Mac Pro 2008 - upgrade to 2010 model or not?

I have a Mac Pro 2008 2.8 gHz with 12GB RAM. I'm not running Premiere Pro CS5 which is great and seems to love RAM and processor speed. I also recently got a CUDA card to take advantage of it's GPU acceleration.
My question is: Should I get a new Mac Pro 2010, 6, 8, 12 core or just upgrade my RAM to say, 24GB and perhaps get some SSDs (maybe even in a RAID 0) as my boot drive.
The RAM upgrade will be in the $650 range, SSDs could be at least that. I'll need RAM anyway for a new model as my old RAM isn't compatible.
Getting a new model could set me back $5000 (or more) when it's all loaded.
I'm also a little disappointed in the 2010 Mac Pros, for example my 2008 Mac pro was a no-brainer, but now I'm ambivalent about this upgrade to 2010, thinking there may be new models out this year that fill in all the holes. I kind of feel like the 2010 Mac Pro upgrade was a little like the Final Cut Pro 7 upgrade, it was a stop gap because Apple needed to do something. I could be wrong about this though.
I know this is kind of a difficult question to answer, but if you have any opinions, please feel free to lend any advice.

PCIe 3.0
USB3
Intel SATA3 6G
Socket LGA1356
Socket LGA2011
3G SSD (by the time 4th Gen SSDs are out, one unit would make out our current SATA channel bandwidth)
Mid-range Xeon roadmap:
Socket LGA1356, a direct replacement for the current Socket LGA1366. The parts here are 6-core and 8-core Sandy Bridge single-socket and dual-socket capable but mid-range positioned Sandy Bridge Xeon - and, ultimately, Core i7 - parts with up to 20MB of L3 cache, three DDR3-1600 memory channels just like the existing LGA1366 Westmeres with one memory speed grade higher, and 24 PCIe v3 lanes on-chip.
The single external QPI v2 link runs at up to 8 gigatransfers/sec, or 32GB/sec bidirectional bandwidth, a 25 per cent speed up over the current generation, but also feeding a third more cores on each socket.
http://www.theinquirer.net/inquirer/feature/1811091/2011-intel-xeon-update-holy- socket-trinity
Intel is set to replace its current high-end socket, LGA1366, when it releases its new 8-cores processors in the Late 2011. This socket is expected to be released alongside Sandy Bridge-EX in Q3 2011, and will support 4 memory channels as well as 40× PCIe 3.0 lanes.
http://en.wikipedia.org/wiki/LGA_2011

Similar Messages

Mac Pro 2008 and ATI Radeon HD 5770

According to many other threads in this forum the ATI Radeon HD 5770 graphics card is said to work fine with the Mac Pro 2008 (model no. 3,1) though the Apple Store lists the Mac Pro (Mid 2010) under system requirements. Well, before I’m going to upgrade my Mac against Apple’s will, I’m just curious to know if anyone has found out why Apple restricts the compatibility to Macs from mid 2010 on. Is there an issue that affects only a small number of machines? Or is there a software incompatibility popping up under rare circumstances? What is the reason for this? Why does Apple not grant downward compatibility?

Apple does marketing and doesn't do a bang-up job on writiing technical requirements on hardware upgrades and testing. It doesn't make sense, there is no reason for not just "works with 10.6.5 or later on ALL Mac Pro models."
something nice and clear and so avoids all the questions and discussion.
Radeon HD 5870 versus 5770
2008 has PCIe 2.0 so no lose of bandwidth.
And I guess you ignored the numerous comment section on the product page? where people said it works.
ATI Radeon HD 5770 MC742ZM A

Mac Pro 2008 or iMac 27 i7 ? Which to choose?

I am looking to upgrade to a faster Mac from my current Macbook Pro and decided either on an iMac 27 inch i7 2.8 GHz 8 Gigs RAM 4870 Video card or buy a used Mac Pro 2008 with 2 x 2.8GHz 4 Core (8 core total) with 10 Gigs RAM and an 8800GT video card.
Both come to almost the same price. Problem is I don't know which to get. The system will be used mainly for software development, running windows 7 and linux as Virtual Machine, some light gaming, and music (sampling, etc)
I love the iMac's LED screen and the i7 certainly is fast but love the Mac Pro's expandability in terms of hard drives and memory and I would use it on my 30 inch LCD. That said, would I ever go past the Mac Pro's configuration of 2 TB's of drives (maybe) and more than 10 Gigs RAM (don't know)? You're stuck with the iMac in terms of hard drives forced to add slow external cases.
The Mac Pro is over 2 years old at this point but I know the Mac Pro is a work horse and the iMac has had issues.
Anyone have an opinion on this? Might it be worth saving some more cash (although would take another 6 months) and getting a 2009 Mac Pro?
Let me know...

Asked a lot and the new iMac makes it look better, but not for triple boot unless you stict to VMs most of the time. The freedom of having alternate OSs on their own drives and such.
AppleInsider gave the high end iMac makes sense if you go that route, and if you would need a monitor as well?
Barefeats has posted a number of tests of the iMacs
http://www.barefeats.com
Even the 2009 $2149 4-core is no slouch and easier to find and work with.
At that price, you are close to the 2010. So wait another 36 hrs.
http://www.apple.com/macpro/specs.html
http://www.barefeats.com/nehal17.html
Apple Specials change during the day, they disappear quickly.
http://store.apple.com/us/browse/home/specialdeals/mac/mac_pro

Mac Pro 2008 won't boot from install disc - black screen

Hello,
I recently purchased a new hard drive to replace the original that came with my Mac Pro 2008. I was able to format the new drive using Disk Utility. I am now at the point where I need to install OS X onto the new drive, but the computer refuses to boot from the disc. The disc is recognized by the computer (I can access the disc and am able to use the BootCamp applications, etc.) but I just get a black screen when trying to boot directly from the disc. The computer boots fine otherwise.
I have tried the following:
I have tried using both the gray install disc that came with the computer and the Snow Leopard Install DVD disc.
I have tried booting using the "C" key and the "option" key but still receive a black screen following the chime (I've held these down for several minutes).
I have tried restarting from either install disc using the Bootcamp Assistant.
I have tried running the installation software to get it to restart from the disc.
I have tried a combination of the drives, i.e. trying to boot from the discs with just the new drive installed, just the original drive installed, and with both in bay1 and 2.
Everything results in the computer starting up, hearing the chime, and then nothing..just black screen. I have the original drive partitioned with BootCamp with OSX Snow Leopard and Windows 7 installed (I don't know that that matters).
I am at a loss as to what to try next. It doesn't seem like the superdrive because it is recognizing the disc, it just won't boot from it.
Any help is appreciated, thank you.

Clone should be a must and easy to do and learn (learn by doing! 2)
6800 would 'qualify' as 5x70 series flashed etc and same rule: 10.6.5
In the past there was 10.4.6, 10.5.6, but not 10.6.6 - even though strong need for such a DVD.
10.6.8 DVD would be excellent
Lion or ML - buy, download, make an installer flash card would be what I would do at this point.
Then keep both - dual boot as you learn and test and see what ML does and waht you had that required Rosetta to support PowerPC. See www.roaringapps.com about that.
With Carbon Coyp Cloner - was share, now commercial, great utility been around since 10.2.2 at least - this time 2003. 10 yrs.
You can clone the system folders, you can even selectively choose. You can skip copy of most of your home account and do that separately to another drive if you want.
Clone Windows with Paragon or WinClone and use Windows 7 or 8 DVD to do a system repair (automatic) or to edit the BCD file. It can and should - and all you do is boot Windows 7 DVD w/ only the one drive present and go at it. Piece of cake. But yes, Windows gets fussy if you change or remove or move. BCD to the rescue. A proper program for cloning like Paragon's "Clone OS" meant for going from disk drives to SSDs, knows that and how to do it.
Back to how to clone etc:
Clone
Disk utility has RESTORE which will also clone your system but not the Lion Recovery partition. Oddly Apple did not 'endorse' making bootable clone of the system which works too but most choose Carbon Copy Cloner - it works more consistently; it allows for smart update of the backup volume. Both can backup to a sparse disk image if desired.
Using Cloning as a Backup Strategy
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.bombich.com/software/updates/ccc-3.5.html
OS X Lion Install to Different Drive
How to create an OS X Lion installation disc MacFixIt
Migration Assistant Update for Mac OS X Snow Leopard
http://www.apple.com/support/lion/installrecovery/
Create an OS X Lion Install disc
http://reviews.cnet.com/8301-13727_7-20080989-263/how-to-create-an-os-x-lion-ins tallation-disc
How to clone your system:
http://macperformanceguide.com/Mac-HowToClone-backup.html
http://macperformanceguide.com/Mac-HowToClone.html
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.macperformanceguide.com/blog/2012/20120711_2-MacPro-internal-clone-ba ckup.html
The DVD is dependent on your hardware. And your hardware changed. The drivers for the 5780 and 6xxx are bundled in the OS and lacking. Minimum build thing.
Put the new drive anywhere you want. Does not matter. Can move it later. Can be drive bay 0-3 or a Firewire external or under the DVD drive.
When you clone pull the old drive and boot from the newly cloned.
After that keep a backup clone around all the time. Takes less than 10 minutes to do a smart update to copy just the changes to keep it current. So you have working copy of the system. I keep Clone "A" that I keep "as was" the system as of last month or whatever (like 10.7.4 before upgrade to 7.5).
Comes easier after doing it once and have all your ducks in a row.

Mac Pro 2008 Can't start Windows 7 / 8 Installer

I'm trying to load Windows 8 (And have previously tried everything with Windows 7) on my Mac Pro early 2008 with Mountain Lion, and cannot get the installers to initiate.
When I start the bootcamp assistant and reboot, my mac freezes before ever getting to the installer. When I reboot and hold option to manually select the installer, it freezes as soon as I select it. I've tried this from a DVD, USB, and even an install partition i setup on my HD, all with the same freezing results. This is a legitimate copy of Windows 8 system builder I'm working with and have installed it perfectly in Parallels.
I should note I upgraded my video card a long time ago to a gt 120, so I'm wondering if the video card might be the problem. I've installed Windows 7 with this video card in the past so I'm guessing this is a Mountain Lion/Bootcamp 5 issue.
Has anyone else with a Mac Pro 2008 succesfully installed Windows 7/8 from Mountain Lion/Bootcamp 5?
Any input would be immensely appreciated!

There are no Windows 8 Bootcamp drivers. Windows 8 is not supported.
Use Parallels or Fusion to install Windows 8. By doing so you eliminate the need for drivers since the virtual machine creates virtual hardware and drivers.
Once the Windows 8 Bootcamp drivers are developed and released you can then install using Bootcamp Assistant.
Read this forum. Some people are posting that they had some success with the Bootcamp install. but if you have to rely on your computer then don't take the chance.

Does MacBook Pro 13 inch (mid 2010 model) Support DP MST 1.2?

Does the MacBook's Pro 13 inch (mid 2010 model) mini Display Port output support the DisplayPort 1.2 Multi Stream protocol?
The graphics card on this model is the Nvidia GeForce 320M.
Thank you.

DsiplayPort and its variant Mini DisplayPort are interesting protocols because they use a packet interface to send mostly the changed data. There is no gratuitous repainting the screen with the same data (every 1/60 second or similar) as performed by almost every protocol that came before it.
This would free a lot of time on the interface for the information to support an additional display in the newly freed "dead time" when nothing has changed on the primary display. What would be needed at the computer end is a different address for the second and subsequent display(s). What would be needed at the Display-end is a display with a "daisy chain" output port (it cannot be the same as an input port because the signal drivers are set up to accept input, not drive output) to be able to pass the signal along to another display.
To the best of my knowledge, Apple has not yet taken advantage of this ability to address a second display, and at this writing these interfaces on Apple computers support only one Mini DisplayPort display.
There may be the ability to daisy-chain a second Thunderbolt display off the first Thunderbolt display in a chain, when working with a Mac's Thunderbolt connector.
But at this writing, any Mini DisplayPort device connected to that port is always the last device on the chain.

Replacing old HD with SSD and Hybrid HD Mac Pro 2008, 10.7.5

My old 1tb 7200 rpm drive has started doing some quirky things, so I decided to upgrade to a 240 Gb SSD for my OS and App's, and I would install the 2TB Hybrid drive to hold the home folder with movies, pics, music. So I formatted my 2TB disk in disk utilities.
I copied, by dragging and dropping my home folder from old drive to new 2TB, I went into system preferences, under User/Group created a new user at the administrator level, and set the new user to open at login.
When I restarted it was the old galaxy screen, the dock had moved back to the bottom and it was set up different.I also can open Iphoto or itunes and they are empty, "The folder “Pictures” can't be opened because you don’t have permission to see its contents", and the same goes for Itunes, I haven't tried FCPX or the Adobe Products I use.
"So, I think well I probably just need to set up my ssd with my OS and App's so the new disk can see my prefrences", so I format, use Carbon Copy Cloner, deselecting, under the User tab, my old User and the New user I had created for the new 2TB drive, because I have no room for it on the 240 GB drive. And, I deselected some apps I didn't want to come over. I cloned it, changed my start up disk in my preferences, and restarted.
I still get the same thing when I logged into my new 2TB Drive. I am planning on keeping my old drive for archive, and I also backed up to an external using Time Machine before I started messing with the new drives.
Please Help!
Mac Pro 2008
OSX 10.7.5

Mac OS X is inherently a Multi-User system designed to protect each User's data from all other Users. A new User does not have access to your existing files, including the desktop Preferences and the Dock Preferences
You need to do one of:
a) change all the permissions all around -OR-
b) make this change without creating a new User (e.g., by cloning your original User or by Installing a new version of Mac OS X and using Assistants to connect to the old User data. This guide can help:
Setting-up a new Mac from an old one, its backups, or a PC

So im about to buy a mac pro, I just need help cause im not sure if it's worth paying more for instance, a hi-res screen compared to the stock screen, and will i really miss the .2 ghz and the upgraded video card if I get the 2.0 ghz mbp?

So im about to buy a mac pro, I just need help cause im not sure if it's worth paying more for instance, a hi-res screen compared to the stock screen, and will i really miss the .2 ghz and the upgraded video card if I get the 2.0 ghz mbp?

The_Tiger92 wrote:
So im about to buy a mac pro, I just need help cause im not sure if it's worth paying more for instance, a hi-res screen compared to the stock screen, and will i really miss the .2 ghz and the upgraded video card if I get the 2.0 ghz mbp?
It appears the 15" 2.2 ghz isn't worth spending $400 more for, but you get the 1GB Radeon 6750M that has four times the VRAM than the 15" 2.0Ghz model and about 167% more performance. High settings on all current games with over 50 fps.
If your not into 3D gaming or just light weight, then the 2.0 Ghz (last years performance) will suffice on low-medium settings at about 30 fps.
The 13" is rather poor as it has integrated graphics. 30 fps on only some games.
The high res screen is a excellent choice and the anti-glare is great for viewing just about anywhere.
No messy films to replace at $30-$40 a pop.
A lot of people bring the glossy screens back once they hear about the anti-glare.
http://www.pcpro.co.uk/blogs/2011/05/23/glossy-vs-matte-screens-why-the-pc-indus trys-out-of-touch/
Here's my 17"
In my opinion the extra $400 for another 2-3 years of use out of the computer is worth it.
Quad cores are more than enough for most uses for most people for many years, it's just a slow card is going to make the machine feel slow in rendering graphics in the future.

Compatible HD for Early Mac Pro 2008

Hello All,
I have two failing drives in my early Mac Pro 2008 and its time to find some replacements. The drives I need to replace are 1TB in size but I was looking to get something larger being 1.5TB. I read on a site that this version of Mac Pro supports a maximum of 4TB accross all the four bays which would essentially mean a maximum of 1TB for each Bay. Here is the link to the site: http://www.everymac.com/systems/apple/mac_pro/faq/mac-pro-how-to-upgrade-hard-dr ives-what-type-supported.html
Question I have, is whether its safe to add two 1.5TB drives (I also have a 640GB for the boot and 500GB additional data drive) or should I stick with 1TB drives? Also, is there any advantage in going beyond the 3Gb/s Serial ATA spec as I would suspect the faster drives would not be utilized to their capacity given the older data path in this machine.
Any help/advice would be appreciated and thanks in advance!
Cheers,
Vin.

You can put any make and any size 3.5" drive in all the bays in any combination. Also SATA 3's will work but of course at not their full maximum speed as you mentioned so SATA 2's are OK.
As an example, if you got 4 3TB's you could stuff them in there for a max of 12TB. Bit of overkill unless you really need all that space!
Personally I like Western Digital 1TB and 2TB blacks.
You might also want to consider using an SSD as your boot drive.
Update: I took a look at that site you linked. That 4TB limit is the max any one drive bay can support, not the total capacity across all 4 bays.

Mac Pro 2008 always crash after sleep and after first start

Hello, new in the forum,
2 years ago, I replaced the main disk of a Mac Pro 2008 for a SSD Samsung 470 256 Go.
Until then, it always crashed 1 or 5 minutes after sleep mode (which I didn't used much), and not always 10 to 15 minutes after the first start of the day.
No matter if I was working on it or not… Suitcase installed or not (no font problem here). Rest of the day was fine (if no sleep !).
The difference of speed was so big and "good" that I dealed with it. I though that the Mac Pro was a little old for the SSD technology, and that Apple would fix it, with chance…
2 weeks ago, I installed Maverick :
I got crashs during the work flow too. I needed to re-start 3 times at least… Re-start without extension was ok (or not), re-start, crash, re-start without extension, restart ok. I used Onyx, did PRAM too. And sometimes, I needed to re-install Maverick or even to do a clean-install !
So I suspected the Samsung 470 for all (sleep and work crashs) and replaced it for a Samsung 840 Pro 512 Go.
And the Mac Pro returned to Mountain Lion.
Not really better : no crash one day (yeeeees!) and crash after the first start the next day (nooooo!). Every time I tested sleep mode, it crashed.
My system :
Mac Pro 3.1 - 2,8 GHz - Quad
Mountain Lion, 10 Go ram DDR2, ATI Radeon HD 2600 XT, 30' cinema display.
Adobe CS5 alone (minimal install) with Onyx to repair after each crash.
Could it be the video card, the mother board, the age of the boy ?
Thanks a lot !
Christophe S

Edit !
I said that Finder and apps were blocked after 10 seconds (without extension).
But it was to clic on Launchpad that blocked all, and 5 minutes later it works again.
I did clic again on Launchpad, it blocked and 2 minutes later it appeared full screen but with rainbow circle, and quit.
- Restarted with extensions. Kernel panic!
- Restarted the mac and the grey screen with Apple blocked, without any mouse this time. 15 minutes later, still blocked.
- Forced restart without extension. Here are the reports of Kernel Panic and EtreCheck:
Kernel Panic Report:
Interval Since Last Panic Report: 122463 sec
Panics Since Last Report:          1
Anonymous UUID:                    52E60929-F5AE-D9CD-04B0-1872526C0821
Mon Oct 13 10:58:17 2014
panic(cpu 3 caller 0xffffff8007cb8945): Kernel trap at 0xffffff8007ef69e0, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x000000000000008a, CR3: 0x000000002f749000, CR4: 0x0000000000000660
RAX: 0xffffff80209bb7e8, RBX: 0xffffff801fc6d808, RCX: 0x0000000009000000, RDX: 0xffffff801fc6dde0
RSP: 0xffffff8131b7bbc0, RBP: 0xffffff8131b7bc00, RSI: 0x00000000000c43ff, RDI: 0xffffff801fc6dde0
R8: 0x0000000000000000, R9: 0x0000000000000000, R10: 0xffffff80220fbfa4, R11: 0x0000000000000020
R12: 0xffffff801fc6dde0, R13: 0x00000000000c43ff, R14: 0x00000000000c43ff, R15: 0x0000000000000002
RFL: 0x0000000000010202, RIP: 0xffffff8007ef69e0, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x000000000000008a, Error code: 0x0000000000000000, Fault CPU: 0x3
Backtrace (CPU 3), Frame : Return Address
0xffffff8131b7b860 : 0xffffff8007c1d636
0xffffff8131b7b8d0 : 0xffffff8007cb8945
0xffffff8131b7baa0 : 0xffffff8007ccebfd
0xffffff8131b7bac0 : 0xffffff8007ef69e0
0xffffff8131b7bc00 : 0xffffff8007eee0d6
0xffffff8131b7be00 : 0xffffff8007d1a5d6
0xffffff8131b7be60 : 0xffffff8007d092aa
0xffffff8131b7bf50 : 0xffffff8007fe97ba
0xffffff8131b7bfb0 : 0xffffff8007ccf453
BSD process name corresponding to current thread: mdworker
Mac OS version:
12F45
Kernel version:
Darwin Kernel Version 12.5.0: Sun Sep 29 13:33:47 PDT 2013; root:xnu-2050.48.12~1/RELEASE_X86_64
Kernel UUID: EA38B02E-2B88-309F-BA68-1DE29F605DD8
Kernel slide:     0x0000000007a00000
Kernel text base: 0xffffff8007c00000
System model name: MacPro3,1 (Mac-F42C88C8)
System uptime in nanoseconds: 121192507210
last loaded kext at 8889944220: com.apple.driver.AudioAUUC 1.60 (addr 0xffffff7f899fe000, size 28672)
loaded kexts:
com.apple.driver.AudioAUUC 1.60
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleHDAHardwareConfigDriver 2.4.7fc4
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.iokit.IOBluetoothSerialManager 4.1.7f4
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleHDA 2.4.7fc4
com.apple.driver.AppleUpstreamUserClient 3.5.12
com.apple.driver.AppleMCCSControl 1.1.11
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.kext.AMDFramebuffer 8.1.6
com.apple.driver.AppleUSBDisplays 357
com.apple.iokit.CSRBluetoothHostControllerUSBTransport 4.1.7f4
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.ATIRadeonX2000 8.1.6
com.apple.driver.ApplePolicyControl 3.4.5
com.apple.driver.AppleSMBusPCI 1.0.11d1
com.apple.driver.AppleLPC 1.6.3
com.apple.driver.AppleMCEDriver 1.1.9
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.CSRHIDTransitionDriver 4.1.7f4
com.apple.driver.PioneerSuperDrive 3.3.1
com.apple.iokit.SCSITaskUserClient 3.5.6
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.3.5
com.apple.driver.AppleUSBHub 635.4.0
com.apple.driver.AppleIntel8254XEthernet 3.1.1b1
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.driver.AppleAHCIPort 2.6.6
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBEHCI 621.4.6
com.apple.driver.AppleUSBUHCI 621.4.0
com.apple.driver.AppleACPIButtons 1.8
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.8
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 214.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2.1
com.apple.driver.AppleIntelCPUPowerManagement 214.0.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.driver.DspFuncLib 2.4.7fc4
com.apple.iokit.IOAudioFamily 1.9.2fc7
com.apple.kext.OSvKernDSPLib 1.12
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.iokit.IOSurface 86.0.4
com.apple.iokit.IOBluetoothFamily 4.1.7f4
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.1.7f4
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleHDAController 2.4.7fc4
com.apple.iokit.IOHDAFamily 2.4.7fc4
com.apple.driver.AppleGraphicsControl 3.4.5
com.apple.iokit.IONDRVSupport 2.3.7
com.apple.kext.AMD2600Controller 8.1.6
com.apple.kext.AMDSupport 8.1.6
com.apple.iokit.IOGraphicsFamily 2.3.7
com.apple.driver.AppleSMC 3.1.5d4
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.4.1d13
com.apple.driver.AppleUSBHIDMouse 175.8
com.apple.driver.AppleHIDMouse 175.8
com.apple.driver.AppleUSBHIDKeyboard 170.2.4
com.apple.driver.AppleHIDKeyboard 170.2.4
com.apple.iokit.IOUSBHIDDriver 623.4.0
com.apple.driver.AppleUSBMergeNub 621.4.6
com.apple.driver.AppleUSBComposite 621.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.6
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOATAPIProtocolTransport 3.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.6
com.apple.iokit.IOUSBUserClient 630.4.4
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.5.1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOATAFamily 2.5.1
com.apple.iokit.IOUSBFamily 635.4.0
com.apple.driver.AppleEFINVRAM 2.0
com.apple.iokit.IOHIDFamily 1.8.1
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220.3
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 345
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.8
com.apple.iokit.IOPCIFamily 2.8
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: MacPro3,1, BootROM MP31.006C.B05, 8 processors, Quad-Core Intel Xeon, 2.8 GHz, 10 GB, SMC 1.25f4
Graphics: ATI Radeon HD 2600 XT, ATI Radeon HD 2600, PCIe, 256 MB
Memory Module: DIMM Riser B/DIMM 1, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x02FE, 0x47523244463247425838454C3830304E3252
Memory Module: DIMM Riser B/DIMM 2, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x02FE, 0x47523244463247425838454C3830304E3252
Memory Module: DIMM Riser A/DIMM 1, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser A/DIMM 2, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser A/DIMM 3, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x02FE, 0x47523244463247425838454C3830304E3252
Memory Module: DIMM Riser A/DIMM 4, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x02FE, 0x47523244463247425838454C3830304E3252
Bluetooth: Version 4.1.7f4 12974, 3 service, 12 devices, 0 incoming serial ports
PCI Card: ATI Radeon HD 2600, sppci_displaycontroller, Slot-1
Serial ATA Device: Samsung SSD 840 PRO Series, 512,11 GB
Serial ATA Device: ST31000524AS, 1 TB
Parallel ATA Device: PIONEER DVD-RW DVR-112D
USB Device: hub_device, apple_vendor_id, 0x9120, 0xfd500000 / 2
USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfd520000 / 4
USB Device: Apple Optical USB Mouse, apple_vendor_id, 0x0304, 0xfd521000 / 6
USB Device: Apple Keyboard, apple_vendor_id, 0x0221, 0xfd522000 / 5
USB Device: Apple Cinema HD Display, apple_vendor_id, 0x9220, 0xfd530000 / 3
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8206, 0x5d200000 / 2
FireWire Device: built-in_hub, 800mbit_speed
FireWire Device: unknown_device, unknown_speed
Report EtreCheck :
Description du problème :
Here is the report of EtreCheck after the Kerner Panic sent before.
Christophe.s
EtreCheck version : 2.0.2 (86)
Rapport créé 13 octobre 2014 11:23:31 UTC+02:00
Informations matérielles : ℹ️
Mac Pro (début 2008)
Mac Pro - modèle : MacPro3,1
2 2.8 GHz Quad-Core Intel Xeon CPU : 8-core
10 GB RAM Pas extensible
DIMM Riser B/DIMM 1
2 GB DDR2 FB-DIMM 800 MHz ok
DIMM Riser B/DIMM 2
2 GB DDR2 FB-DIMM 800 MHz ok
DIMM Riser A/DIMM 1
1 GB DDR2 FB-DIMM 800 MHz ok
DIMM Riser A/DIMM 2
1 GB DDR2 FB-DIMM 800 MHz ok
DIMM Riser B/DIMM 3
empty empty empty empty
DIMM Riser B/DIMM 4
empty empty empty empty
DIMM Riser A/DIMM 3
2 GB DDR2 FB-DIMM 800 MHz ok
DIMM Riser A/DIMM 4
2 GB DDR2 FB-DIMM 800 MHz ok
Bluetooth: Vieux - Handoff/Airdrop2 pas disponible
Informations vidéos : ℹ️
ATI Radeon HD 2600 - VRAM : 256 MB
Cinema HD Display 2560 x 1600
Logiciel du système : ℹ️
OS X 10.8.5 (12F45) - Uptime: un jour 0:11:6
Informations des disques : ℹ️
Samsung SSD 840 PRO Series disk0 : (512,11 GB)
Statut S.M.A.R.T. : Vérifié
disk0s1 (disk0s1) <non monté> : 210 Mo
MacPro SSD (disk0s2) / [Startup] : 511.25 Go (472.61 Go libre)
Recovery HD (disk0s3) <non monté> [Restauration] : 650 Mo
ST31000524AS disk1 : (1 TB)
Statut S.M.A.R.T. : Vérifié
disk1s1 (disk1s1) <non monté> : 210 Mo
MacPro 1To (disk1s2) /Volumes/MacPro 1To : 999.35 Go (633.08 Go libre)
Recovery HD (disk1s3) <non monté> [Restauration] : 650 Mo
Informations USB : ℹ️
Verbatim Portable USB Drive 320,07 GB
Statut S.M.A.R.T. : Vérifié
disk3s1 (disk3s1) <non monté> : 210 Mo
320 Go Christophe Syren (disk3s2) /Volumes/320 Go Christophe Syren : 319.73 Go (313.64 Go libre)
USB 2.0 USB Flash Drive 8,17 GB
Statut S.M.A.R.T. : Vérifié
SANS TITRE (disk2s1) <non monté> : 8.17 Go
Apple, Inc. Keyboard Hub
Mitsumi Electric Apple Optical USB Mouse
Apple, Inc Apple Keyboard
Apple Inc. Bluetooth USB Host Controller
Gatekeeper : ℹ️
Mac App Store et développeurs identifiés
Représentants de lancement : ℹ️
[désengagé] com.adobe.AAM.Updater-1.0.plist Aide
[désengagé] com.adobe.CS5ServiceManager.plist Aide
[désengagé] com.extensis.FMCore.plist Aide
Daemons de lancements : ℹ️
[invalid?] com.adobe.SwitchBoard.plist Aide
Représentants de lancement pour l’utilisateur : ℹ️
[désengagé] com.adobe.AAM.Updater-1.0.plist Aide
[désengagé] com.adobe.ARM.[...].plist Aide
Éléments Ouverture : ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox Application (/Applications/Dropbox.app)
Plug-ins internet : ℹ️
OfficeLiveBrowserPlugin : Version : 12.3.6 Aide
AdobePDFViewer : Version : 9.5.5 Aide
QuickTime Plugin : Version : 7.7.1
JavaAppletPlugin : Version : 14.9.0 - SDK 10.7 Vérifier la version
Panneaux de préférences de 3ème partie : ℹ️
Growl Aide
Time Machine : ℹ️
Skip System Files: NO
Sauvegarde automatique : OUI
Disques sauvegardés :
MacPro SSD : Taille de disque : 511.25 Go Disque utilisé : 38.64 Go
Destinations :
Data [Network]
Taille totale : 2 To
Nombre de sauvegardes total : 9
Sauvegardes la plus agée : 2014-10-08 01:39:21 +0000
Dernière sauvegarde : 2014-10-10 11:31:35 +0000
Taille de la disque de sauvegarde : Excellent
Taille de sauvegarde 2 To > (Taille de disque 511.25 Go X 3)
L’utilisation du CPU par processus : ℹ️
      1% WindowServer
      0% ps
      0% fontd
      0% System Events
      0% coreservicesd
L’utilisation de la mémoire par processus : ℹ️
97 Mo Dock
97 Mo Finder
75 Mo WindowServer
64 Mo com.apple.security.pboxd
64 Mo CalendarAgent
Informations de la mémoire virtuelle : ℹ️
523 Mo RAM Disponible
1.04 Go RAM Active
307 Mo RAM Inactive
8.86 Go RAM Résidente
266 Mo Pages entrants
0 o Sorties pages

Can i plug a uk mac pro 2008 in europe

Working in Spain with a Mac Pro 2008 bought in UK.
The plug is UK type.
Can I change the plug cable for an european one (2 PINs)
without risking the computer.

If it is a 2008 Mac Pro (desktop model), it should have a built-in power supply with a three-pin inlet (protective earth).
https://manuals.info.apple.com/en_US/Mac_Pro_Early_2008.pdf
According to the technical specifications, the line voltage is "100-120V AC or 200-240V AC (wide-range power supply input voltage)", whereas it says "100-240 V alternating current (AC)" in the manual above. To be on the safe side, it is never a bad idea to check whether the actual mains voltage in the country of use falls within a range mentioned on a label on the computer.
Mac Pro (Early 2008) - Technical Specifications
In countries using earthed wall sockets of the "Schuko" type, a complete molded cable (IEC cord) is typically used for the connection of computers. Such cables can be bought locally.
http://en.wikipedia.org/wiki/IEC_60320
http://en.wikipedia.org/wiki/AC_power_plugs_and_sockets
http://en.wikipedia.org/wiki/Schuko

Adding USB 2.0 ports to a Mac Pro 2008

Hi,
I love my Mac Pro 2008! Great machine, awesome performance, but I need more ports Who needs only three USB ports in the back, that's a joke!
Anyways, I just bought 2 StarTech 6-port USB 2.0 PCI cards from an online vendor, but quickly found out that it didn't fit my Mac. The description of the card even says it is compatible with Mac OS X. I suspect that Apple have changed the PCI slots for something else in the Mac Pro 2008. What are they and can we buy USB card that fit those slots? If so where? I am desperate for more ports.

You may have stumbled upon or checked some of the support pages?
http://www.apple.com/support/macpro/
- which has a link to an article titled "about your PCI Express slots"
http://docs.info.apple.com/article.html?artnum=304122
Specs 2008: http://support.apple.com/kb/SP11:
PCI Express expansion7
Three open full-length PCI Express expansion slots
One PCI Express 2.0 x16 slot
Two PCI Express x4 slots
And of course support for up to four PCI Express video cards; Fibre Channel; Mac Pro RAID.
You could install a powered USB hub, or FW/USB2, as long as you have free slots for more. I have FW800, a 1x Sonnet Tempo (couple storage drives), and a 4x Tempo (multiple RAID sets; Port Multiplier card and multi-drive enclosures and 4 channels).

I install LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it. But the popup keeps on coming with the old name.

I installed LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it with less than 7 karakters. But the popup keeps on coming with the old name.

I have a BT Infinity router plugged into the Time Capsule, not sure where the radio settings are?
They are able to use the network settings of the TC i.e. they can connect to the internet via the wifi through the TC but when they try and connect to the AirPort Disk this is where it is not allowing a connection.
I don;t have the drive shared out at all at the moment, is this necessary? How do I do this if so?
I have attached the screen shots of all the settings.
Thanks again for your help.

My Mac pro 2008, not running after the Apple logo, i rebooting and i rebooting

My Mac Pro 2008 no boot afther the Logo Apple, reboot, reboot and reboot only, and in XP, the graphic is pertubed with bad graphics ... the mémory it's good, and i thinks my card graphic is out. SRY for my english, it's not my language. Help my please, my apple care is finished 10/2011, and i will repared itself. Many thanks. Alain Muno

Not saying this IS your problem, but … I just went through avery similar problem with Mac Pro3,1. Here is my story.
On boot of any Mac OP system drive, internal or externalHDD, (Lion or Snow Leopard), original Mac Pro install CD, Snow Leopard CD,nothing. (Would only go to gray screen,apple logo, spinning gear that would stop spinning after about a minute.) But, it would boot on XP drive. However, in XP, on Windows black startupscreen, had alternating columns of two different patters of blue dots and XPgraphics were not as they should be (larger icons on desk top, slow response,different size of desk top (maybe 600x400 when it should have been1024x768). Supplied hardware test showedno failures. Took it to shop. Their better diagnostics showed nofailures. All peripherals (my drives, myCDs, etc, disconnected. (NOTE: they didnot try a new video card since they did not have one.) Still would not start even using their drives(external or internal). Shop tried a newlogic board. That did not work and theyput the original one back in. Shop saidall they could come up with was new processors. This was not a cost effective option and they had none to try.
After thinking about it more, I figured it could be thevideo card: the original 8800 GT that came with the Mac: that it was so bad itwould not start in Mac OS but would limp along in XP. I was all set to buy another vid card one-bay just to try. While doing thatresearch, came across several articles on the Internet that discussed vid cardfailure due to micro-cracks in some solder joints. These develop due to age/heat cycles. The proposed fix was to ‘reflow’ the solder. Figured it was worth a try before spendingthe money on a new vid card. Found thesedetailed instructions on youtube. http://www.youtube.com/watch?v=T7um_hZYom4 I followed the procedure, put the vid cardback in, and now it works just fine.
I did not and would not do this until I had ruled outeverything else. But, it has worked forothers and it did work for me.

Hi, i have a A1186 Mac Pro 2008 Tower. Im running windows 7 64Bit on it. Im not sure about what version of bootcamp should i use to get the drivers. Someone please help me.

Hi, i have a A1186 Mac Pro 2008 Tower. Im running windows 7 64Bit on it. Im not sure about what version of bootcamp should i use to get the drivers. Someone please help me.

Boot Camp support:
http://www.apple.com/support/bootcamp/
Boot Camp FAQ:
http://support.apple.com/kb/HT5639?viewlocale=en_US

Mac Pro 2008 - upgrade to 2010 model or not?

Similar Messages

Maybe you are looking for