Mac Pro doesn't recognize USB 3.0 PCI express card

Mac Pro doesn't recognize USB 3.0 PCI express card.  Does it need specific drivers? 

I did a little searching for that card.  The more I looked at it the more I felt that, yes, it needs a driver, and no, one doesn't exist for the Mac.  So it looks like that is a card only supported for PC's. But to be sure, if I were in your place at this point, I would contact MSI directly.

Similar Messages

  • Mac pro doesn't recognize admin password

    Mac pro doesn't recognize administrator password on login, I am using Yosemite and I was using erlier and didint let me log back in password was correct at all times tries to reset password with apple id and still not working. Try disk utilities with terminal and disk is not available, when I updated from maverick to yosemite I didin't set up a disc recovery.

    when I updated from maverick to yosemite I didin't set up a disc recovery.
    There is no need to do anything to set up Recovery. It should have been created and updated automatically on your Boot Drive when you upgraded to Yosemite.

  • Mac Pro doesn't recognize BluRay burner with Lion

    My Mac Pro would occasionally recognize my Blu-ray DVD burner, now with the Lion update, not at all.  My Apple Superdrive is recognized in Bay 1, but not the Blu-Ray in Bay 2.  Is there any way I can get my blu-ray burner to show up and be usable?  I have used Toast Titanium Pro to burn several BluRay discs before on this computer, but with Snow Leopard; even then, I would have to re-boot the Mac Pro in order to get it to remember it.

    Look back a couple months for a long thread on BR burners and support.
    Also, check and see what OWC sells and supports, and what 3rd party softare or from the vendor of course.
    Seemed like BR drive not being "present" after waking from sleep was one issue, or affecting sleep mode. Just like yours.
    I don't see that you include the make etc, you might consider that of interest.

  • Mac Pro won't recognize USB devices

    Hi all,
    My Mac Pro does not seem to recognize cameras (Canon Vixia and GoPro White) or card readers (USB 2.0).  When I restart the computer, it recognizes the Vixia, but automatically opens iTunes, where it's not intuittive how to copy just the folder to an external hard drive.  Why is this?  Is there a fix?  I tried running the firmware update, but received an alert that the update was not compatible with my machine. 
    I'm using a 3.7 GHZ Quad-Core Intel Xeon E5 with 16 GB RAM, running OS 10.9.3.
    arice77

    I had a similar problem that arose because Apple over-rode the original USB drivers with a kernal extension.
    UNloading the extension fixed my problems. Perhaps it will help you.
    In a terminal, type this:
    sudo kextunload -b com.apple.driver.AppleUSBFTDI
    If it solves your problem, keep in mind you'll have to do it after every reboot (a good use for command line history.)
    If it doesn't, you can put it right back with this:
    sudo kextload -b com.apple.driver.AppleUSBFTDI
    Hope that helps. I should also warn you that in my experience, 10.9.3's USB performance is terrible.
    --Ben

  • Mac pro doesn't recognize any thunderbolt?

    why my mac doesn't show any arrangement?

    your laptop needs to have thunderbolt. is your machine one of the ones below? if not, the display will not work on your machine.
    4. Which Macs have Thunderbolt Ports?
    The following models are Thunderbolt capable:
    MacBook Pro with Retina display (Mid 2012 and later)
    MacBook Pro (Early 2011 and later)
    MacBook Air (Mid 2011 and later)
    Mac mini (Mid 2011 and later)
    iMac (Mid 2011 and later)
    Mac Pro (Late 2013)
    To find out which model Mac you have follow these steps:
    In OS X Lion and later, choose About this Mac from the Apple () menu.
    Click More Info.
    Your model information should appear next to your computer's icon.

  • Mac Pro doesn't recognize any internal drive

    My Mac Pro (2008) -- after rebooting -- does not recognize any of the internal drives. I'm running 10.6.8 and all of a sudden after reboot, the machine hangs on grey screen and I get folder w/ question mark symbol. I boot from Snow Leopard install disk but no drive shows up as being able to reinstall on. Even opening up Disk Utility from Snow Leopard disc shows no internal drive.
    Any ideas?

    Just a few additional random thoughts on this Hardware:
    A SATA controller failure should take out all SATA drives. On the 2008 model, the Optical drives are IDE/ATA, but there are two additional SATA ports (data only) on the motherboard.
    In the 2008 and previous models, the Mac Pro RAID card uses a cable called iPass to intercept the essential signals to the four Hard Drive bays and route them through the RAID card. If that iPass cable were to come loose, the four main drive bays would stop working.

  • Can i install a usb 3.0 pci express card in a mac pro 2008

    Can I install a PCI express USB 3.0 card in my Mac Pro 2008?  Will it support the higher speed?

    No.

  • Mac Pro doesn't recognize Magic Mouse

    I have had a wireless mighty mouse without any problems but liked the idea of the magic mouse. The Mighty Mouse works fine and I've switched around the BT wires inside like many have talked about. However, when I try to setup the Magic Mouse, it isn't recognized at all. However, I can set it up without any problems with my Macbook Pro. Any thoughts?

    Good question. I have a PPC with a D-LInk bluetooth (DBT-120, Rev. C) and I can't get the Magic Mouse to pair with the Mac. I downloaded the latest version, and all I get is a blinking mouse light. D-Link companyt says their bluetooth was only developed for OS-X 10.4 (Tiger) and only worked with luck with OS-X 10.5 (Leopard). There are some problems with the bluetooth keyboard (won't send wakeup from sleep mode) but it hasn't had problems with the Mightly mouse.

  • Macbook Pro doesn't recognize Flip Mino camera in USB port after Yosemite upgrade

    Since I upgraded to Yosemite, my Macbook Pro doesn't recognize my Flip Mino camera in the USB port.

    I don't use FLIP, but if you get no other help here,
    consider the following ideas.
    If neither restarting your Mac
    nor reinstalling OS X fixes your
    problem, you might find some
    help if you search or post in the
    CISCO forum where Flip users post.
    Message was edited by: EZ Jim
    Mac OSX 10.10.1

  • Mac book pro don't recognize usb 3.0 devices after installing ntfs-3g

    I have installed OS X Mavericks after deleting everything in the hard drive (i.e. complete new installation). It should work fine, nevertheless the problem persist, in my case my mac book pro doesn't recognize a nexus 4 conected to the USB port, but before installing the ntfs-3g software the mac book recgnized that device. So I don't know how to resolve this problem because it hadn't solved even doing a completely new installation of the OS X Mavericks.

    I had a similar problem that arose because Apple over-rode the original USB drivers with a kernal extension.
    UNloading the extension fixed my problems. Perhaps it will help you.
    In a terminal, type this:
    sudo kextunload -b com.apple.driver.AppleUSBFTDI
    If it solves your problem, keep in mind you'll have to do it after every reboot (a good use for command line history.)
    If it doesn't, you can put it right back with this:
    sudo kextload -b com.apple.driver.AppleUSBFTDI
    Hope that helps. I should also warn you that in my experience, 10.9.3's USB performance is terrible.
    --Ben

  • Hi - my 2011 Mac Pro no longer recognizes devices in the usb ports, I've been told it's the logic board.  is there a way I can connect the iomega external hard drive to it through the firewire or thunderbolt ports?

    Hi - my 2011 Mac Pro no longer recognizes devices in the usb ports, I've been told it's the logic board.  is there a way I can connect the iomega external hard drive to it through the firewire or thunderbolt ports?

    jrburrows wrote:
    Ok, fair enough.  But since Job's death - Apple's control on leaks has been terrible.  I got the new iPhone, and I like it - but it hasn't made nearly as big as an impression as previous ones.  Because of the vast ammount of leaks.  With the iPad mini leaks, it's 99% sure to come out next week.
    Apple uses many manufacturers and it's massive also websites prefer to report on Apple whether true or false because it brings more hits.
    Amd by "others" I meant other people on iPads - not other devices/manufacturers.  It's possible to do so, I just want to know how.  I honestly don't think we'll ever be in a Post-PC era until all tablets allow us to use USB in the way computers do.
    No, USB is not the future, you missed the memo about cloud and wireless computing?

  • HT1338 my mac pro doesn't see my usb external hard drive what can i do?

    I'm having a problem with my mac pro not see my usb external hard drive. Can someone tell me something I can do to get the mac tosee the external drive?
    Thank you in advance.
    George

    Open Disk Utility (Applications > Utilities) and check the sidebar. If it's in it, select it and format it unless you have files

  • Macbook Pro doesn't recognize iPhone 4Gs

    Macbook Pro doesn't recognize my iPhone 4Gs
    My Macbook Pro 15 (Mac OS X 10.6.8) doesn't recognize my iPhone 4Gs (iOS5.1)
    Suddenly it stopped, last time was April 11 via Wi-Fi.
    Now even with the device plugged it can't be recognized.
    On iPhone Settings, the "iTunes Wi-Fi Sync" tab is grayed.
    Few days ago iPhone started to behave strangely, refusing to power off, sometimes not charging when plugged to USB port, sometimes does.
    Don't know what to do.
    Thanks in advance
    best

    What kind of phone is this? an iphone 4? or an iphone 4S? ( note there is no such phone as an iPhone 4gS)
    What you describe here is in my eyes the beginning signs of accidental damge, such as water damge of some sort.
    This is a great oppurtunity to see if the same issues you are having when connecting to your computer, replicate when conencted to another computer.
    You need to find out if there is a way to test with a new USB cord if possible to rule that out.
    Trying to isolate this to, or away from the iphone.

  • Macbook pro doesn't recognize camera on image capture

    My MacBook Pro doesn't recognize the built-in camera for a lot of my applications, including Image Capture. It doesn't show up anywhere in my system preferences. Any idea why this is so?

    (1)  Mac's built-in camera does not work with Image Capture.
    Image Capture works with external devices like scanners, some iOS devices, some cameras and RAM cards, etc.  Click this link for more info about Image capture and some of the apps that can work with your inbuilt camera.
    Click here for info about how to use Image Capture to transfer images from a connected external camera.
    For more info about Image Capture functions, see Image Capture > Help on your Mac or the Apple pages in this link.
    (2) To test for application-specific problems mentioned in the "How to Troubleshoot iSight " article, use apps like Photo Booth, QuickTime Player, iChat, FaceTime, or others intended to work with your Mac's inbuilt camera.
    (3) To test for user-specific problems mentioned in http://support.apple.com/kb/HT2090 the "How to Troubleshoot iSight " article, you must have more than one user account.  Do NOT use the "Guest" account.  Click this link if you need help creating new accounts for testing.
    Message was edited by: EZ Jim

  • Acrobat x pro doesn't recognize epson scanner

    Acrobat x pro doesn't recognize my epson perfection 1670 scanner. Other applications recognize this scanner. What can I do?
    All software and drivers are updated.
    Acrobat x pro ver10.1.4
    Mac os x 10.8.1, mountian lion

    Twain Sane can be downloaded HERE.  Others have recommended it as well and it is a viable option if your scanner is no longer supported under Mountain Lion.
    It is a bit of work to install and configure, but the developer says a preference pane is available and makes it a bit easier. Check out the site for instructions on how to install and configure it.

Maybe you are looking for

  • How can I share a Keynote show with a large audience using Outlook email?

    I am working with a corporate client with a global employee audience of 7,000. They use Outlook as their email platform. Can I create an animated Keynote show and embed it into an Outlook email? So that the user opens the email note, and is either im

  • How to remove time machine backup from a mackbook pro used in target disk mode

    Many months ago I (as my backup drive failed) I used my macbook pro in target disk mode to store the time machine backup of my iMac.  How do I delete the backup on the macbook pro?  I am running mountain lion on both machines.  When I boot the macboo

  • How to create a bordeless and titleless dialog or frame?

    Hi people, I am trying to do a simple start up screen for my application. I have done the graphics for the startup screen and save as filename.gif. I am looking for a container or a way to paint my the gif so that it looks like a startup screen. I ha

  • Having problem with insertchildAfter

    Hi  guys              i am working  with xml and want to appending a node after a particular node.i m using insertchildAfter function.but can not able to append that node using that. here is the structure of my xml:- <root>         <data>            

  • Password sync even with AD FS?

    If we implemented AD FS for use with Intune/SCCM and DirSync, does password sync also need to be enabled? As I understand DirSync is required for Intune when SCCM is used, even if AD FS is implemented, but what about Password sync?