Mac Pro included RAID Card?

Does the latest Mac Pro included hardware RAID card or software RAID if multi drive installed? Or it doesn't have RAID function?
Thank you

http://macperformanceguide.com/HardwareRAID-Main.html
http://macperformanceguide.com/Backup-mirror-vs-separate.html
http://en.wikipedia.org/wiki/RAID
http://www.acnc.com/raid
Dual backups and just use Apple Disk Utility or SoftRAID for stripe arrays.
Otherwise RAID6 and then you get into $money$ and fine when you have 8TB or more.
But with 2x4TB drives in an array and cloned and backed up (hourly, daily, weekly backup sets) you can be fine.
Most people never seem to consider 3-drive mirror, then you maintain two if onne fails BUT with any array you still need backups and spares and often need to buy 'extra' drives to insure you use the same models.
Besides which it is something that is hard to just jump into w/o some background and experience and then as you grow into how and what works.
And no, RAID5 is not concatenated and can only be done with hardware RAID controllers (and not suited for today's TB drives the way it once was).
http://www.macgurus.com is where I go immersed into storage arrays 12-ish yrs ago on personal level.

Similar Messages

  • Mac PRo with raid card shipped with drive not suitable for raid?

    Hi all,
    I ordered a Mac Pro with raid card and a 1TB hard drive. The drive which came in the computer was WDC WD1001FALS which is not a hard drive rated for raid usage. On Western Digital's site they suggest using WD1002FBYS.
    Is the model WD1001FALS the correct drive which Apple ships although one ordered the raid card?

    The WD 640GB Blue, and WD 1TB Black are the only drive options for the mac pro; that's what you choose.
    The RE3 (or FBYS) is not an option sold through apple. Buying the raid card, is not going to change the drive.
    On whether to use the RE3 over the Blacks, it depends on how you will be using it. From what I've heard, the Blacks are enterprise drives themselves; basically with just a less robust firmware (no TLER). If you will have the drives on 24/7 in a raid 5, then yes, RE3 will probably be better. If not, I think the black will suffice; note the blacks are GREAT drives by themselves anyway.
    The apple raid card can connect to both SATA and SAS drives internally, however most times people buying the raid card want to use it for SAS drives. There are a lot more cheaper and possibly a lot more stable options then apple's raid card if you are looking to use SATA drives.
    Check amug:
    http://www.amug.org/
    A common problem with the apple raid card is the battery:
    http://store.apple.com/us/product/MA849Z/B?mco=NDc1ODczNw
    Lastly about enterprise drives, truthfully I don't see the difference really. I have enterprise drives in a 8-drive raid5 config running 24/7 as a server. 2 drives died on me after about 4 months. To top it off, they died within 10 min of each other, crushing the raid to pieces. Granted they were Seagate ES.2's, it's understandable
    The boot drive of the server is a stock desktop WD drive and running 24/7. It's been running for almost 4 years straight.

  • Mac Pro (2009) RAID Card - Can't create RAID Set

    Hi Everyone,
    I have a Mac Pro 4,1 (Model 2009) running Mavericks 10.9.2. with the Apple RAID Card installed. I got 4 new SAS Drives (Dell Toshiba MK2001TRKB) which I'm trying to configure into a single RAID5 set.
    OS X detects the individual drives and with Disk Utility I can partition and/or format the individual drives. However when I try to create a RAID5 set using RAID Utility, the card won't create the RAID set. Ik keeps on showing the white-blue stripped progress bar. Tried creating a RAID0 or RAID1 with just 2 drives, but the card just doesn't create a RAID set.
    Anyone got a clue why this isn't working?
    Thanks,
    Sander

    Manualy erased all 4 the drives and it worked instantly. System is now initializing the volume :-)
    Still a bit strange. All 4 the drivers where brand new. I did some further testing and if I select the partion tab and just create a new partition on each drive, it still doesn't work. I have to select the erase option in Disk Utility and just do a simple erase on each drive in order to be able to create the RAIDset.
    Anyway, Thanks for the advise; performance even during initializing is pretty fast. I'm curious to see what kind of performance I get aftet the initialization is completed.

  • Has anyone experience Mac Pro Server RAID card failure?

    RAID card of our company's Mac Pro server broke twice in less than 12 months, resulting in our server being out of office for more than 11 weeks for repair. I really would like to know if we are just unlucky or if this kind of hardware failure happened also to other people?
    Thanks for your help.

    Hi
    I know it's no consolation to you but judging from my experience I think you've been unlucky.
    I've installed Apple RAID Cards in numerous XServes and MacPros at many sites and apart from the rare battery failure they've all gone OK and are still working as intended AFAIK.
    HTH?
    Tony

  • Mac Pro 2009 RAID Card Prevents Sleep

    Not a problem ... just an observation. After adding the Mac Pro Raid Card my 2009 Mac Pro won't sleep. Actually, it 'dozes' ... all programs stop and the displays go dark, but the computer fans keep slowly turning as the computer maintains power to the RAID card to keep the battery charged. Waking from 'doze' is faster than from sleep and energy consumption is minimal, but not zero ... maintaining the RAID card write cache and turning the fans takes some energy, but it seems that the hard drives are parked.
    So, unless I plan to be on vacation, in which case I will do a shutdown, which will force the RAID Card battery to discharge, my computer is either awake or 'dozing'. Does anyone see a problem with that?

    I think it was designed that way...
    http://support.apple.com/kb/HT1346
    on the FAQ, the last question addresses the sleep mode. The problem with RAID 5 is that you have the gap problem and that is why the battery (should/is) there. If you lose any of the info on the cache, then you will have to re-build the strips....
    (that is why I wanted ZFS as that problem is gone.. with RAIDZ)
    It means more power consumption...

  • Does radeon 5870 + Mac Pro 2008 + Raid Card = Work?

    Confusing subject, I know. My question is, I have a 2008 Mac Pro with the Apple Raid card installed, running 10.6 - I wanted to know, will the Radeon 5870 video card work in this computer, considering that one of my power connectors is already powering the Raid Card? I think this video card needs two power cables and I think my computer only has two (one of which is being used on the Raid Card).
    Can someone with this configuration confirm whether this card works or does not?

    Good question, never thought about that, but there is an FAQ on RAID card, and there is likely a Tech Note as well.
    http://www.apple.com/support/macpro
    I scan the daily changes to tech articles:
    http://support.apple.com/kb/index?page=articles
    I assume you don't want to use a y-split and pull power through one 6-pin, even though you may not be overloading or running GPU to the point where it and RAID card would be an issue.
    And avoid having to use a small 450W PSU in optical bay.

  • PANIC! - Mac Pro 2008 RAID Card Vanished!

    Hi all
    Right I seem to have a major issue so hoping someone can help.
    This morning I was using my MP there was a click the screen went blank and then the MP tried to reboot. The white light came on but the screens did not. I turn off the unit and all connected devices at the mains, waited a few mins and tried to re boot. The screen when blue but nothing loaded. I then got my old SL disk and booted from that. It booted and looking at disk utility there are no drives. Even worse I booted RAID utility and it tells me there is no RAID card!
    Now in essence I have got no further due to having to leave for work but I thought I'd ask for advice / ideas before I got back to the machine tonight.
    I will obviously try reseating the unit (with and without drives) but does it sound like the card is knackered!
    If this turns out to be the case is there a way I will be able to (some how) access data off the three drives that were in a RAID 5 config. or is the data lost?
    I do have a spare new battery for the card so would it be worth trying this as well?
    Any pointers you could give would be appreciated.
    Actually while were on the subject. If the card is dead then what card if any would you recommend to replace it with. (Not that I can currently afford to do this!). A actual Apple 2008 RAID card will be like Rocking Horse S**t to get hold of. It would need to be bootable and preferably do internal and external (but just internal would be fine)
    Thanks
    Steve

    Ok this has got a bit strange
    Once the init task had ran everything went green. So I then ran the Verify RAID set. again after a few days to verifying everything when green again. At this point the machine has not been powered down since 02/05/2012 @ 16.35
    Sunday, 6 May 2012 02:06:34 British Summer Time
    Background task completed: Task=RedundancyScrub,Scope=DRVGRP,Group=RS1
    informational
    Thursday, 3 May 2012 18:57:43 British Summer Time
    Background task started: Task=RedundancyScrub,Scope=DRVGRP,Group=RS1
    informational
    Thursday, 3 May 2012 18:57:44 British Summer Time
    Redundancy verification started on RAID set “RS1”
    informational
    Thursday, 3 May 2012 05:13:54 British Summer Time
    Background task completed: Task=Init,Scope=DRVGRP,Group=RS1
    informational
    Wednesday, 2 May 2012 16:35:29 British Summer Time
    Background task started: Task=Init,Scope=DRVGRP,Group=RS1
    informational
    Wednesday, 2 May 2012 07:18:37 British Summer Time
    Controller detected disorderly shutdown without battery backup
    critical
    So I shut the machine down. All ok.
    Now I have booted the mac up and I get the following:
    Sunday, 6 May 2012 13:43:33 British Summer Time
    Background task started: Task=Init,Scope=DRVGRP,Group=RS1
    informational
    Thursday, 3 May 2012 16:15:12 British Summer Time
    Controller detected disorderly shutdown without battery backup
    critical
    Sunday, 6 May 2012 02:06:34 British Summer Time
    Background task completed: Task=RedundancyScrub,Scope=DRVGRP,Group=RS1
    informational
    Thursday, 3 May 2012 18:57:43 British Summer Time
    Background task started: Task=RedundancyScrub,Scope=DRVGRP,Group=RS1
    informational
    Thursday, 3 May 2012 18:57:44 British Summer Time
    Redundancy verification started on RAID set “RS1”
    informational
    Thursday, 3 May 2012 05:13:54 British Summer Time
    Background task completed: Task=Init,Scope=DRVGRP,Group=RS1
    informational
    Wednesday, 2 May 2012 16:35:29 British Summer Time
    Background task started: Task=Init,Scope=DRVGRP,Group=RS1
    informational
    Wednesday, 2 May 2012 07:18:37 British Summer Time
    Controller detected disorderly shutdown without battery backup
    critical
    As you can see it has added a 3 May - Critical after the 6th when everything was ok and it started a init run again!
    The battery states it's charge
    Any suggestions?
    Do you think it will make a difference if I get a new battery for the RAID card? as I suppose it is 4 years old!
    Cheers Steve

  • HD and Mac Pro - Optimal RAID configuration?

    I'm fairly new to RAID, but have done a fair amount of reading over the past few weeks. I currently only have 1 external drive setup as mirrored RAID (1.5TB).
    I do a lot of HD video work (as well as a lot of PShop/Illustrator/AE) and just ordered a new Mac Pro (to arrive in a few weeks). I'm curious to know what you may suggest configuring my system like with the following components. I don't want to have to buy anything else right now, nor do I think that I'll have to.
    I've got:
    1. New Mac Pro with RAID card and 4 identical SAS 300GB internal drives (no, didn't order those all from Apple)
    2. An external 1.5 TB WD drive
    3. Two external 500GB WD drives
    Of course, I want the best of both worlds of speed and redundancy. I had been considering RAID 5, but the more I thought about it, I thought maybe RAID 0 was the way on some of the drives, then create another array making use of the externals and/or Time Machine to take care of the redundancy. I have this super machine coming, and just want to be sure I'm making most efficient use of it all. Any opinions on how you'd set this up, very welcomed.
    I typically work on short projects, I'm not a filmmaker. Client work is usually between 2-15 minutes per clip, and once its done, it can be archived. I've got a ton of old data and large photo library and all the space needs you may imagine with HD video and photography, but I'll certainly have room to spare and play with. How would you work with these 7 drives?

    There is a significant difference between 'running incompatible' software and using a version that has some vestigial system checks. The software is quite capable of running as it should. The issue I experienced has nothing to do with the factors that make it not supported (which is significantly different than incompatible). While your statement is true, its not properly applied. Fact is, FCP HD is NOT incompatible with the Mac Pro.
    The quick fix of ignoring the scratch location did the job. Taking that option vs spending money has nothing to do with wisdom, rather discernment. It runs just fine now, cost me nothing to get it running, and isn't something I have a huge need for anyway. So this somewhat pretentious attitude isn't needed.

  • Mac Pro with 8800 Card Availability

    On Jan 21 ETA for Mac Pro with 8800 card was 2-3 weeks. Now, on Feb 2, ( 12 days later ) ETA is still 2-3 weeks.
    Anybody heard anything more definitive?

    Why not just go out and buy the "stock" Mac Pro with the default ATI 2600XT card right now, and then just order the Nvidia 8800GT separately. Then when your 8800GT card finally arrives, sell the ATI card for $100 or so on eBay. All you will end up paying is about $70.00 more than the BTO option ($375 (including tax) for the 8800GT as a standalone option, minus $100 for selling the ATI 2600XT=$275 out of pocket cost vs. the $200 BTO option).
    That way you can have your Mac Pro right away (as I have for the last 3 weeks), and still get my 8800GT at or around the same time as yours for only a $75.00 difference.
    Having my new Mac Pro NOW is worth far more than saving $75.00. Time is $$$$$
    My standalone Nvidia 8800GT is scheduled to arrive Feb 28th (according to Apple). I already have a buyer with the 1st. generation Mac Pro that will buy my ATI 2600XT when the 8800GT arrives.
    Also, you might even have further delays with the BTO option if Nvidia has supply problems that could drag on into early to mid march if you hang with your current order.

  • How do I force a Mac Pro Lion RAID 5 rebuild after replacing a failed drive?

    Hi,
    My Mac Pro RAID 5 (with Apple RAID controller card and RAID 5 volume with 3 hard disks) showed degraded RAID set message due to failed drive.  After I repalced the failed drive, I was unable to add it back to the RAID set.  So I tried to removed or deleted this RAID set so that I can rebuild the RAID set from scratch.  No matter what I did, I was unable to delete the RAID set using the RAID Utility.  Can anyone help?  Thanks.

    I have been posting in this forum several times yet I was not getting any help nor comment on my issue from anyone (except Grant above.  Thanks and appreciate your support).
    So I have to help myself by searching various ways to resolve the issue.  I accidentally came across below findings and it solved my problem.  So I thought I will post it here just to share with whoever may run into the same problem.
    When I was trying to try to change to another harddisk, I noticed that I made a mistake in mixing up the drives when I put them back.  That is for the last two drive bays(3 & 4), for some reason I put the disks backwards.  That is drive 3 in Bay 4 and drive 4 in Bay 3.  I did not realize that on the drive mount Apple actually labelled them as 1, 2, 3, and 4 respectively for Bay 1 through Bay 4.
    With the two disks installed in the wrong sequence and even though one of them is a replacement disk, Apple RAID controller card still boot up the RAID set but showing degraded RAID sets and everthing is normal except it would not allow you to make the replacement disk as a global spare.
    After I put the disks in the correct order, I was able to use RAID utility to make the repalcement disk as a spare and the system starting rebudiling the RAID set automatically (thought it took three days to complete).
    Now my system is back to normal working.  So the solution is to insure the disks are installed back to the Mac Pro in the same order (sequence including the replacement disk) when the RAID was set up.  This is such a basic matter and I don't know how I missed it.  Hopefully sharing this experience will help someone who may have similar problem.  At lease this is the first thing to check before going any further.

  • Mac Pro + XServer RAID + FCP2 + Configuration

    Hello all. This is my first post here.
    I will soon buy a MacPro por video editing on Final Cut Pro 2 and I was wondering if you could help sort out if the configuration I've chosen is the best.
    I'll show you the configurations I thought first:
    *Mac Pro*
    - Two 3.0GHz Quad-Core Intel Xeon
    - 4GB (4 x 1GB)
    - Mac Pro RAID Card
    - 2 x 500gb HDD
    - ATI Radeon X1900 XT
    - 20" Apple Cinema Display + 23" Apple Cinema HD Display
    - Dual-channel 4Gb Fibre Channel PCIe
    *XServer RAID*
    - 2000GB ADM (4x500GB Ultra ATA)
    - Cache Battery Back-up Modules
    - Dual-channel 4Gb Fibre Channel PCIe
    My idea:
    A) The MAC Pro I'll be used for 3D rendering and video editing. I'll configure the 2x500GB with RAID1 (mirroring) for a fail safe env, leaving my with 500GB of available space
    B) XServer RAID will be connected directly to the Mac Pro (for now) via the fiber optic cards and we'll provided additional storage.
    C) For projects stored on the XServer RAID (videos for example) I must be able to access and edit directly with FCP2 without having to pass it to the Mac Pro
    D) I was thinking of using RAID5 for XServer RAID configuration leaving me with 2.64 x 500GB (as described on support faqs) = 1.3 TB of disk space with a reasonable fail safe environment (RAID5 with 3 drives allows one drive to fail and offers a good recovery rate).
    OK. My questions:
    1) Is my MacPro config enough for FCP2 + 3D Rendering ?
    2) Can I use the XServer RAID directly with Mac Pro or do I need aditional software / hardware?
    3) Can I connect the fiber optic from one board to the other without using the router? (on google the answers I found were very vague...)
    4) Is the RAID5 the best choice (in terms of performance vs data recovery) for video editing. The RAID5 specs states that random writes to disk are slower that other RAID configs. Is RAID 50 (5+0) a better choice?
    5) I opted for the 4 HDD config on XServer but I could change to a 7 HDD config for a similar total space.
    I'm sorry for the long post, but I can't find anywhere suitable information about this questions.
    Hope to hear from you.
    Thanks in advance!

    We have a ton of Xserve's and Xserve RAID's at my work. As of right now they're all directly connected to our servers with Fibre Channel cables (NOT fiber optic, totally different animal.) We finally just bought our first Fibre Channel switch to hookup five 10.5TB RAIDS and a huge tape loader for backups. The RAID's work perfectly when directly connected and are very fast. The only reason that you would need a Fibre Channel switch is if you want multiple machines to be able to access the array without using network shares.
    I really don't think that just four drives will give you the performance that you're looking for. In order to get good performance out of a RAID5 you NEED as many spindles as you can get. If you're stuck to a budget if would probably go to smaller drives but get more of them. I think you've already discovered this but if you want to do a RAID5+0, you'll need to populate drives on both sides of the RAID as they are physically seperated.
    As far as I know, you can only get Xserve RAID Drive Modules from Apple as they do some pretty intensive testing on every drive before they ship. You can't even buy empty modules, you can buy blanks but they don't include the required electronics.

  • Mac Pro 2009 Raid Set Lost after Hard Reboot

    We have a newer Nehalem based Mac Pro with a 2009 Black Apple Hardware Raid card.  The Hard Drive Configuration is: 4 x 2TB Western Digital drives setup as a Raid 1+0 array providing 4TB of space with what we believed to be optimal performance and redundancy.  We had two volumes / partitions configured on the array, one 120GB for the OS and the remaining 3.8TB for data. 
    Everything was working fine when the server froze up.  ON the Screen an error message said there is a problem with your Raid controller, Please open Apple Raid Utility.. Unfortunatly when we tried to do that we just got a spining beachball. We tried to open finder and it beachballed.  We tried to force quit and nothing working. Finally we were left with no choice but to do a hard restart of the server and turn the machine off and then back on. 
    When the server came back on it would not boot up.  We were greeting with the Folder with a Queston Mark.  We booted from the Mac 10.6 Snow leopard Server Disk and opened up Apples Raid utility software.  Much to our shock the Raid Set and the two Volumes were not shown in the Utility.  However all 4 of the drives were listed and all being shown as Green light good status, but listed as "Roaming".  We weren't sure what to do, the volumes weren't accesible since they didn't exist, the Raid set wasn't there, there was no way to run something like Data Rescue Recovery software.  We tried calling Apple and have to wait until they open this morning.  After looking online at various forums we came accross this problem with no solutions.  Most of the people with the problems had the older 2006 Blue Raid card, and this appeared to be a common issue amoung others with the older card.  I decided to try and re-create the Raid 1+0 set.  However as soon as I did that I was prompted by Raid Utility that the drives I was selecting to use for the Raid set were already a part of another raid set and using them would delete the data on the set.  I obviously canceled the process. Crazy enough the system knows the drives belong to a Raid set but doesn't realize it should know what the raid set information is.
    We were using Mac OS 10.6.7 Snow Leopard Server, and I even tried installing and updating an external drive with 10.6.7 Server and booted from the drive from the machine and try to run Raid Utility.  That did not work either.  Any advice from anyone would be awesome.  I'm worried what Apple is going to say when I do get a hold of them, the system is under Apple Care warranty.  Thanks in advance for anyone's time.

    I haven't lost data, but in my 2010 Mac Pro with 2009-vintage Apple RAID card, it has this Really Annoying Habit of constantly losing Disk 3 (the spare) in my 4x2 TB internal RAID5 array whenever I have to do a hard reboot.
    I keep having to re-mark the now-"Roaming" drive as a Spare and then wait 8+ hours for it to rebuild the array ... grrr.
    I saw an Apple KB article that suggests removing the Roaming disk and re-inserting it.  Duh.  Fat lot of good that did.  Really wish there was some answer to this issue ... hard reboots should NOT cause array disks to go from "Assigned"/good to "Roaming"! 

  • Adding ssd to mac pro with raid hdd

    Hi,
    In upgrading my 2008 mac pro (currently with hdds in raid) i'd like to add in an SSD with a clean install of yosemite and reformat the raid hdds for storage. What's the best method to accomplish this? I'll have to start over with the raid configuration i'm assuming because I need to give up a place for the SSD.
    Thanks,
    micaborn

    Mac Pro 2006, 2007 and 2008 models have two SATA data connectors on the motherboard, hidden in plain sight. They can be accessed by using a cable kit such as this one:
    http://eshop.macsales.com/item/NewerTech/MPQXES2/
    You can install the SSD in the second Optical bay. It has no moving parts, and does not run especially hot.
    There are MUCH faster ways to run a High-end SSD, by installing it on a PCI slot adapter card, but you should try installing a 2.5" SSD drive as a first step. You may need to re-organize where you store things, like in this article:
    User Tip: Creating a lean, fast Boot Drive

  • Mac Pro ATI 2600 card comparison -- with and without issues

    Starting this new post to help keep the info organized. This is in relation to threads such as
    [Mac Pro ATI 2600 Freezing Issue|http://discussions.apple.com/thread.jspa?threadID=1365277&tstart=0] (looks like this got locked on Mar-1?...)
    [Weird Mac Pro screen issue|http://forums.macrumors.com/showthread.php?t=419100]
    [Dual Quad-core Mac Pro reboots from sleep|http://discussions.apple.com/thread.jspa?threadID=1353551&tstart=0]
    [Reboot After Waking|http://forums.macrumors.com/showthread.php?t=432869]
    [2008 Mac Pro Owner Feedback|http://www.xlr8yourmac.com/systems/2008mac_proreports.html#storytop]
    This [post|http://discussions.apple.com/message.jspa?messageID=6724880#6724880] mentions the possibility that the ATI 2600 cards are manufactured on two separate lines, and that problem cards may be associated with just one of them.
    Thought it might be helpful to start posting specific card info and see if a pattern emerges.
    There are 3 main places on the bottom side of the ATI card where potentially relevant information is written. There is also info in System Profiler. Please include what you can but at least Part Number, Serial Number (mask the last few digits), and a brief summary of the problem symptoms you are seeing -- or that your system runs trouble-free. Feel free to copy/paste my text as a template.
    Please continue placing general comments in the threads listed above, and help keep this one focused on the card info. Thanks.
    ====================
    ATI Radeon HD 2600
    -Green Sticker-
    PN = 102B3610100
    SN = 640752001xxx
    RV630 256MB
    China
    -White Sticker-
    ATI-102-B36101-00(B)
    2005
    D33A27
    N136
    -Bar Code on opposite edge from ports-
    J5751094FYPVA 630T0021(630-8924) CN RV630
    -System Profiler-
    Vendor: ATI (0x1002)
    Device ID: 0x9588
    Revision ID: 0x0000
    ROM Revision: 113-B1480A-236
    EFI Driver Version: 01.00.236
    -Mac Pro Config-
    Stock 2 x 4 core 2.8GHz, 2 x 1GB RAM, 320GB HD
    Added 4 x 2GB OWC RAM, 1 x 320GB Seagate HD
    Apple Cinema Display 20"
    -Symptoms-
    Started using January 16, 2008
    First problem February 9, 2008 (24 days)
    Graphics become corrupted, recovers gracefully = yes
    Graphics become corrupted, requires hard shutdown = yes
    Reboots on wake = unknown (sleep not used)
    ====================
    Hoping something becomes apparent -sailhome

    Good idea; here's my data (Reboots from wake, no graphics issues (touch wood):
    ====================
    ATI Radeon HD 2600
    -Green Sticker-
    PN = 102B3610100
    SN = 6407520069xx
    RV630 256MB
    Made In China
    -White Sticker-
    ATI102B3610100(B)
    2005
    D33A27
    N136
    -Bar Code on opposite edge from ports-
    J5751094FYPVA 630T0021(630-8924) CN RV630
    -System Profiler-
    Vendor: ATI (0x1002)
    Device ID: 0x9588
    Revision ID: 0x0000
    ROM Revision: 113-B1480A-236
    EFI Driver Version: 01.00.236
    -Mac Pro Config-
    Stock 2 x 4 core 2.8GHz, 2 x 1GB RAM, 320GB HD (Seagate)
    Added 2 x 2GB OWC RAM, 2 x 500GB WD HD, 1 x 750GB WD HD
    Apple Cinema Display 30"
    -Symptoms-
    Started using January 18, 2008
    First problem (Unknown, within a few days of initial use)
    Graphics become corrupted, recovers gracefully = No
    Graphics become corrupted, requires hard shutdown = No
    Reboots on wake = Yes
    ====================

  • Bought a mac pro without airport card.

    Can find no information as to what I need or how to install it. I have an airport extreme card but it is apparently not compatible with the mac pro.

    Hi, I have the same problem like sarah1941. My 2nd problem is that I moved from New York to Calgary AB (Canada) 2 weeks ago and I've been trying to find anywhere in Canada the new airport card along with the new bluetooth card for my Mac Pro. The result was... not even the Apple stores (in Calgary) can help me with where I can get the new airport card. Apple.com doesn't sell it and it's getting frustrating looking for a $35 bucks value card world wide. If you have any infos about where I can get this card, please send me a link. I'd appreciate it a lot. Thanks and A Happy New 2008!

Maybe you are looking for