Mac Mini not displaying on two screens - was fine, but now it is not!

Hello,
At my work we have a Mac Mini running Keynote with videos and various slides looping round, displaying on a LG 42" LCD screen in our display window. On the other side of the window - the bit the public does not see - is a monitor to start the presentations and run the computer.
This was working fine, running both screens simultaneously. However recently, it had to be turned off to carry out some work in the display area, and a few days later upon setting it up again its not working with both screens.
The mini boots up and will run fine @ 1024 x 768 60hz on the inside monitor. This is connected to the mini DVI port, with a DVI to VGA adapter. However, when I plug in the LG 42" LCD at the same time (Connected via the mini display port, to an HDMI connector/adapter, the monitor will change to display an "out of range" message, while the LG will display as normal.
I really need both screens running simultaneously as they were before! Nothing has changed in the setup and both screens will run fine by themselves, so I know that they are functioning correctly.
Any suggestions are much appreciated!
Any thoughts

It sounds like perhaps the displays got set to mirror mode somehow. This means both displays are trying to display the same thing instead of working independently as you want them to.
Which screen is set to primary, e.g. which one shows the menu bar when both are active? Are you able to get into Displays preferences and make changes? If so, I would check the mirror setting.
Something else that may be worth trying is to start the mini in Safe mode with both displays connected. Hopefully the result will be useable screens on both displays. If so, go into Displays preferences and set the respective displays to the desired setting and restart normally. The selections made under Safe mode should persist through a normal restart.
http://support.apple.com/kb/HT1455

Similar Messages

  • Apple recently made me change my password which was fine but now it keeps telling me the security code on my visa is incorrect now matter how many times i  re-enter it.  I can no longer download or update my phone.  Please help!!!!

    Apple recently made me change my password which was fine but now it keeps telling me the security code on my visa is incorrect now matter how many times i  re-enter it.  I can no longer download or update my phone.  Please help!!!!

    Did you go on-line and fix your billing information? You probably need to do this from iTunes on your computer, not your phone.
    If you've double checked your credit card info and it still won't take it, contact your card issuer.

  • I have elements 9 and just a day ago everything was fine but now all of a sudden any time I try to convert or save my project or even burn it to a DVD the program shuts down on me.

    I have elements 9 and just a day ago everything was fine but now all of a sudden any time I try to convert or save my project or even burn it to a DVD the program shuts down on me.

    connermac8
    Is the crash/shutdown for this one specific project or does it occur in new projects as well?
    On what computer operating system are you running Premiere Elements 9 and are you running Premiere Elements as the 9.0.1 Update?
    In cases such as these, the first factor to rule in or out are the preferences/setting file. Here you want to delete the Adobe Premiere Elements Prefs file.
    The directions to its location will vary with the operating system. So the operating system information is important to post. Some of the many factors
    that we need to evaluate
    a. does the problem exist with and without antivirus and firewall(s) disabled.
    b. are you using a pen and tablet device instead of a mouse.
    c. does your computer need a clean up/clear out - is your computer optimized
    Your answers to the questions above will help us to customize and plan appropriate troubleshooting strategy. So, let us start with the above and then decide what next.
    Thank you.
    ATR

  • My Iphone won't synch with the itunes 11, I always got the message that said to record my pc to the itunes but when I try it to record it that said its already recorded... What I need to do last month everithing was fine but now I can't do anything

    My Iphone won't synch with the itunes 11, I always got the message that said to record my pc to the itunes but when I try it to record it that said its already recorded... What I need to do last month everithing was fine but now I can't do anything

    I a;ready take off the acces of the computer and reput it

  • Hi morning anyway I found difficult too download I dont why before its was fine but now it's take longtime can you help me please txs

    Hi morning mark can you help me please I can't download the game before was fine but now I can't and take long time please can you help me please txs

    The figures you mention only make sense on your intranet.  Are you still using the same wireless router.  The verizon one is somewhat limited as far as max wireless-n performace.  For one thing it only has a 2.4 radio.   I like many people who wanted wireless-n performance before they even added a wireless-n gigabit router, have my own handling my wireless-n network.

  • Why isn't the iMessage working on my phone? Up until 1:45pm today it was fine, but now it isn't working.

    Why isn't the iMessage on my iPhone 4s working? Up until about 1:45PM today it was working just fine but now it sends it as a text message. I have tried everything in the setting but it still is not working. Any tips would be great! Thanks!

    It should be back up now, they had a system outage. Reset your iPhone.

  • Mac Mini / 23" Display / 10.5 - Screen resolution splits in half

    Hey All,
    I'm using a Mac Mini with a 23" aluminum display.
    Recently installed Leopard on it, and now I'm having a really funny issue:
    When I try and restore a window that has been minimized to the dock, the window does restore as its supposed to, and then for a split second, the display seems to swap the left and right side of my display. It almost looks like the image slides to the side 50%. So the pieces of my screen that were at the edges of the display, temporarily meet in the middle.
    It then switches immediately back.
    I think this might happen at other times too, but its 100% reproducible when restoring a minimized window.
    Any thoughts?
    Best,
    Robert

    I reported the same problem in another thread before.
    I also have a G4 Mini, and I also have this exact same issue with a 3rd party (Dell 24") screen. It's not related to the screen or output (happens with the DVI and analog connection) but probably a memory issue with the video chip (out of memory maybe?)
    It seems to happen only at the highest resolutions (I run 1920x1200, and have also seen it happen at 1920x1080). 1680x1050 and smaller works fine.
    I hope it's a bug that can be fixed, since Tiger had no problems at all.

  • My mac mini hard drive crashed. I replaced it but now not all applications work. How do I fix this?

    When my mac mini (late 2009) hard drive crashed I installed a new one. During the process I used migration assistant to bring in my time machine backup. When finished I did not have all applications...iPhoto, CC Cleaner, Chrome, and most importantly Reunion all failed to load. I have since manuay fixed Chrome and CC Cleaner but still do not have Renion or the OSX iPhoto and other apple OSX applications working. Can someone help or driect me to the right forum?

    Restore failed to provide all the applications and data. Took the mini to Apple genius today. They reinstalled OSX (same as I had done) then confirmed that the applications were not backed up to time machine...they will be in the future. After reloading each individual application they now work as expected and all the data seems to have been restored. Except the Reunion files which were near and dear. These are gone forever. Somehow, perhaps through my negligence, the 'GED' files were not stored in a "Reunion" folder and were not backed up...much like the apps. Now I'm trying to recover the files from the crashed drive.

  • My iPad mini won't charge at all. I got it for Chrisrmas and it is still in brand new condition and it was fine but now it won't charge at all! It used to charge in an exact position but now it has stopped altogether...Help!!

    My iPad mini won't charge at all. I got it for Christmas off my dad and it is still in brand new condition. Until the other day it has been working fine but until yesterday or the day before my charger went all funny. In order to charge my iPad mini you had to put the charger in an exact place and if someone so much as touched it it would stop charging because it wasn't in its exact position. But today I tried to charge it again and I tried getting it in the same spot as yesterday but it is not working at all. I have only ever charged my iPad mini in the wall but I have seen posts about people charging it in the USB in an computer. So I thought I would also try that but that hasn't worked either and now my iPad mini won't charge in a plug or USB and I live really far away from an apple store and I can't get a new charger also because I live far away from the store. So what shall I do?

    When and where was the iPad/charger purchased? It's covered by a 1-year warranty.
    The problem may be the USB cable.
     Cheers, Tom

  • Sound was fine but now distorted (sounds overdriven and clipped) on g7-1075dx

    Sound suddenly is distorted; sounds like a preamp overdriving a power amp. Pavilion g7-1075dx with ATI High Def audio, IDT High Def CODEC, Windows 7 Home. Same at any level on available volume controls.

    the same thing is hapening to be only had my laptop for a month. I plugged in speakers and it was fine, when i took the speakers out the sound is now distored and static from time to time, also one speaker is louder then the other, dont know if thats suppose to be like that.

  • The volume on my iPod was fine, but now it's too loud and I don't know how to turn it down.

    The volume on my iPod was just fine, but somehow it got turned up too loud, and I don't know how to turn it down.

    Hi Virginia1945,
    Thanks for visiting Apple Support Communities.
    Depending on which iPod nano model you have, you can adjust the volume with the button on the side, the top, or using the click wheel. You may also be able to set a maximum volume, so it doesn't get turned up too loud in the future.
    You can find the user guides for your iPod nano at this link:
    Manuals - iPod nano
    http://support.apple.com/manuals/#ipodnano
    Best Regards,
    Jeremy

  • Mac Pro was fine but now it has no Wi-Fi configured?

    I Must have accidentally turned my Wi-Fi card off the symbol for it at the top of the display is gray and has an x in the middle. How do I turn it back on?

    Go to System Report and see if the wifi hardware is listed under the Hardware section
    Try resetting the SMC and PRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
    About NVRAM and PRAM
    Try reseating the wifi card

  • HT5052 Why does my computer not download ios5 completely and says it has timed out and could not download? Why can I not get my ipad to wifi it was fine but now all my emails have disappeared and also I cannot connect to wifi?

    Why cannot I connect my Ipad again to Wifi and why has all my emails and contacts been deleted?
    Why can I not download ios5 and my computer says it has run out of time?

    Some problems occurs when your Internet security program was set
    to trust the previous version of Firefox, but no longer recognizes your
    updated version as trusted. Now how to fix the problem: To allow
    Firefox to connect to the Internet again;
    * Make sure your Internet security software is up-to-date (i.e. you are running the latest version)
    * Remove Firefox from your program's list of trusted or recognized programs, then add it back. For detailed instructions, see
    '''[https://support.mozilla.org/en-US/kb/configure-firewalls-so-firefox-can-access-internet Configure firewalls so that Firefox can access the Internet.]''' {web link}

  • I have a G5 Dual 2.3GHZ 10.4.10 running Logic Pro with various AU plugs. Battery 3 was fine but now doesn't work. I tried everything already posted, but this is the msg: FATAL ERROR: OpenAComponent: result: -1,0xFFFFFFFF

    I did do an upgrade since the G5 had been out in a studio for some time, away from internet. This may have efected it...? Battery is still on the hard drive and all components. I says that it cannot find the Installer... and refuses to read it from the disk. I'm struggling here folks. Would really appreciate some help if anyone knows more.
    Here is a the full message it gives:
    VALIDATING AUDIO UNIT: 'aumu' - 'NBa3' - '-NI-'
    Manufacturer String: Native Instruments
    AudioUnit name: Battery 3
    Component Info: Native Instruments Battery 3
    Component Version: 3.0.0 (0x30000)
    Component's Bundle Version: 0.0.0
    * * PASS
    TESTING OPEN TIMES:
    COLD:
    Debugger() was called!
    Debugger() was called!
    FATAL ERROR: OpenAComponent: result: -1,0xFFFFFFFF
    validation result: couldn't be opened
    updating properties of AU Battery 3 by Native Instruments...FAILED!

    Sorry, I'm also using QT Pro 7.1.6.
    Lloyd

  • I have an apple 2 for about 3 months and everything was working fine but now I can't access safari what can I do

    I have an apple2 for about 3 months and everything was fine,but now when I try to access safari it doesn't open what can I do

    Have you tried a "hard reset"? If so, I would take the phone to an Apple store. If not,
    1. Make sure the phone is OFF
    2. Hold the HOME button and then press the power button and HOLD IT.
    3. Hold both buttons until the phone comes ON, goes OFF and come ON again (about 45 seconds)
    4. Re-sync with iTunes.
    Hope this helps.

Maybe you are looking for

  • Populating Customized fields in Sales Order Creation using BAPI

    Hi All, I have a requirement that, I need to populate 2 customized fields which are appedned in the VBAK tables through Append structure. I am using BAPI_SALESORDER_CREATEFROMDAT2 FM for creating it. Could anybody tell me how to send these 2 coustomi

  • Exporting to a PDF with facing pages

    Please help, I have encounter a problem with InDesign CS4, which I didn't have with CS3 version. When I export an InDesign document with facing pages into a PDF, it turns it into a PDF document with consecutive pages (spreads are broken into individu

  • Help in java program.i cnt solve the need of this question.question inside.

    Create a class named Employee. Includes data members for Employee class : Data member     = Data type Employee id     = String Employee name     = String Icno     = String Gender     = Char Date of birth     = String Address     = String Commencing D

  • Use a High Pass Filter for multiple connections

    Hello, you can check this site: http://www.cableboxfilters.com You can find the best filter and these are newly designed and is a super mini size high pass filters. They have excellent specifications, dimensions of only 13mm x 40.5mm and a weight of

  • Album art sync and disp

    For any one who has tried absolutely everything to get the album art?on their zen vision m and have it fail. I feel for you. If this is you, consider using a program called media monkey. It doesn't matter what size the pics are and it syncs them stra