Mac os 10.4.4 combination update won't install

I went into my software update and tried to download the new version. It will completely download, yet when it tries to install it says that the digital signature is wrong and quits. Any ideas how I can fix this so that I have the updated version?
Thanks

Since you tried it through SU also and it will not authenticate, it may indicate directory damage.
Repair Disk:
Steps for using Disk Utility
1. Insert your Mac OS X CD-ROM disc or Restore DVD disc, then restart the computer while holding the C key until you see the spinning gear..
2. Once started up from CD or DVD, choose Disk Utility from the Installer menu.
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from disc to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume, if necessary.
6. Click Repair.
If you repair errors run it until no errors found.
Let us know.
-mj
[email protected]
EDIT: See how confusing it gets? I posted in the wrong thread!
Message was edited by: macjack

Similar Messages

  • Mac OS X 10.4.9 Update won't install on my MacBook Pro

    Everytime I try and install Mac OS X Update (Intel) 10.4.9, Java for Mac 10.4 release 5, Quicktime 7.1.5, and iTunes 7.1.1 (either sperately or at the same time, through System Update) I get this message after a period of time:
    'A networking error has occurred: timed out (-1001). Make sure you can connect to the Internet, then try again.'
    I am connected to the internet via the AirPort via Satelite.
    Any idea what could be wrong?

    It could be a transient problem with the network or the server that fixes itself after some time for no apparent reason. It may just work if you try again later.
    Also, go to Apple Menu > System Preferences > Network, choose Network Port Configurations from the Show popup menu, and make sure that the configuration used to connect to Internet appears at the top of the list.

  • HT1338 everytime i download Mac OS X Snow leopard combined update error occured, why?

    everytime i download Mac OS X Snow leopard combined update error occured, why?

    Are you running close to the line with Memory?

  • Windows updates won't install

    Hello,
    I have a remote user whose Windows updates won't install. He has a Dell laptop with Windows 7 Pro 32-bit. You can bring up the update windows and start the install but, at exactly 10 seconds, it just says "Updates failed" and doesn't really give
    any more information.
    I saw the Windows update service was stopped, I started it and that didn't seem to help. I also tried the update troubleshooter and that didn't do anything. I checked for malware and didn't find any, and he has plenty of disk space. I didn't see
    anything in Even Viewer or Reliability Monitor either.
    What could it be?
    Thanks. 
    Chris Hansen

    Hi Chris,
    Firstly, please check if those Windows Update have already installed:
    1. Open Windows Update by clicking the Start button. In the search box, type
    Update, and then, in the list of results, click Windows Update.
    2.In the left pane, click View update history.
    3. Click Installed Updates at the top of the page, there check if any Windows Update installed recently.
    If there is no any Windows Update installed, try to
    reset the Windows Update component to check if it could resolve the issue.
    Karen Hu
    TechNet Community Support

  • Windows Updates won't install - Error 0x80072EFD

    Question 
    Windows Updates won’t install.  I’m receiving Error 0x80072EFD.  What can I do to solve this?
    Answer 
    This particular error means that your computer was not able to connect to the Internet when it tried to install updates.  First, check your Internet connection and then try again. If that doesn’t work, try the methods below.
    Method A: Make sure that Windows Firewall is turned on, and temporarily disable third-party firewalls
    Warning This workaround may make a computer or a network more vulnerable to attack by malicious users or by malicious software such as viruses. We do not recommend this workaround but are providing this information so that you can implement this workaround at your own discretion. Use this workaround at your own risk.
    To complete this method, follow these steps.
    Step 1: Make sure that Windows Firewall is turned on
    To open Windows Firewall, click the Start button, and then click Control Panel. In the search box, type firewall, and then click Windows Firewall.
    Click Turn Windows Firewall on or off.
    Click On (recommended), and then click OK.
    Step 2: Temporarily disable third-party firewalls
    Click the Start button, click Control Panel, and then, under System and Security, click Review your computer's status.
    Click the arrow button next to Security to expand the section.
    Under Firewall, read the firewall status note. This information will indicate which, if any, firewall is installed and whether the firewall is turned on. For example, for ZoneAlarm, the notice will say ZoneAlarm Firewall is currently ON.
    Open the third-party firewall application that is listed in the firewall status note, and temporarily disable the firewall. If necessary, refer to the firewall application documentation, or contact the application vendor for more information about how to temporarily disable the application.
    Step 3: Try to install the updates again
    If this method resolved your issue, follow the steps in Method B, step 2 to re-enable your third-party firewall. You might want to also check for and install any necessary updates to your third-party firewall.
    If this method did not resolve your issue, continue with Method B.
    Method B: Temporarily disable third-party antivirus software
    Warning This workaround may make a computer or a network more vulnerable to attack by malicious users or by malicious software such as viruses. We do not recommend this workaround but are providing this information so that you can implement this workaround at your own discretion. Use this workaround at your own risk.
    Note If your third-party firewall is still disabled from Method A, do not open e-mail messages, surf the Web, or use instant messenger at this point.
    Step 1: Locate and temporarily disable your third-party antivirus software
    Note Windows does not detect all antivirus software, and some antivirus software doesn't report its status to Windows. If your antivirus software is not displayed in Windows Security Center, and you're not sure how to find it, try any of the following:
    Look for the antivirus software in the list of programs on the Start menu.
    Type the name of the software or the publisher in the Search box on the Start menu.
    Look for the software in Action Center:
    Click the Start button, click Control Panel, and then, under System and Security, click Review your computer's status.
    Click the arrow button next to Security to expand the section.
    If Windows can detect your antivirus software, it will be listed under Virus protection.
    If the software is turned on, check the Help documentation that was included with the software for information about how to disable it.
    Note You may have to look in the application documentation to determine how to do this.
    Step 2: Check for Windows Updates
    As soon as the antivirus software is temporarily disabled, visit the Windows Update or Microsoft Update site again, and try to download and install updates.
    If this method resolved your issue, and you were able to install the updates successfully, you should re-enable your third-party antivirus software.
    If this method did not resolve your issue, continue with Method C.
    Method C: Disable software accelerator programs
    Disable any software accelerator programs that may be running. Some examples of these programs are file download accelerators and Internet speed accelerators.
    Note If your third-party firewall is still disabled from Method B, do not open e-mail messages, surf the Web, or use instant messenger at this point.
    Step 1: Disable software accelerator programs
    To do this, select from the following options:
    See the documentation that was included with the program.
    View the Help files for your program.
    Contact the program vendor. For information about how to contact the program vendor, visit the following Microsoft Web site:
    http://support.microsoft.com/gp/vendors
    Step 2: Install Updates
    As soon as the software accelerator program is disabled, visit the Windows Update or Microsoft Update site again, and try to download and install updates.
    If this method resolved your issue, you should enable the software accelerator programs that you disabled in Step 1.
    If this method did not resolve your issue, continue with Method E.
    Method D: Add the Windows Update Web site and the Microsoft Update Web site to the Trusted Sites list
    Note If your third-party firewall is still disabled from Method A, do not open e-mail messages, surf the Web, or use instant messenger at this point.
    To add the Windows Update Web site and the Microsoft Update Web site to the Trusted Sites list, follow these steps:
    Start Windows Internet Explorer.
    On the Tools menu, click Internet Options.
    Note If you are using Internet Explorer 7, and the menu is not available, press the ALT key on your keyboard to access the Internet Explorer Menu.
    Click the Security tab, and then click Trusted Sites.
    Click Sites, and then click to clear the Require server verification (https for all sites in this zone check box.
    In the Add this Web site to the zone box, type the following addresses, and then click Add after you type each address:
    http://update.microsoft.com
    http://windowsupdate.microsoft.com
    Click OK two times.
    Try to install the updates again.
    If this method resolved your issue and you were able to install updates successfully, you should re-enable your third-party firewall if it is still disabled. To do this, see step 2 in Method A.
    For more methods and advanced troubleshooting techniques, see You may encounter temporary connection-related errors when you use Windows Update or Microsoft Update to install updates.

    Mark, I've just been through this update issue with two installations.  In my case, it seemed intertwined with authentification and indexing not working, either.    Upon a transfer of my system disk to new hardware I got hit with the issue and couldn't fix it.  Which is why I did a clean install of Win7 ultimate 64bit on my T61p.  The install (including update) worked great until I ran the intel matrix storage manager update.  This broke windows update.  If you surf the web, and include "intel rapid storage manager" or "intel matrix storage manager" and "Windows update fails", you'll see that a lot of folks feel that the intel driver (or how windows handles it) is what breaks update.  I tracked this down to a driver, iastor.sys, in windows\system32\drivers.    I was able to fix my Window Update by copying an iastor.sys from another recently built machine (should be exactly the same, but this was my wife's T510, but still Win 7 Pro 64) to overwrite the iastor.sys that the intel update changed.  To be clear: I couldn't get windows update or indexing to work.  I overwrote* the "bad" iastor.sys with one that worked on another computer.  Rebooted.  Update worked. I just wanted to point out that instead of blindly installing updates to fix problems, folks should be aware that sometimes the update is the problem. Especially as these systems are off warranty and the drivers are not being updated.  I've asked elsewhere, so let me ask here: Where is the System Interface Driver for t61p?  Not listed anywhere on site, links on the web referring to it are all broken.  Is the System Interface Driver now part of another driver program?  Thanks! Jim T61p, Win 7 Ultimate 64bit, and T510, Win 7 Pro 64bit

  • 10.6.8 update won't install gets half way through then just freezes spinning beach ball for 4 hours any ideas y. Tried and restarted 3 times already does the same thing each time have to hold down the power button to restart

    10.6.8 update won't install gets half way through then just freezes spinning beach ball for 4 hours any ideas y. Tried and restarted 3 times already does the same thing each time have to hold down the power button to restart. Anyone can help

    Ok will check, as of right now I have 82.57gb free, that's plenty of space will check the disk though using disk utility. Also I am now downloading the update from the apple website instead of going through software update

  • 10.4 update won't install

    latest iTunes update won't install correctly. Says to shut down iTunes for update to complete. I've made sure 3 times that iTunes was not opened.

    I'm having the same problem with Windows 7 and cannot download direct from the website. 

  • Updates won't install,billing info wrong

    Updates won't install,keeps saying problem with billing info,then there was a problem with a previous payment,but I can't find out what is was.

    You'll have to update your billing info from itunes, here's a guide on how to do it on iOS http://support.apple.com/kb/ht1918?viewlocale=nl_nl .  It may be that there weren't suffecent funds at the time of the last purchase, in which case you'll just have to varify the three digit security code. Hope it helps!

  • Illustrator update won't install, even after uninstalling and retrying multiple times.

    Illustrator update won't install, even after uninstalling (using the "Uninstall Adobe Illustrator CS6" app and retrying (using Adobe Application Manager}multiple times. Now I can't open AI CS6 at all.
    The error message I get in Application Manager is:
    "Application could not be found. Restore in case it was trashed/moved to a different volume. Reinstall the application otherwise (U44M1P2B)"
    Help!

    Can you please try installing the Adobe Application Manager from http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774.
    If that doesn't work then the safest course would be to remove all Adobe Creative Software using the uninstallers located in Applications/Utilities/Adobe Installers.  This should then remove the Adobe Application Manager folder also inside Utilities.  Once the software is completely uninstalled and the Adobe Application Manager is removed then you should be able to reinstall from https://creative.adobe.com/.

  • New update won't install on my Dell Laptop Windows 7.  Even tried from the iTunes website.  Now all of my access is gone.  What must I do?

    New update won't install on my Dell Laptop Windows 7.  Even tried from the iTunes website.  Now all of my access is gone.  What must I do?

    Hello SandyJeanne,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    Best of luck,
    Mario

  • Jam Pack 4 update won't install

    I've resinstalled *Jam Pack 4* 1.0 and went to Apple's site and downloaded the 1.0.1 update to correct some sound quality issues. However, the update won't install. I keep getting the message, "There is nothing to install," when I get to that step in the installation process. I see in an archived area others have had this problem as well with this Jam Pack 4 update. Why won't the update install?
    Any help out there for this?

    try repairing permissions:
    http://www.bulletsandbones.com/GB/Tutorials.html#repairingpermissions

  • IPhoto 9.1 update won't install

    I just bought a new MacBook Pro.  It came with iPhoto 11.  The iPhoto 9.1 update won't install.  It keeps saying that I need iPhoto 9.0 or greater, but I have iPhoto 11.  I have not moved iPhoto from its default location.  My computer is only 2 days old.  I've seen others with this problem, but no real solution.  Anyone have any suggestions?

    Thanks for your response TD, but this App, iPhoto 11 came already installed on my computer.  I registered my computer, but you can't register a product without a serial number.  I don't have the iPhoto 11 serial number because it came installed on my computer already.  I tried re-installing iPhoto 9.1 after registering my computer and got the same error message.  However, I did find out that I hae 90 days of complimentary phone support.  So I will be giving Apple a call.

  • Installing Mac OSX 10.4.11 combined update

    I'm having issues with my Mac locking up. The mouse, pointer freezes and everything locks up completely, forcing me to restart. I thought just reinstalling my 10.4.11 combined update would fix it, but I'm now in the middle of the process and wonder if I've done the right thing. I've just installed the combined update and it's telling me to restart, but I'm worried now that it might mess something up. If I just restart will it screw anything up? Maybe it won't fix my problem, but I just don't want to lose anything I have on my machine. So if I just get out of this process I'll be happy.
    Also, I purchased Tiger early on, but can only find my 10.3 Tiger disc, not a 10.4. There should have been a straight 10.4 disc, correct? Since I purchased it, way back when, shouldn't I be able to pay for a replacement disc and shipping? Then I could replace my system, hopefully curing my problem.
    My Mac has been so reliable over the years I can't even remember whether there truly even was a 10.4 disc. It's been so long since I've had problems.
    Thank you in advance for your help!
    Leonard

    Hi Leonard,
    Maybe it won't fix my problem, but I just don't want to lose anything I have on my machine. So if I just get out of this process I'll be happy.
    Too late, only way out is to restart.
    Also, I purchased Tiger early on, but can only find my 10.3 Tiger disc, not a 10.4. There should have been a straight 10.4 disc, correct?
    Correct, & do not use the 10.3's Disk Utility on a 10.4 volume.
    Since I purchased it, way back when, shouldn't I be able to pay for a replacement disc and shipping?
    No, the only "Replacement Discs" they might have are the ones your Mac came with, 10.3 apparently.
    See Tom's, (Texas Mac Man), great info on where/how to find/get Tiger...
    http://discussions.apple.com/thread.jspa?messageID=9755670&#9755670
    Or Ali Brown's great info on where/how to find/get Tiger...
    http://discussions.apple.com/thread.jspa?messageID=10381710#10381710

  • HT1338 Itunes 11 & Mac OS X 10.7 downloaded, but won't install. I get message "folder cannot be created"

    I've downloaded updates for iTunes & Mac OS X 10.7. But they won't install.

    Welcome to the Apple Support Communities
    The latest iTunes version is 11.0.1 version. 11.0.2 does not exist. Have you tried opening Apple menu > Software Update and install iTunes 11.0.1? If it doesn't show up, you have already iTunes 11.0.1

  • My update won't install.

    I'm trying to update my firefox but it won't install. There are no other versions firefox running. I get to the point of apply update, I have tried restarting my computer multiple times. I have an iMac. I use OS X 10.9.2

    If there are problems with updating or with the permissions then best is to download the full version and trash the currently installed version to do a clean install of the new version.
    Download a new copy of the Firefox application and save the disk image file to the desktop
    *Firefox 28.0: http://www.mozilla.org/en-US/firefox/all.html
    *Trash the current Firefox application (open the Applications folder in the Finder and drag the Firefox application to the Trash) to do a clean (re)install
    *Install the new version that you have downloaded
    *https://support.mozilla.org/kb/Installing+Firefox+on+Mac
    Your personal data is stored elsewhere in the Firefox profile folder, so you won't lose your bookmarks and other personal data when you uninstall and (re)install Firefox.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox

Maybe you are looking for