Mac OS 10.9 Mavericks (Issues)

Hi,
We just upgrade from Mac 10.6(Leopard) to 10.9(Mavericks). We have encountered the following issues:
Label with color in the folder – If we click on the label for selected items. The label will applied correctly for folders or files on the earlier version of Mac. But the new version of Mac (Mavericks) does not work this label option.
Taking longer time in Search – In an earlier version, any search will find immediately. But this version of Mac (Mavericks) does not search properly and a result says no item(s). If we go ahead and search again, then the search item will appeared on the Mac.
Copy and Paste option – In an earlier version, the copy and paste option on the server working well. But this version of Mac (Mavericks) we need to try at least 3 to 5 times and then the files/folders will paste into the destination folder. For just do copy and paste it does not work well.
Refresh Folder(s) – The folder(s) does not get refreshed every time on the server. It will only refresh when we create a new folder.
Can you please help me on the issues to resolve in this version of Mac (Mavericks) that is listed out above. I would appreciate if someone response to us immediately.
John

I didn’t’ see an official statement about this issue.
Can you check that this problem happen on several MAC computer?
Please update Lync for Mac 2011 to the latest version if you didn’t do that.
Check if you can search the full SIP address of a Lync users. This may be a replication issue.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • Monitor Issues after upgrading Mac Mini OS to Mavericks

    I upgraded my older Mac Mini OS to Mavericks.  The monitor always worked fine on Snow Leopard (10.6.8 I think), but now my Hanns G monitor takes fifteen minutes to display anything.  Until then it is blank and makes clicking, popping noises every 3-5 seconds.  After it comes up, it works fine and all the settings seem to be correct.  Any ideas? Many thanks for any help you can provide.

    Some more info: the monitor is a Hanns G HC194D and is set for 1280 x 1024 with a NVIDIA GeForce 9400 256 MB graphics.  My Mac Mini has a 2.26 GHz Intel Core Duo processor and has 2 GB 1067 Mhz DDR4 memory. The monitor display profile says it was created two weeks ago which strikes me as a bit odd, but I updated the OS well before then and this has been an issue since I updated to OS 10.9.3.  I have played around with the cables and the connections are tight, and once the monitor finally displays after 15 minutes or so on start-up or deep sleep, the monitor looks and runs fine. 
    It seems too coincidental that this problem only surfaced after upgrading the OS for it to be a monitor hardware issue, but I haven't seen any other reports of this type of problem. This is a very frustrating problem, so thanks for reading this far.

  • Pages5.1+Mavericks = issues with margins, attaching, transport, pictures, printing, more.

    Got Mac Mini with Mountain Lion  ; the GOALS for this computer:
    Writing for publication, filling out forms, sending data, photo editing and adjustments, artwork, tasks, email, online consulting, volunteer advocacy, research, etc.
    Was beginning to get the hang of things, with some difficulties;but was not finding what I needed.
    Unknowingly took bad advice: updated to Mavericks.
    Everything FUBAR'd. 
    Straightened some things out; at least can access email, get online, do a few things--still can't do meaningful work on it.
    Mini = very expensive Entertainment Box; NOT my priority.
    I Thought: download programs that can do work.
    Got Pages 5.1.  It fails to work right:
    Margins refuse to adjust. 
    Pictures pasted into Pages document, very hard to adjust on page or get type to wrap around picture, adjust sizing, etc.--time wasting, unable to adjust as wanted on pages--settled for what it would do at all. 
    Page Setup is hardly relevant to actually setting up a Page.
    Won't attach to Email.
    Won't allow reading it anywhere but on the computer it was made.
    Won't allow saving Pages nor Text documents using ANY other extensions.
    Saving is a contorted mouse-hunt; there's no "save-as". 
    For one typed page, a box told me there was HTML in the thing, and that it couldn't deal with it, even though there wasn't.
    Pages document Won't save properly to a Pendrive for transport: it reads OK on the MAc, but on the PC, only 1st page visible, the rest unitelligible, pixelated, when moved to a PC. 
    I thought to transport the Pages document to the PC to copy/paste it into a Owrd Document--THAT failed, too.
    Trying to print this Pages document turned into a nightmare: 1st page almost printed, ensuing pages resembled NOTHING I'd saved; a 10-page Pages document turned into many more pages of garbled mess. 
    I haven't had time to try other features; just making a pretty basic Pages document has been a wicked time-waster.
    There doesn't seem to be ANY work-around.
    I Thought: copy/paste the content of the Pages document, into a Text document: THAT FAILED.
    Copy/Pasting one page at a time for this maneuver, also failed: 
    Pictures [.jpg] turn fuzzy and HUGE, and refuse adjustment in any way I can find. 
    Pictures refuse to adjust Easily, whether Pages or Text--couldn't make pictures in Text adjust at all.
    Very UNimpressed with the picture editing on this Mac, to date.
    Having terrible time doing ANYthing to adjust .jpg's in any document--forget putting photos in emails.
    "Help" has been fairly useless; tutorials instruct to do things the programs won't do, or has no suggestion. 
    Pages is Useless, if it only allows making a basic document that's ONLY visible or minimally usable on the unit it got made on.
    Feartures hark back to antique MS Word, like having to go up to Edit in order to copy/paste [as in this message], instead of being able to use Mouse to copy/paste directly in document, for instance. 
    This computer refuses to allow printing via ethernet or hardwire; Mini sees there's a printer, but can't print, thinks it's not on, or some unknown blockage.
    Uninstalled printer, tried to reinstall, Mini refuses to allow reinstall; can't auto-find printer, refuses manual entry of information.
    This Mac nearly choked/crashed after updated to Mavericks, in many ways.
    MAYBE all this is really yet more Mavericks issues? ?
    I paid dearly to get a computer that SHOULD have been Stably ready to roll; instead, it's caused about 3+ months worth of time-wasting.
    This fails as a reliable, stable WORK unit.   
    Getting vetted, stable software should be easy, but it isn't. 
    ALL the problems APPEAR to be software issues. 
    This isn't just a Learning Curve, this is diabolical Sudoku gone horribly wrong!
    Microsoft historically, repeatedly, rushed unstable, incomaptible software to users before de-bugging/de-glitching, or issues incomplete licenses to ancillary programs making htem disfunctional:  it's what I've hated MOST about PC's. 
    IMHO, the contract that conjoined Mac with Microsoft seems to have caused Macs to take on the worst of PC habits. 
    This MacMess is turning my brain to mush!  Where do I send a BILL to Apple for premature onset of Dementia / Stressed-Brain injuries + Time Lost, related to bad computer software?! 
    At this rate, I'll never finish a book for publication anywhere, and must fall back on hand-writing forms and reports. 

    Thanks Peter--it is what I thought [return to Mountain Lion].
    Chi
    PS:  Contracts between Microsoft and Apple can be Googled; numerous things come up; could start here: 
    http://www.roughlydrafted.com/RD/RDM.Tech.Q1.07/592FE887-5CA1-4F30-BD62-407362B5 33B9.html
    It continued, with variations, later dates.
    Using "conjoined" was perhaps, not exactly the correct term.  But that contract changed how Macs operated; dependability has, IMHO [and others], declined, while PC's have gained some bits of dependability.
    Macs subsequently started using other processors, instead of Apple hardware--[not knowing how that might change things].
    There's been more of Apple rushing software to users prematurely; always a badly played Microsoft trick, for instance. 
    It has some hints that MS and Apple are becoming more homogenous; that would be sad. It will take longer than this, to accomplish; but this kind of contracts between industry giants, often portend that sort of merge at later date, done in a step-wise manner.  These kinds of things can take years longer than this; meanwhile, users deal with bad products. 

  • Creating NetRestore Image of OS X Yosemite (10.10) from Mac Mini Server Running Mavericks (10.9)

    Hello all,
    We are attempting to create a NetRestore image of a Macbook Pro running Yosemite (10.10) from a Mavericks (10.9) Mac Mini running OS X Server. Previously we connected a Macbook Pro in target mode to our Mac Mini (both running Mavericks) using System Image Utility to create a NetRestore SP0 from which we could deploy to all of the computers in our lab running Mavericks. We did this as a method to update the applications on each iMac locally from the hosted NetRestore image we created. We are now receiving several new iMacs and Mac Pros running Yosemite (10.10) native and we wish to use the same process to update these machines from our Mac Mini (Mavericks) running OS X Server.
    We are now trying create a NetRestore image from a native Yosemite Macbook Pro using System Image Utility on our Mac Mini (running Mavericks) however when the Yosemite Macbook Pro is connected in target mode, System Image Utility does not recognize the volume although it is recognized by our Mac mini (e.g., the yellow-orange image icon is displayed on the Mac Mini's desktop). Some of our lab computers are still running Mavericks, and my understanding is that Mavericks NetRestore Images cannot be created from a Mac Mini with OS X Server running Yosemite.
    Must we upgrade our Mac mini from Mavericks to Yosemite for System Image Utility to recognize our Yosemite Macbook Pro (connected in target mode) in order to create a Yosemite NetRestore Image?
    Note: We know there are better alternatives (e.g., Munki) to deploy updates to our machines via server and are working to establish a more convenient process, but this is the method we have been comfortable using before running into the above issue.
    Thanks all!

    You could use DeployStudio to 'serve' both Yosemite and Mavericks images from your Mac mini which can still run Mavericks. You would also use DeployStudio to make an image of the MacBook once it has been loaded and then this image can be restored to multiple machines.
    See http://www.deploystudio.com

  • Mac Mini Ethernet SSL connection issues

    Hi,
    Up until recently I have been using my Late 2012 Mac mini with a WiFi connection. Recently though I've had reason to switch to a Gigabit Ethernet connection (short version, moved from UK to Canada, living with in-laws and they have a crappy wireless router that can't hold a stable connection for more than a few hours).
    However, I'm getting a really odd Ethernet network issue where my mac will "corrupt" SSL connections. This normally manifests itself in web pages not fully downloading, images becoming corrupted, or errors when downloading files. The last one is particularly hurting as I have been doing some heavy downloading of DMG files and other installers, all of which are a 100% guaranteed fail with DMG files reporting as being corrupted if I try to open them.
    I have also lost my time machine backup as OSX has reported that this has failed verification and needs to be created new; I accepted creating a new one (reluctantly) and the backup now fails to complete every time it runs - either the wireless cuts out or the SSL connection corrupts the backup.
    I have a 16-port GigE Switch (Netgear GS116) with a number of computers and the home modem plugged into this.
    I've tried the following to look at this:
    I've tried (and tested) a number of different Cat5e and Cat6 cables. These all work fine with other Windows / Linux machines and according to my cable tester all check out. 100% of the cables I own produce the error leading me to believe that it's not a cable problem.
    Problem occurs even if the switch is bypassed and the mac plugged directly into the modem.
    Problem does not occur (for web pages and small downloads) when plugged into wireless - this is just sloooow and as the router seems to develop issues with DNS over WiFi, I have to reset it every few hours so long term downloads fail.
    I found an article (which I have now lost the URL for) where someone suffered intermittent network issues with Ethernet that they resolved by un-checking the "Enable automatic connection" on the 802.1X page of the network settings. This appeared to help for a couple of days and I enjoyed fast Ethernet and downloads once more. However, today the problem is back in force.
    I am able to download files from a windows machine (well, except for downloads via the App store) and then transfer them over the network to the mini with no problems at all - the corruption issue only seems to occur when SSL is involved.
    So I'm wondering what it could be and how I would go about diagnosing the issue. I'm more familiar with Windows / Linux systems, having not owned a Mac since the days of System 7 - the mini was bought so I could play with learning XCode and try my hand at Mac software development.
    Thanks in advance,
    ~MrBasset.
    Machine specs:
    Late 2012 Mac Mini running OXS Mavericks 10.9.3
    2.5Ghz Intel Core i5
    16GB Ram

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Impossible de mettre à jour mon Mac Book Air avec Mavericks. Pourquoi ? MacBook Air 13 ", mi-2011 Proc  1.7 GHz Intel Core i5 Mem  4 Go 1333 MHz DDR3 Graph  Intel HD Graphics 3000 384 MB N°  C02GDCBADJWT Logiciel  Mac OS X 10.7.5

    Impossible de mettre à jour mon Mac Book Air avec Mavericks. Pourquoi ? MacBook Air 13 ", mi-2011 Proc  1.7 GHz Intel Core i5 Mem  4 Go 1333 MHz DDR3 Graph  Intel HD Graphics 3000 384 MB N°  C02GDCBADJWT Logiciel  Mac OS X 10.7.5

    UPDATING post above.
    Excel slowing down is particularly when I do "copy" or "paste" (up to 3 seconds before the action is taken into account).
    I tried with empty or very small files, problem is the same.
    I checked autoupdates of Microsoft, everything is up to date.
    I made the test of David Linc, with no issue.
    Anyone having same situation or solution ?
    Thank you
    F.

  • Schockwave on mac OSX 10.9 Mavericks

    Hi,...
    Does anyone tried running Shockwave on that new OS ?
    Is it still not working ?

    Hi Imad
    This may not be a Mavericks issue.  We've had a small number of Mac users (including me) hit a lock up with 12.1.2 similar to what you've described on Mountain Lion and we've not been able to reproduce it consistently yet.
    Can I get you to do me 4 things please?:
    Launch JDeveloper from <jdev_home>/jdeveloper/jdev/jdev (this will open a terminal window to run JDev from)
    a) Repeat the cause of the issue.  Once JDev has locked up, without closing it down, in the terminal window that is running JDev type "Ctrl \".  This will produce a full thread dump.  Copy the complete contents to a file.
    b) Via your Apple menu -> About this Mac -> More Info -> System Report option, select Print, then print/save the output to a PDF file.  This will give us a complete dump of your machine's configuration.
    *Please note that this will likely reveal information about you as an individual.  It's my intention to place that output in the internal bug tracking this issue so the developers can check your Mac's configuration.  If you're not comfortable with that, we can instead get you to lodge an SR with Oracle Support who have the requisite privacy policies in place.  Your call*
    c) Email both files to me at chris DOT muir AT oracle DOT com, or alternatively place them on DropBox or similar and just send me links.
    d) Update this thread to say you've posted the content, which if it gets blocked by a firewall I'll know to chase this up.
    Finally there is a work around which isn't ideal, simply don't open the pages in Design/Preview mode.  Via Preferences -> File Types you can change the default behaviour when opening a file so it shows source code instead.
    Thanks & regards,
    Chris Muir
    ADF Product Management

  • Why does my Mac Mini running on Mavericks so slow to start and load apps?

    Why does my Mac Mini running on Mavericks take so long to start and load apps?

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
    Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,[lps]*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-  
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    7. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    8. If you see an error message in the Terminal window such as "syntax error," enter
    exec bash
    and press return. Then paste the script again.
    9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • My iphone 4s and ipad 2 both with 7.0.4 update will no longer connect to wifi but non-mac lap top has no issues

    my iphone 4s and ipad2 both with 7.0.4 update will no longer connect to wifi.
    About three days ago the ability to connect came and went and the connection never lasted more than 10-15 minutes; it has not been able to connect since last night. I do not think it's my wifi router as non-mac lap top has no issues. I have seem many similar questions posted.

    Reboot your router by removing all power from it for about 15 seconds. Also, if your router still has its default SSID (such as LINKSYS, DLINK, NETGEAR, etc) change the SSID to something unique. Note that all other devices on your network will have to be reconnected if you change the name, but if the name is still the default that is most likely your problem.
    If the SSID is not the default then the reboot should fix it.

  • Hi, I have a mac book pro running mavericks and recently tried to connect to a 3rd ten apple tv but the airplay icon is not showing up in the top bar. I then tried my girlfriends laptop running mountain lion and it showed up straight away. Any suggestions

    Hi, I have a mac book pro running mavericks and recently tried to connect to a 3rd gen apple tv but the airplay icon is not showing up in the top bar. I then tried my girlfriends laptop running mountain lion and it showed up straight away. Any suggestions?

    How old is the MacBook Pro?  AirPlay is only supported on 2011 and newer models, due to the requirements it has in hardware for graphics acceleration.

  • Getting problem while installing Snow Leopard (10.6.3) on my Mac Mini. The following issue is showing :  "mac os x snow leopard cannot be installed on this computer"  And My Mac Configuration details:  Model Name: Mac Mini Model Identifier: Macmini2,1

    Getting problem while installing Snow Leopard (10.6.3) on my Mac Mini. The following issue is showing : 
    "mac os x snow leopard cannot be installed on this computer" 
    And My Mac Configuration details:  Model Name: Mac Mini Model Identifier: Macmini2,1
    Intel Core 2 Duo
    1.83Ghz
    l2Cache: 2mb
    Memory : 2GB
    Bus Speed: 667MHz
    Please help me......
    Thanks

    Actually i have Mac OS X 10.5.4 DVD, I need to upgrade it to Snow Loepard(OS X 10.6)...
    Please suggest me what to do???
    Thanks

  • Does Your Disk Utility App Stop Running Under Mac OS 10.9 - Mavericks

    I am using a 2012 MacBook Air running Mac OS 10.9 - Mavericks. The Disk Utility app Verify function stops running, most often during the "Checking Volume Information" part of the test, and does not display any results. The app does not crash: I can run Verify over and over. The app simply stops running. Does anyone else have this problem?

    I have a Drobo (2nd Gen) attached to my early 2009 Mac Pro via Firewire and it consistently has this problem with the Disk Utility app on Mavericks.
    Maybe there's a timeout on the Disk Utility.
    It seems that diskutil and fsck on the command line work.
    First, get the device identifier for the volume you want to check:
    bash-3.2$ diskutil list /Volumes/Drobo
    /dev/disk5
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *17.6 TB    disk5
       1:                        EFI EFI                     209.7 MB   disk5s1
       2:                  Apple_HFS Drobo                   17.6 TB    disk5s2
    then, use diskutil to  verify the volume:
    bash-3.2$ sudo diskutil verifyVolume /dev/disk5s2
    Started file system verification on disk5s2 Drobo
    Checking file system
    Checking Journaled HFS Plus volume
    Checking extents overflow file
    Checking catalog file
    Checking multi-linked files
    Checking catalog hierarchy
    Checking extended attributes file
    Checking volume bitmap
    Checking volume information
    The volume Drobo appears to be OK
    Finished file system verification on disk5s2 Drobo
    You can also use fsck in debug mode if you like more verbose output. Here I first unmount and then use the raw device:
    root# diskutil umount /Volumes/Drobo
    Volume Drobo on disk5s2 unmounted
    root# fsck_hfs -d -l -f  /dev/rdisk5s2
    ** /dev/rdisk5s2 (NO WRITE)
            Using cacheBlockSize=32K cacheTotalBlock=98304 cacheSize=3145728K.
       Executing fsck_hfs (version hfs-226.1.1).
    ** Performing live verification.
    ** Checking Journaled HFS Plus volume.
       The volume name is Drobo
    ** Checking extents overflow file.
    ** Checking catalog file.
    ** Checking multi-linked files.
    ** Checking catalog hierarchy.
    ** Checking extended attributes file.
    ** Checking volume bitmap.
    ** Checking volume information.
    ** The volume Drobo appears to be OK.
            CheckHFS returned 0, fsmodified = 0
    Then remount:
    root# diskutil mount /dev/disk5s2 
    Volume Drobo on /dev/disk5s2 mounted
    You should really read the fsck man page if you go this route. There are many options and many ways you could accidentally do something you don't intend to do.
    Enjoy!
    ~f

  • I upgraded my Mac OS X to Mavericks and MP Navigator 2 app crashes with my Canon Pixma MP170 printer

    I upgraded my Mac OS X to Mavericks and my old software MP Navigator 2.0 crashes every time I launch it. I have Canon PIXMA MP 170 printer/scanner...
    Problem details:
    Process:         MP Navigator [14307]
    Path:            /Applications/MP Navigator 2.0.app/Contents/Resources/MP Navigator.app/Contents/MacOS/MP Navigator
    Identifier:      jp.co.canon.bj.printer.app.module.MPN207
    Version:         Version 2.0.7 (2.0.7)
    Build Info:      MP Navigator 2.0-2~2
    Code Type:       X86 (Native)
    Parent Process:  ??? [1]
    Responsible:     MP Navigator [14307]
    User ID:         501
    Date/Time:       2014-08-24 22:15:24.608 -0700
    OS Version:      Mac OS X 10.9.4 (13E28)
    Report Version:  11
    Anonymous UUID:  3ACA50D0-8081-3AB9-7627-EF1630FDE424
    Sleep/Wake UUID: 01607948-3A0C-44C9-B276-7D55D85E068C
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    *** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '-[NSImageCell loadingState]: unrecognized selector sent to instance 0x6d05490'
    Does anyone experienced this problem?
    I installed Easy-PhotoPrint EX but it doesn't have scanner capability... which software/driver should be installed.
    Thanks in advance.

    Hi ishmakov,
    The PIXMA MP170 is not supported with Mac OSX v10.9, that is why you are experiencing this error.
    To discuss your options, please contact our support group using the following link:
    http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Can't restore my iPhone 3gs. Tried 4 different Macs and 1 PC, all issue error response, mostly

    can't restore my iPhone 3gs. Tried 4 different Macs and 1 PC, all issue error response, mostly errror 2001 snd the PC cited error #21. Even tried different USB cable.
    It started by not turning on and it still does not unless plugged in. Then once it displayed a colorless grey screen that said "no service" and the battery symbol said 100 %. After resetting the iPhone it now is recognized as an iPhone in recovery mode.

    sounds like it's time to bring your phone in for evaluation

  • Does anyone know if Photoshop Elements 9 for the Mac is compatible with Mavericks?

    Does anyone know if Photoshop Elements 9 for the Mac is compatible with Mavericks?

    Yes, but it is absolutely critical to delete all existing preferences after upgrading to 10.9.
    I'm running PSE 6, 8, 9, 10, 11, and 12 in 10.9. PSE 11 has a slight problem (with a couple of filters) but otherwise it all works.

Maybe you are looking for