Mac Pro 2008 Can't start Windows 7 / 8 Installer

I'm trying to load Windows 8 (And have previously tried everything with Windows 7) on my Mac Pro early 2008 with Mountain Lion, and cannot get the installers to initiate.
When I start the bootcamp assistant and reboot, my mac freezes before ever getting to the installer. When I reboot and hold option to manually select the installer, it freezes as soon as I select it. I've tried this from a DVD, USB, and even an install partition i setup on my HD, all with the same freezing results. This is a legitimate copy of Windows 8 system builder I'm working with and have installed it perfectly in Parallels.
I should note I upgraded my video card a long time ago to a gt 120, so I'm wondering if the video card might be the problem. I've installed Windows 7 with this video card in the past so I'm guessing this is a Mountain Lion/Bootcamp 5 issue.
Has anyone else with a Mac Pro 2008 succesfully installed Windows 7/8 from Mountain Lion/Bootcamp 5?
Any input would be immensely appreciated!

There are no Windows 8 Bootcamp drivers. Windows 8 is not supported.
Use Parallels or Fusion to install Windows 8. By doing so you eliminate the need for drivers since the virtual machine creates virtual hardware and drivers.
Once the Windows 8 Bootcamp drivers are developed and released you can then install using Bootcamp Assistant.
Read this forum. Some people are posting that they had some success with the Bootcamp install. but if you have to rely on your computer then don't take the chance.

Similar Messages

Mac Pro 2008 Won't Start Up without Option Key

Hi.
I cannot start up my Mac Pro 2008 without holding down the Option key.
My Snow Leopard internal hard drive failed, so I replaced my failed internal drive with a brand new one and put the cloned backup onto it. I also have other internal drives and partitions with systems 10.5.6, 10.7.5, and 10.8.4. I briefly added a Mavericks partition, but removed it.
I THINK the problems started after the HD failure, but I'm not sure. I added no peripherals recently, although I did add 4 gigs of RAM which were faulty and I had to replace them. But they test fine with a memory test.
If I Restart, the Mac comes up with a grey screen and won't boot into any system.
If I Shut down, then Start up, I get the gray screen.
In System Preferences, I can see every single possible Startup Drive, but no matter which one I select, the same gray screen happens on boot up.
However, if I hold down the Option key (from startup or restart), then I can choose any startup volume and it starts just fine.
I've run Disk Utility many times for Repair Disk and Repair Disk Permissions on every volume. I've run Disk Warrior. I've zapped the SMC/PRAM, etc. I've tried starting up from external firewire drives and USB drives. No matter which drive I select in StartUp Disk Preferences, it's the same grey screen.
I've tried starting up with ZERO peripherals attached except for USB keyboard and mouse.
I've taken out all startup and login items.
I'm don't know what else to try. I don't mind using the Option key every time, but I'm worried it's a sign of impending problems.
Thanks!

Barry, thanks for your reply. Yes, that's what I mean when I wrote:
"In System Preferences, I can see every single possible Startup Drive, but no matter which one I select, the same gray screen happens on boot up."
I selected a default startup volume in sys preferences, closed it, and restarted. I tried every volume possible in turn.
But thanks for doublechecking

Mac Pro (2008) do not start up

When i try to start my Mac Pro (2008) i only get the Fan to run with high speed and the power light/status light flash with high speed continusly. No video on the screen and no HD acctivity. Do someone know about this problem? I have to reset the PRAM and reset the SMC with no better result.

Yep, I get the same, but only occasionally, as I mostly put it to "sleep" but when away for length of time (e.g. a week or so), I turn it off:
When the fans spin and nothing happens, just press the power on button once more and it switches off. Press the power on button again, and it should start up.
Have a look in the manual and see if your logic board battery needs replacing. (page 46 of the manual)

Bootcamp 5.1.1 on Mac Pro Cylinder can't install Windows 8

Hi,
I've gone through almost every discussion regarding the common issue "Windows coud not update the computer's boot configuration" but none is related to Bootcamp version 5.1.1 and latest Mac Pro cylinder.
I already tried the solution presented by Jarvil at this discussion: https://discussions.apple.com/message/23545780#23545780
Based on Jarvil's solution there is a very important thing that is not happening in my case, that is that I never get the option to boot from the "Windows" partition. I only have 3 options, 1) Macintosh HD 2) Recovery 3) EFI Boot.
By not having the option to boot from Windows partition I automatically deviate from Jarvil's solution.
So, I proceed with EFI boot, I reach the step where I have to select the partition and I pick the 4th partition and it says that Windows can't be installed in this partition so I delete/format it and proceed with installation and it goes all well until the very end where it's finishing the install that I get the message:
"Windows coud not update the computer's boot configuration".
I also tried skipping the install --> login into Mac OS X --> Disk Utility --> Delete partition --> Create ExFAT partition (tried FAT also) --> Reboot --> EFI Boot (Windows partition still not available) --> Format partition --> Proceed with install --> Same error again.
After the error, it reboots and then I get a blue screen (**** Windows blue screens) with a message:
Recovery
Your PC Needs to be repaired
The Boot Configuration Data file is missing some required information.
File: \BCD
Error code: 0x0000034
You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer.
So I reboot holding Option key and now the partition Windows appears and if I boot from it I get the same blue screen with the recovery error. So I reboot again and login into OSX, go to Disk Utility and delete the "Untitled" partition and I recreate it using ExFAT but then it gets stuck "Preparing to partition disk".
I'm attaching snapshots.
I really hope that someone from Apple support can provide a solution. Thank you very much in advance.
Alejandro

It's not an Apple response but it is something which worked for me. This is an exerpt from a post I made on another site. It's a bit involved and you may think this should not be necessary (and you'd be right) but if you want to try it you're welcome. No guarantess.
Install Windows again just like you did before with Bootcamp (but you may have to remove any traces of it first).
So starting again with Bootcamp Assistant and with Macintosh using the whole disc again begin the process.
Allow Windows to be installed as normal.
When the BCD error box opens up DO NOT click on OK - immediately do a hard shutdown of the Mac by holding the power button. This is so the changes are not rolled back.
Start up the Mac again holding the Alt key and choose the USB EFI Boot option in the boot menu (it will be orange). At this point if you get a Windows blue screen error shutdown and take out the USB then restart the machine holding Alt and at the boot menu plug in the USB again and do the above.
At the installer's start screen press shift + F10 to get a command prompt.
In the command prompt type
diskpart and hit enter
type
list volume and hit enter
Note the volume letters and numbers of all the volumes . One should be an EFI partition of type FAT32 and it will have no drive letter.
Now type
list volume and hit enter (note the letters and numbers of the displayed volumes) One will be your EFI partition of FAT32 type and it will have no letter, just a number.
type
select volume X (where X is the number of your EFI partition) and hit enter
type
assign letter=B and enter
type
exit and enter
type
bcdboot C:\Windows /l en-GB /s B: /f ALL *** note the /l en-GB is for locality and language and will default to English US if not changed. Obviously you need to change to your own locale and language code***
press enter (after checking all spaces etc). You may also struggle to find the \ key on your keyboard, it may change position once in command prompt!.
After a few seconds it should report that the boot files were written. If it does that you can type in
wpeutil reboot and press enter at which point your Mac will reboot. Hold the Alt key and choose your new EFI Boot option and hopefully Windows will boot.
Obviously all of this can be a little daunting and should not be taken on lightly. Having said that Windows is not currently installing and you've got nothing to lose. You can always go back to what you have now (with TM backups of course, and maybe even without).
Good luck

Early 2011 mac pro 15'' can't install windows 8.1

Early 2011 mac pro 15''
for windows 8.1 drivers released ?
thanks

Melophage,
thanks your reply...
yes,
my mac pro book：boot camp 5.1.x MacOS 10.9.2
and creating partion for windows 8.1,
but when installing, it still can't find any drivers for windows 8.1
thanks a lot...

Hi All, Mac Pro 2008 will not start after shutdown straight from sleep! Help!

WILL A NEW LOGIC BOARD SOLVE MY PROBLEM?
My early 2008 Mac Pro (2.8, 8-core 22 gigs ram) was shutting down from sleep both when I activated it, and then later by itself. Recently it refused to turn on, shuts down after about 3 seconds, light goes off, fans stop.
Took it in and they replaced the GPU card and PSU. Things were great ... for two weeks. Then suddenly the same symptoms, but at an accelerated rate of occurance. After a day, it did not power on at all save the three seconds of startup fans.
Took it in again. They AGAIN replace the known-faulty ATI Radeon HD2600 XT cards (two), the ones Apple have agreed to replace up to July 2011.
Well got the machine back and she worked like a charm... for two weeks. Same thing now. By the way all checks of hardware, ram, disk drives - extensively have come up OK.
Does anyone have any advice, or have the same problem?
If it is the logic board, is it worth it to replace or when things go south like this is it better to cut your losses as more and more will likely go wrong?
Would appreciate any feedback.
Many thanks

We can't help with your question. How would we know what has gone wrong with your hardware? We don't have access to your machine.
I would take it back, or send it in, to Apple Repair.
I hope you have AppleCare!

Mac pro (2008) won't start - led flashes

it's been a while since i've had a mac issue.
today my mac pro decided not to boot up. the led light by the power button simply flashes and i have no image on my monitor and it doesn't chime at attempted start up. i've scoured the forums and it appears it may be an issue with the RAM and/or video card.
in this thread - https://discussions.apple.com/message/12852794#12852794 - a poster said:
"If the status light still flashes, determine the number of flashes to identify the problem:
• One short flash followed by a longer off period: No valid memory.
• Three short flashes followed by a longer off period: Failed memory."
does anyone know what continuous led flashing might mean?

The conventional way to proceed when you have no chime is to remove all items that may be dragging down the power supply if they were malfunctioning.
Remove:
Hard drives
optical drives
PCI slot cards including the graphics card
all the memory except the minimum -- be sure to remove and re-insert each module that remains, to clear corrosion. If your Mac has separate riser cards, remove and re-insert them as well.
Try to start up again, looking for the chime.
A) If you get the chime, add the graphics card so you can see what is happening. The minimum needed to do something is to start up while holding down the Option key, to run the [all-in-ROM] Startup Manager. It will show a blue screen and an image for each bootable drive (there won't be any yet).
Then add in the optical drive and attempt to boot from an Installer/Utilities DVD appropriate for your Mac, or try the Apple Hardware Test DVD (and hold down the D key as you start up, as it says on the face of the DVD).
B) If you don't get the chime, it's off to the repair shop.

Mac Pro 2008 won't start

I was doing some mixing earlier on today and my Mac Pro and it was working fine.
I then come home and go to turn it on and there are these green lines in groups of 3 across my screen. No idea whats going on. My computer then crashes and won't go any further and says hold down power button to turn off the computer. I have tried to run in safe mode, it won't let it happen. I have resetting PRAM.
Has anyone had this problem before? Is my graphics card dead? Any info would be much appreciated.
It is a 2008 Mac Pro 8core, if that helps at all.

Hi-
Welcome to Discussions!
Will it boot to the original software disc with the Apple hardware Test on it?
If so, run the test.
there are these green lines in groups of 3 across my screen.
Could be the graphics card.

HT3964 Mac Pro 2008 Why No start up?

Changed power supply, started once...closed down and now unable to start up!!!

Barry, thanks for your reply. Yes, that's what I mean when I wrote:
"In System Preferences, I can see every single possible Startup Drive, but no matter which one I select, the same gray screen happens on boot up."
I selected a default startup volume in sys preferences, closed it, and restarted. I tried every volume possible in turn.
But thanks for doublechecking

On my Mac Pro how can I get voiceover to start reading at a specific point on a document?, on my Mac Pro how can I get voiceover to start reading at a specific point on a document?

On my Mac Pro how can I get voiceover to start reading at a specific point in a document, and then continue on to the next paragraph and so on? Thank you. Ed

Welcome to the Apple family!!!!
How can I cause the VO cursor(box) show-up/start?
Press Control-Option and F5. The F5 key is located on the top row of keys 6th key over. This is a toggling "Keyboard Shortcut" for turning VoiceOver on and off.
How can I move the VO cursor to various sentences or paragraphs of an article and have it start reading ... and perhaps even continue reading on to the next paragraph(s) ... even to the end of the article?
How to read a website with VoiceOver
Step 1: Go to the Website
A quick keyboard shortcut is Command-L. This will jump you up to the address bar. Start typing where you want to go. i.e "www.thewebsite.com"
Step 2: Working with Webpage
VoiceOver will automatically start reading the website. You can pause the speech by hitting the 'Control Button'.
If VoiceOver does not being reading the webpage, then you might have to "Interact" with it. If VoiceOver say "HTML Content" then press Control-Option-Space-Down Arrow to interact with the webpage.
Use Control-Option-Right Arrow to move throught the website. This will speak "EVERYTHING" on the page.
Most website that I've found have their articles labeled as 'Heading'. You can jump from heading to heading, by pressing Control-Option-Shift-H.
If you'd like an itemized alphabetical listing of the site, press Control-Option-I
Press Control-Option-Space on the link or article you want to view.
Step 3. Reading from Top to Bottom
Once you found and clicked on the the article/link, use the same 'Heading' command, Control-Option-Shift-H to find the title.
After finding the title, press Control-Option-A will start reading from the title on.
Note: If there are any other items (ads, pictures, etc) it will read those too.
Tip: You might be able to activate a feature called the 'Reader'. The Reader isolates the article and elimanates the ads The keyboard command is Shift-Command-R. You can also find it in the Menu Bar (Command-Option-M) under the word 'View' then 'Show Reader'.
I am using a MACPro with OSX, probably Mavericks 10.9 (where would I look to see if that is the correct information?)
You can find this information under the 'Apple menu' in the Menu Bar. To access the Menu Bar, press Control-Option-M.
Go to Apple Menu > About This Mac. This will open up another window. Use Control-Option-Right Arrow until you hear 'Version'. If you purchased it brand new from Apple within the last six month, more than likely you have Mavericks.
Recommanded Articles.
AppleVis- Commonly used Keyboard Commands
Chapter 2: Learning VoiceOver Basics
Chapter 6: Browsing the internet
Apple Accessibility Resource Page
The 'Commands Help' Voiceover Menu. Control-Option-H-H. (hit H twice) is my best friend. It's a searchable VoiceOver Menu with most of the VoiceOver command. Example: You are looking for the 'Read Current Paragraph' keyboard command. Press Control-Option-H-H and then type Paragraph. It will then bring up all the commands with the word paragraph. I believe there are three.
As from the Trackpad Commands, I've copied and pasted below from Appendix A: Commands and Gestures
VoiceOver standard gestures
If you’re using a Multi-Touch trackpad, you can use VoiceOver gestures. VoiceOver provides a set of standard gestures for navigating and interacting with items on the screen. You can’t modify this set of gestures.
NOTE:Gestures that don’t mention a specific number of fingers are single-finger gestures.
General
Enable the Trackpad Commander and VoiceOver gestures
VO-Two-finger rotate clockwise
Disable the Trackpad Commander and VoiceOver gestures
VO-Two-finger rotate counterclockwise
Turn the screen curtain on or off
Three-finger triple-tap
Mute or unmute VoiceOver
Three-finger double-tap
Navigation
Force the VoiceOver cursor into a horizontal or vertical line when you drag a finger across the trackpad
Hold down the Shift key and drag a finger horizontally or vertically
Move the VoiceOver cursor to the next item
Flick right
Move the VoiceOver cursor to the previous item
Flick left
Move content or the scroll bar (depending on the Trackpad Commander setting)
Three-finger flick in any direction
Go to the Dock
This gesture moves the VoiceOver cursor to the Dock wherever it’s positioned on the screen
Two-finger double-tap near the bottom of the trackpad
Go to the menu bar
Two-finger double-tap near the top of the trackpad
Open the Application Chooser
Two-finger double-tap on the left side of the trackpad
Open the Window Chooser
Two-finger double-tap on the right side of the trackpad
Jump to another area of the current application
Press Control while touching a finger on the trackpad
Interaction
Speak the item in the VoiceOver cursor or, if there isn’t an item, play a sound effect to indicate a blank area
Touch (includes tap or dragging)
Select an item
Double-tap anywhere on the trackpad
You can also split-tap (touch one finger and then tap with a second finger on the trackpad)
Start interacting with the item in the VoiceOver cursor
Two-finger flick right
Stop interacting with the item in the VoiceOver cursor
Two-finger flick left
Scroll one page up or down
Three-finger flick up or down
Escape (close a menu without making a selection)
Two-finger scrub back and forth
Increase or decrease the value of a slider, splitter, stepper, or other control
Flick up (increase) or flick down (decrease)
Text
Read the current page, starting at the top
Two-finger flick up
Read from the VoiceOver cursor to the end of the current page
Two-finger flick down
Pause or resume speaking
Two-finger tap
Describe what’s in the VoiceOver cursor
Three-finger tap
Change how VoiceOver reads text (by word, line, sentence, or paragraph)
Press the Command key while touching a finger on the trackpad
Rotor
Change the rotor settings
Two-finger rotate
Move to the previous item based on the rotor setting
Flick up
Move to the next item based on the rotor setting
Flick down
To customize other gestures by assigning VoiceOver commands to them, use the Trackpad Commander.
Assigning VoiceOver commands to gestures
If you need a reminder about what a gesture does, press VO-K to start keyboard help, and then use the gesture on the trackpad and listen to the description.
Learning about keys, keyboard shortcuts, and gestures
Sorry lots of information. Enjoy. You

Mac Pro 2008 Apple Cinema Displays are black and there are start up issues

I have a Mac Pro 2008 Dual quad 2.8 GHz. I have two Apple Cinema Displays (graphics are the standard ATI Radeon HD 2600 – 2 dual link DVI. I have 4 2-GB RAM sticks (8 GB total).
Neither of my displays are showing anything. Their power lights are on but they are completely black throughout the start up process. In addition when I try to boot up with both graphics cards installed, I get nothing – no beeps no chimes. If just one card is installed (either card in either slot) the computer beeps, chimes and makes the sounds of booting up, but not a flicker on the displays. RAM does not seem to be the issue as I have tried booting with several configurations of RAM sticks with no negative or positive effects. I tried booting up with Hard Drives 1 & 2 removed with no effect. I have tried several different start up moods and have reset PRAM.
My guess is that there is something wrong with the motherboard. Or is it possible that both graphics cards are bad?

The "least intensive" thing you can do is hold down Alt/Option at Startup. Thsi invokes the all-in-ROM Startup Manager, which will light up the screen gray or blue, then attempt to draw an Icon for each potentially-bootable Volume attached (if any). It works as if in slow motion, so you must be patient. If no activity after about two minutes you may count that as a failure.
The next most intensive is to attempt to boot from an incorruptible source of software, such as an Installer/Utilities DVD. This again uses the "one-size-fits-all" display driver, and attempts to load software off the DVD. The dark colored Apple is loaded off a drive -- it is not present inside your Mac.
The next most intensive step is to attempt to boot into Safe Mode. This also uses the "one-size-fits-all" display Driver, and does a disk check as it starts up, adding five minutes to the startup time. It then drwas a login screen and deamds your username and password, even if you normally auto-login.

I install LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it. But the popup keeps on coming with the old name.

I installed LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it with less than 7 karakters. But the popup keeps on coming with the old name.

I have a BT Infinity router plugged into the Time Capsule, not sure where the radio settings are?
They are able to use the network settings of the TC i.e. they can connect to the internet via the wifi through the TC but when they try and connect to the AirPort Disk this is where it is not allowing a connection.
I don;t have the drive shared out at all at the moment, is this necessary? How do I do this if so?
I have attached the screen shots of all the settings.
Thanks again for your help.

My mac book air can't start installation, because i use windows installation in DOS to make partion, now no mac os on it. How to get back the mac os? i have a window based iso image from a friend, because in my country there is no Apple service.

my mac book air can't start installation, because i use windows installation in DOS to make partion, now no mac os on it. How to get back the mac os? i have a window based iso image from a friend, because in my country there is no Apple service.

It sounds like you destroyed your boot partition and the recovery partition. Depending on it's age, your MacBook Air might be able to do a net boot. Plug and ethernet connection into it and attempt to boot. If it has the right firmware, it will find a net boot configuration on the net and boot that. Then it will give you a Recovery Partition like display and allow you to reinstall the OS X version that came with it.... assuming that it was Lion or ML. If your computer came with Snow Leopard, then even the net boot won't work.
At that point you need a bootable USB Key, or an external DVD drive AND a Snow Leopard installation DVD.
An Apple Store, if there is one nearby, MAY be able to get you going again. However, whatever is on the SSD now will be toast too.

Hi, i have a A1186 Mac Pro 2008 Tower. Im running windows 7 64Bit on it. Im not sure about what version of bootcamp should i use to get the drivers. Someone please help me.

Hi, i have a A1186 Mac Pro 2008 Tower. Im running windows 7 64Bit on it. Im not sure about what version of bootcamp should i use to get the drivers. Someone please help me.

Boot Camp support:
http://www.apple.com/support/bootcamp/
Boot Camp FAQ:
http://support.apple.com/kb/HT5639?viewlocale=en_US

Mac Pro 2008 always crash after sleep and after first start

Hello, new in the forum,
2 years ago, I replaced the main disk of a Mac Pro 2008 for a SSD Samsung 470 256 Go.
Until then, it always crashed 1 or 5 minutes after sleep mode (which I didn't used much), and not always 10 to 15 minutes after the first start of the day.
No matter if I was working on it or not… Suitcase installed or not (no font problem here). Rest of the day was fine (if no sleep !).
The difference of speed was so big and "good" that I dealed with it. I though that the Mac Pro was a little old for the SSD technology, and that Apple would fix it, with chance…
2 weeks ago, I installed Maverick :
I got crashs during the work flow too. I needed to re-start 3 times at least… Re-start without extension was ok (or not), re-start, crash, re-start without extension, restart ok. I used Onyx, did PRAM too. And sometimes, I needed to re-install Maverick or even to do a clean-install !
So I suspected the Samsung 470 for all (sleep and work crashs) and replaced it for a Samsung 840 Pro 512 Go.
And the Mac Pro returned to Mountain Lion.
Not really better : no crash one day (yeeeees!) and crash after the first start the next day (nooooo!). Every time I tested sleep mode, it crashed.
My system :
Mac Pro 3.1 - 2,8 GHz - Quad
Mountain Lion, 10 Go ram DDR2, ATI Radeon HD 2600 XT, 30' cinema display.
Adobe CS5 alone (minimal install) with Onyx to repair after each crash.
Could it be the video card, the mother board, the age of the boy ?
Thanks a lot !
Christophe S

Edit !
I said that Finder and apps were blocked after 10 seconds (without extension).
But it was to clic on Launchpad that blocked all, and 5 minutes later it works again.
I did clic again on Launchpad, it blocked and 2 minutes later it appeared full screen but with rainbow circle, and quit.
- Restarted with extensions. Kernel panic!
- Restarted the mac and the grey screen with Apple blocked, without any mouse this time. 15 minutes later, still blocked.
- Forced restart without extension. Here are the reports of Kernel Panic and EtreCheck:
Kernel Panic Report:
Interval Since Last Panic Report: 122463 sec
Panics Since Last Report:          1
Anonymous UUID:                    52E60929-F5AE-D9CD-04B0-1872526C0821
Mon Oct 13 10:58:17 2014
panic(cpu 3 caller 0xffffff8007cb8945): Kernel trap at 0xffffff8007ef69e0, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x000000000000008a, CR3: 0x000000002f749000, CR4: 0x0000000000000660
RAX: 0xffffff80209bb7e8, RBX: 0xffffff801fc6d808, RCX: 0x0000000009000000, RDX: 0xffffff801fc6dde0
RSP: 0xffffff8131b7bbc0, RBP: 0xffffff8131b7bc00, RSI: 0x00000000000c43ff, RDI: 0xffffff801fc6dde0
R8: 0x0000000000000000, R9: 0x0000000000000000, R10: 0xffffff80220fbfa4, R11: 0x0000000000000020
R12: 0xffffff801fc6dde0, R13: 0x00000000000c43ff, R14: 0x00000000000c43ff, R15: 0x0000000000000002
RFL: 0x0000000000010202, RIP: 0xffffff8007ef69e0, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x000000000000008a, Error code: 0x0000000000000000, Fault CPU: 0x3
Backtrace (CPU 3), Frame : Return Address
0xffffff8131b7b860 : 0xffffff8007c1d636
0xffffff8131b7b8d0 : 0xffffff8007cb8945
0xffffff8131b7baa0 : 0xffffff8007ccebfd
0xffffff8131b7bac0 : 0xffffff8007ef69e0
0xffffff8131b7bc00 : 0xffffff8007eee0d6
0xffffff8131b7be00 : 0xffffff8007d1a5d6
0xffffff8131b7be60 : 0xffffff8007d092aa
0xffffff8131b7bf50 : 0xffffff8007fe97ba
0xffffff8131b7bfb0 : 0xffffff8007ccf453
BSD process name corresponding to current thread: mdworker
Mac OS version:
12F45
Kernel version:
Darwin Kernel Version 12.5.0: Sun Sep 29 13:33:47 PDT 2013; root:xnu-2050.48.12~1/RELEASE_X86_64
Kernel UUID: EA38B02E-2B88-309F-BA68-1DE29F605DD8
Kernel slide:     0x0000000007a00000
Kernel text base: 0xffffff8007c00000
System model name: MacPro3,1 (Mac-F42C88C8)
System uptime in nanoseconds: 121192507210
last loaded kext at 8889944220: com.apple.driver.AudioAUUC 1.60 (addr 0xffffff7f899fe000, size 28672)
loaded kexts:
com.apple.driver.AudioAUUC 1.60
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleHDAHardwareConfigDriver 2.4.7fc4
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.iokit.IOBluetoothSerialManager 4.1.7f4
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleHDA 2.4.7fc4
com.apple.driver.AppleUpstreamUserClient 3.5.12
com.apple.driver.AppleMCCSControl 1.1.11
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.kext.AMDFramebuffer 8.1.6
com.apple.driver.AppleUSBDisplays 357
com.apple.iokit.CSRBluetoothHostControllerUSBTransport 4.1.7f4
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.ATIRadeonX2000 8.1.6
com.apple.driver.ApplePolicyControl 3.4.5
com.apple.driver.AppleSMBusPCI 1.0.11d1
com.apple.driver.AppleLPC 1.6.3
com.apple.driver.AppleMCEDriver 1.1.9
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.CSRHIDTransitionDriver 4.1.7f4
com.apple.driver.PioneerSuperDrive 3.3.1
com.apple.iokit.SCSITaskUserClient 3.5.6
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.3.5
com.apple.driver.AppleUSBHub 635.4.0
com.apple.driver.AppleIntel8254XEthernet 3.1.1b1
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.driver.AppleAHCIPort 2.6.6
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBEHCI 621.4.6
com.apple.driver.AppleUSBUHCI 621.4.0
com.apple.driver.AppleACPIButtons 1.8
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.8
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 214.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2.1
com.apple.driver.AppleIntelCPUPowerManagement 214.0.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.driver.DspFuncLib 2.4.7fc4
com.apple.iokit.IOAudioFamily 1.9.2fc7
com.apple.kext.OSvKernDSPLib 1.12
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.iokit.IOSurface 86.0.4
com.apple.iokit.IOBluetoothFamily 4.1.7f4
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.1.7f4
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleHDAController 2.4.7fc4
com.apple.iokit.IOHDAFamily 2.4.7fc4
com.apple.driver.AppleGraphicsControl 3.4.5
com.apple.iokit.IONDRVSupport 2.3.7
com.apple.kext.AMD2600Controller 8.1.6
com.apple.kext.AMDSupport 8.1.6
com.apple.iokit.IOGraphicsFamily 2.3.7
com.apple.driver.AppleSMC 3.1.5d4
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.4.1d13
com.apple.driver.AppleUSBHIDMouse 175.8
com.apple.driver.AppleHIDMouse 175.8
com.apple.driver.AppleUSBHIDKeyboard 170.2.4
com.apple.driver.AppleHIDKeyboard 170.2.4
com.apple.iokit.IOUSBHIDDriver 623.4.0
com.apple.driver.AppleUSBMergeNub 621.4.6
com.apple.driver.AppleUSBComposite 621.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.6
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOATAPIProtocolTransport 3.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.6
com.apple.iokit.IOUSBUserClient 630.4.4
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.5.1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOATAFamily 2.5.1
com.apple.iokit.IOUSBFamily 635.4.0
com.apple.driver.AppleEFINVRAM 2.0
com.apple.iokit.IOHIDFamily 1.8.1
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220.3
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 345
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.8
com.apple.iokit.IOPCIFamily 2.8
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: MacPro3,1, BootROM MP31.006C.B05, 8 processors, Quad-Core Intel Xeon, 2.8 GHz, 10 GB, SMC 1.25f4
Graphics: ATI Radeon HD 2600 XT, ATI Radeon HD 2600, PCIe, 256 MB
Memory Module: DIMM Riser B/DIMM 1, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x02FE, 0x47523244463247425838454C3830304E3252
Memory Module: DIMM Riser B/DIMM 2, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x02FE, 0x47523244463247425838454C3830304E3252
Memory Module: DIMM Riser A/DIMM 1, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser A/DIMM 2, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser A/DIMM 3, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x02FE, 0x47523244463247425838454C3830304E3252
Memory Module: DIMM Riser A/DIMM 4, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x02FE, 0x47523244463247425838454C3830304E3252
Bluetooth: Version 4.1.7f4 12974, 3 service, 12 devices, 0 incoming serial ports
PCI Card: ATI Radeon HD 2600, sppci_displaycontroller, Slot-1
Serial ATA Device: Samsung SSD 840 PRO Series, 512,11 GB
Serial ATA Device: ST31000524AS, 1 TB
Parallel ATA Device: PIONEER DVD-RW DVR-112D
USB Device: hub_device, apple_vendor_id, 0x9120, 0xfd500000 / 2
USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfd520000 / 4
USB Device: Apple Optical USB Mouse, apple_vendor_id, 0x0304, 0xfd521000 / 6
USB Device: Apple Keyboard, apple_vendor_id, 0x0221, 0xfd522000 / 5
USB Device: Apple Cinema HD Display, apple_vendor_id, 0x9220, 0xfd530000 / 3
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8206, 0x5d200000 / 2
FireWire Device: built-in_hub, 800mbit_speed
FireWire Device: unknown_device, unknown_speed
Report EtreCheck :
Description du problème :
Here is the report of EtreCheck after the Kerner Panic sent before.
Christophe.s
EtreCheck version : 2.0.2 (86)
Rapport créé 13 octobre 2014 11:23:31 UTC+02:00
Informations matérielles : ℹ️
Mac Pro (début 2008)
Mac Pro - modèle : MacPro3,1
2 2.8 GHz Quad-Core Intel Xeon CPU : 8-core
10 GB RAM Pas extensible
DIMM Riser B/DIMM 1
2 GB DDR2 FB-DIMM 800 MHz ok
DIMM Riser B/DIMM 2
2 GB DDR2 FB-DIMM 800 MHz ok
DIMM Riser A/DIMM 1
1 GB DDR2 FB-DIMM 800 MHz ok
DIMM Riser A/DIMM 2
1 GB DDR2 FB-DIMM 800 MHz ok
DIMM Riser B/DIMM 3
empty empty empty empty
DIMM Riser B/DIMM 4
empty empty empty empty
DIMM Riser A/DIMM 3
2 GB DDR2 FB-DIMM 800 MHz ok
DIMM Riser A/DIMM 4
2 GB DDR2 FB-DIMM 800 MHz ok
Bluetooth: Vieux - Handoff/Airdrop2 pas disponible
Informations vidéos : ℹ️
ATI Radeon HD 2600 - VRAM : 256 MB
Cinema HD Display 2560 x 1600
Logiciel du système : ℹ️
OS X 10.8.5 (12F45) - Uptime: un jour 0:11:6
Informations des disques : ℹ️
Samsung SSD 840 PRO Series disk0 : (512,11 GB)
Statut S.M.A.R.T. : Vérifié
disk0s1 (disk0s1) <non monté> : 210 Mo
MacPro SSD (disk0s2) / [Startup] : 511.25 Go (472.61 Go libre)
Recovery HD (disk0s3) <non monté> [Restauration] : 650 Mo
ST31000524AS disk1 : (1 TB)
Statut S.M.A.R.T. : Vérifié
disk1s1 (disk1s1) <non monté> : 210 Mo
MacPro 1To (disk1s2) /Volumes/MacPro 1To : 999.35 Go (633.08 Go libre)
Recovery HD (disk1s3) <non monté> [Restauration] : 650 Mo
Informations USB : ℹ️
Verbatim Portable USB Drive 320,07 GB
Statut S.M.A.R.T. : Vérifié
disk3s1 (disk3s1) <non monté> : 210 Mo
320 Go Christophe Syren (disk3s2) /Volumes/320 Go Christophe Syren : 319.73 Go (313.64 Go libre)
USB 2.0 USB Flash Drive 8,17 GB
Statut S.M.A.R.T. : Vérifié
SANS TITRE (disk2s1) <non monté> : 8.17 Go
Apple, Inc. Keyboard Hub
Mitsumi Electric Apple Optical USB Mouse
Apple, Inc Apple Keyboard
Apple Inc. Bluetooth USB Host Controller
Gatekeeper : ℹ️
Mac App Store et développeurs identifiés
Représentants de lancement : ℹ️
[désengagé] com.adobe.AAM.Updater-1.0.plist Aide
[désengagé] com.adobe.CS5ServiceManager.plist Aide
[désengagé] com.extensis.FMCore.plist Aide
Daemons de lancements : ℹ️
[invalid?] com.adobe.SwitchBoard.plist Aide
Représentants de lancement pour l’utilisateur : ℹ️
[désengagé] com.adobe.AAM.Updater-1.0.plist Aide
[désengagé] com.adobe.ARM.[...].plist Aide
Éléments Ouverture : ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox Application (/Applications/Dropbox.app)
Plug-ins internet : ℹ️
OfficeLiveBrowserPlugin : Version : 12.3.6 Aide
AdobePDFViewer : Version : 9.5.5 Aide
QuickTime Plugin : Version : 7.7.1
JavaAppletPlugin : Version : 14.9.0 - SDK 10.7 Vérifier la version
Panneaux de préférences de 3ème partie : ℹ️
Growl Aide
Time Machine : ℹ️
Skip System Files: NO
Sauvegarde automatique : OUI
Disques sauvegardés :
MacPro SSD : Taille de disque : 511.25 Go Disque utilisé : 38.64 Go
Destinations :
Data [Network]
Taille totale : 2 To
Nombre de sauvegardes total : 9
Sauvegardes la plus agée : 2014-10-08 01:39:21 +0000
Dernière sauvegarde : 2014-10-10 11:31:35 +0000
Taille de la disque de sauvegarde : Excellent
Taille de sauvegarde 2 To > (Taille de disque 511.25 Go X 3)
L’utilisation du CPU par processus : ℹ️
      1% WindowServer
      0% ps
      0% fontd
      0% System Events
      0% coreservicesd
L’utilisation de la mémoire par processus : ℹ️
97 Mo Dock
97 Mo Finder
75 Mo WindowServer
64 Mo com.apple.security.pboxd
64 Mo CalendarAgent
Informations de la mémoire virtuelle : ℹ️
523 Mo RAM Disponible
1.04 Go RAM Active
307 Mo RAM Inactive
8.86 Go RAM Résidente
266 Mo Pages entrants
0 o Sorties pages

Mac Pro 2008 Can't start Windows 7 / 8 Installer

Similar Messages

Maybe you are looking for