Mac Mini won't boot past Apple logo and spinning wheel

Hello,
I have a Mac mini (late 2009) running 10.8.2. Today, I tried to log into the computer. It accepted my username and password, but then the screen turned gray instead of logging in. I left it like that for about twenty minutes, then gave up on waiting and Ctrl-Command-Power rebooted it. It then wouldn't reboot: it gets to the Apple logo and spinning loading wheel, but won't go past there.
So I went into single-user mode and was able to access the HD fine. I ran a filesystems check using the recommended syntax (/sbin/fsck -fy, I think). It said that the volume looked okay, and that it had been modified. I took this as a good sign (that it had been repaired) and typed "reboot" to restart the machine. I held Command-Shift-V to perform a Verbose Safe Boot.
The computer makes no further progress after the following four lines:
vboxdrv: fAsync=0 offMin0x809 offMax=0x2bc3
VBoxDrv: version 3.2.12 r68302; IOCtl version 0x140001; IDC version 0x10000; dev major=34
VBoxFltDrv: version 3.2.12 r68302
VBoxAdpDrv: version 3.2.12 r68302
I'm assuming all the instances of "vbox" are in reference to Oracle's VirtualBox VM. I do have VirtualBox installed, but haven't used it in a while (months), so I don't see why it's suddenly causing a problem.
To clarify, the computer doesn't "hang" after these lines: I can still type text into the terminal. The entire log is being saved to /dev/console, so I could probably grab it from Single-User Mode if necessary.
Everything else seems to be working properly: even the wl0 drivers are loaded.
Does anyone have any suggestions about how to fix this, or at least disable VirtualBox so the computer can start?
Thanks!
WC

Cult of Mac post:
When the Apple Logo appears your Mac has found a valid system disk, and Mac OS X begins loading.
Apple Logo with Spinning Gear
Once the spinning gear appears the BSD kernel (Darwin) has assumed command and begins loading device drivers. Shortly thereafter it transfers command to the almighty (and controversial) launchd process. Such are the workings of UNIX.
What this means for us mortals is that when a Mac stalls at the Apple logo or the logo with a spinning gear, it probably has a corrupt Mac OS X installation. It may also be having trouble accessing an internal or external hardware component, but this is less-likely.
Rebooting your Mac in Safe Mode can sometimes get things working well-enough that a second, normal reboot then works normally Hold down the Shift key at startup to boot in Safe Mode. DiskWarrior is also worth a shot (this is by far my most used disk utility). If that doesn’t work, an Archive & Install may be needed.
Read more at http://www.cultofmac.com/50685/how-to-fix-common-mac-startup-problems-macrx/#CGI mG3jeGEBtysX1.99

Similar Messages

Mac pro running OS 10.5.8 won't boot. Apple logo and spinning wheel shows then Apple logo turns into Forbidden signage while spinning wheel continue. It happenened right after I installed a firmware. Had to restart.Please help. What can I do?

Mac pro running OS 10.5.8 won't boot. Apple logo and spinning wheel shows then Apple logo turns into Forbidden signage while spinning wheel continue. It happenened right after I installed a firmware. Had to restart.Please help. What can I do?

Work through the suggestions in this article:
Mac OS X: Gray screen appears during startup

Mac won't boot up past apple logo and spinning wheel

It wasn't responding at all, so I had to hard shut off (Hold down power for 10 seconds). When I tried booting it up, this happened. So after 10 minutes, I tried to hard shut off again, and retry. Same problem. I didn't know what to do at that point. Needless to say it's now off, but when I try to turn it on, it goes to the apple logo, the wheel sins endlessly.
I just got a new hard drive and battery in January. I can't lose this because it has some VERY important information on it

ok, it MIGHT be the hard drive, but I don't know enough to be for sure. When I booted from the leopard disc, it couldn't dint my hard drive to install it on. I went to disc utility, and it did show my dvd drive, but not my hard drive. I tried booting without the disc and holding option down, and nothing happened. I tried booting holding down the s key, and a folder icon showed up that had a question mark over it.
Any advice?
I have a late 2006 2.0 intel with 512mb RAM 80 GB hard drive
Message was edited by: basstone97

MacBook pro 15" 2008 freezes at apple logo and spinning wheel

Have a MacBook pro early 2008 have installed lion but recently started to have problems. Started to freeze a lot so I would restart and most of the time it would work untill it froze again , now it's got worst every time I restart my Mac it won't go past apple logo and spinning wheel just freezes have been trying and trying but same thing freezes. Tried to start in save mode but no still freezes
Please has anyone got any suggestions thanks

The startup disk may need repairing.
Use Lion Recovery
Not enough free space on the startup disk can cause the system to freeze.
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space.

Macbook Pro (2011) froze while working, forced shut down, now won't turn on. Grey screen with apple logo and spinning wheel for hours. Help?

Macbook Pro (2011) froze while working, forced shut down, now won't turn on. Grey screen with apple logo and spinning wheel for hours. Help?
Unfortunately do not know the operating system since I never updated anything and I can't get in to it.
Thanks for your assistance.

If you want to preserve the data on the boot drive, and it's not already backed up, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data, you can skip this step.
There are several ways to back up a Mac that is not fully functional. You need an external hard drive to hold the backup data.
1. Boot from the Recovery partition or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

My iMac will not boot past the logo and spinning gear

My iMac will not boot past the logo and spinning gear (After a Rogue Amoeba update). I can't access the recovery disk I made on a flash drive. (Am I doing it correctly? - Hold down option while switching on? It just stays on the logo). What (if anything) can I do please?

If you installed Lion onto your machine, it should have created a Recovery HD (hidden from view, but visible in Disk Utility with its Debug menu enabled, under Show all Partitions).
That article states:
Note: In order to create an external Lion Recovery using the Lion Recovery Assistant, the Mac must have an existing Recovery HD.
Would I see the recovery menu (by holding down option on power up)
Yes.
if there was no recovery disc connected do you think?
Shouldn't matter, since your int HD is always connected.

I cannot start my mac book. Apple logo and spinning wheel on gray screen. Tried pressing shift key on start up nothing happen. Tried shift command V screen is still stuck

I cannot start my mac book. Apple logo and spinning wheel on gray screen. Tried pressing shift key on start up nothing happen. Tried shift+command+V screen is still stuck

Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
=======================================
Reinstall - Mavericks, Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
three times faster than wireless.

HT204347 Hi my serial number on bottom of my mac is W8*******66E when l try to try the computer on it is just going to grey screen with apple logo and spinning wheel i have tried starting in safe mode and a few other suggested solutions and they have not

Hi my serial number on bottom of my mac is W8******66E when l try to turn the computer on it is just going to grey screen with apple logo and spinning wheel i have tried starting in safe mode and a few other suggested solutions and they have not worked?
<Edited by Host>

What other solutions have you tried?
This may help you:
https://discussions.apple.com/docs/DOC-3353
Ciao.

IMac is stuck on apple logo and spinning wheel

My wife did a software update and them it asked for a restart, she click restart but the computer got stuck in apple logo and spinning wheel. Won't go past that now. Just keeps spinning! Help for I know not what to do!!!! Please any idea?

An invalid node is an error DU cannot repair. If you don't mind spending $100 for Disk Warrior, then I suggest you buy it because it can fix the error. Otherwise, do as the warning says. Backup your files. You will then have to erase the drive and reinstall. The procedure is:
Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
        the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

Apple logo and spinning wheel after hard drive replacement and restore

Hi, need some help!
I replaced my hard drive at the weekend in a mid 2010 MacBook Pro with a Samsung/Seagate 1TB 2.5 inch 5400RPM SATA II Hard Disk Drive. The install of the hardware went fine, and the computer recognised it no problem. I went through the process of formatting which again went ok, then I moved on to the restore of the old image from my time machine.
After the 4 hours or so it said restore successful and a restart was required - after the restart I am presented with the apple logo and spinning wheel and can make no progress beyond this point.
I have tried 3 restores now - all of which were 'successful' and have the same issue. I have checked the disk using the repair tool and there are no recoded issues so I'm at a loss.
Can anyone help!!
Thanks in advance

Hey andrew1878,
Thanks for the question. I understand that you are experiencing issues with your MacBook not loading up past the Apple Logo and spinning gear. The following resource may provide a solution:
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570
Thanks,
Matt M.

My macbook wont reboot apple logo and spinning wheel thats it.

I watched youtube videos and tried command r and now it keeps popping up you need to restart your computer. Everytime I restart it, it pops back up! HELP!!

Apple logo and spinning wheel is different than the need to restart your computer message.
See this Apple note on the spinning wheel at boot. If you are running OS X 10.7 or later, then rebooting with the command and r keys will get you into recovery mode, where you can use Disk Utility to repair the hard drive.
FYI, the need to restart your computer message in multiple languages is called a kernel panic, which is usually, but not always, caused by a hardware issue. If you have OS X 10.7 or later, you should be able to run the Apple hardware test. Prior to that, you need the disks that came with the system to run it. If you can run it, run the extended test when prompted, which can take over an hour to run.

Please help me! MacBook Pro stuck on apple logo and spinning wheel

Hi I'm really desperate and need help! My MacBook just stopped loading and would stay on the gray screen with the apple logo and spinning wheel.
I have tried safe mode and it would load a little and stop and then the loading bar would be blank and it would stay like that forever!!
I also have tried doing the single user mode and when I type the fsck - fy it will do a couple more lines then it will say error like a hundred times :(
I did verbose mode and it would just give me stuff that I have no idea what it saying I left on verbose mode for like 5 hours and it would just give me lines of stuff I have no idea what it's saying!
I downloaded lion through apple store so I don't have the disk I only have my snow leopard disk
Please please someone tell me a solution it's my moms laptop and I don't want to get in trouble!

Reboot in recovery mode an possibly repair over the internet.
Command-R to the rescue.
Just hold down Command-R during startup and OS X Recovery springs into action. It lets you choose from common utilities: You can run Disk Utility to check or repair your hard drive, erase your hard drive and reinstall a fresh copy of OS X, or restore your Mac from a Time Machine backup. You can even use Safari to get help from Apple Support online. And if OS X Recovery encounters problems, it will automatically connect to Apple over the Internet.
http://support.apple.com/kb/HT4718

I did an auto software update on my iMac, which included a restart. When the machine restarted it's stuck with an Apple logo and spinning wheel. I've tried all of the key strokes that are supposed to work, but nothing has. Any suggestions? Thanks!

I did an auto software update on my iMac, which included a restart. When the machine restarted it's stuck with an Apple logo and spinning wheel. I've tried all of the key strokes that are supposed to work, but nothing has. Any suggestions?

Gray screen could be any number of things, bad third party at boot kext file, a bad Apple one, a bad install/upgrade of OS X, drive corruption etc.
Run through this list of fixes
Step by Step to fix your Mac

Macbook Pro Stuck at Apple Logo and Spinning Wheel

I Have ML. Just did the most recent update. There seemed to be a bundled group of updates. Once all was updated, my computer froze. I shutdown and restarted and it was stuck on the Apple Logo and spinning wheel. I have tried everything. Safe Mode, Command R, Command/Alt/R/P....it does nothing. Any advice out there?

Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

IPod Nano Won't Boot Past Apple Logo...

Sup all?
...Got an interesting problem here. Replaced an LCD in a Nano for a friend, installation went smooth & without problems (or so I thought). After installation was complete, I put the Nano back together & started loadin' & playin music on the Nano. About 2 days later, I decided to update it w/the new iPod Updater (can't remember the date). Now the iPod Nano won't boot past the Apple Logo. I can tell that the "menu" has been loaded 'cuz you can hear the clickin' sound when you operate the wheel.
I've tried reformatting the iPod Nano (quick & full) & then trying to restore it, but it won't boot past the logo (after successful restoration?). Now I'm going to run the battery dead & then try to restore it again.
Any suggestions/comments on this?

The solution I see in your case is to go back and download an older iPod Updater.
See this link -> iPod Updaters
I suggest taking either the January 2006 iPod Updater, or March 2006 iPod Updater.
IMHO, Some of these freezing issues occur because of a fault in the latest iPod Updater.
I suggest going back to March (or January), and the nano could possibly work again for you.
-Kylene
If any post helps or solves your issue, please mark it that way accordingly. Thank you for helping the boards!

Mac Mini won't boot past Apple logo and spinning wheel

Similar Messages

Maybe you are looking for