.config.network_change
Jan 27 17:56:17 Navi-Ultra lookupd[131]: lookupd (version 369.2) starting - Fri Jan 27 17:56:17 2006
Jan 27 17:56:21 Navi-Ultra mDNSResponder: HostnameCallback: Error -65557 for registration of Navi Ultra. IP 192.168.0.3

Similar Messages

  • I'm staying at my house in Peru, South America. From my PC laptop I can see my neighbor's wifi service network, but I also have my mini iPad and I can not figure out why I can't get any wifi connection from my area. Is there a setting I need to do?

    I'm staying at my house in Peru, South America. From my PC laptop I can see my neighbor's wifi service network, but I also have my mini iPad and I can not figure out why I can't get any wifi connection from my area. Is there a setting I need to do?

    Yes, I did try to go on my settings>wifi and was waiting for any wifi signals to pick up, but nothing shows up. But on my PC I get a whole list of networks to choose from. Regarding my neighbor, I already have her password that is why I was able to get it on my PC, the problem is that the mini Ipad is not picking any signal neither can it locate me when I go to maps.

  • Can't figure out why I'm dropping frames during capture

    I'm dropping frames when capturing 1-hour Mini DV tapes and I can't figure out why.
    I'm capturing on a Mac Pro (Early '08) with 8 GB of memory running FCP 7.0.3 and OS X 10.6.6. I'm capturing to a 4 TB G-Speed eS (eSATA) formatted as RAID 5 (Non-Journaled Extended) with about 750 GB of remaining space. I'm capturing via FireWire with a Canon GL-2. This should be a breeze for this system.
    I've run Apple Disk Utility, Disc Warrior 4 and Techtool Pro 5 on the drives and they seem to be fine. I've unplugged all USB and FireWire devices besides the keyboard and mouse. No virus protection or background utilities are running. I've trashed preferences. AJA System Test shows a 286 MB/s write speed and 254 MB/s read speed. Blackmagic Disk Speed Test shows a 312 MB/s write speed and a 379 MB/s read speed. No other applications besides FCP are running. I edit 1080p HD footage on this system all day long with no issues but when I try to capture DV SD footage, I run into issues.
    The dropped frames error does not ever occur in the same place on the tapes. The tapes are brand new and don't seem to have any time code issues. The only thing I haven't done is to defragment the hard drives. I wouldn't think that capturing simple DV video would be that demanding; the defragment for a 4 TB RAID would likely take 2 or 3 days.
    Any other ideas on what's going on and how to try to fix it? Thanks!

    Thanks for the prompt reply, Studio X. Yes, I'm using FireWire Basic and no other FireWire devices. I've switched FireWire cables, although I doubt that's the issue as the cable I was using was brand new and fit snuggly. Unfortunately, I don't have an alternate playback device right now. Would switching to Non-controllable device capture settings be worth a try?

  • I have a brand new macbook with microsoft office loaded. I set outlook as the default mail. i would rather go back to mac mail but can't figure out how to do it. any ideas?

    I have a brand new macbook with microsoft office loaded. I set outlook as the default mail. i would rather go back to mac mail but can't figure out how to do it. any ideas?
    Thanks for any help
    Lou

    I have a similar problem: I switched from mac mail to Outlook 2011 as the default client, and want to switch back. Mailto links (eg from browser etc) default to Mail.  However, when I try to email a Word document as an attachment, it continues to open Outlook.  Outlook has a button in its prefs for making it the default client, but I don't see a way to turn this pref off in either Outlook or in Word.  

  • Can't figure out why colors don't totally change when you select type with curser? It looks like it has by looking at it, but when you highlight the area after the old color is still there. It happens with objects to. Driving me NUTZ. Help!

    Can't figure out why colors don't totally change when you select type with curser? It looks like it has by looking at it, but when you highlight the area after the old color is still there. It happens with objects to. Driving me NUTZ. Help!

    Select the text, and open the Appearance palette (Come on guys, text highlight is irrelevant, it happens to objects too says the OP), and see what's listed there.  For a simple text object, there should only be a line item "Type", followed by "Characters", and when double-clicked the Characters line item expands to tell you the stroke and fill color.  For a basic object, there should be a fill and/or stroke.
    What happens sometimes, is that you end up adding extra strokes/fills to objects or text, and the appearance palette is where that will be noted.  Especially when you are dealing with groups, and/or picking up a color with the eyedropper, you may inadvertently be adding a fill or stroke on top of something.  You can drag those unwanted thingies from the Appearance palette into its own little trash can.

  • I tried to Skype someone but I can't see them but they can see me and I can't figure out why?

    I tried to Skype somebody and they can see me but I can't see them and I can't figure out why?

    I'll guess that you're upgrading from Snow Leopard? You should be able to start using your original install dvd by inserting the disc and restarting while holding the C key. Run Disk Utility from your install disc  and try to repair the drive. Then try the upgrade again.

  • Apex bug?  Items being cleared in session state - can't figure out why

    I have an item that is being submitted with a value but is then being overwritten and set to null. I can't see any reason why the submitted value is being overwritten with null.
    I have been debugging this problem for most of the day and can't figure out what is happening and was hoping someone in the forum might be able to shed some light.
    Some details:
    The item is on Page 0, has source type of "PL/SQL Expression or Function", a source expression of "V('REQUEST')", and Source Used = "Always".
    I viewed the HTML source of the rendered page and can see the following HTML, so I know the item has a value when the page is rendered:
    <input type="hidden" id="RENDER_REQUEST" name="p_t08" value="EDIT" />
    I have used Firebug to view the HTTP POST body and can see that p_t08 is being correctly submitted with a value of "EDIT" in the post body.
    When I run the page in debug mode and then view the debug log, I see that Apex is indeed setting this item to null:
         0.01500     0.01600     A C C E P T: Request="WIZ_NEXT"
         0.23400     0.00000     Session State: Save form items and p_arg_values
         0.24900     0.01600     ...Session State: Save "BRANCH_TO_PAGE_ID" - saving same value: ""
         0.24900     0.00000     ...Session State: Save "ROWS_PER_PAGE" - saving same value: ""
         0.26500     0.01500     ...Session State: Save "P0_CLEAR_WS" - saving same value: ""
         0.26500     0.00000     ...Session State: Saved Item "RENDER_REQUEST" New Value=""
    I can't figure out why the item is being set to null.
    This problem also does not occur on every page. The pages in question are a multi-step "wizard" that allows the user to navigate between steps with "Next" and "Previous" buttons. Since this is a page 0 item, it appears on every page in the wizard so I'd expect it to behave the same. When you open the wizard at step 1 and press next to go to step 2, the item (RENDER_REQUEST) is set correctly on step 2 of the wizard, BUT when you then click Next to go to step 3, RENDER_REQUEST is null on step 3. If you open the wizard at step 2 and press Next, RENDER_REQUEST is null on step 3.
    I did find a work around, but it doesn't make any sense why it would work: if I move the RENDER_REQUEST item from the "Footer Items" region to a page level item (by using Edit All and setting its region to blank), then the problem goes away. If I move it back to the "Footer Items" region the problem reoccurs.
    I am working on Application Express 4.0.2.00.07 on Oracle Database 11g Enterprise Edition Release 11.2.0.1.0.
    Any help would be greatly appreciated!
    Thank you.

    Hi Patrick,
    Thanks for the quick response. Unfortunately, I can't reproduce this on apex.oracle.com due because the app requires PL/SQL packages to be installed in several schemas, including some that require system grants (I gave a presentation at Oracle Open World a couple of years ago on some of the techniques I used in building this application that you attended; I think the session was called "Building Large Commercial Applications with Oracle Database 11g and Oracle Application Express").
    Is there another way we can work together to debug this without reproducing it apex.oracle.com? For example, if you could send me an instrumented version of the APEX_040000.F procedure (or whatever procedure is clearing the session state) that has some additional APEX_APPLICATION.DEBUG calls, I could install it on my server, reproduce the error and send you the output.
    Thank you,
    Eric

  • All of a sudden my new iphone will not hold a charge even when it is not being used and I can't figure out why???

    my battery drains even when iphone is not being used.  It is a relatively new phone and this battery draining just started and I can't figure out why????

    Yes, thank you.  My apologies, I was typing one handed and did not add that. 
    Anyway, I have tried deleting the cache, deleting my pics and then re-syncing, etc. and nothing is working This is very frustrating, as I had no problems up until about 2 weeks ago, and now all of a sudden, I have this issue......UGH!

  • Hi, I can't figure out why I can't render on my timeline. I highlight the segment hit "Apple-R" and it gives me a weird message about "conforming HDV video...." and the bar goes as far as 60-66% and holds there forever. It never renders even partially.

    Hi, I can't figure out why I can't render on my timeline. I highlight the segment hit "Apple-R" and it gives me a weird message about "conforming HDV video...." and the bar goes as far as 60-66% and holds there forever. It never renders even partially.

    Yes, I know. I have been working with HDV for some time. I am wondering why it doesn't render when it needs to.. the red and bright-green lines are above, and I've set the render settings such that ANYTHING I highlight and hit apple-R will render. But its not rendering at all.

  • I have an iphone5 that is eating up data time and I can't figure out why? Any thoughts?

    I have an iphone5 that is eating up data time and I can't figure out why? Any thoughts? I have closed everyting I can, even took the phone to Verizon and they are not sure what is going on.   My company email is active and pushes to the phone....I use Safari regularly to look up stuff for personal and work use.  I am on Facebook but have turned it off in notifications.  Four phones and a hotspot on the account....we have 6g and have never come close to it, until lately and it's my phone that's eating up the gigs.  So what the heck is going on?

    Go to Settings/Cellular and you can see how much data each app is using. You can Reset Statistics, then track all of the apps data usage.

  • I'm trying to make an in app purchase and it keeps telling me to come to the support page but I can't figure out why it won't let me do it

    I'm trying to make an in app purchase and it keeps telling me to come to the support page but I can't figure out why it won't let me do it

    And I have gone to the support and it was no help

  • I can't figure out why my reverb and echo things are greyed out

    I can't figure out why my reverb and echo things are greyed out on the bottom right of my screen with the edit tab open for the track. I was going to put a screenshot in here but I couldn't figure it out. I one can understand what I mean. Thank you.

    bennirubber wrote:
    reverb and echo things are greyed out on the bottom right of my screen
    http://www.bulletsandbones.com/GB/GBFAQ.html#effectsdisabled
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Can't figure out why my navbar gets all pixelated online?

    Hi Everyone,
    I'm designing a floating site.  My workflow is PS=====>Fireworks====>Dreamweaver.  I made a navbar in FW with a transparent background and exported html to dreamweaver.  I inserted the fireworks htm, put it online and it looks terrible.  You can see it here:
    http://www.njtraininggrounds.com/thirddaydesign.com/identity.html
    Don't worry about the portfolio button, I know what's going on there.  But I can't figure out why there is "stairstepping" on the logo and on all the navbar buttons.  This is the first time I've ever created a floating site.  I just put a jpeg for repeat using the dreamweaver css, and then inserted the rest in a table. 
    Could anyone give me an idea of what I'm doing wrong?  Thanks so much.
    Wil

    There's no problem with using PNG8, PNG24, or PNG32, other than the huge
    weight of the latter two.  But there's no need to go PNG here.
    Personnaly I see only advantages in using PNG. The good thing about using PNG for graphics like this is that it does not tie you to a background with a certain color. like a GIF with a colored matte does. Should you wish to change your background color later you can keep on using your menu buttons. There is no need to prepare new graphics for the menu just because you change a background color or image.
    As for the "huge" weight of the PNG file, I'd say that depends on your definition of "huge"
    If you compare the filesizes of a simple graphic like that, I see no big improvement by using GIF.
    see screenshot:

  • Can't figure out why my zoom into stills shakes

    I have been using keyframes to create zooms and pans over pics, but every once in a while one of the pics shakes while it's moving. I can't figure out why this happens- any ideas? THANKS

    What you might be experiencing is a scaling issue: you're not really zooming into a picture but actually scaling it. Keep in mind DV is a 4:3 ratio. And your photos probably aren't. Scaling an image is shifting the pixels in an image and so if you're making the picture grow or shrink, you're shifting those pixels and that's could be what you are seeing. What size are your pictures? Are they huge, like twice the size of your standard 720 x 480 DV?
    If your photo images are extremely large (like 2838 x 2205, 300 dpi) you might try opening them up in a program like Photoshop and making a smaller version. You can force the results to be 4:3 by using the Crop tool. Be sure to adjust the Crop settings to something like 1440 px x 960 px , 72 dpi (double 720 x 480 so you can still scale) and then Crop the photo. Keep in mind, you might lose some of the photo because it isn't 4:3, so use Crop judiciously. Save the resulting image as something else and try using it instead of the original. Be sure to _render the results in the Timeline_ even though Final Cut may refer to it as a real-time effect.
    Also you should only have four total keyframes: a keyframe for the starting Scale size and a keyframe for the starting Center position. Then you should have a keyframe for the ending point for both Scale and Center where the image in Final Cut's Canvas window is either larger or smaller. That's it. If you have any other keyframes in-between these four, you can have problems-- which show up as the image moving around, hesitation, or some other unwanted movements.
    Good luck!

  • Can't figure out why my iMac is so slow

    My 2.16 Intel Core 2 Duo iMac has suddenly slowed to a crawl, and I can't figure out why.  Opening anything (including a Finder window) results in a 30 second to 5 minute lag.  I've seen the spinner more in the last month than I did in the previous 4+ years of owning it.
    Since it's my spare machine now, I completely re-formatted the hard drive and did a fresh install of 10.4.7 from the discs it shipped with.  I have run the Apple Hardware Test, and everything tests OK.  Disk Utility tells me there's nothing wrong with the disk, and all permissions are good.  What am I missing?

    Earl...
    I know you said you reformatted the drive but just in case, how much free space on the startup disk?
    Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure you have a minimum of 15% free disk space.
    fresh install of 10.4.7
    Most recent version for Tiger is v10.4.11. Have you tried updating the software from the Apple menu > Software Update?

  • Can't figure out why it's throwing this exception

    Can anyone see a problem with this method? I have checked over everything and can't figure out why it's giving me an exception. All of the get methods are retrieving data and the db table and all the fields are correct.
        // add a Reservation to the database
        public static void addReservation(Reservation aReservation)throws Exception
         try
             String query = "INSERT INTO Reservations (Number, ContactAlias, SPOC, SRNumber, StartDate, EndDate) " +
                           "VALUES ('" + aReservation.getNumber() + "', " +
                           "'" + aReservation.getContact() + "', " +
                           "'" + aReservation.getSPOC() + "', " +
                           "'" + aReservation.getSRNumber() + "', " +
                           "'" + aReservation.getStartDate() + "', " +
                           "'" + aReservation.getEndDate() + "')";
            reservationList.removeAll();
              reservationUIList.removeAll();
              Statement statement = connection.createStatement();
            statement.executeUpdate(query);
              open();
              if( reservationRS !=null)
            while( reservationRS.next() )
                   aNumber = reservationRS.getString(1);
                   reservationList.add(aNumber);
                   reservationUIList.add(aNumber);
              statement.close();
            close();
         catch (Exception e)
                System.out.println("Caught exception in addReservation of DM.");   
                throw e;
         }And the exception:java.sql.SQLException: [Microsoft][ODBC Microsoft Access Driver] Syntax error in INSERT INTO statement.
         at ReservationDM.addReservation(ReservationDM.java:149)
         at Reservation.addReservation(Reservation.java:268)
         at ReservationUI.invokeAdd(ReservationUI.java:552)
         at ReservationUI.actionPerformed(ReservationUI.java:285)
         at java.awt.Button.processActionEvent(Button.java:324)
         at java.awt.Button.processEvent(Button.java:297)
         at java.awt.Component.dispatchEventImpl(Component.java:2588)
         at java.awt.Component.dispatchEvent(Component.java:2492)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:334)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:126)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:93)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:88)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:80)Thanks,
    Shawn

    Well, one extreme that I eventually had to go to was inserting a new row with only the primary keys, which were numerical columns, while just setting the strings to empty values.
    INSERT INTO Courses VALUES(?,?,?,1,0,?,'','','','','','','','','')
    Access finally seemed to handle this without barfing.
    Then, I updated each string column ...if you can believe it ...one at a time in a for loop from a custom 'RowUpdateSet' object. This actually worked well because eventually I also used it to update the row when necessary, and to only update columns whose values had changed. One teeny weeny snippet from a great deal of code looked like this...
      for ( int i=1; i<length; i++ ) {
        if ( updateSet.getUpdateColumn( i ) ) {
          synchronized ( updateSet ) {
            scrollResults.updateObject(i,(String)updateSet.getUpdateValue(i));
            scrollResults.updateRow();
      }I guess I will likely get flamed for participating in this whole discussion, because it all does become quite irrational. I can see why peoples initial response is likely ..."what, couldn't you even debug your own sql string bozo?" All I know is, there seems to be insert statements that Access just mysteriously refuses to perform ...and it has nothing to do with terminated strings or syntax errors. How you choose to perservere and 'get the job done' is probably as unique to each individual as is the whole mysterious error in the first place. I just got tired of staring at what appeared to be a totally disfunctional environment and decided to go around the problem and get done with the project ...which eventually worked like a charm.
    This is exactly what I meant when I said don't look too closely or you might wind up distrusting this technology you are working with on a day to day basis. Frankly, the more I work with technology the more I realize that I, for example, will never use my credit card over the web (particularly with .NET in the picture). I am sure you can find another way to get to the results you want if you think about it creatively. I got my project done. I just didn't get there in the way I had expected I would. Maybe that's not even a bad thing, even though it can be extremely frustrating at times. When we look at all the disclaimers that come with software these days, or look at faster and faster computers that just run slower and slower, maybe we shouldn't expect so much from technology. At least Java allows you to write your own logic and often work around these impediments ...which is still alot better than being stuck with .COM libraries that force you to abandon a project half way through when you find out the library fails to live up to its claims in the reference manual.
    Sorry your project is on hold at the moment. If no one else answers, start a new thread that asks your question again, and I will butt out. Maybe there is someone who has found out what causes this issue. After all, I can only speak from my own experiences ...and I am far from being an authority on any issue surrounding technology. Good luck, and don't give up. I am sure there is a way to get where you want to go.
    After saying all that, I realize kev wrote a response while I was composing this one. As he implores, yes ...do be certain you have eliminated all the obvious possibilities before you adventure into any painfull work-arounds. Really, I wish you all the best of luck.

Maybe you are looking for

  • Installing XP on my Mac

    I am getting ready to install Windows XP on my Macbook but not to sure about how to do it. I did some searching about bootcamp and was wondering if I need to download it or is it already on my Mac Leopard.

  • How do I share printing between mac and Vmware Fusion?

    I am trying to print from mac and from Windows XP installed in a virtual machine via VMWare fusion on my IMac. If I am able to print from Mac then when I switch over to Fusion and try to print it errors stating the the printer is disconnected. If I d

  • Apple/Mac Appending to File path?

    I have the following javascript script runnning in InDesign: if (File.fs == "Windows") { var defaultPath = new File('\\\\server\\path\\to\\file'); } else { var defaultPath = new File('smb://server/path/to/file'); The code works fine in Windows (the f

  • Vendor/Customer Periodic Transfer from GTS - Idoc errors

    Hi Guys Need your help on this, seems like when i am trying to send the reduced message type for /SAPSLL/CREMAS_SLL and DEBMAS_SLL I see that its generating IDOCS but its not communicating - 1 master IDocs set up for message type /SAPSLL/CREMAS_SLL b

  • Search manual about SD-Process in technical-view

    Hi, I'm searching a good manual which explain the SD-processes in technical view. That is a manual, which explain what happened in which files when I for example create a new customer. I have to know what happens if I cancell a invoice. Which Files a