Mac mini with laptop PC

Hey!
Have tried to find answers on this with google, but have not find an satisfying answer, so I hope you guys can help me. I have a laptop PC with no external keyboard, mouse and monitor. I really want to start making iOS apps using xcode and was then thinking of buying a mac mini and then using my laptop as the keyboard, mouse and monitor. So my questions are:
1. What is the simplest way to do this. Using WLAN or Internet with logmein or similar program maybe? If so, how?
2. Is this a good solution considering a low economy or is there another solution?

hi there - been following this with interest as I'm trying to control my mac mini (snow leopard) from my PC laptop running windows 7.  Can you let me know where to enter the vcn:// details on my laptop?  Do I need to download additional software on my pc laptop?  If so what would you recommend?
Many thanks for any advice you can offer.
all the best,
Matt

Similar Messages

  • Mac mini with a 24" display or a new iMac 24"?

    Hi,
    Since Apple releases the new iMac, and at the same time, updated the mini, I'm wandering where my heart should go.
    I like the iMac, a little bit more powerful, better video card and not sharing memory with main memory, better BTO (bigger HD, faster HD too, memory, etc) iSight and mike, and so on so on. I have not seen one yet, but I'm still puzzled by the glossy screen. Many article I read said that it is a like or not based on personal taste and environment you put it in. I bought a Sony display 2-3 years ago, which I returned, because of the glossy screen. The images were very clean and very fun too work on, but I could not endure to see my face in the screen continuously. That's what I'm afraid about the new iMac.
    So far so good, I read the article on http://www.macworld.com that compare the new mini C2D with an iMac, and while it is less performant it is still a good performer. Only a few points below the iMac. So...
    Choosing a mini with a 24" of my choice with the same resolution as the iMac will cost me around the same (maybe a few hundred $ less), but I'll have a smaller/slower HD and not a dedicated video card. I'm wandering if the larger screen resolution will affect the mini performance? Sure, for the HD space, I can use an external HD on firewire. Maybe even boot from it and use the internal and slower disk for backups (like TimeMachine for instance).
    I do not play game, or very occasionally, I'm doing iLife/iWork stuff, and Internet surfing. I want the larger screen, as I like to have spaces to play with, but I'm afraid the mini will suffer the higher resolution.
    In the long run, the display will stay mine, when I ever decide to change my computer, while buying the iMac mean I'll drop the display and buy a new one. There's pros and cons to all of this...
    So I'd like to heard from people having the new (or even older) mini to let me your impression of what you feel about this.
    Thanks in advance.

    If you are not able to actually examine an iMac carefully before you buy, the risk that the glossy screen may not suit you is a real issue which has to be considered. Imagine that you bought one and found it to have the same problem as the Sony display you tried and had to return?
    Ultimately, the actual performance of the system is remarkably unimportant in most situations. The majority of users and uses would not show markedly different operability between a brand new Mac Pro and older G5, even though in terms of specification and benchmarking, the two are like chalk and cheese. The fact is that while the Mac Pro would be greatly faster, OS and software, not to mention the user him or herself, are all quite inefficient.
    What that means is that the difference in performance between the iMac and the mini is certainly measurable, and in use would show itself in some ways (the iMac would run smoother for example) but without the ability to sit them side by side, as a user you'd really never know. Bearing in mind that the new minis are way faster than the old G5s which were themselves screamingly fast when they were in production (and still are), it's hard to imagine that a mini would fail to impress.
    And since the actual performance of the system isn't all that crucial, what IS vital is to ensure that the system you buy is usable. The devices that matter most in that respect are the bits you, as the user, interface with. Keyboards and mice are reasonably cheap and easy to change, but displays are not when they are fixed and integral to the system.
    The downside of the mini is twofold: Firstly that the internal drive is 5400rpm, thus relatively slow. In reality this really doesn't matter all that much, particularly not if you go for 2Gb RAM. It's been criticized for it's speed, but on the other hand, it's the same as the best laptops, users of which don't seem to have problems with the drive speed. It can be got around of course with a fast external drive, used to boot the system.
    Secondly, the integrated graphics - not because that's really limiting in any absolute sense (except for gamers) but because as time goes by, more and more of the top-end software is likely to exclude systems with integrated graphics from their minimum specification list. There aren't many like that yet, and it's hardly likely to be a widespread problem, but it does mean you have to consider what software you want to run as part of the equation.
    If I were in your situation, I'd not consider spending money until I had looked at the iMac and given myself some time to work with one. The fact it has a glossy screen doesn't mean it WILL have the same problem as the Sony display had, and slight changes in the ergonomics of your desk with the iMac on it rather than the system with the Sony display previously may mean that even if it did prove reflective, it may be far less of a problem (or more of course). I would look to buy the best system with the best specification that fit within my budget (after all, it has to meet your needs for some time, even as they change), thus if the iMac screen was good, that would be the system I'd go for. If there were any sense that the reflective properties of the screen were going to be a problem, I'd dismiss it as an option immediately, and focus on either the lowest cost Mac Pro if one of those were within the budget, and if not, a Mac mini with bumped up RAM and your choice of screen.

  • I've got a late 2009 mac mini with a 320gb hard drive and I want to upgrade it to a 1tb drive or bigger. What HDDs are compatible with my mini?

    I've got a late 2009 mac mini with a 320gb hard drive and I want to upgrade it to a 1tb drive or bigger. What HDDs are compatible with my mini?
    Because of the price I'm not interested in solid state drives, unless of course you want to send me $1,000.
    I've already got external drives but I take my mini back and forth to work and don't want to carry those drives with me.
    I'm not interested in buying a laptop. My mini works great so why waste $1,000 or more when I can buy a 1 to 3 TB hdd for under $300 and have exactly what I want. My late 2009 Mac Mini with a large hdd.
    I went to Crucial's website and they can't tell me what drives fit my Mac Mini. That's where I got my ram (8GB). I'm ONLY interested in name brand quality HDDs.

    The limiting factor in your 2009 mini is the max 9.5mm drive thickness.
    One of the largest capacity 2.5" drives that meets this criteria is the HGST (formerly Hitachi) at 1.5GB
    Any reputable SATA HDD you can find that is not thicker then this 9.5mm will work.

  • Connecting mac mini with windows

    I am trying to connect my mac mini with a windows laptop, to share a printer and some files. My mac mini works fine with my macbook, but when I try to connect to the laptop, or viceversa, I can get it to work. I am ussing the mini a the server so I want the laptop to share the printer, but I can find a way to make it work. How do I make my mini to recognize the windows laptop? I tried connecting both directly with a ethernet cable, but nothing. I will like them to work throgh my wireless network, but I do not know how. HELP!!!

    Firstly, confirm both the Mac mini and the Windows laptop are in the same Windows Workgroup. The Windows Workgroup is set using the Directory Access utility (Applications > Utilities) under SMB/CIFS. Also, make sure Windows File Sharing is turned on and your Firewall is set correctly.

  • Will Mac Mini with OSX Server 10.6 Snow Leopard be able to fit my needs?

    Hello,
    The office i work in is a Mac environment.
    Is this unit powerful enough to support 20 people? This is the setup i was thinking:
    Mac mini with Snow Leopard Server - 2.66GHz : Dual 500GB:
    1st Internal drive - OS only
    2nd Internal drive - OS backup via CarbonCopyCloner
    Ministack USB drive - Data backup via Time Machine (file shares etc on server from services)
    Firewire DroboPro 16TB - Client Time Machine Backups via the Network.
    Would the Mac Mini be powerfull enough to support normal OS X Server services, and at the same time act as a client Time-Machine backup via the network?
    Thanks,
    -Mike

    The answer to your question depends on how many of the services you intend to offer.
    If you are just going to use the Mini as a File, Print, and directory server, then it will work fine.
    If you intend it to run as your web, email, database, and iChat server, you might be pushing things a bit much.
    Your drive layout looks appropriate for a simple file server, so I would tentatively say yes, it looks like it would do what you currently require.
    G. Discenza

  • Mac Mini with OSX server still OK?

    HI All,
    I was going to purchase the mac mini that was geared up to work best with OSX server however that option is now no longer available and the mac mini's have downgraded slightly in terms of quadcore processors and 2tb harddrives.
    We run a small design studio, file sharing is becoming a large hinderance on workflow and I thought OSX server sounded like a good solution for someone with little knowledge of the area. We have four imacs, and three macbooks. Our team is growing fairly quick and that number should double next year.
    Any ideas would be much appreciated.
    Thanks,

    Just get the latest mac mini, add some external storage with a Thunderbolt 2 connection and that setup will work great for filesharing.
    You will get gigabit network speeds and since it's Thunderbolt 2 the mac mini will have no problem to serve those files across the network.
    Make sure you get external storage with a decent RAID setup like a Promise Pegasus for instance, and invest in a good back-up solution.
    Then clone your mac mini OSX Server setup daily towards the RAID and you're good to go!
    Get a Mac Mini with an SSD or Fusion Drive and 16GB of RAM. That'll keep you going for the next couple of years easy!
    Goodluck!
    Jeffrey

  • How to connect an external HD to a 2007 Mac Mini with FireWire

    I have a 2007 Mac Mini with a 1.83 GHz Intel Core Duo processor, 1 GB of RAM, and an 80 GB HD. I recently migrated to Snow Leopard (OS X 10.6.5) from Tiger (OS X 10.4.11). I purchased a 500 GB external HD from Seagate which I want to use to back up both my wife's notebook PC and my Apple. My Mac Mini has a Firewire 400 (6-pin) female connector on the back. The external HD can connect to a Mac via a Firewire 800 male 9-pin connector. How do I connect the male FW 800 9-pin to the female FW 400 6-pin port? This may sound obvious, but the solution is more challenging than I imagined. The 9- to 6-pin adaptors I've seen online combine a female 6-pin end with a male 9-pin end. I need the reverse of that (female 9-pin FW 800 to male 6-pin FW 400 adaptor)! I bought a 9- to 6-pin cable this week, but ended up with two male 9-pin plug ends, and no way to connect them. Is a solution available using FW, or should I bail and go with a USB 2.0 connection instead?

    Most external firewire drives have removable cables that plug into "female" ports on the hard drive. Is the firewire cabling on your external drive different from this? (What is the model number of the external drive?)
    If the cable is removeable, simply buy a 6-pin-to-9-pin firewire cable (male on both ends).
    monoprice.com is a good place to find these cheaply and in the length you need.

  • Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini

    Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini (late2014)
    im currently useing my Mac mini as a portable computer, I take it to the university and use the iMacs there as a monitor but before I can do that I have to log in to my Mac mini first which means doing it blind
    is there a way to put the IMacs into display mode with out logging into my Mac mini first
    or is there a portable monitor that I can use that will not require me to login first

    This
    Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support
    says:
    How do I enable TDM?
    Make sure both computers are turned on and awake. 
    Connect a male-to-male Mini DisplayPort or ThunderBolt cable to each computer.
    Press Command-F2 on the keyboard of the iMac being used as a display to enable TDM.
    Note: In Keyboard System Preferences, if the checkbox is enabled for "Use all F1, F2, etc. keys as standard functions keys," the key combination changes to Command-Fn-F2.
    How do I exit TDM?
    To leave TDM, press Command-F2 on the keyboard of the iMac that is in TDM. You can also exit TDM if you shutdown or sleep either computer or detach the cable.
    Can I use a third-party keyboard or older Apple keyboard to enable TDM?
    Some older Apple keyboards and keyboards not made by Apple may not allow Command-F2 to toggle display modes. You should use an aluminum wired or wireless Apple keyboard to toggle TDM on and

  • Is there a way to run Internet Explorer on a Mac mini with mountain lion?

    I need to access a professional website that only works with IE (don't get me started on THAT) I need to do billing using this site so need to have full functionality.  Is there a way to run IE on my mac mini with mountain lion?

    The key takeaway here is that yes, you can access Windows 7 (and IE 9) from OS X Mountain Lion.
    The crucial question is about your workflow. If you need concurrent access to both Windows 7 and Mountain Lion, then the Bootcamp solution included with Mountain Lion would not be the right choice. You would need one of the virtualization solutions.
    If you need helpdesk support from a paid product, rather than entirely from a community forum, then the latest Parallel's Desktop or VMware would be a matter of choice, with Parallel's the better decision at this point. Either of these products are under $100, in addition to the cost of a Windows 7 license. You may need the Windows 7 installation media as an .ISO file, rather than on DVD. Check requirements.
    By example, I use Oracle's VirtualBox (free) on Mountain Lion, with a Windows 7 Home Premium 64-bit guest. The interactive and network performance of this Windows guest are more than adequate on my 2011 mini. I assigned 3 GB memory and 2 of 4 processor threads to the Windows 7 guest. I also restricted guest CPU use to 80%. VirtualBox is installed on my SSD, but the Windows guest is on an external HDD. That is not a default configuration. There are multiple choices for display; from full-screen 1920x1200 (mine) to an isolated resizeable window, to seamless integration with OS X. The Apple keyboard, bluetooth devices (trackpad/mouse), and printer all are recognized. I also have a shared OS X folder with VirtualBox, and copy/paste integration.
    I use VirtualBox as it meets my support (forum) and functional requirements.
    Best wishes,

  • How do I set up my Time Machine and Mac Mini with Lion Server so i have one wifi loop in the house?

    HELP!
    So I have had a Time Machine wifi loop at the house for approx. 6 years. I run two Macbooks, 2 iPhones, 2 iTouch and a Samsung Smart Blueray on the loop.
    I just bought a Mac Mini with Lion Server. When setting it up I'm not sure what or how I managed to do, but I now have 2 wifi loops, one doesn't lock and niether will support the Samsung BlueRay. Also, each time I want to go online with one of the other Mac devices i have to relog into the wifi loop.
    Can someone please walk me through the fix. The mac Mini is plugged straight into the Time Machine to recevie its internet connection.
    Thanks!
    John

    You often see this limit of 10 clients in wireless hotspots but I have yet to see it in an adsl modem.. most strange way to pay for a service that is really irrelevant how many clients you use.
    Have a go .. I recently setup a TC to help a guy run his Roku.. and this setup worked well.. I have no idea if it can work in your case.
    Lets say the IP you get is 192.168.2.1-10 .. doesn't matter what it really is. And the adsl modem is 192.168.2.254
    (Assuming they are private addresses.. if they are public IP you can just use the DHCP and NAT. )
    But go to the airport utility.. I think you need to run v5 at least to change DNS.. but you can do the same thing in v6 using static but no dns changes.
    Now you set the IP of the TC manually.. This address might need to be in the dhcp range of the modem to work. You can set the DNS to same IP as the router address.. ie home address of the modem. Or you can use another DNS.. whatever you like.
    Then set DHCP for clients that will join.. this can then expand the scope of addresses..
    It worked without a NAT error.. although I am not sure exactly how.. on paper it should not be able to work but did.. have a go.. otherwise there is perhaps another way.. but it is complicated.
    Give us an example from a computer plugged into the modem of what IP .. subnet mask .. Gateway and DNS you get. Then I can fine tune the values for it.

  • Can I use my iMac with a thunderbolt connection as an Display for my new Mac Mini with thunderbolt ??

    Can I use my new Mac Mini with Leopard and thunderbolt in connection with my new iMac as a display ?

    If it's a 27" iMac. I don't believe Target Display Mode is supported on the 21" model. But not with a Mac Mini running Leopard. It would need to be running Lion.

  • How can I control my my mac mini with my macbook air (no wifi)?

    How can I control my my mac mini with my macbook air (no wifi)? Also...what is the best method (less lag) for screen sharing? 
    I own a mac mini Quad Server 2.0 i7 and I use it for audio production.  It's great but I need to travel with it. I was hoping some form of screen sharing could be useful using the macbook air to control the mac mini.  Therefore, I'd be using the stronger processor of the mac mini but would still be using the keyboard and trackpad from the air. 
    My two problems: 
    1.  I can't depend on wifi to make this happen. Wifi is not always available when travleing.  What would be the best way to configure a LAN connection?
    2.  The less lag the better for screen sharing.  Which apps are fastest?
    Thanks in advance.

    Both of your devices have WiFi built in. Here is Apple Support's solution:
    http://support.apple.com/kb/TA25616?viewlocale=en_US&locale=en_US

  • I have a mac mini with a web cam/microphone and would like to be able to facetime with my families iPhones 4S/5 using wi-fi email address.  I can't call the iPhones from the Mac Mini with Mountain Lion OS.  What is wrong?

    I am trying to include a Mac Mini with a webcam/microphone to call several family iPhones 4S/5 usisng email addresses vice phone numbers so that we can communicate from outside the US via iPhone to the US (Mac Mini) via wi-fi and email addresses.  We are using the same email address for the Mac Mini as for Itunes and made new email addresses for each of the iPhones.  I cannot receive calls from the iPhones but can call the iPhones from the Mac Mini.  what needs to be corrected?
    Thanks.
    Steve

    Hi Steve,
    Thanks for visiting Apple Support Communities.
    You may find some useful suggestions in these articles:
    FaceTime for Mac: Troubleshooting FaceTime
    http://support.apple.com/kb/ts4185
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/ts3367
    Have a great day!
    Jeremy

  • Cannot install windows 7 on brand new mac mini with 256 g sdd? Please help.

    Cannot install windows 7 on brand new mac mini with 256 g sdd? Please help.
    Have tried all tricks found on the net and followed every advice from apple support.
    Still black screen with blinking curser when mini is rebooting following partitioning via bootcamp.
    Very nice and fast mashine, wouldnt like to return it.
    thanks allan

    Is that an Apple SSD?
    what model is it?
    Is there a firmware update if non Apple?
    Lion is not server version.
    Windows is ? ISO or retail?
    Google macmini Windows 7 SSD Apple Boot Camp

  • I have replaced my old Mac Mini with new one.  What should I do about my Time Capsule?

    With the old Mac Mini (2009 model) I used Time Machine and a Time Capsule to back up everything on the Mac Mini itself and on external hard drive I added when I needed more storage space.  I've replaced the old Mac Mini with a 2011 model, and migrated the contents of the old one to the new one from Time Machine. 
    I'm now trying to figure out what I should do to my Time Capsule and/or Time Machine to make backups going forward of the same content, now on my new Mac Mini and same external hard drive. 
    When I go into Time Machine, it does not seem to recognise the items on the external hard drive as ones that I can backup (or not, as there were some items there that I did not and do not wish to backup to Time Capsule) through the new Mac Mini. 
    I am uncertain too whether the Time Machine/Time Capsule will recognise the items of my old Mac Mini as the same ones that are now on my new Mac Mini and save changes there, or whether it will try to save all over again all the same items, as they are now on a different computer. 
    My inclination is to clear out the contents of the Time Capsule now and start all over again.
    I have looked through information provided by Apple but not found answers to my questions.

    The situation concerning the hard drive is complicated.  It is not included in the list of Excluded Items.
    If the drive is not "Excluded", then it must be included.  That is the way that Apple's software works.
    But, nor am I given the option to select it or any of the items in it for adding to the list of Excluded Items.
    If you want to add an item to the list of Excluded items, click the + button at the bottom of the Excluded list, then navigate to select the drive to add it. Once the drive has been added, you can go back in and select the items.
    When I go into the exclude from backup area and select the hard drive, it and the items in it appear in dimmed form, but I cannot select them.
    Sorry, I do not understand what you are trying to say here.
    What I want to do, but cannot, is what I did before, select one of the items in it not to be backed up and leave the rest to be backed up
    I have no idea how you were able to do this. As long as I can remember, Time Machine will not allow you to pick and choose items on a drive to be backed up or excluded. Your option is to have the entire drive backed up, or the entire drive to not be backed up.
    have not seen the 'Quick Erase' option.
    You would use AirPort Utility to erase the Time Capsule drive. Open AirPort Utillty and click the Disks tab at the top of the screen. Then, click Erase Disk.  The Quick Erase option will appear.

Maybe you are looking for

  • Trigger Unix Program from a stored procedure

    Is it possible to start a Unix program as a background OS process from a stored procedure? In fact I want to call a stored procedure which starts a Unix process. After the termination of this process get the results of the programm (a text file) usin

  • Issue in BEx Report

    Hi All, Question 1 ) I have an issue in the variable selection screen, because i need to change the Variable field from 3 to 1 for e.g 1 ) TESTVAR1 (Material) 2) TEST VAR2(Vendor) 3) TESTVAR3(Plant) Now i want to display Variable popup screen as show

  • Extending AbstractPageBean

    The GUI freaks out when I create an abstract class BasePage extending AbstractPageBean and utilize this page as an ancestor for all of my pages. The GUI complains as follows: main.java:1: Java class must be a direct subclass of one of the following c

  • ActivexWord_Table

    Hello, I want to create a table in the word document and also i want to write some data in specified column and row. Is there any library functions for this. Regards Shivakumar Singh

  • Final Cut Freezes up

    I got the computer but not the brains, can some one help? When I log and capture footage Final Cut Pro freezes up but no other program is effected, I have to force quit to get out. This problem happened out of nowhere, I had log and capture set to un