MAC PRO Internal USB ports stopped working

Hello, I have a mac pro 8 core with an USB internal ports problem, the 2 in front are not working anymore, and from the 3 in the back only the middle one is working.
I tried to pull all the power out for a whole night, resetting the pram and nvram but nothing helps.
When for example I put in a keyboard in one of the ports that is not working and when I power up the machine and I press the ALT key I get the choice of startup preferences, once I select one, and the system boots up the ports stops working, so before the OS loads the usb ports are working !!!
What to do ??

This is a hardware failure. While USB ports on the whole are just not designed very well, leading to their failures being pretty common, your issue sounds a bit more like the USB controller chip is failing.
In any case, the answer is to take it to a repair shop. If they're smart about it, they'll replace the logic board and see if that also fixes the front ports. If not, they'll replace the front I/O panel as well.

Similar Messages

  • Brand new Macbook pro one USB port stopped working

    Brand new Macbook Pro 15 with Retina display. One of the USB ports stopped working after 24hours.

    Serial Port Configuration and Port definition is reset by
    NVRAM  http://support.apple.com/kb/ht1379
    If no good I would return the machine ASAP:
    Genius reservation http://www.apple.com/retail/geniusbar/
    check warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • After update to OS X 10.7.5 on my Mac Pro (2009) USB ports don't work at all after wake up from sleep mode; with 10.7.4 there was (nearly) any problem.

    hello,
    after update to OS X 10.7.5 on my Mac Pro (2009) USB ports don't work at all after wake up from sleep mode; with 10.7.4 there was (nearly) any problem.
    the used ports appear to be "killed"; the unused USB ports seem to work, but the Mac works in slow-motion.
    The only "solution" is to restart my Mac.
    - SMC-reset, PRAM-reset or repairing user rights had no positive effect; what is the solution - a bug-fix-update???

    I have a mac mini (A1283) with OS 10.7.4. Upon upgrading to 10.7.5 it did not start up again. Instead, the light was on and the hard drive did not start up. The light on the connected USB mouse was not lit.
    My solution:
    Cold start with Command-v pressed.
    This should start Verbose mode (see http://support.apple.com/kb/HT1492 ).
    What happened on my mac mini was that the grey startup screen with the Apple logo appeared for a long while before the login screen came.
    Maybe Cmd-v set open firmware params and fixed some corruption.
    Anyway: my mac mini works again.

  • A barcode scanner that was connected directly to the Mac's USB port stopped working as the "USB had too much power drawn", even though it has worked for over a year in that port.  WHen we plugged it into the port on the keyboard, the device works. Why?

    A barcode scanner that was connected directly to the Mac's USB port stopped working as the "USB had too much power drawn", even though it has worked for over a year in that port.  When we plugged it into the port on the keyboard, the device works. Why?  Obviously the device is operational.  Could the USB port have burned out from having too much power drawn?  If so, is it reparable?

    It can't draw "too much" power, it can only draw as much as the USB port is able to provide and no more. IIRC, the keyboard port has a lower power output than the iMac's port.
    That being said, yea, it's possible that the port has failed and it can be replaced or if another port works you can use that one. Although if it is still under warranty or covered by Apple Care, then I would take it to an Apple Store or service provider to get the port repaired.

  • HT1379 MacBook Pro USB port stopped working

    USB port stopped working....
    How can I diagnose my USB port to test for hardware or software problem

    Try Resetting the System Management Controller (SMC)

  • USB ports stopped working in my Macbook Pro

    USB ports stopped working in my Macbook Pro

    I do not know anything about audio consoles nor do I have an iPhone.
    My iPod also does not show on the desktop but it is recognized in iTunes,  Check if that is the case for your MBP. 
    Do you have the appropriate boxes checked in Finder Preferences?
    See if this support article is of any assistance:
    http://support.apple.com/kb/TS1410
    If you have an external HDD, connect it to your MBP and see if it is recognized.  If it does not show on the desktop, check Disk Utility.
    Have you tried all USB ports?  It could be that the problem lies in your MBP.
    Ciao.

  • One usb port stopped working today

    One of my USB ports stopped working today. I think it may be related to Itunes update today. Has anyone else seen this recently? I restarted my computer - but that didn't help. I have a MacBook Pro - running Lion 10.7.5
    Any suggestions? I saw one USB Hub when I went to Apple --> About this Mac, but couldn't tell if both were there.

    http://www.ehow.com/how_7351075_reset-usb-ports-mac-laptops.html

  • 1 of 2 USB ports stopped working after 10.7.2 upgrade

    I have the newest Macbook Pro.  I upgraded to 10.7.2 today and immediately after, 1 of my 2 usb ports stopped working.   Thought it may be the cable, so I switched cables.  Tried plugging in my iPhone, my portable drive and nothing.   Both work on the other port though.   Both ports worked fine before the update. 
    I've rebooted 4x. 
    Suggestions?

        Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
      If this does not help, contact Apple.
      Genius Bar reservation
      http://www.apple.com/retail/geniusbar/
    Best.

  • HP Pavilion dv6 All 4 USB ports stopped working

    Hello,
    I recently bought a Pavilion dv6-6c11sa laptop. Windows 7 Home Premium 64-bit
    Everything was working fine for about a week, and then yesterday all of the USB ports stopped working. I have 4 USB ports in total, two 2.0 and two 3.0. No matter what peripheral device I plug in, mouse or flash drive etc, they're not recognized by the laptop. The lights don't even light up on the devices, regardless of the port. I've tried uninstalling and reinstalling the drivers in device manager, taking out the battery and rebooting, installing the chipset drivers (AMD), nothing works. No programs had been installed 3 days prior to the occurence, although I had rebooted several times in that time frame. I simply booted up the laptop yesterday, and nothing worked.
    Could anyone offer a solution or suggestion, please?

    Hello,
    I recently bought a Pavilion dv6-6c11sa laptop. Windows 7 Home Premium 64-bit
    Everything was working fine for about a week, and then yesterday all of the USB ports stopped working. I have 4 USB ports in total, two 2.0 and two 3.0. No matter what peripheral device I plug in, mouse or flash drive etc, they're not recognized by the laptop. The lights don't even light up on the devices, regardless of the port. I've tried uninstalling and reinstalling the drivers in device manager, taking out the battery and rebooting, installing the chipset drivers (AMD), nothing works. No programs had been installed 3 days prior to the occurence, although I had rebooted several times in that time frame. I simply booted up the laptop yesterday, and nothing worked.

  • Does the mac pro have usb ports

    does the mac  pro have usb ports?

    http://store.apple.com/us/browse/home/shop_mac/family/mac_pro
    Stedman

  • My USB ports stopped working. So did my dvd drive. I have a Pavillion Laptop. Model 1245dx.

    My USB ports stopped working.  Do did my DVD drive.  I did do a Windows update yesterday.  Any ideas out there?  I can't use my mouse or printer.  Help!

    Try a windows system restore, pick a date before the windows updates were installed.

  • I have a Pavillion dvd Model 1245dx. USB ports stopped working. How can I fix this?

    My USB ports stopped working.  So did my DVD drive.  Any ideas how to fix this?

    Back up all data before proceeding.
    Step 1
    From the menu bar, select
               ▹ System Preferences... ▹ Date & Time ▹ Time Zone
    Check the box marked
              Set time zone automatically using current location
    if it's not already checked. If the box is checked, uncheck it and then check it again. Test.
    If the correct location and time zone aren't shown in the preference pane, then either Wi-Fi is turned off, or you're not within range of a network in the Location Services database. Under those conditions, the computer can't determine your location.
    Credit for this idea to ASC member Easyas314.
    Step 2
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Containers/com.apple.Maps
    Right-click or control-click the line and select
             Services ▹ Reveal in Finder
    from the contextual menu.* A Finder window should open with a folder named "com.apple.Maps" selected. Quit the application if it's running. Move the folder to the Desktop, leaving the window open. Relaunch the application and test. If there's no change, quit again and put the item you moved back where it was, overwriting the one that may have been created in its place. Otherwise, delete the folder you moved. The list of recent places displayed in Maps will be lost.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • Satellite P850 - right hand USB ports stopped working

    I have a new Satellite P850, after a short period the two right hand usb ports stopped working, I only had a wireless mouse plugged into them at the time. Is there a reset for these ports, I have tried uninstalling and reinstalling, no change.
    Any one have any thoughts.

    First of all, I don't think you should have done that.
    The solution, either a full system recover (probably not necessary) or reinstall the drivers manually. Since they are USB 3.0 (I guess for what I googled about the P850) they use different drivers (specially if we are talking about the sleep and charge ones) so go ahead and download them from toshiba website, that should solve it...

  • USB Ports stopped working - Vista Home Premium (32bit)

    I reloaded Windows Mobile Device Center yesterday.  When I got home and booted my computer, all 3 USB Ports and the card reader do not work.  There is power, but no use of the device.  I have read several help posts on this and I have attempted to fix without success.  The one thing I keep reading is the USB Root Hub.  I do not have this in my device manager.  I have uninstalled all of the Universal USB Controllers in attempt to allow Windows to install the drivers.  I am getting a Code 39 error and it says the system cannot locate the preconfigured driver folders.  I cannot use a mouse, printer, or sync my phone without the use of my USB Ports.  Can anyone please help me?
    Terah  

    Hello,
    I recently bought a Pavilion dv6-6c11sa laptop. Windows 7 Home Premium 64-bit
    Everything was working fine for about a week, and then yesterday all of the USB ports stopped working. I have 4 USB ports in total, two 2.0 and two 3.0. No matter what peripheral device I plug in, mouse or flash drive etc, they're not recognized by the laptop. The lights don't even light up on the devices, regardless of the port. I've tried uninstalling and reinstalling the drivers in device manager, taking out the battery and rebooting, installing the chipset drivers (AMD), nothing works. No programs had been installed 3 days prior to the occurence, although I had rebooted several times in that time frame. I simply booted up the laptop yesterday, and nothing worked.

  • USB Ports Stopped working on MacBook Pro 13-inch, Late 2011, OS X 10.8.5

    Please help with any advice
    I have OS X 10.8.5
    One USB port stopped a while ago
    The other stopped yesterday.
    I have reset the PRAM
    I have also reset the SMC
    Nothing seems to fix it.
    I do have a time machine backup
    Any suggestions?

    The best option is a visit to the Apple store genius bar for a FREE evaluation.  You have tried all you can.
    Ciao.

Maybe you are looking for