MacBook 2006 w/Snow Leopard; HP B210 printer; print problem; error message: One or more components of the HP printing software are corrupted or missing. Reinstalled software but Mac will not cause printer to print.

? MacBook 2006 w/Snow Leopard; HP B210 printer; print problem; error message: "One or more components of the HP printing software are corrupted or missing..." Reinstalled software but Mac will not cause printer to print. My MacBook Pro works fine with same wireless printer.

Hi ArielAce , thanks for getting back to me!
I would recommend downloading and running the HP Print and Scan Doctor.
Please keep me posted!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Similar Messages

When I try to print my book I receive the following error message: One or more of the images in your book are not presently available at full resolution. Please reconnect to these files by mounting the volume(s) containing the original images.

When I try to print my book, I receive the following error message: One or more of the images in your book are not presently available at full resolution. Please reconnect to these files by mounting the volume(s) containing the original images. I don't understand what this means since all the photos are in the book. Can someone please clarify?

When you look at the images in the browser, do you see any arrow icons on your thumbnails? Like these:
When you import your images from a folder on your system drive, you have two ways to import:
Managed: Import and store the images in the library
Or referenced: Leave the images in the folder outside the Aperture library.
This is controlled by the "Store Files" settings in the Import panel:
If you did not set "Store files" to "In the Aperture Library", the originals will stay in the folder outside.
The error message you get, suggests that Aperture assumes the original files are in a folder outside the library.
Select one of your images in the Browser and use the command "File > Show in Finder" - is this command available or dimmed out?

Dual Core Macbook (2006) and Snow Leopard

I was ready to pre-order Snow Leopard, but now I'm not sure. I accept that it won't work with my ancient G4, or my old Mac Mini. But ...
My wife's Macbook has Dual Core 2. No problem. Mine, however, is the very first Macbook - with only a Dual Core processor (without the "2")
Anybody have a clue whether or not I'm in an unfortunate technological gap?

Kappy wrote:
Everything that currently runs will continue to run without problem, and requires no modification.
There are no compelling reasons not to upgrade, but I always suggest you examine the information on the upgrade to decide if you really need it. No matter what the upgrade involves it's likely that some older applications may no longer work with the new version. I would not upgrade until you know your mission critical applications will work with the new version. If you want to try it out then install it on another hard drive you can use. That way you can test out the new version without making any changes to your normal system.
Found this web site .. may help for apps:
http://snowleopard.wikidot.com/

My Mac Book currently is using snow leopard, which is an upgrade. I would like to upgrade again to the mountain lion so I can use my new nano iPod. Will my Mac Book be compatible?

I am currently running an upgraded OS X 10.6.8 on my MacBook. I would like to upgrade to the Mountain Lion. Is my MacBook system compatible to run that version?

Choose About this Mac from the Apple menu, click on More Info, and check the model identifier against the following, which are the earliest MacBooks of each type that can run Mountain Lion and newer:
MacBook5,1
MacBookPro3,1
MacBookAir2,1
A Mac older than those listed which has a Core 2 Duo(not Core Duo) or better CPU and at least 2GB of RAM can run Lion 10.7, which is available by clicking here. Neither Yosemite nor Lion support PowerPC software such as Microsoft Office 2004.
(124717)

When i change my os x 10.5 to snow leopard i have adobe creative suite can i just copy this back from the back up or do i have to reinstall it from its disc?

Hi all
i am finally changing my os x 10.5 to 10.6 late i know, but i was wondering i have adobe creative suite on my mac which i use for business pupouses and i wanted to know if after i change the os x system do i have to re-install these programs from their original disc or can i just copy them back onto my mac from their backup .
thank you for any help

Glad I asked...
I would Strongly suggest that you get yourself an External Hard Drive... and create a Bootable Clone Backup of your current Hard Drive...
By far the easiest way to make such a Backup, is to use something like
SuperDuper http://www.shirt-pocket.com/
or CCC http://www.bombich.com/
That way, should anything untoward happen during the Upgrade,
You will NOT LOSE ANYTHING.
(Get an EHD that is at least equal to your current Drive...)

Time Warner Arris router/modem will not allow me to print wirelessly

Time Warner recently installed an Arris mode,/router and now I cannot print wirelessly to my HP printer from my iphone, ipad or macbook pro. I could do this when I used a Belkin modem with the Arris router. Any suggestions?

Something you might check is the Bonjour service in the router. If the router doesn't support Bonjour services, you will not be able to use it to print from any apple device via AirPrint. You can still print from a Mac PC if the drivers are installed, but you will not be able to print from any iOS device. You can use the app below to test the network to see if it will alow Bonjour services. Let me know what you find.
Bonjour Browser
I am a printer tech for HP.

Updated to OS X Snow Leopard, now I'm having problems

i just updated to OS X Snow Leopard, now I'm receiving an error message when I try to print on my Epson? Any Ideas on how I fix it?

And the error message is?
Use these drivers:
http://support.apple.com/kb/DL1398

HP 1312nfi Multi-funtion printer & brand new Macbook Pro with Snow Leopard

Hi,
I just got my Macbook Pro with Snow Leopard May 2010. I can only print and fax with my 1 year old HP 1312nfi color laserjet multi-function printer. I cannot SCAN at all. I tried loading the software that came with the printer but it wouldn't install the 'Print Director' as I had on my old iMac (with Leopard). Then I went to HP and it said not to install the software that came with the HP printer because Snow Leopard has it all. I read that there are 3 ways to scan from my computer which none of them work. I brought up the printer then clicked printer setup and when I try to bring up the 'print utility' from the last tab, it won't open anything. Where is the printer utility now? Why can't I scan? There has to be a way. HELP please?

Found the answer on the HP site. It's the original software that works with this printer OS X 10.6!!
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=18972&prodSeriesId=3558902&prodNameId=3562006&swEnvOID=219&swL ang=8&mode=2&taskId=135&swItem=ma-60835-3

I have a MacBook Pro with Snow Leopard. After connecting my HP Photosmart D110 to it, the printer works but the scanner doesn't. The message is"The scan cannot be performed because another program has control of the HP imaging device". Can anyone help?

I have a MacBook Pro with Snow Leopard. After connecting my HP Photosmart D110 to it, the printer works but the scanner doesn't. The message is"The scan cannot be performed because another program has control of the HP imaging device". Can anyone help?

Found the answer on the HP site. It's the original software that works with this printer OS X 10.6!!
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=18972&prodSeriesId=3558902&prodNameId=3562006&swEnvOID=219&swL ang=8&mode=2&taskId=135&swItem=ma-60835-3

Recently updated m old 2004 macbook pro to snow leopard 10.6.8, I opened a word doc. and it automatically opened in iwork '08? Now I can not print old or new docs? Help - do I have to update to iwork? Is this an update or do I have to buy iwork?Thanks

I have a couple of questions? 1. I recently updated my old '04 macbook pro to snow leopard 10.6.8, when I went to open an old word doc., it opened with iwork and will not allow me to print until I update to iwork'08. Do I have to update? If I do, is this an update or do I have to purchase iwork? 2. Can I update my old '04 macbook pro to Lion or Mountain Lion or is this too much? I just purchased and iphone 5 but do not know if Snow Leopard can give me the future updates I might need?? Also does icloud work with Snow Leopard? Thanks for help, I am lost...

Try resetting your SMC and NVRAM before attempting to install again.
Resetting the NVRAM/PRAM
Note: This will not delete any data.
The NVRAM/PRAM stores information such as speaker volume, screen resolution, startup disk selection, and recent kernel panic information (if any). You should reset the NVRAM/PRAM if you experience issues relating to these functions.
Shut down the computer by going to Apple () > Shut Down…
Select Shut Down or allow the computer to shut down automatically.
Turn on the computer by pressing the Power Button.
On the built-in keyboard, press and hold the Command (⌘), Option (⌥), P, and R keys before the gray screen appears.
Continue to hold down the keys until the computer restarts and you hear the startup chime for the second time.
Release the keys on the built-in keyboard.
Resetting the SMC of an Intel-based portable Mac with a battery you should not remove on your own
Note: This will not delete any data.
The SMC is responsible for controlling various system functions. None of your data will be deleted by resetting the SMC.
Shut down the computer by going to Apple () > Shut Down…
Select Shut Down or allow the computer to shut down automatically.
Plug in the MagSafe power adapter into a power source and then connect it to your Mac if you have not already done so.
On the built-in keyboard, press the (left side) Shift (⇧), Control (⌃), and Option (⌥) keys and the Power Button at the same time.
Release the (left side) Shift (⇧), Control (⌃), and Option (⌥) keys and the Power Button at the same time.
I hope I helped.
Austin

I have a macbook pro running snow leopard. Just recently I cannot view youtube videos and other online videos. I recently updated my flashplayer plugin and I believe that is the problem. Is the latest flashplayer plugin compatible with 10.6.8?

I have a macbook pro running snow leopard. Just recently I cannot view youtube videos and other online videos. I recently updated my flashplayer plugin and I believe that is the problem. Is the latest flashplayer plugin compatible with 10.6.8? If this is so, I need to find an older flash player plugin to reinstall. I do not want to upgrade from 10.6.8 at this time because I have 18 yrs. worth of financial records on Quicken that I have read will not work with Lion and I've read bad things about running music programs on Maverick.

rayvonr wrote:
...I have 18 yrs. worth of financial records on Quicken that I have read will not work with Lion and I've read bad things about running music programs on Maverick.
1) Quicken 2007 for Intel (Snow Leopard, Lion, Mt. Lion and Mavericks) is a full featured app that can be downloaded from Intuit for $15 and will work with your data file if you are using Quicken 2005, 2006 or 2007 (if you version is earlier, let me know for more instructions on easy conversion):
http://quicken.intuit.com/personal-finance-software/quicken-2007-osx-lion.jsp
2) Partition your hard drive, or add an external hard drive and install Mavericks there and "dual-boot" to operate your music programs in Snow Leopard and experiment with them in Mavericks.
DO NOT install Mavericks over Snow Leopard!

I have quicken 2000 for mac on an old mac and wish to upgrade to a new laptop running snow leopard. Quicken 2006 on my new laptop runs, but will not recognize the old data qif files. What version of quicken for mac will recognize files from 2000?

I have quicken 2000 for mac on an old mac and wish to upgrade to a new laptop running snow leopard. Quicken 2006 on my new laptop runs, but will not recognize the old data qif files. What version of quicken for mac will recognize files from 2000? Or, is there a special procedure I should be following?

can't open Quicken 2000 files in classic mode on new MacBook Pro version 10.6.7

My phone is not listed on the itunes device sidebar when I plug in with the usb cord ... cant figure out why.... did just update macbook pro to snow leopard though?

My iphone is not listed as a device in the itunes side bar after i plug in to usb port? It used to show up fine - only change I think is that I upgraded macbook pro to snow leopard? Any ideas of what I might need to do?

http://support.apple.com/kb/HT1747
follow this link. see if it helps.

Print a custom Error message in the XML bursting program's log file...

Hi,
I having this requirement, where i need to print a custom error message in the xml bursting program's log file.
Actually i am having a report where i create invoices and then those invoices are emailed to the respective customers, now say if a customer has three contacts and there is only two valid email id's so what happens is bursting will be successful for two contacts whereas the third contact dosen't get any emails. when this happens i need to log a message in the bursting programs log file stating a custom message.
Two things i want to know..
1- Whether is it possible to write into the xml bursting programs log file
2- If yes, then how..
note: it ll be greatly appreciated if the answer is elaborated.
thanks,
Ragul

Hi,
I having this requirement, where i need to print a custom error message in the xml bursting program's log file.
Actually i am having a report where i create invoices and then those invoices are emailed to the respective customers, now say if a customer has three contacts and there is only two valid email id's so what happens is bursting will be successful for two contacts whereas the third contact dosen't get any emails. when this happens i need to log a message in the bursting programs log file stating a custom message.
Two things i want to know..
1- Whether is it possible to write into the xml bursting programs log file
2- If yes, then how..
note: it ll be greatly appreciated if the answer is elaborated.
thanks,
Ragul

HT201465 I have installed software for a HP Deskjet 1510 printer but it will not print

I have OS X Yosemite 10.10.3 and I just purchased a HP Deskjet 1510 all-in-one printer. I have installed the software and my computer is picking up the printer but it will not print. I have restarted the computer and it still will not print.

Hello jamesettafromfl,
If you continue to have issues setting up your new printer in Yosemite, you may find the information and troubleshooting steps outlined in the following articles helpful:
OS X Yosemite: Add or remove a printer
OS X Yosemite: Printing troubleshooting
Sincerely,
- Brenden

MacBook 2006 w/Snow Leopard; HP B210 printer; print problem; error message: One or more components of the HP printing software are corrupted or missing. Reinstalled software but Mac will not cause printer to print.

Similar Messages

Maybe you are looking for