Mac Pro 2008 Install Blu-Ray Internal ODD Port?

Hello everything together I has the LG GGW h 20 L Blu Ray and would like the burner to internal port to attach, but that unfortunately cannot be done. Toast detects the burner however it can only CDs and DVDs burning and no Blu-Ray, I have myself an PCI x Card bought with the SIL 3132 chip record, but
this does not want to function so correctly. What can I make? Greeting
from Frankfurt
My System Mac Pro 2008 2x2,8 2 TB HD end 16 GB Ram

The PCI card might be causing your issues. There are 2 SATA ports on the Mac Pro's motherboard that you can attach the drive to, but it can be tricky trying to reach them. Also, make sure you have the latest version of Toast. The minimum requirement is version 8, but version 9 is recommended.

Similar Messages

  • Install Blu ray internal burner in G5 that has an IDE set up?

    Hello,
    Is it possible to install an internal SATA Blu-Ray burner into a Power Mac G5 that uses an IDE set up for its optical drive by using the current SATA and power cables that are used for the internal slave SATA drive? We would have to use longer SATA and power cables to reach the Blu-Ray drive. Is this possible?
    Thanks,
    Jordan

    Or easier, they make IDE to SATA converters...
    http://www.satagear.com/st-106SATAConverter.html

  • Bought Mac Pro in San Francisco and I'm now located in remote area in China. Need to know does a Mac Pro 15 play Blue Ray Disc from History Channel. My unit rejects them.

    Bought a Mac Pro 15 in San Francisco, but I'm now located in a remote area of China. I would like to know if the Mac Pro 15 can play a commercially produced Blue Ray disc from the History Channel. My unit rejects them. Other disc by Pixar, Disney which are not designated Blue Ray work. I was told when I bought the Mac Pro it play

    No they don't unless You buy an external BD-burner with Playback program (if they ever exist).
    As it looks like Apple is leaving the DVD disk format too so Blu-Ray is not on the list as I read Mac Worlds and alike.
    I use a PlayStation 3 - and it works very well.
    Yours Bengt W

  • Mac Pro 2008 won't boot from install disc - black screen

    Hello,
    I recently purchased a new hard drive to replace the original that came with my Mac Pro 2008.  I was able to format the new drive using Disk Utility. I am now at the point where I need to install OS X onto the new drive, but the computer refuses to boot from the disc. The disc is recognized by the computer (I can access the disc and am able to use the BootCamp applications, etc.) but I just get a black screen when trying to boot directly from the disc. The computer boots fine otherwise.
    I have tried the following:
    I have tried using both the gray install disc that came with the computer and the Snow Leopard Install DVD disc.
    I have tried booting using the "C" key and the "option" key but still receive a black screen following the chime (I've held these down for several minutes).
    I have tried restarting from either install disc using the Bootcamp Assistant.
    I have tried running the installation software to get it to restart from the disc.
    I have tried a combination of the drives, i.e. trying to boot from the discs with just the new drive installed, just the original drive installed, and with both in bay1 and 2.
    Everything results in the computer starting up, hearing the chime, and then nothing..just black screen. I have the original drive partitioned with BootCamp with OSX Snow Leopard and Windows 7 installed (I don't know that that matters).
    I am at a loss as to what to try next. It doesn't seem like the superdrive because it is recognizing the disc, it just won't boot from it.
    Any help is appreciated, thank you.

    Clone should be a must  and easy to do and learn (learn by doing! 2)
    6800 would 'qualify' as 5x70 series flashed etc and same rule: 10.6.5
    In the past there was 10.4.6, 10.5.6, but not 10.6.6 - even though strong need for such a DVD.
    10.6.8 DVD would  be excellent
    Lion or ML - buy, download, make an installer flash card would be what I would do at this point.
    Then keep both - dual boot as you learn and test and see what ML does and waht you had that required Rosetta to support PowerPC. See www.roaringapps.com about that.
    With Carbon Coyp Cloner - was share, now commercial, great utility been around since 10.2.2 at least - this time 2003. 10 yrs.
    You can clone the system folders, you can even selectively choose. You can skip copy of most of your home account and do that separately to another drive if  you want.
    Clone Windows with Paragon or WinClone and use Windows 7 or 8 DVD to do a system repair (automatic) or to edit the BCD file. It can and should - and all you do is boot Windows 7 DVD w/ only the one drive present and go at it. Piece of cake. But yes, Windows gets fussy if you change or remove or move. BCD to the rescue. A proper program for cloning like Paragon's "Clone OS" meant for going from disk drives to SSDs, knows that and how to do it.
    Back to how to clone etc:
    Clone
    Disk utility has RESTORE which will also clone your system but not the Lion Recovery partition. Oddly  Apple did not 'endorse' making bootable clone of the system which works too but most choose Carbon Copy Cloner - it works more consistently; it allows for smart update of the backup volume. Both can backup to a sparse disk image if desired.
    Using Cloning as a Backup Strategy
    http://www.macupdate.com/app/mac/7032/carbon-copy-cloner 
    http://www.bombich.com/software/updates/ccc-3.5.html
    OS X Lion Install to Different Drive
    How to create an OS X Lion installation disc MacFixIt
    Migration Assistant Update for Mac OS X Snow Leopard
    http://www.apple.com/support/lion/installrecovery/
    Create an OS X Lion Install disc
    http://reviews.cnet.com/8301-13727_7-20080989-263/how-to-create-an-os-x-lion-ins tallation-disc
    How to clone your system:
    http://macperformanceguide.com/Mac-HowToClone-backup.html
    http://macperformanceguide.com/Mac-HowToClone.html
    http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
    http://www.macperformanceguide.com/blog/2012/20120711_2-MacPro-internal-clone-ba ckup.html
    The DVD is dependent on your hardware. And your hardware changed. The drivers for the 5780 and 6xxx are bundled in the OS and lacking. Minimum build thing.
    Put the new drive anywhere you want. Does not matter. Can move it later. Can be drive bay 0-3 or a Firewire external or under the DVD drive.
    When you clone pull the old drive and boot from the newly cloned.
    After that keep a backup clone around all the time. Takes less than 10 minutes to do a smart update to copy just the changes to keep it current. So you have working copy of the system. I keep Clone "A" that I keep "as was" the system as of last month or whatever (like 10.7.4 before upgrade to 7.5).
    Comes easier after doing it once and have all your ducks in a row.

  • I install LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it. But the popup keeps on coming with the old name.

    I installed LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it with less than 7 karakters. But the popup keeps on coming with the old name.

    I have a BT Infinity router plugged into the Time Capsule, not sure where the radio settings are?
    They are able to use the network settings of the TC i.e. they can connect to the internet via the wifi through the TC but when they try and connect to the AirPort Disk this is where it is not allowing a connection.
    I don;t have the drive shared out at all at the moment, is this necessary?  How do I do this if so?
    I have attached the screen shots of all the settings.
    Thanks again for your help.

  • Cannot install Vista Ultimate 64bits on Mac Pro 2008

    Hello,
    I'm trying to install Vista Ultimate 64bits on my new Mac Pro (2008, 2x Quad Core, 3x 500GBHDD, 16 GB Ram), but Vista is unable to find a correct partition type.
    The first thing I did was to install a 4th HD, and I constantly received an error 0x80004005 which seems to be too generic.
    Then I tried to install it on the 3rd HD (Bay 2 is where my OS X startup disk is located btw) but here no way neither....Windows cannot find a valid partition.....
    I tried to partition it manually in MBR...same problem....
    Then with BootCamp assistant...same problem...
    I also tried to use Vista Business 64 SP1, same problem...
    Do you have any idea ?
    Thanks,
    Patrick

    Hello,
    Thanks for your answer, but unfortunately I'm still stuck...
    To resume the situation :
    I put a brand new 250GB SATA in the bay 4.
    I start Bootcamp Assistant and tell him that I want to use this new disk for Windows and then start Vista x64 install.
    Vista sees 2 partitions on this new disk :
    Disk 3 Partition 1 : 200 MB (Primary)
    Disk 3 Partition 2 : 230 GB (Primary)
    If I try to use the P2 for the install, I have to format it first. Once formatted, Vista says : This computer's hardware may not support booting to this disk. Ensure that the disk controller is enabled in the computer's BIOS menu.
    If I try to use the 200 MB (just for fun..), then I also have to format it, but here I receive the error message 0x8000xxxx
    So clearly I'm lost...
    Could it be related to the 16 GB RAM ? Too much for Vista ?? I don't believe as this is Vista x64...
    Thanks for your help, ideas..
    Patrick

  • Can i install a usb 3.0 pci express card in a mac pro 2008

    Can I install a PCI express USB 3.0 card in my Mac Pro 2008?  Will it support the higher speed?

    No.

  • My Mac pro 2008, not running after the Apple logo, i rebooting and i rebooting

    My Mac Pro 2008 no boot afther the Logo Apple, reboot, reboot and reboot only, and in XP, the graphic is pertubed with bad graphics ... the mémory it's good, and i thinks my card graphic is out. SRY for my english, it's not my language. Help my please, my apple care is finished 10/2011, and i will repared itself. Many thanks. Alain Muno

    Not saying this IS your problem, but … I just went through avery similar problem with Mac Pro3,1. Here is my story.
    On boot of any Mac OP system drive, internal or externalHDD, (Lion or Snow Leopard), original Mac Pro install CD, Snow Leopard CD,nothing.  (Would only go to gray screen,apple logo, spinning gear that would stop spinning after about a minute.)  But, it would boot on XP drive.  However, in XP, on Windows black startupscreen, had alternating columns of two different patters of blue dots and XPgraphics were not as they should be (larger icons on desk top, slow response,different size of desk top (maybe 600x400 when it should have been1024x768).  Supplied hardware test showedno failures.  Took it to shop.  Their better diagnostics showed nofailures.  All peripherals (my drives, myCDs, etc, disconnected.  (NOTE: they didnot try a new video card since they did not have one.)  Still would not start even using their drives(external or internal).  Shop tried a newlogic board.  That did not work and theyput the original one back in.  Shop saidall they could come up with was new processors. This was not a cost effective option and they had none to try.
    After thinking about it more, I figured it could be thevideo card: the original 8800 GT that came with the Mac: that it was so bad itwould not start in Mac OS but would limp along in XP.  I was all set to buy another vid card one-bay just to try.  While doing thatresearch, came across several articles on the Internet that discussed vid cardfailure due to micro-cracks in some solder joints.  These develop due to age/heat cycles.  The proposed fix was to ‘reflow’ the solder.  Figured it was worth a try before spendingthe money on a new vid card.  Found thesedetailed instructions on youtube.  http://www.youtube.com/watch?v=T7um_hZYom4  I followed the procedure, put the vid cardback in, and now it works just fine.
    I did not and would not do this until I had ruled outeverything else.  But, it has worked forothers and it did work for me.

  • Final Cut Pro X witch Blu-ray Burner are you using ...

    Using a Mac Pro Tower like the Mac Pro 2012 or similar what are the Blu-ray Internal Burners do you use ; LG or Pioneer , witch Model Number.
    Creating Blu-ray on the Mac is fantastic but witch brand and model numbers for the Big Mac Pro Tower are you using with exellent results now.
    On the Mac Apple Pro Apps or Roxio Toast Titanium are the only left options who are current and updated , but burners specified for Windows.
    Frustration come when you talk to Apple they say not supported , Burners makers LG or Pioneer will say we dont offer support on the Mac.
    Well if you can create Blu-ray on the Mac but cant get any help to burn it it is very frustrating and Not So Pro if Apple care for the Pro Users.

    I use the new Mac Pro 2013. Final Cut Pro X version 10.1.4 and Maverick OS 10.9.5. An external Blu-ray burner LG BE14NU40. I've use single burn Blu-ray discs from brands like Maxell and Verbatim. That works fine. I have double layers Blu-ray discs not tried. I use it for home video’s.
    DVD single works fine too. DVD double layers I have not tried but will also work i think. Reviews on LG USA stated that Roxio Titanium with corresponding plugin works.
    I'm glad I found a blu-ray burner that works with FCPX.  Compressor 4.1.3 but I have not been working with the LG burner. Not yet!

  • Mac Pro 2008 Apple Cinema Displays are black and there are start up issues

    I have a Mac Pro 2008 Dual quad 2.8 GHz. I have two Apple Cinema Displays (graphics are the standard ATI Radeon HD 2600 – 2 dual link DVI. I have 4 2-GB RAM sticks (8 GB total).
    Neither of my displays are showing anything. Their power lights are on but they are completely black throughout the start up process. In addition when I try to boot up with both graphics cards installed, I get nothing – no beeps no chimes. If just one card is installed (either card in either slot) the computer beeps, chimes and makes the sounds of booting up, but not a flicker on the displays. RAM does not seem to be the issue as I have tried booting with several configurations of RAM sticks with no negative or positive effects. I tried booting up with Hard Drives 1 & 2 removed with no effect.  I have tried several different start up moods and have reset PRAM.
    My guess is that there is something wrong with the motherboard. Or is it possible that both graphics cards are bad?

    The "least intensive" thing you can do is hold down Alt/Option at Startup. Thsi invokes the all-in-ROM Startup Manager, which will light up the screen gray or blue, then attempt to draw an Icon for each potentially-bootable Volume attached (if any). It works as if in slow motion, so you must be patient. If no activity after about two minutes you may count that as a failure.
    The next most intensive is to attempt to boot from an incorruptible source of software, such as an Installer/Utilities DVD. This again uses the "one-size-fits-all" display driver, and attempts to load software off the DVD. The dark colored Apple is loaded off a drive -- it is not present inside your Mac.
    The next most intensive step is to attempt to boot into Safe Mode. This also uses the "one-size-fits-all" display Driver, and does a disk check as it starts up, adding five minutes to the startup time. It then drwas a login screen and deamds your username and password, even if you normally auto-login.

  • Mac Pro doesn't recognize any internal drive

    My Mac Pro (2008) -- after rebooting -- does not recognize any of the internal drives. I'm running 10.6.8 and all of a sudden after reboot, the machine hangs on grey screen and I get folder w/ question mark symbol. I boot from Snow Leopard install disk but no drive shows up as being able to reinstall on. Even opening up Disk Utility from Snow Leopard disc shows no internal drive.
    Any ideas?

    Just a few additional random thoughts on this Hardware:
    A SATA controller failure should take out all SATA drives. On the 2008 model, the Optical drives are IDE/ATA, but there are two additional SATA ports (data only) on the motherboard.
    In the 2008 and previous models, the Mac Pro RAID card uses a cable called iPass to intercept the essential signals to the four Hard Drive bays and route them through the RAID card. If that iPass cable were to come loose, the four main drive bays would stop working.

  • Replacement mac pro 2008 motherboard

    Hi,
    It looks as if the logic board in my dual quad core 3Ghz mac 2008 mac pro has died.
    Rebooted it last night and I just get the grey screen, apple logo and spinning icon
    Removed all peripherals and network connections - no change
    tried to boot into safe mode and the sequence gets so far and then the machine shuts down
    removed all internal disks apart from system disk - no change
    replaced system disk with backup system disk - no change
    reset the EFI - no change
    removed some 4Gbyte memory DIMMS I'd installed recently - no change
    Took backup system disk into work and put into same age chassis and disk booted just fine.
    So
    1). Found a mac pro 2008 used motherboard for £345 on ebay - eek!!
    2). If all I need is a motherboaed, can I install a newer mac pro motherboard in the chassis I've currently got?
    Rgds
    Alex

    have to agree, $600+ part www.dvwarehouse.com
    sounds like they really did not address (all) the problems and went for a superficial renstall the system with a new drive instead.
    10.7.5 may not be ideal OS for 3,1 2008s
    FBDIMMs are cheap now and higher quality, $64 8GB (I'll bet they soaked you though)
    SMC Reset for won't start
    the OEM graphic card, those are a MUST replace list, esp for 10.7.5 but for anyone too
    10.8.3 makes sense
    you have to avoid any old plugin drivers software now or go back to 10.6.8 which some find more reliable and because they rely on Rosetta to run PowerPC coded software.

  • Adding USB 2.0 ports to a Mac Pro 2008

    Hi,
    I love my Mac Pro 2008! Great machine, awesome performance, but I need more ports Who needs only three USB ports in the back, that's a joke!
    Anyways, I just bought 2 StarTech 6-port USB 2.0 PCI cards from an online vendor, but quickly found out that it didn't fit my Mac. The description of the card even says it is compatible with Mac OS X. I suspect that Apple have changed the PCI slots for something else in the Mac Pro 2008. What are they and can we buy USB card that fit those slots? If so where? I am desperate for more ports.

    You may have stumbled upon or checked some of the support pages?
    http://www.apple.com/support/macpro/
    - which has a link to an article titled "about your PCI Express slots"
    http://docs.info.apple.com/article.html?artnum=304122
    Specs 2008: http://support.apple.com/kb/SP11:
    PCI Express expansion7
    Three open full-length PCI Express expansion slots
    One PCI Express 2.0 x16 slot
    Two PCI Express x4 slots
    And of course support for up to four PCI Express video cards; Fibre Channel; Mac Pro RAID.
    You could install a powered USB hub, or FW/USB2, as long as you have free slots for more. I have FW800, a 1x Sonnet Tempo (couple storage drives), and a 4x Tempo (multiple RAID sets; Port Multiplier card and multi-drive enclosures and 4 channels).

  • Mac Pro 2008 Can't start Windows 7 / 8 Installer

    I'm trying to load Windows 8 (And have previously tried everything with Windows 7) on my Mac Pro early 2008 with Mountain Lion, and cannot get the installers to initiate.
    When I start the bootcamp assistant and reboot, my mac freezes before ever getting to the installer. When I reboot and hold option to manually select the installer, it freezes as soon as I select it. I've tried this from a DVD, USB, and even an install partition i setup on my HD, all with the same freezing results. This is a legitimate copy of Windows 8 system builder I'm working with and have installed it perfectly in Parallels.
    I should note I upgraded my video card a long time ago to a gt 120, so I'm wondering if the video card might be the problem. I've installed Windows 7 with this video card in the past so I'm guessing this is a Mountain Lion/Bootcamp 5 issue.
    Has anyone else with a Mac Pro 2008 succesfully installed Windows 7/8 from Mountain Lion/Bootcamp 5?
    Any input would be immensely appreciated!

    There are no Windows 8 Bootcamp drivers. Windows 8 is not supported.
    Use Parallels or Fusion to install Windows 8. By doing so you eliminate the need for drivers since the virtual machine creates virtual hardware and drivers.
    Once the Windows 8 Bootcamp drivers are developed and released you can then install using Bootcamp Assistant.
    Read this forum. Some people are posting that they had some success with the Bootcamp install. but if you have to rely on your computer then don't take the chance.

  • Intel 320 160gb SSD any issues with mac pro 2008?

    Hi there.
    I have a mac pro 2008.  and Install Intel 320 160gb ssd. and boot...
    It's shows black screen...
    is any one has that issue? I tested that SSD with my old quad mac pro 2007, it works fine...
    Please help me....

    The 2600XT required 10.5.2+ and while it may 'look' like a G5 the Mac Pro is not. G5 refers to IBM PowerPC based, not Intel Xeon EFI based.
    You're running 10.6.3, might want to update your profile itself.

Maybe you are looking for