Mac Pro randomly goes into sleep mode

My (mid 2010) Mac Pro, OS X.6.8, randomly goes into sleep mode and I can't wake it, have to power it off and reboot. Just started to the best of my knowledge Friday (Jan 6, 2012) I've had it happen surfing the web in Safari, while working on an illustration in Adobe Illustrator, while running Apple Hardware Test, using 23" LCD connected by HDMI and DVI-D, Disconnected monitor and connected 12" Cintiq (LCD Tablet).
The monitor goes black, says "there's no signal coming from your computer", none of the keys will wake it. I have to hold down the power button until it turns off then power it back up. The time between the sleeps varies, 38min, 1hr 34min, 5min, 2hr 17min, 12min, etc. I disconnected everything (except keyboard, mouse, monitor) still the same. Opened and removed the ATI Radeon HD 5870, and noticed the PRAM battery, replaced it with a new one, thought that fixed it, worked for a long time then it happened again.
Tried Apple Hardware Tester again, it said everything is fine, ran it again an error popped up: 4SNS/1/40000000:Te1S-99.364, wrote it down then it slept.

The next time this happens open your mac and see if there is still a fan running. If so you are not sleeping, you are in a thermal cutoff. Keep you mac cover off.
Now reboot as you always do. Take a look at the fan in your 5870. Is it spinning? If so, try to keep an eye on it and see if you can "catch" it not spinning.
When the fan doesn't start, or if it does then stops, the card will overheat and the machine will go into thermal cutoff. The amount of time is variable.
I speak from experience. I am currently on my third 5870 video card. Both the previous two had this fan problem. The only wrinkle in my theory for you is that I wouldn't expect more that, say, 15 minutes of up time at the most, not hours like you got. But it may be that your card is starting ok, but stops sometime later. I chalk it up to the lousy fans Nvidia uses in the 5x70 cards.
FWIW, if you happen to catch the fan stopped before the machine goes into thermal cutoff you can give it a little nudge with your finger to get it going again.
I recommend one of the various temperature monitors. I use iStat Menus and display some key temps in my menu bar. Of course after going through two of these cards I am a bit paranoid!
Some other temperature monitors:
iStat Pro
Temperature Monitor
Hardware Monitor
Note, after typing all this I also realized you got a AHT 4SNS error. I would run AHT again to see if you get that error again. If so that means "Check Main Logic Board" and you may have a more serious hardware problem than just a video card! So my other recommendation is that when you machine fails again look inside for any lit diagnostic leds. There's some near the dimms but there are others on the board as well.

Similar Messages

Early 2008 iMac (8,1) randomly goes into sleep mode

Hey,
My early 2008 iMac (8,1) on 10.8.2 goes into sleep mode by itself. I've played around in Energy Saver, tried resetting SMC, NVRAM, replaced HDD, reformatted HDD, installed smcFanControl, reinstalled Snow Leopard, Lion, Mountain Lion. None of that worked. Took it to the Genius bar, performed some diagnostics tests and they said everything worked properly. Does anybody have the same problem? I can still use the computer for general computer use (light web surfing and e-mailing), but it seems to go into sleep mode when I have a lot of applications open and especially when watching videos. I've tried researching this problem, but I've haven't found a definitive answer. Right now, the Genius that I've been talking to thinks it may be the RAM. I'm waiting on new shipments of test RAM to arrive at the Apple Store for him to properly diagnose.
Thanks,
Jason
iMac (8,1)
2.8 GHz Intel Core 2 Duo
2x2 GB 800 MHz DDR2 SDRAM
ATI Radeon HD 2600 Pro 256 MB
1TB 7200 RPM SATA ST1000DM003-1CH162
If you want to read the whole time line, I've included it here. I apologize for it being so long.
At first I was running Lion (10.7.5) and the computer would enter sleep mode whenever I was doing anything with video. For example, watching YouTube videos and chatting on FaceTime. And funny enough, I distinctly remember watching a bunch of movies with VLC and the computer did not go to sleep (Although, this is not true anymore). I could wake the computer up and use it, however within a few minutes the computer would re-enter sleep mode. The computer seemed fine and I could access all of my files. Tried resetting SMC and it did not resolve the issue.
I made a Genius appointment to see if they were familiar with the issue. The iMac passed the in-store diagnostics test; it said all the components were functioning properly. He told me to bring it home to do a fresh re-install of my OS and then run my computer to see if the problem persisted. I took it home and reformatted my HDD with a 35-pass erase, re-installed Snow Leopard (10.6.8) and declined to transfer any backups from Time Machine. I was using a fresh system and sure enough, the problem persited. Tried doing the same thing again but with Lion (10.7.5) and still no luck. So I made another appointment and it passed the in-store diagnostics test again. I let them keep the computer for a 24-hour diagnostics test. They told me they would diagnose my computer with the OS on my HDD as well as a copy of OS that the Apple store deemed 'good' on an external HDD. The Genius called me and told me that my HDD failed their 24-hour diagnostics test and recommended I replace it. I initially had a 750 GB HDD, and the Apple Store could only offer me a 500 GB HDD ($200). I opted to take my computer to Carbon Computing, an authorized dealer in Toronto, to have a 1 TB Seagate HDD ($170) installed with no OS on it. I brought it home, performed another 35-pass erase and installed Snow Leopard. Problem still persisted. Repeated with Lion, still unsuccessful. Looking back, I was so excited that I just had to replace the HDD to fix the problem, I forgot to ask the guy if he could recreate the issue.
I began to suspect that it was a heating issue. So I installed Temperature Monitor and smcFanControl, and cleaned the fans as much as I could without taking the computer apart. Without smcFC on I tried to recreate the problem and I noticed that the Power Supply Position 1 reached 95 degrees Celsius, and Graphics Processor Temperature Diode reached 97 degrees Celsius before entering sleep mode. I don't know much about temperature sensors and what they monitor specifically, and so I couldn't draw any conclusions from that data. I turned on smcFC and cranked the optical drive speed to 2000 RPM, HDD to 3000, and CPU to 3000. The computer still went to sleep but the temperatures were below 90 degrees Celsius before entering sleep mode. I've tried researching here and on the internet about normal operating temperature ranges of iMacs and generally found that most do reached that temperature but they do not go to sleep mode.
Then I thought it may be a problem with Lion so I upgraded to Mountain Lion. The issue still persisted. Tried resetting SMC and NVRAM, did not resolve issue.
I called the same Apple Store explaining to them that their recommendation of replacing the HDD did not resolve the issue. They told me to bring it in and have them check it out again. I went through the same process I did before; the iMac passed all of their diagnostic tests. The Genius told me this time he will test out the RAM. He called me and told me that he could replicate the problem and so he proceeded to put in a stick of 'good' Apple RAM, but the computer would not work. He said the 'good' Apple RAM was damaged, either before or in the process of putting it in. He plugged in my old stick of RAM and the computer worked. He tried to recreate the problem and claimed that the computer ran for over 24 hours with an existing movie on my HDD playing and it did not go to sleep mode. However, once I brought it home I played the same movie right away and it turned off 17 minutes into the movie. Tried resetting SMC and NVRAM again, ran the movie again, still went to sleep.
And that's the story for now...

Now to find out WHY it does it at home only. How hot is it at home? Have you checked the AC current/voltage at home?
Well they were able to replicate the issue at the Apple Store the second time I left my computer there. Anyway, we don't have any heating on at my house at the moment. It's usually from around 20-23 degrees Celsius (72-75 F). Temperature Monitor says ambient temperature is 30 degree C though...
I'm not really sure how to check the AC current/voltage at home, but my computer worked before I moved it. So I'm not sure if that is the issue.
I normally only have speakers set up to my computer and a wired keyboard. The speakers are powered separately. I would assume that at the Apple Store only the power cord and wired keyboard are connected.
What is the Power Supply Position? And what does it do?
Thanks for your help!

Imac Randomly goes into sleep mode...Hard to start

My IMAC G5 will randomly go into sleep mode while I am in the middle of using it. Typically the fan noise increases and than it auto goes into a sleep mode. It also has issues starting. I have to press and hold the power button for it to kick on while also hitting keys on the keyboard to trigger it. Help!?

Here is the system log it looks like its over heating?
Sep 22 20:37:11 Macintosh-2 mDNSResponder[23]: mDNSPlatformSendUDP sendto failed to send packet on InterfaceID 00805E00   en0/6 to FF02:0000:0000:0000:0000:0000:0000:00FB:5353 skt 8 error -1 errno 50 (Network is down) 1852846483
Sep 22 20:37:11 Macintosh-2 mDNSResponder[23]: mDNSPlatformSendUDP sendto failed to send packet on InterfaceID 00805E00   en0/6 to FF02:0000:0000:0000:0000:0000:0000:00FB:5353 skt 8 error -1 errno 50 (Network is down) 1852846774
Sep 22 20:37:12: --- last message repeated 1 time ---
Sep 22 20:37:12 Macintosh-2 mDNSResponder[23]: mDNSPlatformSendUDP sendto failed to send packet on InterfaceID 00805E00   en0/6 to FF02:0000:0000:0000:0000:0000:0000:00FB:5353 skt 8 error -1 errno 50 (Network is down) 1852847774
Sep 22 20:37:13 Macintosh-2 kernel[0]: UniNEnet::monitorLinkStatus - Link is up at 100 Mbps - Full Duplex (PHY regs 5,6:0x45e1,0x0005)
Sep 22 20:37:15 Macintosh-2 kernel[0]: IOSMUPwrController:: OverTemp notification
Sep 22 20:37:15 Macintosh-2 kernel[0]: PowerManagement emergency overtemp signal. Going to sleep!IOPMSlotsMacRISC4::determineSleepSupport has canSleep true
Sep 22 20:37:15 Macintosh-2 mDNSResponder[23]: Note: Frequent transitions for interface en0 (70.162.10.190); network traffic reduction measures in effect
Sep 22 20:37:21 ip70-162-10-190 configd[35]: setting hostname to "ip70-162-10-190.ph.ph.cox.net"
Sep 22 20:37:24 ip70-162-10-190 kernel[0]: System Sleep
Sep 22 20:37:24 ip70-162-10-190 kernel[0]: System Wake
Sep 22 20:37:24 Macintosh-2 kernel[0]: Wake event 0020
Sep 22 20:37:24 Macintosh-2 configd[35]: setting hostname to "Macintosh-2.local"
Sep 22 20:37:24 Macintosh-2 mDNSResponder[23]: Note: Frequent transitions for interface en0 (FE80:0000:0000:0000:0214:51FF:FE97:7AA2); network traffic reduction measures in effect
Sep 22 20:37:24 Macintosh-2 mDNSResponder[23]: mDNSPlatformSendUDP sendto failed to send packet on InterfaceID 00805E00   en0/6 to FF02:0000:0000:0000:0000:0000:0000:00FB:5353 skt 8 error -1 errno 50 (Network is down) 1852859586
Sep 22 20:37:29 Macintosh-2 kernel[0]: USB (EHCI):Port 1 on bus 0x4b has remote wakeup from some device
Sep 22 20:37:29 Macintosh-2 mDNSResponder[23]: mDNSPlatformSendUDP sendto failed to send packet on InterfaceID 00805E00   en0/6 to FF02:0000:0000:0000:0000:0000:0000:00FB:5353 skt 8 error -1 errno 50 (Network is down) 1852860588
Sep 22 20:37:31 Macintosh-2 kernel[0]: UniNEnet::monitorLinkStatus - Link is up at 100 Mbps - Full Duplex (PHY regs 5,6:0x45e1,0x0005)
Sep 22 20:37:32 Macintosh-2 mDNSResponder[23]: Note: Frequent transitions for interface en0 (70.162.10.190); network traffic reduction measures in effect

My laptop randomly goes into sleep mode

I'll randomly be on a site or listening to music and then all of a sudden it goes into sleep mode. I'm very aware that it goes to sleep while you've been away from your computer, but it'll go into sleep mode while I'm using the computer. I changed the power setting so that it takes longer to get into sleep mode thinking that would help, but it doesn't. I ignored it at first but it happens more often now and its getting annoying. Sometimes I'll move the mouse pad to wake it back up and it sounds like its going to come back, bit it just goes to sleep again. Its really annoying and frustrating and I don't know what's wrong with it. Anyone have any idea what's wrong with it and how to fix it? My warranty expired this passed March and I can't afford to get it fixed.

"I put a new anti virus on my computer and the sleep mode problem didn't happen after I removed hazardous files on my computer."
Go to any good anti Virus removal forum, SpyBot S&D, Bleeping Computer, others, and start a thread.
They probably will want you to run a DDS log, ERUNT, follow there instructions!
The forum Volunteers that assist you on these sites are busy and it may take up to 3 days for them to start your thread, have patience, they will help.
You may have inadvertently removed/modified part of your operating system (keylogger/screencapture) when removing the malware.
Do not just rely on a recovery point!
Hope you have recovery disks made, and/or a mirror image.
> Was your question answered? Mark it as an Accepted Solution!
> See a great post? Click on the white star and give it a Kudos!

My iPad randomly goes into sleep mode while I am using it?

All of a sudden, when ever I use my iPad 2 it goes into sleep mode. It did it three times while I typed this message. As I am running an app it will just go into sleep mode with out me doing so and I have to press the home button to wake it up. Doesn't matter what app I am running. I have 4gb of storage available. Most of the time it brings me back to the app I was using when it went to sleep. Has anyone else suffered this issue. I am running the latest iOS 6.0.

What "issue"? This is perfectly normal. By default, all (fairly-recent) Apple products will go to sleep if left idle for a certain period of time. This is NOT normal, however, if in the app, you are pressing buttons on the screen. If you are doing something like reading, for example, try setting your iPad to not go to sleep that quickly.
(Google how, I don't completely remember.)

HT1338 Mac pro wont go into sleep mode

My mac pro has to physically be restarted everytime it should go to sleep. I run it through a flat screen TV and when I go to sit down and use my computer the screen is black and the indicater light on the front of my computer is solid, not flashing. Also I had my computer set up to turn off around 1 am and automatically turn on before I woke up in the morning, I have since turned this schedule times off but my computer is still following the schedule. I updated to today, but all this started after the most recent update. The only way for my computer togo into sleep mode is to physically push the button on the front of the MAc Pro tower.

System Preferences/Energy Saver - set Computer sleep to never. At times the OS fails to detect activity and allows sleep even though there is something going on.

Mac Tower Pro 10.8.5 keeps going into sleep mode

Purchased from Apple, refurbished 2012 Mac Tower Pro. At the same time, purchased a new Dell U2713HM, 27" monitor.
Have been operating on this new system since about the first week of December 2013.
Issue:
The computer has constantly gone into sleep mode after a few minutes of no activity. I can have iTunes radio playing, but the system still goes into sleep mode. As I am typing and moving the curser, the machine stays awake.
This has caused much frustration because when it goes into auto sleep mode, it quits all programs that I am in, and when it does this, I lose all the work I had accomplished. It litterally closes everything and goes to sleep in about 2-3 minutes of no activity.
BTW: the computer and monitor have all its new OEM cables that came in the box, when I purchased the units.
Solutions attempted:
System Preferences — Energy Saver: computer sleep and display sleep set to "never" and unclicked the box "Put hard disks to sleep when possible."
Dell settings: Turned off all energy savers.
Results:
Nothing. Problem persists.

I apologize for the angst. The problem has cost too much money in lost time and material because when it would automatically shut down after a few minutes, all my work was lost.
I misunderstood the terms of the warranty. Thank you for your input and patience. Much appreciated. For the benefit of others that experience this with a new Mac that auto shuts down. Check the following:
1. Go to System Preferences.
2. Click on Security and Privacy.
3. Click on Advanced (bottom right corner)
4. If the first line is checked (Log out after 5 minutes of inactivity); uncheck it and then click OK button.
5. Be sure to click the lock before existing Security and Privacy.
Now the machine will cease shutting down programs to go into sleep mode as soon as machine is inactive for a few minutes.

My new macbook pro retina randomly goes into standby mode

My new macbook pro retina randomly goes into standby mode. I have to close the screen and wait a few seconds and re-open it in order for it to come back on.
Sometimes it immediately goes back into standby mode again after closing and reopening the screen. I have checked the battery level everytime, and it has never been below 40% when this occurs. Is this a Mountain Lion issue?

Well I fixed my problem.
I took it into the Apple store. Even without the other two monitors they were able to recreate the problem. One symptom (I had) was that one of the Hot Corners was set to Disable screen saver. If you then put your cursor there, you'd go into screen saver mode. Change the setting to another corner and the problem follows you there.
The Apple person at the Genius bar logged out as me and back in as test and same problem. He tried some stuff and finally said I needed to wipe the drive and reinstall the OS (Lion). I'd only had the machine for 12 hours and had just migrated my data to it, so I didn't mind doing that. I did it at home.
Problem solved.
BUT... then I reinstalled the driver for my EVGA UV Plus 19 (most current drivers) and bingo problem back. Uninstall. Problem gone. I'm now using mini display port to DVI for one monitor and HDMI for the other I think the machine is a bit warmer this way (versus using a USB to the EVGA device) but at least it's not sleeping all the time. Someone might say "it (the heat) is your imagination" or something else. Or someone might say "use the other thunderbolt port for another mini-display port to DVI" but I need that for the LAN... c'est la vie.
Maybe I'll write to evga and see what they say. Maybe they'll fix their driver and/or Apple will fix it.

Week old IMac G5, Version 10.5.2, goes into "sleep" mode randomly....

My sister has a brand new IMac G5, OS X version 10.5.2, the screen randomly will go black, it still stays on, it's like it goes into sleep mode, but force quit wont work, nothing works, restart is required in order to get out of it.
On another note, when she restarts the computer, and sometimes when she's just starting it up not on a restart, the computer will have colored lines running down the whole screen, when it gets to the blue loading screen, it freezes there, where once again it requires a restart. Problem is, the computer is less than TWO WEEKS OLD. I've had my mac for years and cant figure out the problem, anyone that knows of, or has had similar problems and had them fixed that could help out would be nice. Thanks!

In fact, what your sister has is an intel iMac, not a G5, those were discontinued a couple of years ago. She has telephone support for 90 days and should call Apple immediately for a solution to her problem.

Late 2012 Mac mini with OSX 10.8.2 has started shutting down instead of going into sleep mode.

Sometime in the last week or so my mac mini has started going into full shut down instead of sleep mode.
I have tried checking and unchecking energy saver boxes but haven't found anything which will get me back to where I used to be - and I haven't knowingly changed anything to make this happen.- maybe an OS update caused it?
The machine will fire up with a tablet click rather than needing the reset button to be pushed so clearly the machine is sort of halfway between sleep and full 'off'. Most frustrating as one of the key issues for me in getting this my first mac was its easy sleep and super quick fire up compared to windows.
Any help appreciated
Oh yes I just remembered that I did just install 2 8gb of crucial RAM (to replace the supplied 2 2gb but surely that can't have anything to do with it - can it)?

Adding to my first post I can now advise that when the mac goes into sleep mode the light on the front stays on (it does not pulse so clearly it is not really sleeping).
When i click the tablet / keyboard this is actually what triggers the mac to reboot
I have tried resetting the SMC as per the following link to no avail
http://macs.about.com/od/usingyourmac/qt/Resetting-The-Smc-System-Management-Con troller-On-Your-Mac.htm
Help please!

Macbook pro goes into sleep mode after few minutes and won't wake up

Since yesterday my MB pro suddenly goes in sleep mode while working and won't wake up. After reset the MB Pro goes into Sleepmode befor I get the log in screen. After resettin SMC and PRAM I can log in but after a few minutes, againg deep sleep. I'ts not a software isue I think because when I use my MB Pro's harddrive by firewire as the startup disk on an other macbook it works fine. anyone knows about this problem?

It sounds obvious but are you sure your power adapter is ok and the battery is charged. The behaviour sounds a lot like low battery sleep.
Press the check button on your battery pack - do you get plenty of lights?

Mac goes into sleep mode amd doesnt come out!!!!!!!

Hi, new to this so sorry if this is a dum question. I have installed Snow Leopard on my IMac and Air. No prob on the Air but probs with the IMac. Everytime it goes into sleep mode I get a black blank screen and it wont come back up? have to reboot everytime or leave front row on with a slide show! any ideas welcome?

I looked around the internet and found an old post that seems to have solved the problem. I had a relatively new USB port (powered) that I unplugged and, ta da, the problem disappeared. I'm not sure why this happens (I'm not a tech person) but it seems like this should have been worked out in testing somewhere.

How can I select shutdown & close the display w/o going into sleep mode?

I have learned to wait untill the MBP full shuts down before closing the display. In the past I have pressed shutdown closed the display only to find out later the MBP goes into sleep mode before fully shuting down. When I reopen the display the computer finishes the shutdown process or worse the battery is dead.
I would like to select shut down, close the display and walk away while the computer completes the shutdown process.
Is there any setup options or apps. that will allow this?
Thanks, Joe
(new to the mac)
MBP Mac OS X (10.4.6)

Well hello there, and welcome to Macintosh.
Unfortunately you can't change anything to stop this from happening. The shutdwn process goes about its business killing processes and applications that have been running. The sleep process interrupts ALL business going on in the OS, and puts the machine into low power mode, as it is not aware of the nature of the running processes (in this case, the shutdown process), knowing only that they must be slept and the machine dropped into sleep mode. You gotta wait it out before you close the lid.
I would suggest sending a message in OS X feedback requesting this as a feature!
If you find this response helpful or if it solves your issue, please click the appropriate icon in the header of this reply.

Prevent my MacBook Pro to turn into sleeping mode

How can I prevent my MacBook Pro to turn into sleeping mode when playing music on it with Itunes?

System Preferences -> Energy
Put slider to "Never". But this will prevent your Mac to never turn into sleeping mode, not just when playing music.

Unexpectedly goes into Sleep Mode... All the time!

I've had this Powerbook for about 2 years now, and I've got some problems. About every 5 or 10 minutes, it goes into sleep mode! It acts as if I close the screen, so I wake it up by pressing the spacebar. But sometimes... pressing the space bar doesn't wake it up, not even holding the power button turns it off! I have to remove the battery to restart it! Can someone help please?
By the way, I checked "Power Save" settings in System Prefs and everything seems to be correct.

If you have issues with a Mac or display that goes to sleep at inappropriate times, you may have a problem with Energy Saver. Delete the following .plist files and restart:
-/Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plist
-/Users/username/Library/Preferences/com.apple.systemuiserver.plist--
(username is your name or System Administrators name)
-/Library/Preferences/SystemConfiguration/com.apple.AutoWake.plist
A restart is very important after deleting these plists. After a reboot your Mac will then generate new ones.
Some, in these forums, have had luck fixing sleep issues downloading the Combo update from this site (yours may be corrupt), not Software Update, disconnect all firewire + USB devices except keyboard + mouse, Repair Permissions, re-install update, Repair Permissions again + try.
Yours would be the 10.4.7 Combo update. Others reading, download the combo update that applies to you!
Cheers!
DALE

Mac Pro randomly goes into sleep mode

Similar Messages

Maybe you are looking for