Mac Mini i7 After Yosemite update, sleep mode affecting internet connection
Hi,
I got a Mac Mini i7 for July 2014 everything was awesome. On Monday, October 27th 2014, I notice the port where my Mac Mini is connected, the light is amber colour. When this happens there's no internet connection for the Mac Mini and affects the router has it slows the connection. After doing the following:
1. Turn off Modem for 20mins (hard reset)
2. Turn off Router for 20mins (hard reset)-Router Netgear WNDR4000
3. Set Service Order
4. Change Ethernet Cable
5. Renew the DHCP
I found out the when the Mac Mini goes to sleep mode thats when connections drops. I test where i set it to 1min and voila the port is now amber colour.
I don't want to keep the Mac Mini i7 in "never" status has it decrease life.
Put hard disk to sleep when possible and Wake for network access are checked.
Of course before the update, everything was working fine. Any ideas is appreciated.
Thanks,
Retsel Adrec
Re-installing Yosemite fixed this problem.
Thanks.
Similar Messages
-
hello my mac mini didn't go into sleep mode when i am using an optical thunderbolt cable to my thunderbolt display
has any body els this problemHello josfromkerkade. Please contact me so that I can get more details.
We'd like to understand which monitor you're using, how old it is, which Thunderbolt port you're using (tethered cable or TB port), & the version of firmware.
[email protected]
Thanks, Mitch -
Mac mail CRASHING after Yosemite update 10.10.3
Are you KIDDING APPLE?
mac mail CRASHING after Yosemite update 10.10.3
The program is completely unusable and crashed after update.
Computer is less than 1 month old and can't run a basic mail program
I REALLY HOPE APPLE FIXES THIS BUG ASAP
Without fix I will return the computerTrue,
I also have AppleCare, but unfortunately, after calling them they can't determine what is creating the problem either.
Other forums have shown other troubleshooting steps which didn't solve my problem, but may help others:
Mail app keeps crashing after Yosemite update
Mail crashing after upgrading to 10.10.3
Lets cross our fingers that 10.10.4 will be out shortly to fix this -
My mac mini will go back to sleep mode just after a Wake on WAN
Hi,
I am trying to find the correct setting in order to keep my mac mini woken up after sending a magic packet relayed by my router. My mac is connected via USB to a Drobo Mini which provides external storage capacity.
Basically what happens is the following :
- I wake up my mac via wakeonwan.fr for example
- I get access to my mac for 1 minute (tops)
- I loose access to my mac and I have to wake it up again (typically internal web server pages are not displayed anymore after 1mn)
Configured settings (in the energy saving panel) :
- Idle time before sleep : 15mn
- No HDD stop in case of inactivity
- Wake on LAN activated
In case I configure my mac not to sleep in the energy saving panel, everything works fine, but the goal here would be to save energy from my Mac + NAS and to preserve the use of the HDDs.
Would there be any monitoring commands / hidden threads that could help me know which process is forcing my mac to cut the WAN access / sleep without notice?
Thank you,
SowdahHello Sowdah,
See if it's related to this...
It also seems to be related to later OSX versions, like 10.8.x & 10.9.x
The 2012 macs (and later apparently) (also later OSX versions on earlier Macs can do it also), not waking normally from sleep after hours being in sleep. (noted here ...
http://www.xlr8yourmac.com/archives/feb13/022813.html#2012macswontwake
"Why 2012 iMac/2012 Mac Mini won't Wake After Hours of Sleep (Hibernates/Powers Off)")
The sleepimage file still reappears even if never slept. Delete it (hibernate off, etc) - within minutes its back.
A note on that here - http://www.xlr8yourmac.com/feedback/Chameleon_SSD_Optimizer.html
About iMac sleep...
http://forums.macrumors.com/showthread.php?t=1529750
Try this: "sudo pmset autopoweroff 0" and "sudo pmset standby 0"
http://xlr8yourmac.com/archives/sep13/091313.html#10.8.5SleepEjectTip -
Late 2012 Mac Mini slow after Yosemite upgrade
First time on forums - hope Im not asking a questions that has been asked several times before. I purchased a mac mini not even a year ago, and its was plenty fast until I updated to Yosemite. I also found a link to Etresoft from another questions and ran it. For the sake of expediency - Ill go ahead and post the results. Any thoughts? - all help is more appreciated than I can express in words..
Problem description:
Mac running very slow after Yosemite upgrade
EtreCheck version: 2.1.8 (121)
Report generated February 8, 2015 at 7:30:25 PM PST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
Mac mini (Late 2012) (Technical Specifications)
Mac mini - model: Macmini6,1
1 2.5 GHz Intel Core i5 CPU: 2-core
12 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1067 MHz ok
BANK 1/DIMM0
8 GB DDR3 1067 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000
SMS19A450 1440 x 900 @ 60 Hz
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: one day 23:7:9
Disk Information: ℹ️
APPLE HDD HTS545050A7E362 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 499.25 GB (240.73 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
VIA Labs, Inc. USB3.0 Hub
Western Digital My Book 1230 4 TB
EFI (disk4s1) <not mounted> : 315 MB
Time Machine (disk4s2) /Volumes/Time Machine : 4.00 TB (2.80 TB free)
VIA Labs, Inc. USB3.0 Hub
hub_device
Western Digital My Passport 0741 2 TB
EFI (disk2s1) <not mounted> : 210 MB
2 T - Passport Drive - User Data (disk2s2) /Volumes/2 T - Passport Drive - User Data : 2.00 TB (1.47 TB free)
VIA Labs, Inc. USB2.0 Hub
VIA Labs, Inc. USB2.0 Hub
hub_device
Apple, Inc. Keyboard Hub
Logitech Optical USB Mouse
Apple Inc. Apple Keyboard
MediaTek Inc MT1887 507.9 MB
disk5s1 (disk5s1) <not mounted> : 32 KB
JayHoferEDIT2014 (disk5s2) /Volumes/JayHoferEDIT2014 : 502 MB (0 B free)
Apple, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Firewire Information: ℹ️
Seagate FreeAgent FW 800mbit - 800mbit max
EFI (disk3s1) <not mounted> : 210 MB
2 T - Fire Drive (disk3s2) /Volumes/2 T - Fire Drive : 2.00 TB (1.61 TB free)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Anywhere
Kernel Extensions: ℹ️
/Applications/Magican.app
[not loaded] com.magican.iokit.filemon (1 - SDK 10.7) [Click for support]
[not loaded] com.magican.iokit.netmon (1 - SDK 10.7) [Click for support]
/Library/Application Support/MacKeeper/AntiVirus.app
[not loaded] net.kromtech.kext.AVKauth (2.3.7 - SDK 10.9) [Click for support]
[loaded] net.kromtech.kext.Firewall (2.3.7 - SDK 10.9) [Click for support]
/Library/Extensions
[loaded] com.karios.driver.DuetDisplay (1 - SDK 10.10) [Click for support]
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) [Click for support]
Problem System Launch Agents: ℹ️
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.icloud.fmfd.plist
[killed] com.apple.security.cloudkeychainproxy.plist
[killed] com.apple.telephonyutilities.callservicesd.plist
[killed] com.apple.xpc.loginitemregisterd.plist
5 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.ctkd.plist
[killed] com.apple.emond.aslmanager.plist
[killed] com.apple.wdhelper.plist
[killed] com.apple.xpc.smd.plist
4 processes killed due to memory pressure
Launch Agents: ℹ️
[running] com.brother.LOGINserver.plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[running] com.backblaze.bzserv.plist [Click for support]
[loaded] com.google.keystone.daemon.plist [Click for support]
[running] com.magican.castle.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[running] com.zeobit.MacKeeper.AntiVirus.plist [Click for support]
[running] net.kromtech.MacKeeper.plugin.AntiTheft.daemon.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Click for support]
[running] com.amazon.music.plist [Click for support]
[running] com.backblaze.bzbmenu.plist [Click for support]
[running] net.kromtech.MacKeeper.Helper.plist [Click for support]
User Login Items: ℹ️
duet Application (/Applications/Duet.app)
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Google Drive Application (/Applications/Google Drive.app)
Dropbox Application (/Applications/Dropbox.app)
Google Chrome Application (/Applications/Google Chrome.app)
Box Sync UNKNOWN (missing value)
Knock Application (/Applications/Knock.app)
MagicanMonitor Application (/Applications/Magican.app/Contents/Frameworks/MagicanMonitor.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 [Click for support]
AdobePDFViewer: Version: 11.0.06 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Click for support]
JavaAppletPlugin: Version: Java 8 Update 25 Check version
User internet Plug-ins: ℹ️
Dashlane: Version: Dashlane 1.0.0 - SDK 10.10 [Click for support]
3rd Party Preference Panes: ℹ️
Backblaze Backup [Click for support]
Flash Player [Click for support]
Growl [Click for support]
Java [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 499.25 GB Disk used: 258.52 GB
2 T - Passport Drive - User Data: Disk size: 2.00 TB Disk used: 532.92 GB
Destinations:
My Book [Local]
Total size: 4.00 TB
Total number of backups: 69
Oldest backup: 2014-05-28 08:55:42 +0000
Last backup: 2015-02-09 03:04:24 +0000
Size of backup disk: Adequate
Backup size 4.00 TB > (Disk used 791.44 GB X 3)
Top Processes by CPU: ℹ️
5% WindowServer
4% MailTab Pro for Gmail
3% Google Chrome
2% MagicanMonitor
1% bztransmit
Top Processes by Memory: ℹ️
490 MB MailTab Pro for Gmail
412 MB softwareupdated
283 MB AntiVirus
271 MB Google Chrome Helper EH
232 MB Google Chrome
Virtual Memory Information: ℹ️
2.53 GB Free RAM
6.05 GB Active RAM
1.39 GB Inactive RAM
1.70 GB Wired RAM
91.14 GB Page-ins
154 MB Page-outs
Diagnostics Information: ℹ️
Feb 8, 2015, 08:27:16 AM /Users/[redacted]/Library/Logs/DiagnosticReports/garcon_2015-02-08-082716_[reda cted].crash
Feb 6, 2015, 08:20:10 PM Self test - passed
Feb 6, 2015, 07:49:11 PM /Users/[redacted]/Library/Logs/DiagnosticReports/DashlaneAgent_2015-02-06-19491 1_[redacted].crash1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(1217 ' 0.5 0.25 10 1000 15 5120 1000 25000 1 1 0 100 ' 51 25600 4 10 25 5120 102400 1000 25 1000 80 40 500 300 85 25 20480 262144 20 2000 524288 );k=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts Displays CFBundleIdentifier 'tsA|[ST]M[HL]' PlistBuddy{,' 2>&1'}' -c Print' 'Info\.plist' 'com\\.apple\\.' -\\t N\\/A 'AES|atr|udit|msa|dnse|ax|ensh|fami|FileS|fing|ft[pw]|gedC|kdu|etS|is\.|alk|ODSA|otp|htt|pcas|ps-lp|rexe|rlo|rsh|smb|snm|teln|upd-[aw]|uuc|vix|webf' OSBundle{Require,AllowUserLoa}d );f=('\n%s'{': ','\n\n'}'%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n'"${k[22]}"'%s\n' {Privacy,Mode}': %s\n' '\n ...and %s more line(s)\n' 'RSSI: %s\nNoise: %s\nTx rate: %s\n' '\nContents of %s\n '"${k[22]}"'mod date: %s\n '"${k[22]}"'checksum: %s\n%s\n' '%d MB: %s\n' );b=(com.adobe.{AAM.Updater-1.0{,},AdobeCreativeCloud,CS{4,5}ServiceManager,fpsaud,SwitchBoard{,}} ${k[21]}{aelwriter,{AirPortBaseSt,SafariNotific}ationAgent,FolderActions.enabled,installer.osmessagetracing,mrt.uiagent,ReportCrash.Self,{rp,usb}muxd} com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.daemon{,} com.microsoft.office.licensing.helper com.oracle.java.{Helper-Tool,JavaUpdateHelper{,}} com.teamviewer.{Helper,teamviewer{,_desktop,_service}} org.macosforge.xquartz.{privileged_{,},}startx );c=(879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 2636415542 3694147963 1233118628 2456546649 2806998573 2778718105 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 3374894509 1051159591 892310726 1707497389 523110921 2883943871 3873345487 );s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[4]} ' s/:$//;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[9]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' BEGIN { FS=":";if(system("sw_vers -productVersion|grep -q ^10\.1")) d="^'"${k[21]}"'launch(d\.peruser\.[0-9]+|ctl\.(Aqua|Background|System))$";} { if($2~/[1-9]/) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else if(!d||$1!~d) print $1;} ' ' { sub(/ :/,"");print|"tail -n'${p[10]}'";} ' ' NR==2&&$4<='${p[7]}' { print $4;} ' ' ($1~"wir"&&$2>'${p[22]}')||($1~"uts"&&$2>'${p[19]}') { print $1" "int($2);} ' '|grep DYLD' ' { q=$1;$1="";u=$NF;$NF="";gsub(/ +$/,"");print q":"$0":"u;} ' ' /^ {6}[^ ]/d;s/:$//;/([^ey]|[^n]e):/d;/e: Y/d;s/: Y.+//g;H;${ g;s/ \n (\n)/\1/g;s/\n +(M[^ ]+)[ -~]+/ (\1)/;s/\n$//;/( {8}[^ ].*){2,}/p;} ' 's:^:/:p;' ' !/ /{print};END{if(NR<'{${p[12]},${p[13]}}')printf("^'"${k[21]}"'.+")} ' '|uniq' ' 1;END { if(NR<'{${p[14]},${p[21]}}') printf("^/[Sp]|'${k[21]}'");} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p;' '&&echo On' '/\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt)$/p' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".","");print;} END { split("'"${b[*]}"'",b);split("'"${c[*]}"'",c);for(i in b) print b[i]".plist\t"c[i];} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/((iTu|ok).+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt))$/p;' ' $2=="=" { gsub(/[()"]/,"",$3);print $3;} ' ' /^\// { sub("/dev/","",$1);printf("%s: %s\n",$1,$9);} ' '>&-||echo No' '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[2]}'{$2=$2-1;print}' ' BEGIN { M1='${p[16]}';M2='${p[18]}';M3='${p[8]}';M4='${p[3]}';} !/^A/{next};/%/ { getline;if($5<M1) o["CPU"]="CPU: user "$2"%, system "$4"%";next;} $2~/^disk/&&$4>M2 { o[$2]=$2": "$3" ops/s, "$4" blocks/s";next;} $2~/^(en[0-9]|bridg)/ { if(o[$2]) { e=$3+$4+$5+$6;if(e) o[$2]=o[$2]"; errors "e"/s";next;};if($4>M3||$6>M4) o[$2]=$2": in "int($4/1024)", out "int($6/1024)" (KiB/s)";} END { for(i in o) print o[i];} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&& $3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' $1=="op" {m=$3};$1~"lN" {N=$2};$1~"lR" {S=$2};$1~"Tx" {T=$2};$1~/^st/ {s=$2};$1~"li"&&$3!~"wpa2" {printf("'"${f[5]}"'",toupper($3))};END { if(S*N*T&&(S-N<'${p[5]}'||T<'${p[20]}')) printf("'"${f[8]}"'",S,N,T);if(s~/^r/&&m!~/^st/) printf("'"${f[6]}"'",m);} ' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1;} ' ' BEGIN { split("'"${p[1]}"'",m);FS=":";} $2<=m[$1]{next} $1<9 { o[$1]=o[$1]"\n "$3" (UID "$4"): "$2;} $1==9&&$5!~"^/dev" { o[$1]=o[$1]"\n "$3" (UID "$4") => "$5" (status "$6"): "$2;} $1==10&&$5 { p="ps -c -ocomm -p"$5"|sed 1d";p|getline n;close(p);if(n) $5=n;o[$1]=o[$1]"\n "$5" => "$3" UID ("$4"): "$2;} $1~/1[12]/ { o[$1]=o[$1]"\n "$3" (UID "$4", error "$5"): "$2;} END { u1="Mb/s";u2="per sec";u3="ms/s";u4="KiB/s";u5="%";u6="total";u7="MB";u8="ports";u[1]=u1;u[2]=u1;u[3]=u3;u[4]=u4;u[5]=u5;u[6]=u6;u[7]=u7;u[8]=u8;u[9]=u2;u[10]=u2;u[11]=u2;u[12]=u2;l[1]="Net in";l[2]="Net out";l[3]="I/O wait time";l[4]="I/O requests";l[5]="CPU usage";l[6]="Open files";l[7]="Memory";l[8]="Mach ports";l[9]="File opens";l[10]="Forks";l[11]="Failed forks";l[12]="System errors";for(i in o) print "\n"l[i]" ("u[i]")\n"o[i];} ' ' END{if($3~/[0-9]/)print$3} ' ' BEGIN { L='${p[17]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${k[18]}"' "F|getline g) { l++;if(l<=L) f=f"\n "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n '"${k[22]}"'"T;printf("'"${f[9]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' 's/^.{52}(.+) <.+/\1/p' ' /id: N|te: Y/{i++} END{print i} ' ' /kext:/ { split($0,a,":");p=a[1];k[S]='${k[25]}';k[U]='${k[26]}';v[S]="Safe";v[U]="true";for(i in k) { s=system("'"${k[18]}"'\\ :"k[i]" \""p"\"/*/I*|grep -qw "v[i]);if(!s) a[1]=a[1]" "i;};if(!a[2]) a[2]="'"${k[23]}"'";printf("'"${f[4]}"'",a[1],a[2]);next;} !/^ *$/ { p="'"${k[19]}"'\\ :'"${k[16]}"' \""$0"\"/*/'${k[20]}'";p|getline b;close(p);if(b~/ /||b=="") b="'"${k[23]}"'";printf("'"${f[4]}"'",$0,b);} ' '/ en/!s/\.//p' ' NR>=13 { gsub(/[^0-9]/,"",$1);print;} ' ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?'${k[20]}'$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' '/^find: /!p;' ' /^p/{ s/.//g;x;s/\nu/:/;s/(\n)c/\1:/;s/\n\n//;p;};H;' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;p;' ' s/^.+ |\(.+\)$//g;p;' '1;END{if(NR<'${p[15]}')printf("^/(S|usr/(X|li))")}' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END{ if(i>1)print n} ' s/{'\.|jnl: ','P.+:'}'//;s/ +([0-9]+)(.+)/\2 \1/p' ' /es: ./{ s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(B2|[my]): /H;d;:0'$'\n'' x;/[my]: [AM]|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/:(0|-(4[34])?)$/p' '|sort'{'|uniq'{,\ -c},\ -nr} ' s/^/'{5,6,7,8}':/;s/ *: */:/g;p;' '/e:/{print $2}' ' /^[(]/{ s/....//;s/$/:/;N;/: [)]$/d;s/\n.+ ([^ ]+).$/\1/;H;};${ g;p;} ' 's/:.+$//p' '|wc -l' /{\\.{kext,xpc,'(appex|pluginkit)'}'\/(Contents\/)?'Info,'Launch[AD].+'}'\.plist$/p' 's/([-+.?])/\\\1/g;p' 's/, /\'$'\n/g;p' ' BEGIN{FS=":"} { printf("'"${f[10]}"'",$1/1048576,$2);} ' ' /= D/&&$1!~/'{${k[24]},${k[17]}}'/ { getline d;if(d~"t") D=D"\n"$1;} END { print D;} ' ' NR>1&&$3!~/0x|\.([0-9]{3,}|[-0-9A-F]{36})$/ { print $3":"$2;} ' '|tail -n'${p[6]} ' $1>1 { $NF=$NF" x"$1;} /\*/ { if(!f) f="\n\t* Code injection";} { $1="";} 1;END { print f;} ' ' s/.+bus /Bus: /;s/,.+[(]/ /;s/,.+//p;' ' { $NF=$NF" Errors: "$1;$1="";} 1 ' ' 1s/^/\'$'\n''/;1s/:/ tree/;/^ +[MPSV].+:../d;s/:$//;p;' 's/,.+"//p' '|grep -q e:/' '/[^ .]/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab kextfind top pkgutil "${k[18]}\\" echo cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin /' env pluginkit scutil 'dtrace -q -x aggsortrev -n' profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat mdls route egrep 'dscl . -read' );c2=(${k[21]}loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'" 'L*/Ca*/'${k[21]}'Saf*/E* -d 2 -name '${k[20]} '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' -i '-nl -print' '-F \$Sender -k Level Nle 3 -k Facility Req "'${k[21]}'('{'bird|.*i?clou','lsu|sha'}')"' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message CRne '0xdc008012|calling|(complet|enabl)ed|ry HD' -k Message CReq 'bad |corru|dead|fail|GPU |hfs: Ru|inval|v_c|NVDA\(|pagin|error|TCON|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o%cpu,comm,ruid' "' syscall::recvfrom:return {@a[execname,uid]=sum(arg0)} syscall::sendto:return {@b[execname,uid]=sum(arg0)} syscall::open*:entry {@c[execname,uid,copyinstr(arg0),errno]=count()} syscall::execve:return, syscall::posix_spawn:return {@d[execname,uid,ppid]=count()} syscall::fork:return, syscall::vfork:return, syscall::posix_spawn:return /arg0 < 0/ {@e[execname,uid,arg0]=count()} syscall:::return /errno != 0/ {@f[execname,uid,errno]=count()} io:::wait-start {self->t=timestamp} io:::wait-done /self->t/ { this->T=timestamp - self->t;@g[execname,uid]=sum(this->T);self->t=0;} io:::start {@h[execname,uid]=sum(args[0]->b_bcount)} tick-10sec { normalize(@a,2560000);normalize(@b,2560000);normalize(@c,10);normalize(@d,10);normalize(@e,10);normalize(@f,10);normalize(@g,10000000);normalize(@h,10240);printa(\"1:%@d:%s:%d\n\",@a);printa(\"2:%@d:%s:%d\n\",@b);printa(\"9:%@d:%s:%d:%s:%d\n\",@c);printa(\"10:%@d:%s:%d:%d\n\",@d);printa(\"11:%@d:%s:%d:%d\n\",@e);printa(\"12:%@d:%s:%d:%d\n\",@f);printa(\"3:%@d:%s:%d\n\",@g);printa(\"4:%@d:%s:%d\n\",@h);exit(0);} '" '-f -pfc /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;' '/S*/*/Ca*/*xpc*' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' kMDItemContentTypeTree=${k[21]}{bundle,mach-o-dylib} :Label "/p*/e*/{aut*,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {/p*,/usr/local}/e*/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/{Lau,Sec}*/*t .launchd.conf" list '-F "" -k Sender hidd -k Nle 3' /Library/Preferences/${k[21]}alf\ globalstate --proxy '-n get default' -I --dns -get{dnsservers,info} -P -m\ / '' -n1 '-R -ce -l1 -n5 -o'{'prt -stats prt','mem -stats mem'}',command,uid' -kl -l -s\ / '--regexp --files '${k[21]}'pkg.*' '+c0 -i4TCP:0-1023' ${k[21]}dashboard\ layer-gadgets '-d /L*/Mana*/$USER' '-app Safari WebKitDNSPrefetchingEnabled' '-Fcu +c0 -l' -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' '-F \$Message -k Sender kernel -k Message CReq "'{'n Cause: -','(a und|I/O |jnl_io.+)err','USBF:'}'"' -name\ kMDItem${k[16]} -T\ hfs '-n get default' -listnetworkserviceorder :${k[16]} :CFBundleDisplayName $EUID {,'/{S*/,}'}'L*/{,Co*/*/*/L*/}{Cache,Log}s $TMPDIR../C -type f -size +'${p[11]}'M -exec stat -f'%z:%N' {} \;' \ /v*/d*/*/*l*d{,.*.$UID}/* '-app Safari UserStyleSheetEnabled' "-o ',\"name\":\"[^\"]+' L*/A*/Fi*/P*/*/a*.json" users/$USER\ HomeDirectory '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' ' -F "\$Time \$Sender \$(RefProc): \$Message" -k Level Nle 3 -k Facility R'{'ne "user|','eq "'}'console" -k Message CRne "sandbox ex" ' );N1=${#c2[@]};for j in {0..15};do c2[N1+j]=SP${k[j]}DataType;done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel,Firefox}\ extensions System\ load boot\ args FileVault\ {2,1} {Kernel,System,Console}\ log Activity SMC Login\ hook 'I/O per process' 'High file counts' UID Daemons Agents XPC\ cache Startup\ items {Admin,Root}\ access Bundles {,Inserted\ }dylibs Stylesheet Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory\ pressure Listeners Widgets Parental\ Controls Prefetching Nets Volumes {Continuity,I/O,iCloud,HID,HCI}\ errors {User,System}\ {caches/logs,overrides} Shutdown\ codes Heat Diagnostic\ reports Bad\ plists Free\ space VM );N3=${#l[@]};for i in {0..8};do l[N3+i]=${k[5+i]};done;F() { local x="${s[$1]}";[[ "$x" =~ ^([\&\|\<\>]|$) ]]&&{ printf "$x";return;};:|${c1[30]} "$x" 2>&-;printf "%s \'%s\'" "|${c1[30+$?]}" "$x";};A0() { Q=6;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo -v;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;date '+Start time: %T %D%n';printf '\n[Process started]\n\n'>&4;printf 'Revision: %s\n\n' ${p[0]};};A1() { local c="${c1[$1]} ${c2[$2]}";shift 2;c="$c ` while [[ "$1" ]];do F $1;shift;done`";((P2))&&{ c="sudo $c";P2=;};v=`eval "$c"`;[[ "$v" ]];};A2() { local c="${c1[$1]}";[[ "$c" =~ ^(awk|sed ) ]]&&c="$c '${s[$2]}'"||c="$c ${c2[$2]}";shift 2;local d=` while [[ "$1" ]];do F $1;shift;done`;((P2))&&{ c="sudo $c";P2=;};local a;v=` while read a;do eval "$c '$a' $d";done<<<"$v";`;[[ "$v" ]];};A3(){ v=$((`date +%s`-v[3]));};B1() { v=No;! ((v[1]))&&{ v=;P1=1;};};eval "`type -a B1|sed '1d;s/1/2/'`";B3(){ v[$1]="$v";};B4() { local i=$1;local j=$2;shift 2;local c="cat` while [[ "$1" ]];do F $1;shift;done`";v[j]=`eval "{ $c;}"<<<"${v[i]}"`;};B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`egrep -v "${v[$1]}"<<<"$v"|sort`;};eval "`type -a B7|sed '1d;s/7/8/;s/-v //'`";C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { B4 0 0 63&&C1 1 $1;};C4() { echo $'\t'"Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};C5() { sudo -k;pbcopy<<<"$o";printf '\n\tThe test results are on the Clipboard.\n\n\tPlease close this window.\n';exit 2>&-;};for i in 1 2;do eval D${i}0'(){ A'$i' $@;C0;};';for j in 2 3;do eval D$i$j'(){ local x=$1;shift;A'$i' $@;C'$j' $x;};';done;done;trap C5 2;o=$({ A0;D10 0 N1+1 2;D10 0 $N1 1;B1;C2 27;B1&&! B2&&C2 28;D12 22 15 63;D10 0 N1+2 3;D10 0 N1+15 17;D13 3 0 N1+3 4;D13 4 0 N1+4 5;D13 N3+4 0 N1+9 59;for i in 0 1 2;do D13 N3+i 0 N1+5+i 6;done;D13 N3+3 0 N1+8 71;D13 62 1 10 7;D13 10 1 11 8;B2&&D13 18 19 53 67;D12 11 2 12 9;D12 12 3 13 10;D12 13 42 70 101 25;D12 65 6 36 13;D12 45 20 52 66;D13 66 7 37 14;D13 17 8 15 38;D10 9 16 16 77 45;C4;B2&&D10 35 49 61 75 76 78 45;B2&&{ D10 28 17 45;C4;};D10 12 40 54 16 79 45;D10 12 39 54 16 80 45;D13 31 25 37 15;B2&&D13 19 21 0;B2&&D13 40 10 42;B2&&D12 2 29 35 46;D12 44 34 43 53;D12 25 22 20 32;D12 33 0 N1+14 51;D12 34 21 28 35;D13 35 27 29 36;A1 40 59 81;B3 18;A1 33 60 82;B8 18;B4 0 19 83;A1 27 32 39&&{ B3 20;B4 19 0;A2 33 33 40;B3 21;B6 20 21 3;};C2 36;D13 50 38 5 68;B4 19 0;D23 37 33 34 42;B2&&D13 46 35 45 55;D13 38 32 31 43;B2&&D13 59 4 65 76 91;D13 63 4 19 44 75 95 96;B1&&{ D13 53 5 55 75 69&&D13 51 6 58 31;D13 56 5 56 97 75 98&&D10 0 N1+7 99;D12 55 5 27 84;D13 61 5 54 75 70;D13 14 5 14 12;D13 15 5 72 12;C4;};D13 16 5 73 12;A1 13 44 74 18;C4;B3 4;B4 4 0 85;A2 14 61 89;B4 0 5 19 102;A1 17 41 20;B7 5;C3 8;B4 4 0 88;A2 14 24 89;C4;B4 0 6 19 102;B4 4 0 86;A2 14 61 89;B4 0 7 19 102;B5 6 7;B4 6 6 73 102;B2&&{ A1 18 26 94;B7 6;B4 0 0 11;C3 23;};A1 18 26 94;B7 6;B4 0 0 11;C3 24;D13 60 14 66 92;D13 58 14 67 93;D13 26 4 21 24;D13 42 14 1 62;D13 43 37 2 90 48;D13 41 10 42;D12 48 36 47 25;A1 4 3 60&&{ B3 5;A2 14 61;B4 0 6 21;B4 5 0;A2 14 62;B4 0 0 21;B6 0 6 4;C3 5;};D13 9 41 69 100;D12 32 21 68 35;D12 49 21 48 49;B4 4 22 57 102;A1 21 46 56 74;B7 22;B4 0 0 58;C3 47;D13 54 5 7 75 76 69;D13 52 5 8 75 76 69;D13 57 4 64 76 91;D12 0 4 4 84;D12 1 4 51 84;D13 21 22 9 37;A1 23 18 28 89;B4 0 16 22 102;A1 16 25 33;B7 16;B4 0 0 34;D20 31 47;D13 64 4 71 41;C4;B4 4 12 26 89 23 102;for i in {0..3};do A1 0 N1+10+i 72;B7 12;B4 0 0 52;C3 N3+5+i;((i))||C4;done;A1 24 22 29;B7 12;B3 14;A2 39 57 30;B3 15;B6 14 15 4;C3 29;B4 4 13 27 89 65;A1 24 23;B7 13;C3 30;B4 4 0 87;A2 14 61 89 20;B4 0 16;A1 26 50 64;B7 16;C3 6;D13 7 11 6;A3;C2 39;C4;} 4>&2 2>/dev/null;);C5
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
Part 1 of 8 done at … sec
Part 8 of 8 done at … sec
The results are on the Clipboard.
Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it. Then go to the next step.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I may not agree with them.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Mac mini does not stay in sleep mode
Another sleep issue here: Mac mini (late 2012) will not remain in sleep mode since updating to OSX 10.8.5, I had no problem with 10.8.4. System log seems to indicate that the USB controller is sending a wake signal (lists all USB contoller ports as possible source). I have reset the NVRAM to no effect. Any suggestions how to proceed. I am not ready to update to Mavericks yet, which may or may not solve problem. I would like to sort this out if possible in 10.8.5.
Look down towards the bottom of > Why your Mac might not sleep or stay in sleep mode
Are a keyboard and mouse connected and working correctly?
Do you have any other external USB or FireWire devices connected? Try removing or disconnecting them one by one, when not in use, taking care to dismount any that are storage devices before disconnecting them. -
My mac mini (2009) won't enter sleep mode
My mac mini won't enter sleep mode using the power button (previously did).
Preferences for this command have been checked - with no effect.Try resetting the SMC
http://support.apple.com/kb/HT3964?viewlocale=en_US -
Instability in 2012 Mac Mini Server after Yosemite 10.1.1 Install
I bought a NEW 2012 Mac Mini server on clearance in the online Apple Store last month. I had a 256 SDD installed as startup drive along with Yosemite earlier this week. It crashes, freezes and randomly restarts. Not sure where to start with trying to figure this out. Any help would be greatly appreciated.
It happens under various circumstances but here is the report on the latest that happened a few minutes ago. I had clicked on the Desktop Icon "Macintosh SSD", the boot drive. I got the spinning wheel and then a spontaneous restart.
I apologize if too much of the report is included here. Not sure where to stop.
Crash-panic Report. When I clicked on Macintosh SSD (Boot Drive) I got a spinning wheel followed by a system restart.
Anonymous UUID: C76AE31B-9D00-CD21-F920-DF88D8F8A0C9
Fri Jan 23 12:15:49 2015
*** Panic Report ***
panic(cpu 6 caller 0xffffff8004fc4594): "launchd died\nState at Last Exception:\n\n"@/SourceCache/xnu/xnu-2782.1.97/bsd/kern/kern_exit.c:361
Backtrace (CPU 6), Frame : Return Address
0xffffff8018f13e50 : 0xffffff8004b3a811
0xffffff8018f13ed0 : 0xffffff8004fc4594
0xffffff8018f13f40 : 0xffffff8004fc425c
0xffffff8018f13f50 : 0xffffff800504dcb2
0xffffff8018f13fb0 : 0xffffff8004c3ac46
BSD process name corresponding to current thread: launchd
Mac OS version:
14B25
Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
Kernel slide: 0x0000000004800000
Kernel text base: 0xffffff8004a00000
__HIB text base: 0xffffff8004900000
System model name: Macmini6,2 (Mac-F65AE981FFA204ED)
System uptime in nanoseconds: 10149976048674
last loaded kext at 9896523213358: com.apple.iokit.SCSITaskUserClient 3.7.0 (addr 0xffffff7f87299000, size 36864)
last unloaded kext at 9957569541796: com.apple.driver.AppleUSBCDC 4.2.2b5 (addr 0xffffff7f87295000, size 16384)
loaded kexts:
com.apple.filesystems.msdosfs 1.10
com.apple.driver.AudioAUUC 1.70
com.apple.driver.AGPM 100.14.37
com.apple.driver.ApplePlatformEnabler 2.1.0d1
com.apple.driver.X86PlatformShim 1.0.0
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.3.1f2
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.driver.AppleMCCSControl 1.2.10
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.driver.AppleHDA 267.0
com.apple.driver.AppleMikeyDriver 267.0
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleIntelHD4000Graphics 10.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleLPC 1.7.3
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.1f2
com.apple.driver.AppleHV 1
com.apple.driver.AppleIntelFramebufferCapri 10.0.0
com.apple.driver.AppleThunderboltIP 2.0.2
com.apple.driver.AppleIRController 327.5
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.5
com.apple.driver.AppleUSBHub 705.4.1
com.apple.driver.AirPort.Brcm4360 901.19.10
com.apple.driver.AppleSDXC 1.6.5
com.apple.iokit.AppleBCM5701Ethernet 10.1.2b3
com.apple.driver.AppleFWOHCI 5.5.2
com.apple.driver.AppleAHCIPort 3.0.7
com.apple.driver.AppleUSBEHCI 705.4.14
com.apple.driver.AppleUSBXHCI 705.4.14
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.0
com.apple.iokit.IOUSBMassStorageClass 3.7.0
com.apple.driver.AppleBluetoothHIDMouse 185.3
com.apple.driver.AppleHIDMouse 185.3
com.apple.driver.IOBluetoothHIDDriver 4.3.1f2
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 11
com.apple.driver.DspFuncLib 267.0
com.apple.kext.OSvKernDSPLib 1.15
com.apple.iokit.IOAudioFamily 200.6
com.apple.vecLib.kext 1.2.0
com.apple.iokit.IOSurface 97
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.8.0d49
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.1f2
com.apple.iokit.IOBluetoothFamily 4.3.1f2
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.driver.AppleSMC 3.1.9
com.apple.iokit.IOAcceleratorFamily2 156.4
com.apple.AppleGraphicsDeviceControl 3.7.21
com.apple.driver.AppleHDAController 267.0
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOHDAFamily 267.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.0
com.apple.driver.AppleHIDKeyboard 175.5
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.iokit.IOUSBHIDDriver 705.4.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.driver.AppleThunderboltDPInAdapter 4.0.6
com.apple.driver.AppleThunderboltDPAdapterFamily 4.0.6
com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2
com.apple.driver.AppleThunderboltNHI 3.1.7
com.apple.iokit.IOThunderboltFamily 4.2.1
com.apple.iokit.IO80211Family 700.52
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOFireWireFamily 4.5.6
com.apple.iokit.IOAHCIFamily 2.7.0
com.apple.iokit.IOUSBFamily 705.4.14
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 389.1
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.Libm 1
com.apple.kec.pthread 1
System Profile:
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x10E), Broadcom BCM43xx 1.0 (7.15.124.12.10)
Bluetooth: Version 4.3.1f2 15015, 3 services, 27 devices, 1 incoming serial ports
Thunderbolt Bus: Mac mini, Apple Inc., 23.4
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3831554738454655302D474E2D4620
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3831554738454655302D474E2D4620
USB Device: Hub
USB Device: Hub
USB Device: Hub
USB Device: IR Receiver
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
Serial ATA Device: OWC Mercury Electra 6G SSD, 240.06 GB
Serial ATA Device: HGST HTS721010A9E630, 1 TB
Model: Macmini6,2, BootROM MM61.0106.B03, 4 processors, Intel Core i7, 2.3 GHz, 16 GB, SMC 2.8f0
Network Service: Ethernet, Ethernet, en0
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-InGlad that you got it solved, John. That model was only replaced at the end of last year, it is not that old and far better in terms of flexibility than the current models. Although the current models are growing away from SATA and towards PCI which, in its logical conclusion, will be faster ito access (read and write), speeds.
Linc's advice was 100% spot-on.
Have fun with your 'new' Mini
Leo -
TS1541 new mac mini. woke it up from sleep mode, user password suddenly not working. ideas?
After initial set up left the brand new mac mini for an hour or so. On return, the password that had been working thus far was entered but did not work. cannot now login to brand new mini. Ideas please?
Reset Password 10.7, 10.8...
http://reviews.cnet.com/8301-13727_7-20087723-263/how-to-run-the-password-reset- utility-in-os-x-10.7-lion/
Then Reset your Keychain...
http://support.apple.com/kb/TS1544 -
Mac mini freezes after software update install in leopard
hello,
ever since i purchased my mac mini 8 months ago, it freezes when installing a software update that requires a restart. it seems to get through the whole process, but then freezes with the default galaxy desktop (even though that is no longer my desktop) with nothing else on the screen. i have even tried doing installs over night, but it is still hanging at the galaxy screen when i wake up in the morning.
unfortunately i did not deal with this when i still had my warranty and would like to avoid purchasing apple care.
any ideas? thanks so much!
joseph
Message was edited by: Joseph HallauxI have exactly the same problem. My mac-mini was purchased only a few months ago. I downloaded the most recent update recommended by software update. I don't remember everything that was in the update but it included several files providing support for various digital cameras and iphoto. My mac mini is frozen showing only a white screen.
-
MBC 15' retina not detecting my ipad mini OS8 after yosemite update
Why does my MBC not detect my ipad anymore and why has the bluetooth icon dissapeared from my status bar? Any help will be much appreciated
Hello there, Archietech.
The following Knowledge Base article offers some great steps for troubleshooting issues with an iOS Device not recognized in iTunes for OS X:
iOS: Device not recognized in iTunes for OS X - Apple Support
Follow these steps to resolve your issue:
If you haven't connected your iOS device to this computer before, unlock the device and tap Trust. Learn more about the Trust This Computer alert.
Restart your iOS device.
Restart your Mac.
Make sure that your Mac meets the minimum system requirements for your iPhone, iPad, or iPod touch.
Install software updates on your Mac.
If an iTunes update is available, apply the update.
Check USB connections. iOS devices need USB 2.0 to work properly. If you're not sure your Mac has USB 2.0 ports, check the computer's specifications.
Disconnect other USB devices and connect your device directly to a USB port on your Mac.
Try another USB cable.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
TS4113 Mac mini looses audio output through HDMI after being in 'sleep mode'
Since a month or so, my Mac mini is unable to send audio through HDMI output after being in 'sleep mode'.
Recently this was no problem, but now I cannot hear anything after unsleeping (unless I reboot fully).
Please help.This is not just a Mac Mini problem. I've found comments from people with all kinds of Mac, with any kind of external sound device, who all have this same issue.
The common factor is Mountain Lion.
Apparently there is a new build (12F42) which is supposed to fix this.
http://www.gadgetguide4u.com/new-os-x-1085-build-number-12f42.html
Apple released it to their employees on the 25th Sept.
Here's hoping that build is available for the rest of us soon ... -
Why does my Mac Mini go into a safe boot mode after put to sleep?
Why does my Mac Mini go into a safe boot mode after I put it to sleep?
HI, can you tell us how you know it's Safe Mode?
Not sure if this applies to the new Macs, but if not I doubt it'll hurt anything...
After using Safe Boot, to return to a normal startup, execute this command in Terminal or the command line:
sudo nvram boot-args=""
http://support.apple.com/kb/HT1455 -
Mac Mini mid 2011 Mountain Lion sleep and don't wake after +/- 6h of sleep
Hello all.
I Have a Mac Mini mid 2011 with Mountain Lion 10.8.5. connected to Wi-Fi network with Time Capsule, with back to Mymac enabled as well as ssh.
The power save is set as default to wake up on lan, put to sleep the disks as nedeed.
It works fine , and i can wake him up by back to mymac or just ssh to until +/- 6 hours of inactivity, after I Can't wake him up unless by bluetooth or with the power button.
I had made a fresh install but it works realy the same.
Before update to Mountain Lion , it was working fine.
Can someone help me
Thanks in advance.
PCYou don't need an expensive USB keyboard, a £10 Logitech UK - Keyboard K120 will work just fine for booting into the Recovery Partition to Repair or Reinstall OS X.
Also see > OS X: About OS X Recovery -
Why when i set my mac in sleep it starts alone and also complete stop without I do anything (Mac mini Mid 2011 - Yosemite)
in response to lllaass
here what I copied from Console:
27/12/2014 02:29:58,457 WindowServer[185]: WSGetSurfaceInWindow : Invalid surface 1336265605 for window 268
27/12/2014 02:30:02,516 WindowServer[185]: WSBindSurface : Invalid surface 1040636110 for window 266
27/12/2014 02:30:17,370 com.apple.xpc.launchd[1]: assertion failed: 14B25: launchd + 160118 [55B9FF23-B298-321A-B776-CF7676586C04]: 0xe
27/12/2014 02:30:17,371 com.apple.xpc.launchd[1]: assertion failed: 14B25: launchd + 160118 [55B9FF23-B298-321A-B776-CF7676586C04]: 0xe
27/12/2014 02:30:18,819 Office365Service[2012]: WARNING: The Gestalt selector gestaltSystemVersion is returning 10.9.1 instead of 10.10.1. Use NSProcessInfo's operatingSystemVersion property to get correct system version number.
Call location:
27/12/2014 02:30:18,819 Office365Service[2012]: 0 CarbonCore 0x901777e7 ___Gestalt_SystemVersion_block_invoke + 135
27/12/2014 02:30:18,819 Office365Service[2012]: 1 libdispatch.dylib 0x960dc130 _dispatch_client_callout + 50
27/12/2014 02:30:18,819 Office365Service[2012]: 2 libdispatch.dylib 0x960dc0b5 dispatch_once_f + 251
27/12/2014 02:30:18,819 Office365Service[2012]: 3 libdispatch.dylib 0x960dd0d8 dispatch_once + 31
27/12/2014 02:30:18,819 Office365Service[2012]: 4 CarbonCore 0x90109fb8 _Gestalt_SystemVersion + 1050
27/12/2014 02:30:18,819 Office365Service[2012]: 5 CarbonCore 0x90109b69 Gestalt + 150
27/12/2014 02:30:18,819 Office365Service[2012]: 6 Office365Service 0x000589a3 Office365Service + 358819
27/12/2014 02:30:29,794 warmd[36]: [_bootcachectl_playlist_for_file:3197] Unable to generate playlist for file: 2 No such file or directory
27/12/2014 02:30:29,794 warmd[36]: [_bootcachectl_playlist_for_file:3197] Unable to generate playlist for file: 2 No such file or directory
27/12/2014 02:30:29,797 warmd[36]: [_bootcachectl_playlist_for_file:3197] Unable to generate playlist for file: 2 No such file or directory
27/12/2014 02:30:29,797 warmd[36]: [_bootcachectl_playlist_for_file:3197] Unable to generate playlist for file: 2 No such file or directory
27/12/2014 02:30:29,797 warmd[36]: [_bootcachectl_playlist_for_file:3197] Unable to generate playlist for file: 2 No such file or directory
27/12/2014 02:30:29,799 warmd[36]: [_bootcachectl_playlist_for_file:3197] Unable to generate playlist for file: 2 No such file or directory
27/12/2014 02:30:29,801 warmd[36]: [_bootcachectl_playlist_for_file:3197] Unable to generate playlist for file: 2 No such file or directory
27/12/2014 02:30:30,870 xscertd-helper[2020]: ldap_search_ext_s returned -1 - Can't contact LDAP server when searching for bdb suffix, exiting
27/12/2014 02:30:30,883 com.apple.xpc.launchd[1]: (com.apple.xscertadmin[2020]) Service exited with abnormal code: 1
27/12/2014 02:30:30,928 coreaudiod[1249]: 2014-12-27 02:30:30.927642 AM [AirPlay] Power: SystemWillSleep
27/12/2014 02:30:30,928 coreaudiod[1249]: 2014-12-27 02:30:30.927798 AM [AirPlay] BTLE client stopping to browse for AirPlay Solo Target Presence.
27/12/2014 02:30:30,928 coreaudiod[1249]: 2014-12-27 02:30:30.928007 AM [AirPlay] BTLE discovery removing all devices
27/12/2014 02:30:30,929 coreaudiod[1249]: 2014-12-27 02:30:30.929458 AM [AirPlay] BTLE client stopped to browse for AirPlay Solo Target Presence.
27/12/2014 02:30:30,931 watchdogd[162]: [watchdog_daemon] @( pm_callback) - ref=0x0 msg_type=0xe0000280 msg=0x2a0005
27/12/2014 02:30:30,931 watchdogd[162]: [watchdog_daemon] @( wd_daemon_thread) - events buffer: 65r1069 3634s1069
27/12/2014 02:30:30,965 Office365Service[2012]: System shutdown notification
27/12/2014 02:30:31,001 WindowServer[185]: device_generate_desktop_screenshot: authw 0x0(0), shield 0x7fbf43423ed0(2001)
27/12/2014 02:30:31,044 identityservicesd[1311]: <IMMacNotificationCenterManager: 0x7ffac2c4fef0>: notification observer: com.apple.iChat notification: __CFNotification 0x7ffac2d4efa0 {name = _NSDoNotDisturbEnabledNotification}
27/12/2014 02:30:31,044 imagent[1305]: <IMMacNotificationCenterManager: 0x7fde8a42c1e0>: notification observer: com.apple.FaceTime notification: __CFNotification 0x7fde8a54a860 {name = _NSDoNotDisturbEnabledNotification}
27/12/2014 02:30:31,089 WindowServer[185]: device_generate_lock_screen_screenshot: authw 0x0(0)[inf, inf, 0, 0] shield 0x7fbf43423ed0(2001), dev [1680,1050]
27/12/2014 02:30:31,000 kernel[0]: PM response took 168 ms (1194, UserEventAgent)
27/12/2014 02:30:31,105 WindowServer[185]: device_generate_desktop_screenshot: authw 0x0(0), shield 0x7fbf43423ed0(2001)
27/12/2014 02:30:31,180 apsd[59]: Peer [pid=1203] requested push wake but lacks APSPushWakeEntitlement
27/12/2014 02:30:31,228 imagent[1305]: <IMMacNotificationCenterManager: 0x7fde8a42c1e0>: NC Disabled: NO
27/12/2014 02:30:31,228 identityservicesd[1311]: <IMMacNotificationCenterManager: 0x7ffac2c4fef0>: NC Disabled: NO
27/12/2014 02:30:31,237 imagent[1305]: <IMMacNotificationCenterManager: 0x7fde8a42c1e0>: DND Enabled: YES
27/12/2014 02:30:31,237 identityservicesd[1311]: <IMMacNotificationCenterManager: 0x7ffac2c4fef0>: DND Enabled: YES
27/12/2014 02:30:31,237 imagent[1305]: <IMMacNotificationCenterManager: 0x7fde8a42c1e0>: Updating enabled: NO (Topics: (null))
27/12/2014 02:30:31,237 identityservicesd[1311]: <IMMacNotificationCenterManager: 0x7ffac2c4fef0>: Updating enabled: NO (Topics: (null))
27/12/2014 02:30:31,237 identityservicesd[1311]: <IMMacNotificationCenterManager: 0x7ffac2e30040>: notification observer: com.apple.iChat notification: __CFNotification 0x7ffac2c43f40 {name = _NSDoNotDisturbEnabledNotification}
27/12/2014 02:30:31,244 identityservicesd[1311]: <IMMacNotificationCenterManager: 0x7ffac2e30040>: NC Disabled: NO
27/12/2014 02:30:31,249 identityservicesd[1311]: <IMMacNotificationCenterManager: 0x7ffac2e30040>: DND Enabled: YES
27/12/2014 02:30:31,249 identityservicesd[1311]: <IMMacNotificationCenterManager: 0x7ffac2e30040>: Updating enabled: NO (Topics: (null))
27/12/2014 02:30:31,000 kernel[0]: PM response took 347 ms (71, blued)
27/12/2014 02:30:49,000 kernel[0]: PM response took 3456 ms (31, powerd)
27/12/2014 02:30:49,000 kernel[0]: Failed to get hibernate image filename
27/12/2014 02:30:49,000 kernel[0]: AirPort_Brcm43xx::powerChange: System Sleep
All that is really chinese for me Do you know where i could get anything to be teached about all that
Thanks
Maybe you are looking for
-
I have a jsp page which should display a javascript message prompting the user to save the changes made on a page when he clicks on a link to another view, but only if he has changed the values in any fields in the current page. So I need to capture
-
I have a iPodtouch 4 generation and the screen is cracked can I fix it
I have a iPodtouch 4 generation and the screen is cracked can I fix it
-
How to clear the table data at the time of leaving fromt the page
Hi all, I have requirement to clear all the table data on the page. For that i have written code like public void clearRunCalcPage(){ System.out.println("Inside clearRunCalcPage"); this.getCmProcessView().executeEmptyRowSet(); this.getCmProcessFiveRe
-
Render files missing-after duplication and also after moving
I have to replace a drive, which is still working well, so i went ahead and tried to move libraries with all its content (Events,projects,reneder files), which doesnt exist as an option... as far as i was able to figure this out.... then i went ahead
-
Can I send all WBS using CJAL and Distribution Model
Greetings, I have setup the disribution model to send WBS between two systems as following: Object name WorkBreakdownStruct Method name SaveReplica Object type BUS2054 Method SAVEREPLICA Description R