Mac Mini will not boot after Security Update 2008-007

Hello,
A G4 Mac Mini machine I was asked to take a look at will not boot after the owner (succesfully) installed Security Update 2008-007 from Software Update. Booting always hangs at the blue screen after the Apple logo, and booting in verbose mode reveals that WindowServer is crashing repeatedly. Permissions and filesystems have been repaired, PRAM reset, etc. Safe boot also exhibits the same problem, but it is possible to boot to single user mode. Hardware checks out fine with diagnostic utilities.
Any suggestions on how to fix this? Unfortunately, backups are not available (it's not my machine =).

Hi Arkku , and a warm welcome to the forums!
I'd certainly give Sig's advice a try first.
If that should fail...
applesetupdone...
This was Posted by: JoseAranda at September 9, 2006 3:48 AM
"OK, restart your computer, hold down Command-s and type in the following:
/sbin/fsck -fy Enter
/sbin/mount -uaw Enter
rm /var/db/.applesetupdone Enter
# The rm command is the remove command which deletes the file.
# Robert: I'd rename the file via: mv /var/db/.applesetupdone /var/db/.applesetupdone.old
reboot Enter
Once you've done that the computer reboots and it's like the first time you used the machine. Your old accounts are all safe. From there you just change all other account passwords in the account preferences!!
end of posted by: JoseAranda"
Reset OS X Password Without an OS X CD...
http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/

Similar Messages

HELP Mac Mini will not boot after 10.5.1 update

After I tried installing 10.5.1 I received a warning message that the update will not be installed because of an error and I should contact the vendor. After that the Mini tries to reboot. It keeps repeating the process over and over. I have tried to do safe boot mode by manually turning off the computer and then restarting while holding shift, but nothing happens. Can anybody help?

BBlades wrote:
I think the problem might be with the external HDD I am running with this machine. I am reinstalling everything now from my time machine backup. I just added this hard drive the other night and it is loud as all **** and I believe it is why my machine has crashed. Before I added the drive, my system was running pretty good. It is a Calvary 160gb drive. I think I am going to have to send this POS back to newegg and get myself another Lacie drive, because my other Lacie is running smoothly.
I'd go with the LaCie. I got two from Amazon, 320 and 500 and both are quiet, have 800MHz FW and I have had no problems with either of them. The new one also has a 3-position switch - Off/Auto/On which allows it to sleep when not being accessed when in Auto.
I suspect that your external HD was the problem all along.

Mac Mini will not load after recent update.

My late 2012 model Mac Mini just had a software update and upon rebooting, my login name did not populate. I rebooted again and now I get the gray screen with spinner and progress bar. Once the progress bar loads I have just the spinner for a minute or so before it cuts off completely. I use a wireless MAC keyboard and it will not load into safe mode when I try holding down SHIFT upon reboot. Any suggestions?

Try Safe Mode with a wired KB
Use a PC KB if necessary
http://support.microsoft.com/kb/970299
Boot to recovery
OS X: About OS X Recovery
and try repairing the startup disk
Next reinstall the OS

Mac Mini will not boot after getting SBOD

Hi,
I was having problems with my Mac Mini being really slow to respond last night. I kept getting the SBOD every time I tried to move between applications or even between sites in Safari. It took an age to log on, sitting on the 'checking password' screen for minutes at a time every time I woke if from sleep/screensaver.
In the end I shut everything down this morning and tried a restart - however I ended up having to leave it before it had started up and go to work. Returning tonight it was still stuck on the grey screen with the wheel.
I tried both a couple of suggestions I found on a 'freezing after upgrading to 10.6..' thread - one was to reset the SMC, the other was to rest the PVRAM (or something like that - it involved holding down command-option-P-R) at start up. Both were unsuccessful - it's still sat here with the grey screen & the spinning wheel.
Any suggestions on what to do next? I've assumed that I'm on the latest version of Snow Leopard as I always tend to install the latest updates - but I can't be sure ... and obviously I have no way of checking!
HELP!

I tried the Disk Utility, which was unable to repair the problems. It then got worse, after not finding anyway to shut down (the only options I had were restart or start up disk) I just switched it off. Completely forgetting that this wouldn't eject the DVD! I then tried starting up again with the install DVD in an effort to try and find a way to eject the DVD, but now it just gives me a grey screen, no Apple logo, no gear wheel.
I now have an appointment with the Genius Bar today.

Brand new Mac Mini will not boot after 10.6.6 Update

Problem is exactly as described here: http://forums.macresource.com/read.php?1,1069909,1070656
The 1st restart was fine then it restarted for the 2nd time & it got to the gray screen with Apple logo & spinner. It sat there much longer than it ever had before then the Apple changed to a circle with a slash.
I tried booting into single user mode and it is hanging "waiting for root device"

Sounds like maybe your disk died.
I suggest that you boot from the install DVD that came with your Mac and run AHT to check it out.
Allan

MAC Mini does not restart after Yosemite update

I bought my MAC mini in 2011 and I successfully updated to Mavericks with no problems. I am not sure why my MAC Mini will not restart after I updated to Yosemite. The completion bar gets stuck around 30%.
Any help or ideas appreciated
Larry

Okay, this is strange. I tried restarting three times yesterday with the same results. In fact I left it go overnight only to find the next morning that the bar was still stuck at 30%. I did a hard boot a little bit ago and waited a few seconds. I restarted an it booted up fine.
Larry

Hello, mac mini will not boot. I get a file symbol with a question mark, then a white screen, Hello, mac mini will not boot. I get a file symbol with a question mark, then a white screen

Hello, My mac mini will not boot. When I turn it on, I get the chime, then the white screen, then the apple symbol, then a file symbol with a question mark, then the white screen and then it stays like that.
Is this a bad hard drive?

Sounds like it. Try booting from your OSX restore DVDs - startup and hold down "C". This will take AGES! Then run Disk Utility from the menu.
The flashing ? means your system is corrupt, dead, not there, on a dying HD, etc...

Mac Mini will not boot OS, can I get to files with another Mac?

My mac mini will not boot the OS proserly, it goes to a screen that tells me that some root folder can not be found.
The install CD works and I can boot to it. The disk utility reports no problems, all disk repairs done and OK.
The computer still will not boot to the OS.
How can I get the files I need off the drive before I reinstall the OS?
I have other Macs and fire wire cables, cross over cables, regular eithernet cables. What can I do?
Thanks!

How can I get the files I need off the drive before I reinstall the OS?
Connect it to another Mac with a FireWire cable and start it up with the T key held down.
(40535)

My mac mini does not boot, after backing the enire system onto an external drive with Carbon Copy Clone

My Mac Mini does not boot, after backing the enire system onto an external drive with Carbon Copy Clone. I had switched the start-up disk back to the original of course. Now all I see is the Apple logo. What should I do? Thanks in advance.

Try disconnecting any external devices, especially hard drives
and try rebooting.
If that doesn't help, then :
If you are running Lion, boot to the Recovery HD and run a
Repair Disk on the OSX partition.
If Snow Leopard, boot to the installl DVD and run Repair Disk.
Also, you may want to bookmark this:
http://reviews.cnet.com/8301-13727_7-57345273-263/troubleshooting-the-boot-proce ss-for-intel-macs/?tag=txt;title
for future reference. It is a pretty good explanation of the
Mac boot process and how to identify where problems may be.

MacBook Pro will not boot after software update

MacBook Pro will not boot after doing an Apple Software Update (of course they will not help you). MONEY, MONEY, MONEY is the name of the game. They can cause your computer to crash and still charge you!
Does anyone have an answer to why my computer is showing a little gear spinning for hours? I have tried several things with NO luck.
Thanks-

Run through the list of fixes here
Step by Step to fix your Mac

HP Pavilion 15-n268sa will not boot after windows update (windows 8.1)

After a series of windows update (windows 8.1) my HP Pavilion 15-n268sa will not boot up, no fan noises, no lights no nothing.
I have tried a "hard reset" a number of times with no success.
When the battery is present the white LED flashes 3 times when the power button is pressed.
Please please help.

Hello Cuffy,
Welcome to the HP Forums!
I understand you notebook will not boot after a series of Windows updates.
Can you tell me if you are able to access the HP Recovery Manager by repeatedly tapping the F11 key while the notebook turns on? If you can access this, try doing a system restore to before you installed the updates. If not I would suggest you go through this document: Computer Does Not Start and the LEDs Blink or the Computer Beeps.
If it's the Caps Lock light that is blinking this document will tell you exactly what the error is (spoiler: 3 beeps is a memory failure). This could also explain the failed updates. The updates are stored in the RAM before being applied to the operating system.
You can try reseating the RAM, or using only 1 of the RAM cards, as you have 2x4GB cards. If it still doesn't work with 1 card, try the other card to confirm it has failed.
You can replace defective cards via HP Phone Support if covered under warranty or at the HP Part Store if not covered. You can contact HP Technical Support at 1-800-474-6836 in North America. For all other regions click here.
Hopefully this information helps!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Help - Mac Mini does not boot after re-install of OS X

Hi,
I have a Mac Book Pro and Mac Mini. I needed to reinstall my Mac Mini but lost the install disks. The install disks of the Macbook do not work (machine specific). So what I did was boot the Mac Mini in firewire target mode and installed OS X to it from the Macbook. Worked ok. Except for one thing: The Mac mini does not boot the fresh OS X installation. I get a blinking folder icon with a question mark on top of it.
I booted from the Mac OS X install disk, repaired disk permissions etc. and tried to use the "Startup Disk" utility to select the hard drive as a boot device. But that utility does not offer me to select the hard disk, it doesn't even show up (while DiskUtility can perfectly see it).
Any hints for me? I am pretty much stuck right now.
Thanks

Well, see, the fact that it wouldn't let you boot from the MacBook install disks should have been your first clue to not try to do it. There's a reason it wouldn't let you. The MacBook install disks contain a version of the OS specific to the MacBook, in order to prevent people doing what you just tried to do (ie, installing the same copy of the OS on multiple machines).
If you don't have the Mac Mini system disks any more, you'll have to go buy a copy of OS X. You could also ask for help from an Apple Store, if there's one in your area, but I honestly don't know if they would give you new disks. I would think they should (for a small fee), since Mac Mini system disks would be useless to anyone who didn't already own a Mac Mini, but you never know.

Mac-mini will not boot up.

After downloading the latest OSX version for my mac-mini model A1283, it attempted to automatically re-start and stopped with a graphic on the screen and no control of the cursor. It will not boot up. No screen at all. Keyboard SHIFT key light does not go on. The power button will start and stop, but no tones or screen. Has worked fine for 2 years after upgrading hard drive running both OSX and Windows 8. Is this a memory or logic board problem?

Troubleshooting: My computer won't turn on

Mac Mini will not boot up at all

Mac Mini 1.5Ghz Intel Solo, will not boot up now. It first froze when playing a song in iTunes. I shut down "the hard way." Now it can't make it past the gray boot screen. It's not even responding to any keyboard commands on boot. I can't get into Safe Mode, Boot from Recovery Disc or Single user.
HELP!!!!

If you have the original Apple Aluminum usb keyboard, the startup modifier keys won't work with your Mini. But just about any other wired usb keyboard should work.
If you use a PC usb keyboard, Alt maps to Option and the Win key maps to the CMD (Apple) key.
If you just want to boot from the install or recovery disk, then the Apple remote can be used: holding down the remote's Menu button at startup works the same as holding down the Option Key, namely, it gives you the choice of what disk/disc to boot from.

Satellite Pro L300 will not boot after Bios update

Help please.
I have just formated a Satellite Pro L300 laptop.
I used all the updated drivers from Toshiba and all went very well.
I then updated the bios with the latest version.
After doing this the laptop will not boot but just keeps scrolling through the start menu and no matter what option I choose it just keeps doing the same thing.
Any ides welcome

Hi
I used the Microsoft installation disk but just keep getting to the same stage until the blue screen appears. I have tried different installation disks and also changed the hard drives as well. I can do everything in bios, change boot device enable or disable devices but that is it. I have tried a few times to instal windows but it just stops at the same point saying windows is stopping instal to protect the system. I fear the bios update has done some permanent damage as I cant get past the dreaded blue screen.Thanks anyway

Mac Mini will not boot after Security Update 2008-007

Similar Messages

Maybe you are looking for