Mac OS X - deep links in youtube not working, fast forward not working

Specs: Mac mini 1.66 Intel Core Duo, OS 10.6.8 Snow Leopard, Flash 11.1.102.64
Adding, for example #t1m30s, to the end of a youtube url does nothing, videos always start at the beginning. Yes this is an older computer but deep linked youtube videos work fine in Firefox but not Safari. I have another Mac Mini slightly newer, a Mac mini 1.83 Intel Core 2 Duo with same software specs and deep links work fine on it.
Also I can't seem to drag the marker anymore. Very frustrating.

While you might get an answer from someone here (I'm interested in knowing too, I run into the drag problem from time to time) I think you'll have better luck over on YouTube's forums.
Chris

Similar Messages

  • Macbook Pro does not see Fast Ethernet but works fine with Gigabit Ethernet

    Hi to everybody,
      It is some time I have a problem connecting my unibody Macbook Pro (late 2008) to the ethernet cables in my office. There are 16 wall jacks in the lab, of which 13 are Fast Ethernet (100 Mbit/s) and 3 are Gigabit Ethernet. No matter what I do, if I connect to the 100 Mbit/s jacks, my Macbook does not see the connection and keeps saying "Cable unplugged". If I switch to a Gigabit jack, then a connection is quickly established.
    I have spent one whole afternoon debugging. Here is what I did:
    My computer dual boots Mac OS X and Linux. No matter which operating system I use, the problem is the same.
    Using different Cat.5 cables does not change the situation (I tried three of them.)
    All the 13 Fast Ethernet jacks do not work.
    All the 3 Gigabit jacks work smoothly.
    What puzzles me is that my computer happly uses the newest technology (Gigabit ethernet) but has problems with the oldest one. Has somebody else experienced the same problem?

    After a lot of struggle, I discovered that other people had this very issue as well. It seems that the cause is a faulty Realtek chip used in the ethernet cards of some MacBooks and other brands. There is apparently no way to fix this: I solved my problems by buying a Gigabit Ethernet switch which I connected to the Fast Ethernet wall jack. (Another option might be to use a Ethernet-to-USB adapter - but I did not try this as I have no adapter of this kind.)

  • Scrubbing/fast forward not working

    i have an mp3 file that is 18 hours long. It's an audio book.
    when i try to use the scrubbing or hold down fast forward it wont go to any other parts of the track. it doesn't matter where i put the slider, even if i drag it all the way to the end it still plays near the beginning of the track. when i hold down the fast forward button it just sounds like a skipping CD, looping over the same part of the track over and over!
    I tried restoring the iphone. still wont fast forward.
    could this be a bug in the ipod software?

    I did some research and found a great little app called "MP3 Scan+Repair".
    I used it to repair the MP3 audio book file and all is well now

  • Chrome versions 21-26 show severe problems with flash deep links

    Dear Madam or Sir,
    New Chrome versions (at least versions 21-26) produce severe problems with Adobe Flash concerning deep links.
    You will find test cases and detailed information on this subject here:
    http://www.in-tanz.de/test-chrome/test.php
    Since August 2012 all new versions starting from version 21 to 26 (at least 32-bit Windows) do no longer support for example deep links into Flash. I.e. links like:
    poly-9.php#two
    It does not matter, what deep link you want to jump to (two, three, four etc.), Chrome always starts with „one“ / at the beginning of the Flash-animation.
    Like all other browsers (I successfully tested: Opera, Safari, Firefox, Internet-Explorer) Chrome should jump directly to the deep link #two, #three, etc.
    It does not matter which flash player I have been using over the last 9 months (at the time 11.6.602.180).
    This is a major problem as only my website contains more than 14,000 Flash files with over 100,000 deep links.
    In fact, I reported the bug (first noticed with Chrome 21) to Google beginning October 2012 (see bug reports on my page http://code.google.com/p/chromium/issues/detail?id=154494). But recently, I got the feeling, that there seems to be little interest in solving this problem. Actually, after I had informed Google about it, they even rolled out new versions of Chrome containing the bugs, instead of repairing it.
    Do you know any work around or can you offer any help?
    Kind regards,
    in-tanz

    Chrome uses a proprietary build of the plug-in called "PepperFlash" because it's a PPAPI plug-in where the ActiveX and standard plug-in are NPAPI. That may have something to do with it.

  • Hairpin forwarding not working with CCME 4 and SIP

    We are a VoIP provider and we're trying to install Cisco Unified CME 4.0 for a customer. IOS is 12.4(4)XC1 on a 2811. The customer will use our SIP service as his only outgoing trunk (no on-board ISDN or FXS cards).
    On our SIP service we don't support call transfer or forwarding using the "302 Temporarily Moved" SIP method, for billing reasons. The customer needs to to hairpin routing and actually have the call go entirely through his equipment.
    Following instructions, we tried enabling hairpin routing by issuing the following commands:
    voice service voip
    allow-connections sip to sip
    no supplementary-service h450.2
    no supplementary-service h450.3
    supplementary-service h450.12
    dial-peer voice 9000 voip
    no supplementary-service h450.2
    no supplementary-service h450.3
    supplementary-service h450.12
    Despite all this, when an ephone-dn has call forwarding enabled to an external SIP number, and a call comes in through the SIP trunk, our SIP server gets a "302 moved temporarily" message. It rejects this message and the call fails.
    We even tried loopback-dn routing but we still get the same result.
    Is there a way to force CCME to route the call through its inside even if it's coming and going from/to the same SIP trunk?
    Thank you
    -Manuel

    Just an update: Davey's post was very helpful as it solved our "call forwarding not working" problem. The solution was to add the "service session" command to my voip dial peers. CME now hairpins forwarded calls correctly.
    What still doesn't work at all is call transfer. If I receive an external SIP call and want to transfer it to another external SIP number, I just get the "unable to transfer call" error message on the phone, and both calls are just placed on hold. So it's not a permission problem - the call can be dialled correctly. But when hitting "transfer" the second time, CME doesn't "know" how to join them together (ie. hairpinning).
    Cisco TAC's replies so far have been quite strange. I've been told that CME does not support hairpinning and that this is still being developed - apparently not, because call forwarding *does* work now. I'm only missing call transfer, then I'm all set :-)
    Thank you
    -Manuel

  • Deep Link (FSP_AFTER_LOGIN_URL) Not Working in APEX 4.1

    Hi all,
    We recently migrate from APEX 3.2 to 4.1. The deep link (FSP_AFTER_LOGIN_URL) does not work.
    We have two applications, say 100 and 200. Application 100 is the central login application. Application 200 refers to application 100 for authentication. Both applications share the same cookie name.
    When accessing via http://..../f?p=200:1, the request is redirected to application 100 login page. This is the expected behavior. However, after login, the APEX doesn't take us back to 200:1. It goes to the app 100 home page.
    Do any of you have the same issue?
    Thanks,
    Avon

    Looking forward to 4.1.1 !
    In the meantime, the solution above seems to work just fine when the deep link includes just a App ID, APP PAGE ID, even a clear cache set of pages.
    What would be the best method for also putting into the Login Link Item Values that are passed from deep link as I don't think they get set from the URL.
    In your example, if the link also contained item name/value combinations I don't think the following will work.
    Original URL : f?p=300:3::::::P3_ITEM1,P3_ITEM2:123,ABC
    and the Login URL is:
    f?p=970:101:&SESSION.::&DEBUG.::FSP_AFTER_LOGIN_URL:/f?p=&APP_ID.|&APP_PAGE_ID.||NO||P3_ITEM1,P3_ITEM2|&P3_ITEM1.,&P3_ITEM2./
    Final URL: f?p=970:101:<session#>.::NO::FSP_AFTER_LOGIN_URL:/f?p=300|3||NO||P3_ITEM1,P3_ITEM2|, < No Values here>
    as P3_ITEM1 and P3_ITEM2 don't get set to pass them along to the authentication application.
    Any thoughts?
    --Andy                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Deep links in Flash Player not working

    The German support-team of Adobe asked me to introduce this question here again:
    They have already verified the problem with their systems.
    Chrome versions 21 - 33 (at least 32-bit versions on Windows (at least XP up to Windows 7) do no longer jump to Flash-links like
    http://www.domain.xxx/.../xxx.php#two
    All other browsers do resp. earlier Chrome-versions did jump correctly to frame / reference #two.
    It does not matter, what deep link you want to jump to (two, three, four etc.), Chrome always starts with „one“ - i.e. at the beginning of the Flash-animation.
    Like all other browsers (I successfully tested: Opera, Safari, Firefox, Internet-Explorer) Chrome should jump directly to the deep link #two, #three, etc.
    In August 2012 this bug was implemented in Chrome 21.
    You will find a test-suite explaining and showing the problem here:
    http://www.in-tanz.de/test-chrome/test.php
    Does anyone know any help?

    Chrome uses a proprietary build of the plug-in called "PepperFlash" because it's a PPAPI plug-in where the ActiveX and standard plug-in are NPAPI. That may have something to do with it.

  • Deep linking not working in Flex 4

    Deep linking is working in Flex 4 (using Flash Builder) when I debug and run the application, but not when I do an export release build.
    So I tried using the files from the bin-debug directory, and noticed that deep linking only works when the files are in the bin-debug directory. If I move them from there, they don't work.
    And to make things worse, my Flex 3 builder is not generating the HTML wrapper when using the Flex 4 SDK and deep linking. So I am screwed in every way. I really need help to get my app launched. It is finished, but stuck on my computer.
    Is this a know problem? Thanks very much for any help.

    If anyone run into this poblem, I just figured out half the problem. The javascript file (history.js in the history directory) only checks for url with (http://), so if you are testing and in your browser you have file://loc_of_html_file, then it will not work.
    On the other hand, my next problem is still unresolved:
    Flex Builder 3 is not generating the HTML wrapper when using deep linking AND with the Flex 4 SDK.
    Thanks.

  • Deep linking not working as expected

    Hello,
    I'm trying to use the deep linking feature of JHS (10.1.3.2).
    The "Query by Key Value" type of deep link works only if a query (like a search) was issued first. Something like how I would expect the "Set current row using key value" type to work.
    Here's the pagedef fragment that gets generated - it looks ok to me...
    <invokeAction id="queryByKeyValueWorkscopeInvoke"
    Binds="queryByKeyValueWorkscope" Refresh="prepareModel"
    RefreshCondition="#{!empty param.instanceId}"/>
    The "auto query" flag is set to false for this group, could that be a reason?
    Thanks in advance,
    Igor

    Hi,
    Thank you for responding!
    I created a new project for HR schema to make sure it wasn't some mistake. The only things that I changed from the default were setting the layout to "form", making adv search a separate page and setting "autoquery" to FALSE.
    The result is still the same: deep link only works if there was a search performed before in that HTTP session.
    here's the example of URL that I'm using:
    http://mypc:8988/HrWeb/faces/pages/Employees.jspx?instanceId=108
    I'm pretty sure I'm not missing anything because the link works most of the time.
    I can upload the project if that helps.
    Best regards,
    Igor
    Edited by: igorbunov on Jul 7, 2009 2:33 PM
    Edited by: igorbunov on Jul 7, 2009 3:41 PM

  • Deep linking not working in internet explorer 8.

    Even a simple example of deep linking does not seem to work in IE8.
    http://livedocs.adobe.com/flex/3/html/help.html?content=deep_linking_3.html
    My Google searches seem to indicate it might not even wor in IE 6 and IE7.
    Please tell me there is a work around.

    Are you saying deep linking may not appear to work when working in Flex Builder, but it will work when the app has been deployed to the server?
    Thanks very much Alex.

  • Deep linking to iBook chapter gone?

    Hi all,
    A few weeks ago I started playing with iTunes U Course Manager and found that when referencing an iBook in an assignment, one could choose the chapter that will open when the link is clicked.
    Today that option isn't there. I'm using Apple's official iOS 5.1 User Guide, and know that the chapter links were working previously.
    The iTunes U Guidelines (http://www.apple.com/support/itunes-u/docs/iTunesUCourseGuidelines0712.pdf) state:
    Anyone know where my user error is here?
    Thanks,

    Hi there,
    I have also been having the same issues. When linking an iBook from the iTunes store link, My Materials or from my Mac I am able to link the book, but the 'Link to a Chapter' pop-up does not appear as it should to allow deep-linking.
    Believe me, I have tried every possible combination of resources and approaches, all with correctly referenced contents data, but I just can't get the deep linking option to show!
    I am currently in email discussion with iTunes U support to try to resolve the issue. We have tried linking identical iBooks in our iTunes U courses and the screenshots from the support team show the 'Link to Chapter' option, yet in my course the option never appears!
    I am beginning to think this may be a regional problem, as the support team is in the USA while I am based in Switzerland. He has said that he will pass it on to the engineers to see if they have a solution, so I will keep you updated once I hear more...
    Really want to use this feature, as it makes life much easier for my younger students.

  • I was doing some thing on my mac and the normal link to the applications folder from the bottom right hand corner disappeared, I cant find it anywhere, Can you help me?

    I was doing some thing on my mac and the normal link to the applications folder from the bottom right hand corner disappeared, I cant find it anywhere, Can you help me?

    Simple process. If an iPhone go to the Apple Store and not Verizon
    the phone from Verizon will be a refurbished device and not new unless under the 14 day worry free guarantee
    good luck

  • How can I properly embed deep links that contain http: twice

    Hi,
    We have an online bookstore where we need to embed deep links to a booktopia page. I have tested the links given to us by the affiliate program (DGM performace) and they work perfectly but when I embed them into muse and hit publish they give me a server not found page.
    http://academyhypnoticscience.businesscatalyst.com/academy-bookstore.html
    I have established that this seems to be an error in the way muse is interpretting the link (or maybe business catalyst) as the link I paste into muse is:
    http://t.dgm-au.com/c/63052/71095/1880?u=http%3A%2F%2Fwww.booktopia.com.au%2Ftrancework-an -introduction-to-the-practice-of-clinical-hypnosis-michael-d-yapko%2Fprod9780415952590.htm l
    but when I click on the link on the website (on the image of the first book) I get this:
    http://http%3a%2f%2fwww.booktopia.com.au%2ftrancework-an-introduction-to-the-practice-of-c linical-hypnosis-michael-d-yapko%2fprod9780415952590.html/?clickid=yV0WHZyIfUJsUl0wAFyspSG PUkW3tATpbw2qTw0
    and when I right click on the image and copy the link location I get this:
    http://t.dgm-au.com/c/63052/71095/1880?u=http%253A%252F%252Fwww.booktopia.com.au%252Ftranc ework-an-introduction-to-the-practice-of-clinical-hypnosis-michael-d-yapko%252Fprod9780415 952590.html
    Any ideas?
    Cheers,
    Tina

    You can't have two http in a URL. Why do you have two? Try taking one out.

  • I'm using a Mac.  I "upgraded" to LR5 from LR4.  I do not want to be a member of the "Creative Cloud".  I just want to use the software I purchased, specifically to upload to my SmugMug account.  Is there a way to use an add-on to do this?  Aperture and L

    I'm using a Mac.  I "upgraded" to LR5 from LR4.  I do not want to be a member of the "Creative Cloud".  I just want to use the software I purchased, specifically to upload to my SmugMug account.  Is there a way to use an add-on to do this?  Aperture and LR4 were easy but I'm finding it impossible without subscribing to CC.

    Sorry, maybe I don't understand, but why do you feel compelled to subscribe to CC if you already have a permanent Lightroom 5 licence?
    For the SmugMug plugin, a simple Google search ("smugmug lightroom plugin") gives this link to download the plugin:  http://help.smugmug.com/customer/portal/articles/121321
    Another way is to click the button "Find more services online..." in the the Publish Service section of Lightroom, and to search for SmugMug in the Adobe Add-ons portal; you will find a link to the latest plugin: https://creative.adobe.com/addons/products/1755

  • I just migrate settings and software from my PowerBook to a new Mac Pro. All the software download from CC is there and working, except for CC, and there is not way to install.

    I just migrate settings and software, include CC, from my PowerBook to a new Mac Pro. All the software download from CC is there and working, except for CC, and there is not way to install. I have try because every time I restar keep bothering asking for installation, (by the way, the link is not up to date). Will appreciate your help.

    never migrate adobe software.  it should be properly installed.
    uninstall all the cc programs you can, clean and then reinstall per, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Maybe you are looking for