Mac OS services failure

this is for an iMac flat panel display
after installing many upgrades and rebooting get black screen error"kernal panic cant find driver for ACPI.....jan 3-2006 kernal"
Iv tried 4 or 5 rescue CDs, repaired permissions,even Disk warrior 4.0 wont repair,says "Disk warrior 4 rebuilt directory,but cannot replace due to a mac OS services failure"
HELP??
mac OS services failure

Hello again:
If DW cannot repair the problem, you need to either reinstall OS X (if you are able, I would use an archive and install) or take the computer to either an Apple store or to an Apple-certified technician for help.
Barry

Similar Messages

Disk Warrior - Mac OS Services Failure

Having used DW 4.4 on a Mountain Lion Macbook I am unable to replace the rebuilt directory with the above warning. Any ideas how to combat this?
Regards

Try this, from a post on another site:
If an application on OS X has damaged the Journaling data, then when you try to run Disk Warrior, you may get this error:the new directory cannot replace the original directory due to a mac os services failure. You may be able to work around this problem by temporarily turning off Journaling via Disk Utility:
Open Disk Utility
Select the Volume of the drive
Hold down the Option key on the keyboard
Go to the File menu – select Disable Journaling
Now run Disk Warrior again. Afterwards, you can turn back journaling.
If you continue to have problems, you may need to clone or backup the drive to an external, reformat the internal drive, and clone back or reinstall Mac OS X and restore your data. Alsoft may have additional suggestions.
Regards.

SCCM 2012 SP1 - Offline Servicing failure - Failed to find or access the update binaries to be applied on the image

Hi there
Trying to patch a new Windows 7 SP1 image within SCCM 2012 SP1, but it's failing.
I've searched for information on the failure messages I am seeing, but although there is a LOT of information online concerning Offline Servicing failures, I can't find anything on the errors I am seeing.
I've tried injecting a single update, five updates and ten updates, no difference, same messages.
We have McAfee Access Protection disabled, as we know Offline Servicing simply won't work if this is running.
In the console, in Schedule Update Status for the image I am trying to update, the following message is shown:
"Failed to find or access the update binaries to be applied on the image."
That sounds as if the process can't find the actual .cab file for any update I've tried to inject, but I don't know why it wouldn't be able to do that, we have Software Updates configured and the .cab files are on the same server.
When I looked at the OfflineServicingMgr.log file, I see the following entries:
Processing image at index 1        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:52:49        8272 (0x2050)
Mounting image at index 1. Image file='D:\ConfigMgr_OfflineImageServicing\PackageID\W7_Image.wim', MountDirectory='D:\ConfigMgr_OfflineImageServicing\PackageID\ImageMountDir', ImageFileType='WIM', Mode='ReadWrite'        SMS_OFFLINE_SERVICING_MANAGER
14/06/2014 14:52:49        8272 (0x2050)
Image OS information : MajorVersionMS = 6, MinorVersionMS = 1, MajorVersionLS = 7601, MinorVersionLS = 17514        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:53:31
8272 (0x2050)
Failed to find properties of file 4        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:53:31        8272 (0x2050)
UnMounting Image (Commit Changes = 0) ...        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:53:31        8272 (0x2050)
Completed processing image package PackageID. Status = Failed        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:54:04        8272 (0x2050)
Updated history for image package PackageID in the database        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:54:04        8272 (0x2050)
Schedule processing failed        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:54:04        8272 (0x2050)
Processing completed for Schedule with ID 16777237        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:54:04        8272 (0x2050)
STATMSG: ID=7910 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_OFFLINE_SERVICING_MANAGER" SYS=SCCMServer.domain SITE=Site_Code PID=8560 TID=8272 GMTDATE=Sat Jun 14 13:54:04.964 2014 ISTR0="16777237" ISTR1="" ISTR2=""
ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0        SMS_OFFLINE_SERVICING_MANAGER
14/06/2014 14:54:04        8272 (0x2050)
Schedule processing thread stopped        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:54:05        8272 (0x2050)
I'm not sure what file "Failed to find properties of file 4" is referring to, whether dism.exe, an update or the image itself, but immediately after this message appears the image is unmounted. After that this message shows:
"Completed processing image package PackageID. Status = Failed"
As I say, there's a lot of information available re Offline Servicing but I haven't found anything with these particular messages.
If anyone has encountered this before, I'd appreciate any information you have.
Regards,
John.

Hi,
I think file named 'NO_SMS_ON_DRIVE.SMS’ might be causing this issue. If this file is present in logical drives, then please give it a shot one more time after deleting this file from the logical drives.
Due to this file, it might be preventing 'smsexec' service to skip the drive when looking for content. So worth a try!
After deleting this file, you also need to restart 'smsexec' service to reflect the changes. You can also verify from below registry value & ensure that all of your logical drives (specially where SCCMContentLib directory resides) should be listed
over there
'HKLM\Software\Microsoft\SMS\DP\ContentLibUsableDrives'
Hope this will help!
Cheers | Navdeep Sidhu

Photoshop Elements 10 Mac Ongoing Install Failure - Exit Code 7

Photoshop Elements 10 Mac Ongoing Install Failure - Exit Code 7
I downloaded Photoshop Elements 10 for Mac (not trial, with valid serial #)
Mac OSX 10.7.2, 3.6 GHz Intel Core i5, 16 GB RAM
I know the install package is valid because I installed it on my backup laptop (same Max OSX version) after I was having problems with my primary desktop and it installed fine. I have followed all the instructions on the install package including "restarting my system and installing again," and the install keeps failing with the same message:
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 18 error(s), 3 warning(s)
WARNING: DS013: Payload {298CF0B0-8B47-46DF-B726-8E4BFAD5432E} AdobeHelp 1.0.0.0 is already installed and the session payload {EB3A47AA-B4E2-4857-A69C-92A6E097F24C} AdobeHelp 3.5.0.0 has no upgrade/conflict relationship with it.
WARNING: DS013: Payload {75063C76-E858-455B-9C26-89E55D26F276} AdobeHelp 3.2.0.0 is already installed and the session payload {EB3A47AA-B4E2-4857-A69C-92A6E097F24C} AdobeHelp 3.5.0.0 has no upgrade/conflict relationship with it.
ERROR: DS013: Verifying payload integrity : Failed with code 1
----------- Payload: {60CB5C6D-5B99-45D3-BAB5-E7728182101E} Adobe Photoshop Elements 10 10.0.0.0 -----------
ERROR: DF024: Unable to preserve original file at "/Library/Fonts/BickhamScriptPro-Regular.otf" Error 0(Seq 1519)
ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 1519)
ERROR: DF023: Unable to delete file "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents/Info.plist". Error 0(Seq 2)
ERROR: DW063: Error rolling back command ARKCopyFileCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF015: Unable to delete symlink "/Applications/Adobe Photoshop Elements 10/Adobe Photoshop Elements 10"(Seq 1)
ERROR: DW063: Error rolling back command ARKCopySymlinkCommand(Seq 1)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10"(Seq 1)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 1)
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Photoshop Elements 10: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Photoshop Elements 10_AdobePhotoshopElements10_en_US: Install failed
Suggestions? thanks.

Issue resolved with the help of Adobe Support (Mercer). My problem had been seen in another machine, there were empty folders in the Fonts Folder (Hard Drive>Library>Fonts) that the installer could not reconcile or delete, that was hanging up the Installer.
My fix was to delete the following empty folders from the Fonts Folder:
AdobeMingStd-Light.otf
BickhamScriptPro-Regular.otf
KozMinPro-Regular.otf
MyriadPro-BoldCond.otf
TektonPro-BoldCond.otf
And then re-run the installer (be sure to empty the trash).
My advice would be to first read the installer log and look for names of font folders that could not be resolved, then dump those. Another way would be to dump any empty folders in the Fonts Folder, empty the trash, then re-sun the installer.

Bea.jolt.ApplicationException:TPESVCFAIL-application level service failure

Hi All,
When I try to open PIA 3 tier I'm getting following error on webpage: "bea.jolt.ApplicationException: TPESVCFAIL - application level service failure".
Thanks and Regards,
Vineel.

This is a very generic error
See this doc for possible causes and resolutions.
E-AS: Master Note for "'bea.jolt.ApplicationException: TPESVCFAIL" Error [ID 1201223.1]
https://support.oracle.com/epmos/faces/DocContentDisplay?id=1201223.1

Systemd-tmpfiles-setup.service failure

Good evening friends.
I recently made a fresh install of arch linux on my pc and since the first boot up i get this error:
systemd-tmpfiles-setup.service failure
Failded to start create volatile files and directories
When i used "systemctl status" command on it, it said something about unkwnon groups in usr/lib/... somewhere, i can't remember all of it, because after i rebooted and tried the same command, it only said that the process failed, without giving much on details.
What might be the problem here?
Last edited by NotaName (2014-09-14 17:42:37)

falconindy wrote:
Just a guess, but I think you might have some unknown groups in usr/lib/... somewhere.
You'll really need to try harder to get the logs. They're still in the journal.
Thanks for the answer.
Well, i'm still working on the log finding part, as i'm not sure where they are supposed to be. I checked the /var/log folder files, but it seems that they are not readable/binary maybe?
P.S. Is this something that i might ignore if i don't find a way to fix it?
Last edited by NotaName (2014-09-14 19:36:47)

External Service Failure: There was no Content-Type header

We have developed a web service using WLW and deployed it to weblogic 8.1 (install from scratch), we manage to invoke the service successfully. However, when we deploy it to the weblogic 8.1 server installed through PeopleSoft PIA , we keep getting the 'External Service Failure: There was no Content-Type header' error.
Does anyone know what are the differences for the weblogic installed through PeopleSoft PIA or how we can get around the error? Thanks!

Hi Jerioon,
Which Master Page and Content Type did you use when you created a new page layout with Designer Manager?
Whether you could provide a screenshot about this issue.
In addition, here is an article about creating a page layout with Designer Manager, please take a look at:
http://www.learningsharepoint.com/2013/03/03/create-a-custom-page-layout-in-sharepoint-2013/
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Tuxedo calls procedure and Application Level Service Failure

hello ,professors all!
My Tuxedo Service just call an procedure exists in oracle9i, i am sure that the procedure runs ok in oracle9i individually, when it was called by my tuxedo service , it is not ok by first time ,and runs out tp application level Service failure error .But strangely it is ok by second time！
who can explan it to me and show me a way to solve the difficult problem?
i spend a lot time wondering the answer!
Edited by: user9086437 on 2010-9-29 下午9:57

There are many possible reasons why a database procedure might fail the first time it is executed and succeed after that.
You should check the Tuxedo ULOG and Oracle database logs for any messages that may point to the problem.
If there is a LIBTUX_CAT:6205 or LIBTUX_CAT:6206 message in the userlog file then you need to add a tx_open() call to your server's tpsvrinit() or tpsvrthrinit() function.
If there is an OPENINFO string for the group where your server is running then you are using XA transaction management and should not be connecting to the database in your application code; if there is not an OPENINFO string for the group where your server is running then you need to connect to the database in your application.
If you set the environment variable
TMTRACE=*:ulog:dye
for the server where the failure is happening then Tuxedo will write a trace record of each Tuxedo call and each XA call to the ULOG file. This can be helpful in determining why the failure is happening on the first call, especially if Tuxedo is handling transaction management using XA.
I hope some of this is of help in debugging the problem.
Ed

Error: Halting this cluster node due to unrecoverable service failure

Our cluster has experienced some sort of fault that has only become apparent today. The origin appears to have been nearly a month ago yet the symptoms have only just manifested.
The node in question is a standalone instance running a DistributedCache service with local storage. It output the following to stdout on Jan-22:
Coherence <Error>: Halting this cluster node due to unrecoverable service failure
It finally failed today with OutOfMemoryError: Java heap space.
We're running coherence-3.5.2.jar.
Q1: It looks like this node failed on Jan-22 yet we did not notice. What is the best way to monitor node health?
Q2: What might the root cause be for such a fault?
I found the following in the logs:
2011-01-22 01:18:58,296 Coherence Logger@9216774 3.5.2/463 ERROR 2011-01-22 01:18:58.296/9910749.462 Oracle Coherence EE 3.5.2/463 <Error> (thread=Cluster, member=33): Attempting recovery (due to soft timeout) of Guard{Daemon=DistributedCache}
2011-01-22 01:18:58,296 Coherence Logger@9216774 3.5.2/463 ERROR 2011-01-22 01:18:58.296/9910749.462 Oracle Coherence EE 3.5.2/463 <Error> (thread=Cluster, member=33): Attempting recovery (due to soft timeout) of Guard{Daemon=DistributedCache}
2011-01-22 01:19:04,772 Coherence Logger@9216774 3.5.2/463 ERROR 2011-01-22 01:19:04.772/9910755.938 Oracle Coherence EE 3.5.2/463 <Error> (thread=Cluster, member=33): Terminating guarded execution (due to hard timeout) of Guard{Daemon=DistributedCache}
2011-01-22 01:19:04,772 Coherence Logger@9216774 3.5.2/463 ERROR 2011-01-22 01:19:04.772/9910755.938 Oracle Coherence EE 3.5.2/463 <Error> (thread=Cluster, member=33): Terminating guarded execution (due to hard timeout) of Guard{Daemon=DistributedCache}
2011-01-22 01:19:05,785 Coherence Logger@9216774 3.5.2/463 ERROR 2011-01-22 01:19:05.785/9910756.951 Oracle Coherence EE 3.5.2/463 <Error> (thread=Termination Thread, member=33): Full Thread Dump
Thread[Reference Handler,10,system]
java.lang.Object.wait(Native Method)
java.lang.Object.wait(Object.java:485)
java.lang.ref.Reference$ReferenceHandler.run(Reference.java:116)
Thread[DistributedCache,5,Cluster]
java.nio.Bits.copyToByteArray(Native Method)
java.nio.DirectByteBuffer.get(DirectByteBuffer.java:224)
com.tangosol.io.nio.ByteBufferInputStream.read(ByteBufferInputStream.java:123)
java.io.DataInputStream.readFully(DataInputStream.java:178)
java.io.DataInputStream.readFully(DataInputStream.java:152)
com.tangosol.util.Binary.readExternal(Binary.java:1066)
com.tangosol.util.Binary.<init>(Binary.java:183)
com.tangosol.io.nio.BinaryMap$Block.readValue(BinaryMap.java:4304)
com.tangosol.io.nio.BinaryMap$Block.getValue(BinaryMap.java:4130)
com.tangosol.io.nio.BinaryMap.get(BinaryMap.java:377)
com.tangosol.io.nio.BinaryMapStore.load(BinaryMapStore.java:64)
com.tangosol.net.cache.SerializationPagedCache$WrapperBinaryStore.load(SerializationPagedCache.java:1547)
com.tangosol.net.cache.SerializationPagedCache$PagedBinaryStore.load(SerializationPagedCache.java:1097)
com.tangosol.net.cache.SerializationMap.get(SerializationMap.java:121)
com.tangosol.net.cache.SerializationPagedCache.get(SerializationPagedCache.java:247)
com.tangosol.net.cache.AbstractSerializationCache$1.getOldValue(AbstractSerializationCache.java:315)
com.tangosol.net.cache.OverflowMap$Status.registerBackEvent(OverflowMap.java:4210)
com.tangosol.net.cache.OverflowMap.onBackEvent(OverflowMap.java:2316)
com.tangosol.net.cache.OverflowMap$BackMapListener.onMapEvent(OverflowMap.java:4544)
com.tangosol.util.MultiplexingMapListener.entryDeleted(MultiplexingMapListener.java:49)
com.tangosol.util.MapEvent.dispatch(MapEvent.java:214)
com.tangosol.util.MapEvent.dispatch(MapEvent.java:166)
com.tangosol.util.MapListenerSupport.fireEvent(MapListenerSupport.java:556)
com.tangosol.net.cache.AbstractSerializationCache.dispatchEvent(AbstractSerializationCache.java:338)
com.tangosol.net.cache.AbstractSerializationCache.dispatchPendingEvent(AbstractSerializationCache.java:321)
com.tangosol.net.cache.AbstractSerializationCache.removeBlind(AbstractSerializationCache.java:155)
com.tangosol.net.cache.SerializationPagedCache.removeBlind(SerializationPagedCache.java:348)
com.tangosol.util.AbstractKeyBasedMap$KeySet.remove(AbstractKeyBasedMap.java:556)
com.tangosol.net.cache.OverflowMap.removeInternal(OverflowMap.java:1299)
com.tangosol.net.cache.OverflowMap.remove(OverflowMap.java:380)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$Storage.clear(DistributedCache.CDB:24)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache.onClearRequest(DistributedCache.CDB:32)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ClearRequest.run(DistributedCache.CDB:1)
com.tangosol.coherence.component.net.message.requestMessage.DistributedCacheRequest.onReceived(DistributedCacheRequest.CDB:12)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onMessage(Grid.CDB:9)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onNotify(Grid.CDB:136)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache.onNotify(DistributedCache.CDB:3)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
java.lang.Thread.run(Thread.java:619)
Thread[Finalizer,8,system]
java.lang.Object.wait(Native Method)
java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:118)
java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:134)
java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:159)
Thread[PacketReceiver,7,Cluster]
java.lang.Object.wait(Native Method)
com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketReceiver.onWait(PacketReceiver.CDB:2)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
java.lang.Thread.run(Thread.java:619)
Thread[RMI TCP Accept-0,5,system]
java.net.PlainSocketImpl.socketAccept(Native Method)
java.net.PlainSocketImpl.accept(PlainSocketImpl.java:390)
java.net.ServerSocket.implAccept(ServerSocket.java:453)
java.net.ServerSocket.accept(ServerSocket.java:421)
sun.rmi.transport.tcp.TCPTransport$AcceptLoop.executeAcceptLoop(TCPTransport.java:369)
sun.rmi.transport.tcp.TCPTransport$AcceptLoop.run(TCPTransport.java:341)
java.lang.Thread.run(Thread.java:619)
Thread[PacketSpeaker,8,Cluster]
java.lang.Object.wait(Native Method)
com.tangosol.coherence.component.util.queue.ConcurrentQueue.waitForEntry(ConcurrentQueue.CDB:16)
com.tangosol.coherence.component.util.queue.ConcurrentQueue.remove(ConcurrentQueue.CDB:7)
com.tangosol.coherence.component.util.Queue.remove(Queue.CDB:1)
com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketSpeaker.onNotify(PacketSpeaker.CDB:62)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
java.lang.Thread.run(Thread.java:619)
Thread[Logger@9216774 3.5.2/463,3,main]
java.lang.Object.wait(Native Method)
com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
java.lang.Thread.run(Thread.java:619)
Thread[PacketListener1,8,Cluster]
java.net.PlainDatagramSocketImpl.receive0(Native Method)
java.net.PlainDatagramSocketImpl.receive(PlainDatagramSocketImpl.java:136)
java.net.DatagramSocket.receive(DatagramSocket.java:712)
com.tangosol.coherence.component.net.socket.UdpSocket.receive(UdpSocket.CDB:20)
com.tangosol.coherence.component.net.UdpPacket.receive(UdpPacket.CDB:4)
com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketListener.onNotify(PacketListener.CDB:19)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
java.lang.Thread.run(Thread.java:619)
Thread[main,5,main]
java.lang.Object.wait(Native Method)
com.tangosol.net.DefaultCacheServer.main(DefaultCacheServer.java:79)
com.networkfleet.cacheserver.Launcher.main(Launcher.java:122)
Thread[Signal Dispatcher,9,system]
Thread[RMI TCP Accept-41006,5,system]
java.net.PlainSocketImpl.socketAccept(Native Method)
java.net.PlainSocketImpl.accept(PlainSocketImpl.java:390)
java.net.ServerSocket.implAccept(ServerSocket.java:453)
java.net.ServerSocket.accept(ServerSocket.java:421)
sun.rmi.transport.tcp.TCPTransport$AcceptLoop.executeAcceptLoop(TCPTransport.java:369)
sun.rmi.transport.tcp.TCPTransport$AcceptLoop.run(TCPTransport.java:341)
java.lang.Thread.run(Thread.java:619)
ThreadCluster
java.lang.Object.wait(Native Method)
com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onWait(Grid.CDB:9)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
java.lang.Thread.run(Thread.java:619)
Thread[TcpRingListener,6,Cluster]
java.net.PlainSocketImpl.socketAccept(Native Method)
java.net.PlainSocketImpl.accept(PlainSocketImpl.java:390)
java.net.ServerSocket.implAccept(ServerSocket.java:453)
java.net.ServerSocket.accept(ServerSocket.java:421)
com.tangosol.coherence.component.net.socket.TcpSocketAccepter.accept(TcpSocketAccepter.CDB:18)
com.tangosol.coherence.component.util.daemon.TcpRingListener.acceptConnection(TcpRingListener.CDB:10)
com.tangosol.coherence.component.util.daemon.TcpRingListener.onNotify(TcpRingListener.CDB:9)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
java.lang.Thread.run(Thread.java:619)
Thread[PacketPublisher,6,Cluster]
java.lang.Object.wait(Native Method)
com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketPublisher.onWait(PacketPublisher.CDB:2)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
java.lang.Thread.run(Thread.java:619)
Thread[RMI TCP Accept-0,5,system]
java.net.PlainSocketImpl.socketAccept(Native Method)
java.net.PlainSocketImpl.accept(PlainSocketImpl.java:390)
java.net.ServerSocket.implAccept(ServerSocket.java:453)
java.net.ServerSocket.accept(ServerSocket.java:421)
sun.management.jmxremote.LocalRMIServerSocketFactory$1.accept(LocalRMIServerSocketFactory.java:34)
sun.rmi.transport.tcp.TCPTransport$AcceptLoop.executeAcceptLoop(TCPTransport.java:369)
sun.rmi.transport.tcp.TCPTransport$AcceptLoop.run(TCPTransport.java:341)
java.lang.Thread.run(Thread.java:619)
Thread[PacketListenerN,8,Cluster]
java.net.PlainDatagramSocketImpl.receive0(Native Method)
java.net.PlainDatagramSocketImpl.receive(PlainDatagramSocketImpl.java:136)
java.net.DatagramSocket.receive(DatagramSocket.java:712)
com.tangosol.coherence.component.net.socket.UdpSocket.receive(UdpSocket.CDB:20)
com.tangosol.coherence.component.net.UdpPacket.receive(UdpPacket.CDB:4)
com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketListener.onNotify(PacketListener.CDB:19)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
java.lang.Thread.run(Thread.java:619)
Thread[Invocation:Management,5,Cluster]
java.lang.Object.wait(Native Method)
com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onWait(Grid.CDB:9)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
java.lang.Thread.run(Thread.java:619)
Thread[DistributedCache:PofDistributedCache,5,Cluster]
java.lang.Object.wait(Native Method)
com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onWait(Grid.CDB:9)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
java.lang.Thread.run(Thread.java:619)
Thread[Invocation:Management:EventDispatcher,5,Cluster]
java.lang.Object.wait(Native Method)
com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
com.tangosol.coherence.component.util.daemon.queueProcessor.Service$EventDispatcher.onWait(Service.CDB:7)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
java.lang.Thread.run(Thread.java:619)
Thread[Termination Thread,5,Cluster]
java.lang.Thread.dumpThreads(Native Method)
java.lang.Thread.getAllStackTraces(Thread.java:1487)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:597)
com.tangosol.net.GuardSupport.logStackTraces(GuardSupport.java:791)
com.tangosol.coherence.component.net.Cluster.onServiceFailed(Cluster.CDB:5)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid$Guard.terminate(Grid.CDB:17)
com.tangosol.net.GuardSupport$2.run(GuardSupport.java:652)
java.lang.Thread.run(Thread.java:619)
2011-01-22 01:19:05,785 Coherence Logger@9216774 3.5.2/463 ERROR 2011-01-22 01:19:05.785/9910756.951 Oracle Coherence EE 3.5.2/463 <Error> (thread=Termination Thread, member=33): Full Thread Dump
Thread[Reference Handler,10,system]
java.lang.Object.wait(Native Method)
java.lang.Object.wait(Object.java:485)
java.lang.ref.Reference$ReferenceHandler.run(Reference.java:116)
Thread[DistributedCache,5,Cluster]
java.nio.Bits.copyToByteArray(Native Method)
java.nio.DirectByteBuffer.get(DirectByteBuffer.java:224)
com.tangosol.io.nio.ByteBufferInputStream.read(ByteBufferInputStream.java:123)
java.io.DataInputStream.readFully(DataInputStream.java:178)
java.io.DataInputStream.readFully(DataInputStream.java:152)
com.tangosol.util.Binary.readExternal(Binary.java:1066)
com.tangosol.util.Binary.<init>(Binary.java:183)
com.tangosol.io.nio.BinaryMap$Block.readValue(BinaryMap.java:4304)
com.tangosol.io.nio.BinaryMap$Block.getValue(BinaryMap.java:4130)
com.tangosol.io.nio.BinaryMap.get(BinaryMap.java:377)
com.tangosol.io.nio.BinaryMapStore.load(BinaryMapStore.java:64)
com.tangosol.net.cache.SerializationPagedCache$WrapperBinaryStore.load(SerializationPagedCache.java:1547)
com.tangosol.net.cache.SerializationPagedCache$PagedBinaryStore.load(SerializationPagedCache.java:1097)
com.tangosol.net.cache.SerializationMap.get(SerializationMap.java:121)
com.tangosol.net.cache.SerializationPagedCache.get(SerializationPagedCache.java:247)
com.tangosol.net.cache.AbstractSerializationCache$1.getOldValue(AbstractSerializationCache.java:315)
com.tangosol.net.cache.OverflowMap$Status.registerBackEvent(OverflowMap.java:4210)
com.tangosol.net.cache.OverflowMap.onBackEvent(OverflowMap.java:2316)
com.tangosol.net.cache.OverflowMap$BackMapListener.onMapEvent(OverflowMap.java:4544)
com.tangosol.util.MultiplexingMapListener.entryDeleted(MultiplexingMapListener.java:49)
com.tangosol.util.MapEvent.dispatch(MapEvent.java:214)
com.tangosol.util.MapEvent.dispatch(MapEvent.java:166)
com.tangosol.util.MapListenerSupport.fireEvent(MapListenerSupport.java:556)
com.tangosol.net.cache.AbstractSerializationCache.dispatchEvent(AbstractSerializationCache.java:338)
com.tangosol.net.cache.AbstractSerializationCache.dispatchPendingEvent(AbstractSerializationCache.java:321)
com.tangosol.net.cache.AbstractSerializationCache.removeBlind(AbstractSerializationCache.java:155)
com.tangosol.net.cache.SerializationPagedCache.removeBlind(SerializationPagedCache.java:348)
com.tangosol.util.AbstractKeyBasedMap$KeySet.remove(AbstractKeyBasedMap.java:556)
com.tangosol.net.cache.OverflowMap.removeInternal(OverflowMap.java:1299)
com.tangosol.net.cache.OverflowMap.remove(OverflowMap.java:380)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$Storage.clear(DistributedCache.CDB:24)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache.onClearRequest(DistributedCache.CDB:32)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ClearRequest.run(DistributedCache.CDB:1)
com.tangosol.coherence.component.net.message.requestMessage.DistributedCacheRequest.onReceived(DistributedCacheRequest.CDB:12)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onMessage(Grid.CDB:9)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onNotify(Grid.CDB:136)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache.onNotify(DistributedCache.CDB:3)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
java.lang.Thread.run(Thread.java:619)
Thread[Finalizer,8,system]
java.lang.Object.wait(Native Method)
java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:118)
java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:134)
java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:159)
Thread[PacketReceiver,7,Cluster]
java.lang.Object.wait(Native Method)
com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketReceiver.onWait(PacketReceiver.CDB:2)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
java.lang.Thread.run(Thread.java:619)
Thread[RMI TCP Accept-0,5,system]
java.net.PlainSocketImpl.socketAccept(Native Method)
java.net.PlainSocketImpl.accept(PlainSocketImpl.java:390)
java.net.ServerSocket.implAccept(ServerSocket.java:453)
java.net.ServerSocket.accept(ServerSocket.java:421)
sun.rmi.transport.tcp.TCPTransport$AcceptLoop.executeAcceptLoop(TCPTransport.java:369)
sun.rmi.transport.tcp.TCPTransport$AcceptLoop.run(TCPTransport.java:341)
java.lang.Thread.run(Thread.java:619)
Thread[PacketSpeaker,8,Cluster]
java.lang.Object.wait(Native Method)
com.tangosol.coherence.component.util.queue.ConcurrentQueue.waitForEntry(ConcurrentQueue.CDB:16)
com.tangosol.coherence.component.util.queue.ConcurrentQueue.remove(ConcurrentQueue.CDB:7)
com.tangosol.coherence.component.util.Queue.remove(Queue.CDB:1)
com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketSpeaker.onNotify(PacketSpeaker.CDB:62)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
java.lang.Thread.run(Thread.java:619)
Thread[Logger@9216774 3.5.2/463,3,main]
java.lang.Object.wait(Native Method)
com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
java.lang.Thread.run(Thread.java:619)
Thread[PacketListener1,8,Cluster]
java.net.PlainDatagramSocketImpl.receive0(Native Method)
java.net.PlainDatagramSocketImpl.receive(PlainDatagramSocketImpl.java:136)
java.net.DatagramSocket.receive(DatagramSocket.java:712)
com.tangosol.coherence.component.net.socket.UdpSocket.receive(UdpSocket.CDB:20)
com.tangosol.coherence.component.net.UdpPacket.receive(UdpPacket.CDB:4)
com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketListener.onNotify(PacketListener.CDB:19)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
java.lang.Thread.run(Thread.java:619)
Thread[main,5,main]
java.lang.Object.wait(Native Method)
com.tangosol.net.DefaultCacheServer.main(DefaultCacheServer.java:79)
com.networkfleet.cacheserver.Launcher.main(Launcher.java:122)
Thread[Signal Dispatcher,9,system]
Thread[RMI TCP Accept-41006,5,system]
java.net.PlainSocketImpl.socketAccept(Native Method)
java.net.PlainSocketImpl.accept(PlainSocketImpl.java:390)
java.net.ServerSocket.implAccept(ServerSocket.java:453)
java.net.ServerSocket.accept(ServerSocket.java:421)
sun.rmi.transport.tcp.TCPTransport$AcceptLoop.executeAcceptLoop(TCPTransport.java:369)
sun.rmi.transport.tcp.TCPTransport$AcceptLoop.run(TCPTransport.java:341)
java.lang.Thread.run(Thread.java:619)
ThreadCluster
java.lang.Object.wait(Native Method)
com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onWait(Grid.CDB:9)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
java.lang.Thread.run(Thread.java:619)
Thread[TcpRingListener,6,Cluster]
java.net.PlainSocketImpl.socketAccept(Native Method)
java.net.PlainSocketImpl.accept(PlainSocketImpl.java:390)
java.net.ServerSocket.implAccept(ServerSocket.java:453)
java.net.ServerSocket.accept(ServerSocket.java:421)
com.tangosol.coherence.component.net.socket.TcpSocketAccepter.accept(TcpSocketAccepter.CDB:18)
com.tangosol.coherence.component.util.daemon.TcpRingListener.acceptConnection(TcpRingListener.CDB:10)
com.tangosol.coherence.component.util.daemon.TcpRingListener.onNotify(TcpRingListener.CDB:9)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
java.lang.Thread.run(Thread.java:619)
Thread[PacketPublisher,6,Cluster]
java.lang.Object.wait(Native Method)
com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketPublisher.onWait(PacketPublisher.CDB:2)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
java.lang.Thread.run(Thread.java:619)
Thread[RMI TCP Accept-0,5,system]
java.net.PlainSocketImpl.socketAccept(Native Method)
java.net.PlainSocketImpl.accept(PlainSocketImpl.java:390)
java.net.ServerSocket.implAccept(ServerSocket.java:453)
java.net.ServerSocket.accept(ServerSocket.java:421)
sun.management.jmxremote.LocalRMIServerSocketFactory$1.accept(LocalRMIServerSocketFactory.java:34)
sun.rmi.transport.tcp.TCPTransport$AcceptLoop.executeAcceptLoop(TCPTransport.java:369)
sun.rmi.transport.tcp.TCPTransport$AcceptLoop.run(TCPTransport.java:341)
java.lang.Thread.run(Thread.java:619)
Thread[PacketListenerN,8,Cluster]
java.net.PlainDatagramSocketImpl.receive0(Native Method)
java.net.PlainDatagramSocketImpl.receive(PlainDatagramSocketImpl.java:136)
java.net.DatagramSocket.receive(DatagramSocket.java:712)
com.tangosol.coherence.component.net.socket.UdpSocket.receive(UdpSocket.CDB:20)
com.tangosol.coherence.component.net.UdpPacket.receive(UdpPacket.CDB:4)
com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketListener.onNotify(PacketListener.CDB:19)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
java.lang.Thread.run(Thread.java:619)
Thread[Invocation:Management,5,Cluster]
java.lang.Object.wait(Native Method)
com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onWait(Grid.CDB:9)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
java.lang.Thread.run(Thread.java:619)
Thread[DistributedCache:PofDistributedCache,5,Cluster]
java.lang.Object.wait(Native Method)
com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onWait(Grid.CDB:9)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
java.lang.Thread.run(Thread.java:619)
Thread[Invocation:Management:EventDispatcher,5,Cluster]
java.lang.Object.wait(Native Method)
com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
com.tangosol.coherence.component.util.daemon.queueProcessor.Service$EventDispatcher.onWait(Service.CDB:7)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
java.lang.Thread.run(Thread.java:619)
Thread[Termination Thread,5,Cluster]
java.lang.Thread.dumpThreads(Native Method)
java.lang.Thread.getAllStackTraces(Thread.java:1487)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:597)
com.tangosol.net.GuardSupport.logStackTraces(GuardSupport.java:791)
com.tangosol.coherence.component.net.Cluster.onServiceFailed(Cluster.CDB:5)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid$Guard.terminate(Grid.CDB:17)
com.tangosol.net.GuardSupport$2.run(GuardSupport.java:652)
java.lang.Thread.run(Thread.java:619)
2011-01-22 01:19:06,738 Coherence Logger@9216774 3.5.2/463 INFO 2011-01-22 01:19:06.738/9910757.904 Oracle Coherence EE 3.5.2/463 <Info> (thread=main, member=33): Restarting Service: DistributedCache
2011-01-22 01:19:06,738 Coherence Logger@9216774 3.5.2/463 INFO 2011-01-22 01:19:06.738/9910757.904 Oracle Coherence EE 3.5.2/463 <Info> (thread=main, member=33): Restarting Service: DistributedCache
2011-01-22 01:19:06,738 Coherence Logger@9216774 3.5.2/463 ERROR 2011-01-22 01:19:06.738/9910757.904 Oracle Coherence EE 3.5.2/463 <Error> (thread=main, member=33): Failed to restart services: java.lang.IllegalStateException: Failed to unregister: Distr
butedCache{Name=DistributedCache, State=(SERVICE_STARTED), LocalStorage=enabled, PartitionCount=257, BackupCount=1, AssignedPartitions=16, BackupPartitions=16}
2011-01-22 01:19:06,738 Coherence Logger@9216774 3.5.2/463 ERROR 2011-01-22 01:19:06.738/9910757.904 Oracle Coherence EE 3.5.2/463 <Error> (thread=main, member=33): Failed to restart services: java.lang.IllegalStateException: Failed to unregister: Distr
butedCache{Name=DistributedCache, State=(SERVICE_STARTED), LocalStorage=enabled, PartitionCount=257, BackupCount=1, AssignedPartitions=16, BackupPartitions=16}

Hi
It seems like the problem in this case is the call to clear() which will try to load all entries stored in the overflow scheme to emit potential cache events to listeners. This probably requires much more memory than there is Java heap available, hence the OOM.
Our recommendation in this case is to call destroy() since this will bypass the even firing.
/Charlie

TPESVCFAIL - application level service failure

#include <atmi.h>
#include <fml32.h>
#include <fml1632.h>
#include <tpadm.h>
#include <stdio.h>
#include <stdlib.h>
int main(void)
long len = 0;
char lmid[16];
char serverName[64];
char srvID[64];
char srvGrp[16];
char rqAddr[16];
char totWorkl[16];
char state[16];
char numReq[16];
if (tpinit((TPINIT*)NULL) == -1) {
fprintf(stderr, "tpint error\n");
exit(1);
int flags = MIB_LOCAL;
FBFR32* rqbuf = (FBFR32*)tpalloc(FMLTYPE32, NULL, 0);
Finit32(rqbuf, (FLDLEN32)Fsizeof32(rqbuf));
Fchg32(rqbuf,TA_OPERATION, 0, "GET", 0);
Fchg32(rqbuf, TA_CLASS, 0, "T_SERVER", 0);
Fchg32(rqbuf, TA_FLAGS, 0, (char*)&flags, 0); **/+/if i add this line: compile succeed, but run wrong!!! error info: TPESVCFAIL - application level service failure+**
if (tpcall(".TMIB",(char*)rqbuf, 0, (char**)&rqbuf, &len, 0) != -1)
int i, j;
i = Foccur32(rqbuf, TA_SERVERNAME);
for (j = 0; j < i; ++j) {
Fget32(rqbuf, TA_SERVERNAME, j, serverName, 0 );
Fget32(rqbuf, TA_SRVID, j, srvID, 0);
Fget32(rqbuf, TA_STATE, j, state, 0);
Fget32(rqbuf, TA_SRVGRP, j, srvGrp, 0);
Fget32(rqbuf, TA_RQADDR, j, rqAddr, 0);
Fget32(rqbuf, TA_TOTWORKL, j, totWorkl, 0);
Fget32(rqbuf, TA_NUMREQ, j, numReq, 0);
if (strcmp(state, "ACTIVE") == 0)
printf("%s,%s,%s,%s,%s,%s,%s\n",serverName, srvID, state, srvGrp, rqAddr, totWorkl, numReq);
else{
printf("%s\n", tpstrerror(tperrno));
exit(1);
tpfree((char*)rqbuf);
tpterm();
return 0;
how to get local information ,not global information ?
thinks!!!
Edited by: 998527 on 2013-4-7 上午7:27

See the TA_FLAGS in the docs;
TA_FLAGS
Long valued FML32 field identifying generic and component MIB specific flag values. Component MIB specific values that may be set in this attribute are defined within each component MIB reference page. Generic flag values and uses are listed below.
MIB_LOCAL
This flag is used to modify retrievals from certain classes defined in this MIB. For a number of classes in this MIB, there exists both global information (available at any site in an active application) and local information (available on the particular site where the object is active). Requests to retrieve information from these classes will by default retrieve only the global information and not the local for efficiency. If the application user is willing to wait for local information to be collected, possibly from multiple sites, this flag should be set on the retrieval request. Classes with local information have local attributes listed last in the attribute table with a subheading indicating that they are local attributes. Classes which have only local information will automatically default to retrieving local information even if this flag value is not set.
MIB_PREIMAGE
indicates that a pre-image check must be passed before a SET operation will be performed. A pre-image check insures that occurrence 0 of any MIB specific class attributes match the existing object. If so, the object is updated using occurrence 1 of any MIB specific class attributes. Attributes occurring less than two times are not considered for pre-image checking. Multiply occurring fields are checked if their associated count attribute is specified twice.
MIB_SELF
This flag is used as a shorthand to indicate that identification attributes for the client or server originating the request should be added to the request buffer prior to processing. For clients, TA_CLIENTID is added and for servers, TA_GRPNO and TA_SRVID are added.

Serious service failure in zip code 70119 / 70122 at the New Orleans Jazz Fest Weekend 1

I experienced total service failure in zip code 70119 & 70122 at the New Orleans Jazz Fest. No send / receive of data, voice or text. I use an iPhone 5s running the latest OS. I had better service during all hurricanes, except Katrina, of course. The only evidence I have of this are screenshots of pinwheeling texts and Facebook posts. Oh, and I have a very ****** off wife for not being able to contact me. This was a first, but it was a weekend-long frustrating affair. Please address this before next weekend's Jazzfest. I'm not the only Verizon customer pinwheeling.

I experienced total service failure in zip code 70119 & 70122 at the New Orleans Jazz Fest. No send / receive of data, voice or text. I use an iPhone 5s running the latest OS. I had better service during all hurricanes, except Katrina, of course. The only evidence I have of this are screenshots of pinwheeling texts and Facebook posts. Oh, and I have a very ****** off wife for not being able to contact me. This was a first, but it was a weekend-long frustrating affair. Please address this before next weekend's Jazzfest. I'm not the only Verizon customer pinwheeling.

Every time i go to write something it stops the circle circles and then it writes everything, does my mac need service or something

every time i go to write something it stops, the circle goes round and then it starts writing, does my mac need servicing or what is going on

What model of iMac do you have?
How much memory is installed?
What version of Mac OS X are you running?
When did the issue start occurring?
Did you recently install any software updates or new software that coincide with the onset of the issue?
Your post contains very little information to work with, but here's what I would do if it were my system.
First check the status of your hard driveby launching the Disk Utility application that is located in the Applications/Utilities folder. Click on the Verify Disk option and observe whether it reports any major errors. You can also boot from the Install DVD that came with your system by holding down the 'c' key and then pulling down the Utilities menu bar item to select Disk Utility. Either way will work. If the disk checks out OK then click on the Repair Permissions option.
To get a more detailed picture of the SMART status (hard drive error logging) you can use an application like SMART Utility which can be downloaded here. Obviously downloading a new application could be a problem if you're system is 'hanging' whenever you try to write something, so this may not be an option.
http://www.volitans-software.com/smart_utility.php
If you find any significant errors, make sure you back up your data if you haven't already done so. If there aren't any significant errors then go into the System Preferences and click on Users & Groups. Try creating a new user account and then log into it to see if you have the same issues. Creating a new user for test purposes will help confirm whether you are dealing with some sort of software issue.
If a new user account resolves the issue then open the Activity Monitor application located in the Applications/Utiliteis folders and click on the CPU button. In the lower left corner you should see a summary listing the % User, % System, % Idle. What are these percentages? If the CPU idle percentage is near zero then you have a process running that is consuming your SPU time. To try and find it pull down the menu to select 'All Processes', then click on the %CPU column to sort by the percent that each process is consuming your CPU. The numbers constantly change, but do your best to see if there are one or two processes consuming the majority of the CPU time and post the names. Then do the same test in the new user account. I suspect you may have some process from a previously installed utility, virus checker, etc. that is keeping your system busy. I've included a screenshot from my system below. It doesn't have much going on, and as you can see in the lower left corner the CPU is basically idle most of the time. If I were to launch a CPU intensive app the numbers would change dramatically.

Mac mail service isnt listening on default ports at all other than SMTP

Mac mail service isnt listening on default ports at all other than SMTP.
I can port scan locally and here is what's listening
Port Scan has started…
Port Scanning host: <IPADDRESS>
     Open TCP Port:     25             smtp
     Open TCP Port:     53             domain
     Open TCP Port:     80             http
     Open TCP Port:     88             kerberos
     Open TCP Port:     106            3com-tsmux
     Open TCP Port:     311            asip-webadmin
     Open TCP Port:     389            ldap
     Open TCP Port:     443            https
     Open TCP Port:     464            kpasswd
     Open TCP Port:     587            submission
     Open TCP Port:     625            dec_dlm
     Open TCP Port:     749            kerberos-adm
Port Scan has completed…
Mail service is on.

first place to start is always /var/log/system.log
stop/start mail service while watching that log.
You will probably catch some dovecot/imap lines that will yield clues.
Post results.

I recently took my 27 in i mac to peach mac for service for a flashing green screen. They said it was not a hardware issue but a software issue and want to charge me 99.00 to re-install it. WiIll mac come out with a patch for OS x for this?

I recently took my 27 in I Mac to Peach Mac for service for a flashing green screen. It comes up when I log in. They said it was not a hardware issue but a software issue and want to charge me 99.00 to re-install it. WiIll mac come out with a patch for OS x for this? Is this worth it?

Having a similar issue with my MacBook Pro w/Retina 2012.
I did the reinstall my self and incrementally did the updates by downloading them from Apple's website instead of using the App Store.
I found that the problem occured after updating to OS X 10.9.3.
The issue is in a 4k resolution update for mirroring displays. Not that you should be doing that from an iMac but your packaged update may have been similar even though the update was meant for 2013 MacBook Pro's.
You can try reseting the Nvram chip during boot up by pressing "Option + P + R" keys. You may have to do this after entering your password to log in if you have that set up on your computer. However this only works on certain models of Mac hardware and may not do anything at all.
After you get your second opinion from Apple, if they again confirm it's a software issue, then you should reinstall OS X Mavericks and download updates from the website instead of the app store. This way you control your updates. You will find the OS X 10.9.2 update as well as a seperate security update prior to the released update of the dreaded OS X 10.9.3
Again if you don't want the issue to occur again, then hold off on updating to OS X 10.9.3, but be cautioned that you do so at the risk of leaving your computer less secured even though it will seem to run better.

Hi-- the mac keeps freezing. The log refers to LS Service failure, copied below. Any assistance will be most appreciated. Thanks

Apple System Log (ASL) Messages:
Source:          /var/log/asl
Size:          131 KB (131,261 bytes)
Last Modified:          9/30/13 9:49 PM
Recent Contents:          ...
2013-09-30 21:45:36 -0400 ReportCrash[250]: failed looking up LS service ( scCreateSystemService returned MACH_PORT_NULL, called from SetupCoreApplicationServicesCommunicationPort, so using client-side NULL calls.
2013-09-30 21:45:36 -0400 ReportCrash[250]: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
2013-09-30 21:45:36 -0400 ReportCrash[250]: failed looking up LS service ( scCreateSystemService returned MACH_PORT_NULL, called from SetupCoreApplicationServicesCommunicationPort, so using client-side NULL calls.
2013-09-30 21:45:36 -0400 ReportCrash[250]: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
2013-09-30 21:45:36 -0400 ReportCrash[250]: failed looking up LS service ( scCreateSystemService returned MACH_PORT_NULL, called from SetupCoreApplicationServicesCommunicationPort, so using client-side NULL calls.
2013-09-30 21:45:36 -0400 ReportCrash[250]: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
2013-09-30 21:45:36 -0400 ReportCrash[250]: failed looking up LS service ( scCreateSystemService returned MACH_PORT_NULL, called from SetupCoreApplicationServicesCommunicationPort, so using client-side NULL calls.
2013-09-30 21:45:36 -0400 ReportCrash[250]: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
2013-09-30 21:45:36 -0400 com.apple.launchd[1]: Job appears to have crashed: Trace/BPT trap: 5
2013-09-30 21:45:36 -0400 com.apple.launchd[1]: Throttling respawn: Will start in 10 seconds
2013-09-30 21:45:36 -0400 ReportCrash[250]: Saved crash report for avgnotifyd[249] version ??? to /Library/Logs/DiagnosticReports/avgnotifyd_2013-09-30-214536_Oded-Kadoshs-MacBo ok-Air.crash
2013-09-30 21:45:37 -0400 ReportCrash[250]: failed looking up LS service ( scCreateSystemService returned MACH_PORT_NULL, called from SetupCoreApplicationServicesCommunicationPort, so using client-side NULL calls.
2013-09-30 21:45:37 -0400 ReportCrash[250]: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
2013-09-30 21:45:37 -0400 ReportCrash[250]: failed looking up LS service ( scCreateSystemService returned MACH_PORT_NULL, called from SetupCoreApplicationServicesCommunicationPort, so using client-side NULL calls.
2013-09-30 21:45:37 -0400 ReportCrash[250]: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
2013-09-30 21:45:37 -0400 ReportCrash[250]: failed looking up LS service ( scCreateSystemService returned MACH_PORT_NULL, called from SetupCoreApplicationServicesCommunicationPort, so using client-side NULL calls.
2013-09-30 21:45:37 -0400 ReportCrash[250]: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
2013-09-30 21:45:37 -0400 ReportCrash[250]: failed looking up LS service ( scCreateSystemService returned MACH_PORT_NULL, called from SetupCoreApplicationServicesCommunicationPort, so using client-side NULL calls.
2013-09-30 21:45:37 -0400 ReportCrash[250]: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
2013-09-30 21:45:37 -0400 ReportCrash[250]: failed looking up LS service ( scCreateSystemService returned MACH_PORT_NULL, called from SetupCoreApplicationServicesCommunicationPort, so using client-side NULL calls.
2013-09-30 21:45:37 -0400 ReportCrash[250]: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
2013-09-30 21:45:37 -0400 com.apple.launchd[1]: Job appears to have crashed: Trace/BPT trap: 5
2013-09-30 21:45:37 -0400 com.apple.launchd[1]: Throttling respawn: Will start in 10 seconds
2013-09-30 21:45:37 -0400 ReportCrash[250]: Saved crash report for avgconfigd[251] version ??? to /Library/Logs/DiagnosticReports/avgconfigd_2013-09-30-214537_Oded-Kadoshs-MacBo ok-Air.crash

Back up all data, then remove AVG Internet Security/Antivirus according to the developer's instructions. You may have to boot in safe mode in order to complete the uninstallation. Reboot and test.

Mac OS services failure

Similar Messages

Maybe you are looking for