Macbook Air 11'' (mid 2013) My display isn't running as smooth as it was before, especially when using multi-gesture commands

Hello, the major issue is that when I use a multi-gesture command like 2 finger swipe to check out my notifications or when I use 4 finger swipe to switch between apps, the edges of the app or window kind of get cut. Ignore the ghost effect in the picture. That's just because of the camera. Anyway, so you see that some widgets and the window on the right are like cut. Also when I do 4 finger swipe up or down, the windows don't move smooth at all. It looks more like a horribly done stop motion movie. An other thing is that when I hover over the dock, the magnifying effect vibrates for an instant before it fully magnifies and also when I'm hovering away it vibrates before it returns to its normal size. Also when I move the cursor quickly from one side to an other within the dock, sometimes the dock also gets cut. I started to notice these issues a little while after the update for issues with WiFi and Photoshop, maybe it has something to do with that. Any help is welcome.

Reset PRAM.  http://support.apple.com/kb/PH4405
If this does not help, contact Apple.
Best.

Similar Messages

  • Can I use my Macbook Air 13" mid 2013 with plugging charger even at 100 % battery full charge?

    I can't decide whether using My Macbook Air 13" mid 2013 with charging power adapter connected even though it is fully charged Or using Macbook Air with unplugging charger after fully charged. Please advice me to maintain my Macbook's battery at good condition.

    It will not hurt it as long as you do not leave it on the charger for an extensive period of time (say, days).

  • Macbook Air 11" (Mid 2013) takes time to become active after being inactive for a while

    I've got Macbook Air 11" (Mid 2013). But it has an issue of taking up some time to be active after it has been inactive for a while (like when i dont use it for a while the macbook autosleeps and then when i want to work on it and try to get it active the screen only shows mouse pointer in a black screen and then the other components like the small window where you enter password and other takes time to appear...)
    plz help...I've been facing this problem for 2 weeks now...and wanna fix it as soon as possible....plz help...

        Hope this helps.
        http://support.apple.com/kb/PH13976
    Start up in Safe Mode.
    http://support.apple.com/kb/PH14204?viewlocale=en_US
    Best.

  • Macbook Air 11" mid 2013 battery

    My macbook air 11" mid 2013 serial # C02KTARJF5N8 is showing only 4:30 hrs on the battery meter at the top on a full charge and is advertized to last for 9 hr

    I would suggest going into the apple logo, selecting about this mac, more info, then system rpoert, from there you will see power. Click on this and It will show a charge remaining and cycle count, ring apple with this info and they will tell you if theres a problem straight away. It will alsow show the condition and you will find out more info there. Also if your running RAM heavy apps this will effect battery life, but if theres a fault you will see it there. Any issues ring apple and they will tell you if theres an issue hope this helps

  • MacBook Air 13" Mid 2013 Display go Blank

    I have set my MacBook Air Energy Saver setting to its default settings...
    When its go on standby mode then i click/swipe on trackpad immidiately , Display going blank but keyboard Is working.
    And if i wait 10 to 15 sec after standby then there is no issue.
    Please Advice me how to fix it

    If you take a look at these (very lengthy) threads, you will see this is a widely reported problem, for which Apple have yet to produce a solution.  It is said that they are working on a firmware update that will address it but this has been talked about for a long time and still no update.
    https://discussions.apple.com/thread/5118135?start=0&tstart=0
    https://discussions.apple.com/thread/5475679?start=0&tstart=0
    https://discussions.apple.com/thread/5495588?start=0&tstart=0
    The current "solution" (which is not a solution) given by Apple is to set sleep mode to 'never', or to wait a few secconds after sleep before waking the MBA, or install the free App 'Caffeine" which allows you to manually activate sleep and wake.
    Some persons have claimed a "bare metal restore" of the operating system resolved the problem but others have tried this without success.

  • How come my Macbook Air 11inch mid 2013 is running very slow?

    I recently bought it new, then couple months later, the fan would play very loudly, and everything went slow and laggy. I checked activity monitor and it says kernel_task is taking up a lot. Please let me know if there are any ways to make my macbook run back to normal, thank you!
    EtreCheck version: 2.1.1 (104)
    Report generated December 6, 2014 at 10:21:26 AM EST
    Hardware Information: ℹ️
      MacBook Air (11-inch, Mid 2013) (Verified)
      MacBook Air - model: MacBookAir6,1
      1 1.3 GHz Intel Core i5 CPU: 2-core
      4 GB RAM Not upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1600 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1600 MHz ok
      Bluetooth: Good - Handoff/Airdrop2 supported
      Wireless:  en0: 802.11 a/b/g/n/ac
    Video Information: ℹ️
      Intel HD Graphics 5000 -
      Color LCD 1366 x 768
    System Software: ℹ️
      OS X 10.9.5 (13F34) - Uptime: 5 days 20:36:42
    Disk Information: ℹ️
      APPLE SSD SD0128F disk0 : (121.33 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Mavericks (disk0s2) / : 120.47 GB (103.02 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
    USB Information: ℹ️
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist [Support]
    User Login Items: ℹ️
      iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Internet Plug-ins: ℹ️
      FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 [Support]
      Flash Player: Version: 15.0.0.239 - SDK 10.6 [Support]
      QuickTime Plugin: Version: 7.7.3
      Default Browser: Version: 537 - SDK 10.9
    Safari Extensions: ℹ️
      Extensions: No such file or directory
    User iTunes Plug-ins: ℹ️
      iTunes Plug-ins: No such file or directory: Version: Unknown
    3rd Party Preference Panes: ℹ️
      Flash Player  [Support]
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          6% WindowServer
          1% AppleSpell
          0% sysmond
          0% Activity Monitor
          0% imagent
    Top Processes by Memory: ℹ️
      248 MB com.apple.WebKit.WebContent
      69 MB Safari
      47 MB Twitter
      39 MB WindowServer
      26 MB mds
    Virtual Memory Information: ℹ️
      1.91 GB Free RAM
      1.33 GB Active RAM
      275 MB Inactive RAM
      526 MB Wired RAM
      2.11 GB Page-ins
      0 B Page-outs
    Diagnostics Information: ℹ️
      Nov 29, 2014, 09:13:59 PM Kernel_2014-11-29-211359_owner1s-iMac-2.panic [Details]
      Nov 29, 2014, 09:12:39 PM Kernel_2014-11-29-211239_owner1s-iMac-2.panic [Details]
      Nov 28, 2014, 06:31:12 PM Kernel_2014-11-28-183112_owner1s-iMac-2.panic [Details]
      Nov 28, 2014, 06:23:06 PM Kernel_2014-11-28-182306_owner1s-iMac-2.panic [Details]
      Nov 28, 2014, 03:07:44 PM Kernel_2014-11-28-150744_owner1s-iMac-2.panic [Details]
      Nov 28, 2014, 03:03:16 PM Kernel_2014-11-28-150316_owner1s-iMac-2.panic [Details]
      Nov 28, 2014, 01:39:08 PM Kernel_2014-11-28-133908_owner1s-iMac-2.panic [Details]
      Nov 27, 2014, 05:35:04 PM Kernel_2014-11-27-173504_owner1s-iMac-2.panic [Details]
      Nov 16, 2014, 09:57:33 PM Kernel_2014-11-16-215733_owner1s-iMac-2.panic [Details]
      Nov 11, 2014, 05:08:59 PM Kernel_2014-11-11-170859_owner1s-iMac-2.panic [Details]
      Nov 8, 2014, 10:07:50 AM Kernel_2014-11-08-100750_owner1s-iMac-2.panic [Details]
      Nov 7, 2014, 10:51:50 PM Kernel_2014-11-07-225150_owner1s-iMac-2.panic [Details]

    The kernel is using excessive processor cycles. Below are some possible causes for the condition.
    Throttling
    When it gets high temperature readings from the hardware, or low voltage readings from the battery of a MacBook, the kernel may try to compensate by interrupting the processor(s) to slow them down and reduce power consumption. This condition can be due to:
    ☞ a buildup of dust on the logic board
    ☞ high ambient temperature
    ☞ a worn-out or faulty battery in a portable
    ☞ the malfunction of a cooling fan, a temperature sensor, a voltage sensor, or some other internal component
    Note that if the problem is caused by a sensor, there may be no actual overheating or undervoltage.
    If the computer is portable, test with and without the AC adapter connected. If kernel_task hogs the processor only on AC power, charging is causing the machine to heat up. That behavior may be normal for some models. CPU usage should drop when charging is complete.
    Apple Diagnostics or the Apple Hardware Test, though not very reliable, is sometimes able to detect a fault. For more thorough hardware testing, make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
    If nothing is wrong with the hardware, then whatever you can do to improve cooling may help.
    Installed software
    User-installed software that includes a device driver or other kernel code may thrash the kernel. That category includes virtualization software, such as Parallels and VMware, as well as most commercial "anti-virus" products. Some system-monitoring applications, such as "iStat," can also contribute to the problem. You can test for this possibility by completely disabling or removing the software according to the developer's instructions, or starting in safe mode. Note, however, that disabling a system modification without removing it or testing in safe mode may not be as easy as you think.
    Corrupt NVRAM or SMC data
    Sometimes the problem is cleared up by resetting the NVRAM or the SMC.
    External display
    Connecting an external LCD display to some MacBook Pro models while the lid is open may cause this issue. If applicable, test by closing the lid or disconnecting the display. You might get better results with a newer LED display.

  • My Macbook Air 11" (mid 2013 upgraded with Yosemite 10.10.1) freezes at 30% or 50% when booting.

    I have tried SMC and PRAM resets at boot up but still have the problem.
    I can start in safe mode OK.
    Any ideas welcome.
    Thanks

    Thanks Ogelthorpe here is the report:
    Problem description:
    freezes at 50% when booting
    EtreCheck version: 2.0.11 (98)
    Report generated 22 November 2014 15:15:59 GMT
    Hardware Information: ℹ️
      MacBook Air (11-inch, Mid 2013) (Verified)
      MacBook Air - model: MacBookAir6,1
      1 1.3 GHz Intel Core i5 CPU: 2-core
      4 GB RAM Not upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1600 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1600 MHz ok
      Bluetooth: Good - Handoff/Airdrop2 supported
      Wireless:  en0: 802.11 a/b/g/n/ac
    Video Information: ℹ️
      Intel HD Graphics 5000 -
      Color LCD 1366 x 768
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Uptime: 3:56:0
    Disk Information: ℹ️
      APPLE SSD TS0128F disk0 : (121.33 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD (disk1) /  [Startup]: 120.10 GB (36.25 GB free)
      Core Storage: disk0s2 120.47 GB Online
    USB Information: ℹ️
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /System/Library/Extensions
      [not loaded] net.tunnelblick.tap (2780) Support
      [not loaded] net.tunnelblick.tun (2780) Support
    Problem System Launch Daemons: ℹ️
      [failed] com.apple.watchdogd.plist
    Launch Agents: ℹ️
      [not loaded] com.google.keystone.agent.plist Support
      [invalid?] com.kaseya.uninstall.plist Support
      [not loaded] com.oracle.java.Java-Updater.plist Support
    Launch Daemons: ℹ️
      [not loaded] com.adobe.fpsaud.plist Support
      [not loaded] com.google.keystone.daemon.plist Support
      [not loaded] com.microsoft.office.licensing.helper.plist Support
      [not loaded] com.oracle.java.Helper-Tool.plist Support
      [not loaded] com.oracle.java.JavaUpdateHelper.plist Support
    User Launch Agents: ℹ️
      [invalid?] com.citrixonline.GoToMeeting.G2MUpdate.plist Support
    User Login Items: ℹ️
      UNKNOWN UNKNOWN (missing value)
      iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      Dropbox UNKNOWN (missing value)
      KUsrTsk UNKNOWN (missing value)
    Internet Plug-ins: ℹ️
      FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
      Default Browser: Version: 600 - SDK 10.10
      o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
      SharePointBrowserPlugin: Version: 14.2.0 - SDK 10.6 Support
      googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
      Silverlight: Version: 5.1.30317.0 - SDK 10.6 Support
      JavaAppletPlugin: Version: Java 7 Update 71 Check version
    User Internet Plug-ins: ℹ️
      CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
      WebEx64: Version: 1.0 - SDK 10.6 Support
    Safari Extensions: ℹ️
      AdBlock
      Translate
    3rd Party Preference Panes: ℹ️
      Flash Player  Support
      Java  Support
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          2% WindowServer
          1% fontd
          0% AppleSpell
          0% notifyd
          0% nbagent
    Top Processes by Memory: ℹ️
      421 MB Safari
      292 MB com.apple.WebKit.WebContent
      69 MB WindowServer
      60 MB ocspd
      43 MB CalendarAgent
    Virtual Memory Information: ℹ️
      1.59 GB Free RAM
      1.72 GB Active RAM
      477 MB Inactive RAM
      499 MB Wired RAM
      738 MB Page-ins
      0 B Page-outs

  • Macbook air 2014 is 2013 mid?

    I bought macbook air in russian apple online store 1 month ago. Now I open settings and see that macbook air is mid 2013...
    Why is that?
    Is it normal?
    < Personal Infromation Edited By Host  >

    Weird - I thought I posted an answer to this already. The i7 model wasn't updated, just the core i5 model so it is indeed a mid 2013 computer.
    It's a bad idea to include personal information - like a computer serial number - in your post. I've asked a moderator to edit the post to remove it.

  • MacBook Pro 15-inch Early 2011 vs MacBook Air 13-inch 2013

         Hello. I currently own a MacBook Pro 15-inch, early 2011 model. It has 8 GB of RAM, a quad-core, 2.3 GHz i7 processor, hi-res, anti-glare display, an AMD 6750m and Intel HD 3000. I bought it off of an Apple product store on Ebay about 3 and a half months ago. It was 1,350$. It was in perfect condition when I bought it, and it still is. I'm really into producing music, and I use Reason 6.5. I also do some other small things on my laptop, like word-processing, web-browsing and I bring it to school everyday. I was wandering if I should sell this laptop on Ebay, and buy a brand-new Macbook Air, 13-inch, 2013 model. The laptop is a little thick and heavy, and its battery-life is nothing compared to the MacBook Air. I really value battery-life I would probably upgrade the RAM to 8 gigs, and maybe upgrade the processor to 1.7 GHz, maybe upgrade the SSD to 256, but I might not. I was wandering if this would be a good idea. How much would I be able to sell this laptop for on Ebay? Is the MacBook Air weaker or stronger than the laptop I am using now? Screen real estate is something that matters a lot when using a music program, which is why I initially went for this laptop. Now, since the MacBook Air is smaller, I know that it displays just as much as this laptop does, so I don't think that the screen size would be that big of a problem. I am thinking about saving up for a 27-inch iMac, which would then be my primary machine, but if I were able to buy one, it wouldn't be for awhile. Anyways, Thanks to anybody who can help me! 

    Sky Sailing
    Is the MacBook Air weaker or stronger than the laptop I am using now
    Its stronger in alloy form factor, slim design with only ONE moving part, no HD to crash from mechanical failure of impact etc.
    Ive got an Imac and current Air, and owned several Air, the air is the hands down choice for myself and I wouldnt part with it for any amount of money.  Also own a couple macbook Pro, new and older one i rebuilt.
    Here is an excellent video comparison between the 11” I5 vs. I7 2013 Macbook Air.
    http://www.apple-tubes.com/apple-macbook-air-11-mid-2013-haswell-i5-vs-i7-compar ison/
    http://www.anandtech.com/show/7113/2013-macbook-air-core-i5-4250u-vs-core-i7-465 0u/2
    I5 vs. I7 performance 13” Macbook Air 2013
    Boot performance
    11.7 I5 ……11.4 I7
      Cinebench 
    1.1 I5….1.41 I7
    IMovie Import and Opt.
    6.69 I5….5.35 I7
      IMovie Export 
    10.33 I5…8.20 I7
    Final Cut Pro X
    21.47 I5…17.71 I7
      Adobe Lightroom 3 Export 
    25.8 I5….31.8 I7
    Adobe Photoshop CS5 Performance
    27.3 I5…22.6 I7
    Macbook Air:
    Only one moving part, ultrafast boot time SSD, the full power of laptop with the weight of an Ipad (close).
    Air is the only Mac that has Haswell, 802ac wifi, and incredible 12hr. batt life in 13" I5. HOWEVER NOW the new Pro have 802ac wifi
    Recommend buying the Air with 8gig Ram.
    Pack around a regular laptop around about 20 days, then an Air, .....after that the standard laptops stays at home.    
    Only one moving part, the fan. No moving HD heads to crash or moving platters.  Runs a LOT cooler than anything else out there (which = durability).  Heater is a killer on a scale of 10X over that of accidents.
    Also the AIR has far fewer parts to fail inside than a standard laptop.  Really only a few replacement parts
    The speakers on the Air, contrary to what most people would assume, are much louder than on the macbook Pro.
    The Air in general is faster due to the SSD, also if you have a 802ac Router (i.e. Airport Extreme) then the Air over wifi is a LOT faster.
    If youre going to be dragging a notebook around campus all the time, the Air makes things a lot more lovely.
    The FINAL consideration of course is your application USE, and needs regarding same (see specs and video above)
    The new Air, NOW with Mavericks is just 'king of the hill'. Nothing touches it

  • Macbook pro 15-inch 2011 vs. MacBook Air 13-inch 2013

    Hello. I currently own a MacBook Pro 15-inch, early 2011 model. It has 8 GB of RAM, a quad-core, 2.3 GHz i7 processor, hi-res, anti-glare display, an AMD 6750m and Intel HD 3000. I bought it off of an Apple product store on Ebay about 3 and a half months ago. It was 1,350$. It was in perfect condition when I bought it, and it still is. I'm really into producing music, and I use Reason 6.5. I also do some other small things on my laptop, like word-processing, web-browsing and I bring it to school everyday. I was wandering if I should sell this laptop on Ebay, and buy a brand-new Macbook Air, 13-inch, 2013 model. The laptop is a little thick and heavy, and its battery-life is nothing compared to the MacBook Air. I really value battery-life I would probably upgrade the RAM to 8 gigs, and maybe upgrade the processor to 1.7 GHz, maybe upgrade the SSD to 256, but I might not. I was wandering if this would be a good idea. How much would I be able to sell this laptop for on Ebay? Is the MacBook Air weaker or stronger than the laptop I am using now? Screen real estate is something that matters a lot when using a music program, which is why I initially went for this laptop. Now, since the MacBook Air is smaller, I know that it displays just as much as this laptop does, so I don't think that the screen size would be that big of a problem. I am thinking about saving up for a 27-inch iMac, which would then be my primary machine, but if I were able to buy one, it wouldn't be for awhile. Anyways, Thanks to anybody who can help me!

    Sky Sailing
    Is the MacBook Air weaker or stronger than the laptop I am using now?
    Nice to see you again.
    The macbook Air is 'stronger' than the Pro only in terms of containing MUCH fewer parts, far less to fault, easier to repair
    both have unibody aluminum alloy frames.

  • My macbook air (version 10.9.4) display flickers, has random tabs and windows opening, and there are random ads almost everywhere. All this happens when I am using safari. What can I do?

    My macbook air (version 10.9.4) display flickers, has random tabs and windows opening, and there are random ads almost everywhere. All this happens when I am using safari. What can I do?

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/(de|[nst]):/p;' ' {sub(/^ +/,"")};/r:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,Inter,iTu,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • I have a MacBook Air 13 , mid 2009 & am trying to get it to show power point on a projector, I have the correct plug. Do I have to pst some keys to fire up the projector ? Kevin

    I have a MacBook Air 13 , mid 2009 & am trying to get it to show power point on a projector, I have the correct plug. Do I have to push some keys to fire up the projector ? Kevin

    The short answer is no. You will, however need to fire up the projector manually, and then change the input for the projector (if it hasn't already) to that of the computer. Once the projector is fired up and displaying an image of the screen of your computer, simply start the powerpoint as you normally would, since the projector will mirror your screen. If you will be talking for long periods of time without pressing any keys, or advancing the presentation, you might want to change the energy saver preferences to stop the computer from going to sleep as fast as it would. Does all this help?
    Best of luck!

  • How can i verify my MacBook air 13 mid 2012 by my serial no?

    Hey guys!
    This is swapan. I'm new in this community. And also I'm new user of MacBook air. Recently I've got a MacBook air 13 mid 2012.
    That's serial no is C02KG11JDRVG on it's back physical part and also in about this mac option.
    It shows it has core i7 dual core 2.0ghz intel processor, 8GB of ram, 512 SSD in about this mac > more info.
    How can i confirm that it is real one? Please help me about this regard.
    Advance thanks to all the members of this community and existing MacBook air users and all apple fans.
    Regards
    Swapan.

    From here i checked my product with my serial no.

  • I find the iphone 5s photographs and videos very difficult to copy into my PC after upgrade to ios 7.1.2. Previously I was able to open it in my computer (Windows 8.1 loaded on macbook air 13" July 2013) model, within iphone ikon - DCIM.  Why not now

    After upgrade of my iphone 5s to ios 7.1.2, I am not able to open iphone ikon- Internal Storage-DCIM - in My computer
    The folder is shown as empty
    I use Window 8.1 loaded on my Macbook air 13" July 2013 model
    Should I stop using iphone for photography and use my Canon DSLR
    Taking photo is easy with iphone 5s.  But retreiving the photo/video
    is time consuming and I feel is a waste of time
    Any way out?

    Is your phone unlocked when your importing the pictures.
    This sound more like a window 8 issue.

  • Lcd Needs to Be replaced on macbook air 13 mid 2012 model a1466. Is an screen from MBA 13 mid 2011 model a1369 also compatible?

    Lcd Needs to Be replaced on macbook air 13 mid 2012 model a1466. Is an screen from MBA 13 mid 2011 model a1369 also compatible?

    Well that's only a possibility, not likely. I'll stick with Mac as much as I can, which I imagine will mostly be ok. If I have to, I'll use their computers in class and do PC homework assignments from home on my more powerful iMac. The only thing I really thought about before buying it was its portability and the fact that I won't be using it for actual programming jobs after school. This is merely to get me through school.

Maybe you are looking for

  • HP OfficeJet 6500 (E709a) network problems

    Hello. I have a new HP OfficeJet 6500 (E709a) Its all in one. I am trying to use it through a network in my home. It is already working for 1 computer, a wireless laptop BUT not for me, a ethernet wired desktop. PC: Windows 7 64 bit Laptop: Windos Vi

  • Can't display downloads from applications

    Can't display downloads in the application folder but can open them from dock. I have a Mac mini & have upgraded the operating system to OSX10.6.3 so I could use tubrotax. Any solutions?

  • Variable Syntax issue

    Hi Folks, I am trying to build a file delete function into my page. When I hard code the path values it works fine. When I try to pass in values it does not work. Here is the code: <c:set var="Dfolder_name" value="${sessionScope.Doc_Folder}"/> <c:set

  • Error building kdebase4-svn from AUR

    Anytime I try to build kdebase4-svn from AUR, I get the following error: [ 88%] Building CXX object kcontrol/access/CMakeFiles/kdeinit_kaccess.dir/kaccess.o In Datei, eingefügt von /tmp/yaourt-tmp-arch/aur-kdebase4-workspace-svn/kdebase4-workspace-sv

  • Trasaction code for invoices detail which has hit the WBS element

    Hi All Usually my users receive a list of assets which were capitalized from AUC account through Project system. Generally charges are posted to WBS element and then users capitalize assets using that WBS element through settlement. Users have been a